summaryrefslogtreecommitdiff
path: root/src/mainboard/google/reef
AgeCommit message (Expand)Author
2016-12-15mainboard/google/reef: clear normal MRC cache on recovery retrainAaron Durbin
2016-12-15google/reef: Remove VARIANT_DIR definitionMartin Roth
2016-12-13mainboard/google/reef: implement phase enforcement pinAaron Durbin
2016-12-12google/pyro: Set PL2 override to 15000mWKevin Chiu
2016-12-09mainboard/google/reef: fill in NHLT ACPI OEM header fieldsAaron Durbin
2016-12-09mainboard/google/reef: add board SKU'ing supportAaron Durbin
2016-12-08mainboard/google/reef: Set PL2 override to 15000mWSumeet Pawnikar
2016-12-07mainboard/google/reef: adjust chromeos.fmd regionsAaron Durbin
2016-12-02google/pyro: set i2c bus timings by rise/fall timesKevin Chiu
2016-12-02mainboard/google/reef: Add all DMIC endpointsSathyanarayana Nujella
2016-12-01mainboard/google/reef: allow variants to modify nhlt oem revisionAaron Durbin
2016-12-01lib/nhlt: add support for setting the oem_revisionAaron Durbin
2016-11-30mainboard/google/snappy: Tune i2c frequency to 400 KhzWisley Chen
2016-11-30mainboard/reef: Add RW_VAR_MRC_CACHEAndrey Petrov
2016-11-29google/pyro: disable unused devicesKevin Chiu
2016-11-29mainboard/google/snappy: Add digitizer device to devicetreeWisley Chen
2016-11-29mainboard/google/reef: Set DPTF CPU passive temperature trip point to 95CSumeet Pawnikar
2016-11-28mainboard/google/reef: Set PL1 MAX power limit value to 12WTim Chen
2016-11-23google/pyro: Update DPTF settingsKevin Chiu
2016-11-20mainboard/google/reef: Update DPTF parameters provided from thermal teamTim Chen
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
2016-11-17google/snappy: Update DPTF settingsWisley Chen
2016-11-17mainboard/google/reef: disable unused devicesJagadish Krishnamoorthy
2016-11-17mainboard/google/reef: set i2c bus timings by rise/fall timesAaron Durbin
2016-11-16mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pinSathyanarayana Nujella
2016-11-11mainboard/google/snappy: Configure PERST pinWisley Chen
2016-11-11google/snappy: update timing of sdmode togglingWisley Chen
2016-11-11mainboard/google/snappy: Set PL1 override to 12000mWWisley Chen
2016-11-10mainboard/google/reef: Add digitizer device to devicetreeFurquan Shaikh
2016-11-10mainboard/google/reef: Tune digitizer I2C frequency to 400kHzFurquan Shaikh
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
2016-11-10mainboard/google/pyro: Set PL1 override to 12000mWKevin Chiu
2016-11-10google/pyro: Tune i2c frequency to 400 KhzKevin Chiu
2016-11-10google/pyro: update timing of sdmode togglingKevin Chiu
2016-11-10mainboard/google/pyro: Configure PERST pinKevin Chiu
2016-11-10mainboard/google/reef: Add support for RECOVERY_MRC_CACHEFurquan Shaikh
2016-11-09mainboard/google/reef: use common google smbios mainboard versionAaron Durbin
2016-11-09google/pyro: Update WACOM touchscreen ACPI _HIDJanice Li
2016-11-07mainboard/google/reef: update DMIC related pins configurationSathyanarayana Nujella
2016-11-04reef: tune trackpad i2c frequency to 400kHzAaron Durbin
2016-11-04reef: tune tpm i2c frequency to 400kHzAaron Durbin
2016-10-28mainboard/google/reef: allow variants to override NHLT OEM stringsAaron Durbin
2016-10-28mainboard/google/reef: update comment for DMIC config usageAaron Durbin
2016-10-27mainboard/google/reef: drop disabling periodic training for micronAaron Durbin
2016-10-27mainboard/google/reef: clarify memory part number detailsAaron Durbin
2016-10-26google/reef/variants/pyro: Use WCOM Touchscreen driverFurquan Shaikh
2016-10-25mainboard/google/reef: Add PowerResource for ELAN touchscreenFurquan Shaikh
2016-10-20mainboard/google/reef: add snappy variantWisley Chen
2016-10-18mainboard/google/reef: Configure PERST pin for reef DVTVaibhav Shankar
2016-10-16mainboard/google/reef: Set PL1 override to 12000mWVenkateswarlu Vinjamuri
2016-10-10google/reef: update timing of sdmode togglingSathyanarayana Nujella
2016-10-07google/reef/variants/pyro: Add support for GPIO output polarityMartin Roth
2016-10-07x86/acpi_device: Add support for GPIO output polarityFurquan Shaikh
2016-10-07mainboard/google/reef: add pyro variant.Kevin Chiu
2016-10-01mainboard/google/reef: Update DPTF policy temp. values for CPUSumeet Pawnikar
2016-10-01mainboard/google/reef: unconditionally set MAINBOARD_FAMILYAaron Durbin
2016-09-30google/reef: Fix default values in KconfigMartin Roth
2016-09-28google/reef: Mark touchpad and touchscreen as probed devicesDuncan Laurie
2016-09-26mainboards,ec: provide common declaration for mainboard_ec_init()Aaron Durbin
2016-09-26mainboards/google/reef: use chromeec's ASL lid switch implementationAaron Durbin
2016-09-26soc/intel/apollolake: provide power button ACPI deviceAaron Durbin
2016-09-21mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
2016-09-19Revert "mainboard/google/reef: Enable cr50 TPM interrupt"Duncan Laurie
2016-09-19mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
2016-09-19mainboard/google/reef: Configure WLAN as wake sourceVaibhav Shankar
2016-09-15mainboard/reef: add variant support to ASL codeAaron Durbin
2016-09-15google/reef: Remove setting of GPIO_TIER1_SCI enable bitShaunak Saha
2016-09-14mainboards/apollolake: Set RAPL power limit PL1 value to 12W.Sumeet Pawnikar
2016-09-14mainboard/google/reef: Configure PERST_0 pinVaibhav Shankar
2016-09-13mainboard/google/reef: add MKBP EC event as SCI event.Gwendal Grignou
2016-09-12mainboard/google/reef: Enable lpss s0ixVenkateswarlu Vinjamuri
2016-09-12mainboard/google/reef: Disable CLKREQ of unused PCIe root portsVenkateswarlu Vinjamuri
2016-09-08mainboard/google/reef: move devicetree to baseboardAaron Durbin
2016-09-07mainboard/google/reef: Enable audio clock and power gateVenkateswarlu Vinjamuri
2016-09-06google/reef: Enable I2C TPMDuncan Laurie
2016-09-06google/reef: Enable 20K pull ups for LPC CLKRUN and LAD0:3 linesShamile Khan
2016-09-06mainboard/google/reef: drop remaining proto board referencesAaron Durbin
2016-09-06mainboard/google/reef: add baseboard nhlt configurationAaron Durbin
2016-09-06mainboard/google/reef: add baseboard memory configurationAaron Durbin
2016-09-06mainboard/google/reef: provide cros_gpio variant APIAaron Durbin
2016-09-06mainboard/google/reef: consolidate gpio related defines to one placeAaron Durbin
2016-09-06mainboard/google/reef: declare mainboard_ec_init() in each C fileAaron Durbin
2016-09-06mainboard/google/reef: add variant API for board_id and gpioAaron Durbin
2016-09-04google/reef: Fix indent in devicetree.cbDuncan Laurie
2016-09-04mainboard/google/reef: provide baseboard and variant conceptsAaron Durbin
2016-09-04mainboard/google/reef: prepare sharing directory for variantsAaron Durbin
2016-09-04mainboard/google/reef: correct EC ASL includesAaron Durbin
2016-09-04mainboard/google/reef: remove unused gpio.h macrosAaron Durbin
2016-09-02drivers/intel/fsp2_0: Make FSP Headers Consumable out of BoxBrandon Breitenstein
2016-09-01mainboard/google/reef: drop proto gpio supportAaron Durbin
2016-09-01mainboard/google/reef: add pen connectionsAaron Durbin
2016-09-01mainboard/google/reef: fix polarity of FP_INTAaron Durbin
2016-09-01mainboard/google/reef: add new memory SKUsAaron Durbin
2016-09-01mainboard/google/reef: support WLAN_PE_RSTAaron Durbin
2016-08-31mainboard/*/Kconfig: Set GBB_HWID where missingPatrick Georgi
2016-08-31soc/intel/apollolake: Disable Periodic Retraining per-SKUAndrey Petrov
2016-08-30mainboard/google/reef: set SLP_S3_L assertion width to 28msAaron Durbin
2016-08-24google/reef: Tune eMMC DLL settings for reef evtChiranjeevi Rapolu
2016-08-20google/reef: Save DIMM info from SMBIOS memory HOBRavi Sarawadi
2016-08-19google/reef: Configure NFC gpios correctly before entering sleepFurquan Shaikh
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 14:13:02 +0000