coreboot.git - my copy of coreboot

Age	Commit message (Expand)	Author
2017-03-28	vboot: Move remaining features out of vendorcode/google/chromeos	Julius Werner
2017-03-28	vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by default	Julius Werner
2017-03-24	mainboard/google/snappy: Update DPTF settings	Wisley Chen
2017-03-22	mainboard/google/reef: add nasher variant	YH Lin
2017-03-21	google/pyro: Update DPTF settings	Kevin Chiu
2017-03-21	google/sand: Add Raydium touchscreen device	Katherine Hsieh
2017-03-20	mainboard/google/snappy: Update _hid name for weida touchscreen	Wisley Chen
2017-03-19	mb/google/reef: Remove CPU throttling effect of the charger sensor	Sumeet Pawnikar
2017-03-16	mainboard/google/reef: Increase PL2 Max to 15W	Tim Chen
2017-03-15	mainboard/google/reef: Add FPF_STATUS FMAP region	Andrey Petrov
2017-03-14	google/sand: Remove support for tablet mode switch	Katherine Hsieh
2017-03-10	google/sand: Add devicetree.cb file for sand	Katherine Hsieh
2017-03-10	mainboard/google/reef: Modify TCPU, TSR2 and TRT table	Tim Chen
2017-03-10	mainboard/google/reef: Configure SDCARD card detect pin	Venkateswarlu Vinjamuri
2017-03-09	mainboard/google/reef: increase pre cbmem console size for Chrome OS	Aaron Durbin
2017-03-09	google/pyro: Update DPTF settings	Kevin Chiu
2017-03-08	mainboard/google/snappy: Override USB2 phy setting	Wisley Chen
2017-02-25	mainboard/google/reef: keep LPSS_UART2_TXD high in suspend state	Aaron Durbin
2017-02-22	acpi: Add ACPI_ prefix to IRQ enum and struct names	Furquan Shaikh
2017-02-20	drivers/i2c: Use I2C HID driver for wacom devices	Furquan Shaikh
2017-02-20	mainboard/{google,intel}: Change config option selection	Furquan Shaikh
2017-02-20	mainboard/google/reef: Remove config DRIVERS_GENERIC_GPIO_REGULATOR	Furquan Shaikh
2017-02-15	mainboard/google/reef: add sand variant	YH Lin
2017-02-13	mainboard/google/snappy: Update DPTF settings	Wisley Chen
2017-02-11	mainboard/google/reef: Increase PL1 sampling period	Sumeet Pawnikar
2017-02-07	mainboards/google/reef: Add support for tablet mode switch.	Gwendal Grignou
2017-02-04	Revert "google/pyro: remove Wacom touchscreen probed flag"	Kevin Chiu
2017-02-03	mainboard/google/snappy: Set PL2 override to 15000mW	Harry Pan
2017-01-31	mainboard/google/reef: remove NHLT DMIC 1ch and 2ch configuration	Sathyanarayana Nujella
2017-01-31	mainboard/google/reef: Set edge triggered interrupt for GPIO_22	Vaibhav Shankar
2017-01-29	mainboard/google/snappy: Update WDT touchscreen device	Furquan Shaikh
2017-01-29	mainboard/google/pryo: Update touchscreen device ACPI nodes	Furquan Shaikh
2017-01-29	i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPI	Furquan Shaikh
2017-01-29	mainboard/google/reef: Set IOSSTATE for trackpad I2C GPIOs	Vaibhav Shankar
2017-01-26	google/pyro: Add USB2 phy setting override	Kevin Chiu
2017-01-26	google/pyro: Disable Wacom touchscreen probed	Kevin Chiu
2017-01-25	google/pyro: Modify Wacom touchscreen IRQ type to level-triggered	Kevin Chiu
2017-01-23	google/pyro: Update DPTF settings	Kevin Chiu
2017-01-22	mainboard/google/reef: Increase TSR1 trigger point	Tim Chen
2017-01-21	mainboard/google/reef: remove internal pullups on PP1800_S rail	Aaron Durbin
2017-01-20	google/snappy: Add weida touchscreen support	Wisley Chen
2017-01-20	google/snappy: Use exported GPIOs and ACPI regulator for touchscreen	Wisley Chen
2017-01-19	mainboard/google/snappy: Disable unused devices	Wisley Chen
2017-01-19	mainboard/google/reef: Ignore Audio DMIC IOSSTATE	Vaibhav Shankar
2017-01-17	Revert "mainboard/google/snappy: Add PowerResource for ELAN touchscreen"	Martin Roth
2017-01-17	mainboard/google/reef: Ignore SPI IOSTANDBY	Lijian Zhao
2017-01-17	mainboard/google/snappy: Add PowerResource for ELAN touchscreen	Wisley Chen
2017-01-13	google/pyro: Add ELAN touch screen support	Kevin Chiu
2017-01-03	google/snappy: Update DPTF settings	Wisley Chen
2017-01-03	mainboard/google/reef: Update DPTF parameters EVT1_v0.3	Tim Chen
2016-12-17	google/reef: Use exported GPIOs and ACPI regulator for touchscreen	Furquan Shaikh
2016-12-16	drivers/i2c/generic: Allow mainboards to export reset and enable GPIOs	Furquan Shaikh
2016-12-15	mainboard/google/reef: clear normal MRC cache on recovery retrain	Aaron Durbin
2016-12-15	google/reef: Remove VARIANT_DIR definition	Martin Roth
2016-12-13	mainboard/google/reef: implement phase enforcement pin	Aaron Durbin
2016-12-12	google/pyro: Set PL2 override to 15000mW	Kevin Chiu
2016-12-09	mainboard/google/reef: fill in NHLT ACPI OEM header fields	Aaron Durbin
2016-12-09	mainboard/google/reef: add board SKU'ing support	Aaron Durbin
2016-12-08	mainboard/google/reef: Set PL2 override to 15000mW	Sumeet Pawnikar
2016-12-07	mainboard/google/reef: adjust chromeos.fmd regions	Aaron Durbin
2016-12-02	google/pyro: set i2c bus timings by rise/fall times	Kevin Chiu
2016-12-02	mainboard/google/reef: Add all DMIC endpoints	Sathyanarayana Nujella
2016-12-01	mainboard/google/reef: allow variants to modify nhlt oem revision	Aaron Durbin
2016-12-01	lib/nhlt: add support for setting the oem_revision	Aaron Durbin
2016-11-30	mainboard/google/snappy: Tune i2c frequency to 400 Khz	Wisley Chen
2016-11-30	mainboard/reef: Add RW_VAR_MRC_CACHE	Andrey Petrov
2016-11-29	google/pyro: disable unused devices	Kevin Chiu
2016-11-29	mainboard/google/snappy: Add digitizer device to devicetree	Wisley Chen
2016-11-29	mainboard/google/reef: Set DPTF CPU passive temperature trip point to 95C	Sumeet Pawnikar
2016-11-28	mainboard/google/reef: Set PL1 MAX power limit value to 12W	Tim Chen
2016-11-23	google/pyro: Update DPTF settings	Kevin Chiu
2016-11-20	mainboard/google/reef: Update DPTF parameters provided from thermal team	Tim Chen
2016-11-18	google/chromeec: Add common infrastructure for boot-mode switches	Furquan Shaikh
2016-11-17	google/snappy: Update DPTF settings	Wisley Chen
2016-11-17	mainboard/google/reef: disable unused devices	Jagadish Krishnamoorthy
2016-11-17	mainboard/google/reef: set i2c bus timings by rise/fall times	Aaron Durbin
2016-11-16	mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pin	Sathyanarayana Nujella
2016-11-11	mainboard/google/snappy: Configure PERST pin	Wisley Chen
2016-11-11	google/snappy: update timing of sdmode toggling	Wisley Chen
2016-11-11	mainboard/google/snappy: Set PL1 override to 12000mW	Wisley Chen
2016-11-10	mainboard/google/reef: Add digitizer device to devicetree	Furquan Shaikh
2016-11-10	mainboard/google/reef: Tune digitizer I2C frequency to 400kHz	Furquan Shaikh
2016-11-10	drivers/i2c/wacom: Make the driver more generic	Furquan Shaikh
2016-11-10	mainboard/google/pyro: Set PL1 override to 12000mW	Kevin Chiu
2016-11-10	google/pyro: Tune i2c frequency to 400 Khz	Kevin Chiu
2016-11-10	google/pyro: update timing of sdmode toggling	Kevin Chiu
2016-11-10	mainboard/google/pyro: Configure PERST pin	Kevin Chiu
2016-11-10	mainboard/google/reef: Add support for RECOVERY_MRC_CACHE	Furquan Shaikh
2016-11-09	mainboard/google/reef: use common google smbios mainboard version	Aaron Durbin
2016-11-09	google/pyro: Update WACOM touchscreen ACPI _HID	Janice Li
2016-11-07	mainboard/google/reef: update DMIC related pins configuration	Sathyanarayana Nujella
2016-11-04	reef: tune trackpad i2c frequency to 400kHz	Aaron Durbin
2016-11-04	reef: tune tpm i2c frequency to 400kHz	Aaron Durbin
2016-10-28	mainboard/google/reef: allow variants to override NHLT OEM strings	Aaron Durbin
2016-10-28	mainboard/google/reef: update comment for DMIC config usage	Aaron Durbin
2016-10-27	mainboard/google/reef: drop disabling periodic training for micron	Aaron Durbin
2016-10-27	mainboard/google/reef: clarify memory part number details	Aaron Durbin
2016-10-26	google/reef/variants/pyro: Use WCOM Touchscreen driver	Furquan Shaikh
2016-10-25	mainboard/google/reef: Add PowerResource for ELAN touchscreen	Furquan Shaikh
2016-10-20	mainboard/google/reef: add snappy variant	Wisley Chen