summaryrefslogtreecommitdiff
path: root/src/mainboard/google/reef
AgeCommit message (Expand)Author
2017-06-05google/reef: Add coralPatrick Georgi
2017-05-12mainboard/google/reef: Config needed GPIO for pull-up WALijian Zhao
2017-05-09google/sand: Add keyboard backlight supportKatherine Hsieh
2017-05-08mb/google/reef: enable SAR and DSARWei-Ning Huang
2017-05-05mainboard/google/sand: Update DPTF parameters provided from thermal teamKatherine Hsieh
2017-04-24mainboard/google/reef: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
2017-04-24mainboard/google/reef: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
2017-04-24Kconfig: provide MAINBOARD_HAS_TPM_CR50 optionAaron Durbin
2017-04-13mainboard/google/reef: Configure sdcard card detect (CD) pin GPIO_177Venkateswarlu Vinjamuri
2017-04-13mainboard/google/snappy: Increase weida touchscreen reset delayWisley Chen
2017-04-05mainboard/google/reef: increase trackpad data hold timeAaron Durbin
2017-03-29mainboard/google/reef: turn off DMIC_CLK_B1 in S0ixSathyanarayana Nujella
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
2017-03-24mainboard/google/snappy: Update DPTF settingsWisley Chen
2017-03-22mainboard/google/reef: add nasher variantYH Lin
2017-03-21google/pyro: Update DPTF settingsKevin Chiu
2017-03-21google/sand: Add Raydium touchscreen deviceKatherine Hsieh
2017-03-20mainboard/google/snappy: Update _hid name for weida touchscreenWisley Chen
2017-03-19mb/google/reef: Remove CPU throttling effect of the charger sensorSumeet Pawnikar
2017-03-16mainboard/google/reef: Increase PL2 Max to 15WTim Chen
2017-03-15mainboard/google/reef: Add FPF_STATUS FMAP regionAndrey Petrov
2017-03-14google/sand: Remove support for tablet mode switchKatherine Hsieh
2017-03-10google/sand: Add devicetree.cb file for sandKatherine Hsieh
2017-03-10mainboard/google/reef: Modify TCPU, TSR2 and TRT tableTim Chen
2017-03-10mainboard/google/reef: Configure SDCARD card detect pinVenkateswarlu Vinjamuri
2017-03-09mainboard/google/reef: increase pre cbmem console size for Chrome OSAaron Durbin
2017-03-09google/pyro: Update DPTF settingsKevin Chiu
2017-03-08mainboard/google/snappy: Override USB2 phy settingWisley Chen
2017-02-25mainboard/google/reef: keep LPSS_UART2_TXD high in suspend stateAaron Durbin
2017-02-22acpi: Add ACPI_ prefix to IRQ enum and struct namesFurquan Shaikh
2017-02-20drivers/i2c: Use I2C HID driver for wacom devicesFurquan Shaikh
2017-02-20mainboard/{google,intel}: Change config option selectionFurquan Shaikh
2017-02-20mainboard/google/reef: Remove config DRIVERS_GENERIC_GPIO_REGULATORFurquan Shaikh
2017-02-15mainboard/google/reef: add sand variantYH Lin
2017-02-13mainboard/google/snappy: Update DPTF settingsWisley Chen
2017-02-11mainboard/google/reef: Increase PL1 sampling periodSumeet Pawnikar
2017-02-07mainboards/google/reef: Add support for tablet mode switch.Gwendal Grignou
2017-02-04Revert "google/pyro: remove Wacom touchscreen probed flag"Kevin Chiu
2017-02-03mainboard/google/snappy: Set PL2 override to 15000mWHarry Pan
2017-01-31mainboard/google/reef: remove NHLT DMIC 1ch and 2ch configurationSathyanarayana Nujella
2017-01-31mainboard/google/reef: Set edge triggered interrupt for GPIO_22Vaibhav Shankar
2017-01-29mainboard/google/snappy: Update WDT touchscreen deviceFurquan Shaikh
2017-01-29mainboard/google/pryo: Update touchscreen device ACPI nodesFurquan Shaikh
2017-01-29i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPIFurquan Shaikh
2017-01-29mainboard/google/reef: Set IOSSTATE for trackpad I2C GPIOsVaibhav Shankar
2017-01-26google/pyro: Add USB2 phy setting overrideKevin Chiu
2017-01-26google/pyro: Disable Wacom touchscreen probedKevin Chiu
2017-01-25google/pyro: Modify Wacom touchscreen IRQ type to level-triggeredKevin Chiu
2017-01-23google/pyro: Update DPTF settingsKevin Chiu
2017-01-22mainboard/google/reef: Increase TSR1 trigger pointTim Chen
2017-01-21mainboard/google/reef: remove internal pullups on PP1800_S railAaron Durbin
2017-01-20google/snappy: Add weida touchscreen supportWisley Chen
2017-01-20google/snappy: Use exported GPIOs and ACPI regulator for touchscreenWisley Chen
2017-01-19mainboard/google/snappy: Disable unused devicesWisley Chen
2017-01-19mainboard/google/reef: Ignore Audio DMIC IOSSTATEVaibhav Shankar
2017-01-17Revert "mainboard/google/snappy: Add PowerResource for ELAN touchscreen"Martin Roth
2017-01-17mainboard/google/reef: Ignore SPI IOSTANDBYLijian Zhao
2017-01-17mainboard/google/snappy: Add PowerResource for ELAN touchscreenWisley Chen
2017-01-13google/pyro: Add ELAN touch screen supportKevin Chiu
2017-01-03google/snappy: Update DPTF settingsWisley Chen
2017-01-03mainboard/google/reef: Update DPTF parameters EVT1_v0.3Tim Chen
2016-12-17google/reef: Use exported GPIOs and ACPI regulator for touchscreenFurquan Shaikh
2016-12-16drivers/i2c/generic: Allow mainboards to export reset and enable GPIOsFurquan Shaikh
2016-12-15mainboard/google/reef: clear normal MRC cache on recovery retrainAaron Durbin
2016-12-15google/reef: Remove VARIANT_DIR definitionMartin Roth
2016-12-13mainboard/google/reef: implement phase enforcement pinAaron Durbin
2016-12-12google/pyro: Set PL2 override to 15000mWKevin Chiu
2016-12-09mainboard/google/reef: fill in NHLT ACPI OEM header fieldsAaron Durbin
2016-12-09mainboard/google/reef: add board SKU'ing supportAaron Durbin
2016-12-08mainboard/google/reef: Set PL2 override to 15000mWSumeet Pawnikar
2016-12-07mainboard/google/reef: adjust chromeos.fmd regionsAaron Durbin
2016-12-02google/pyro: set i2c bus timings by rise/fall timesKevin Chiu
2016-12-02mainboard/google/reef: Add all DMIC endpointsSathyanarayana Nujella
2016-12-01mainboard/google/reef: allow variants to modify nhlt oem revisionAaron Durbin
2016-12-01lib/nhlt: add support for setting the oem_revisionAaron Durbin
2016-11-30mainboard/google/snappy: Tune i2c frequency to 400 KhzWisley Chen
2016-11-30mainboard/reef: Add RW_VAR_MRC_CACHEAndrey Petrov
2016-11-29google/pyro: disable unused devicesKevin Chiu
2016-11-29mainboard/google/snappy: Add digitizer device to devicetreeWisley Chen
2016-11-29mainboard/google/reef: Set DPTF CPU passive temperature trip point to 95CSumeet Pawnikar
2016-11-28mainboard/google/reef: Set PL1 MAX power limit value to 12WTim Chen
2016-11-23google/pyro: Update DPTF settingsKevin Chiu
2016-11-20mainboard/google/reef: Update DPTF parameters provided from thermal teamTim Chen
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
2016-11-17google/snappy: Update DPTF settingsWisley Chen
2016-11-17mainboard/google/reef: disable unused devicesJagadish Krishnamoorthy
2016-11-17mainboard/google/reef: set i2c bus timings by rise/fall timesAaron Durbin
2016-11-16mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pinSathyanarayana Nujella
2016-11-11mainboard/google/snappy: Configure PERST pinWisley Chen
2016-11-11google/snappy: update timing of sdmode togglingWisley Chen
2016-11-11mainboard/google/snappy: Set PL1 override to 12000mWWisley Chen
2016-11-10mainboard/google/reef: Add digitizer device to devicetreeFurquan Shaikh
2016-11-10mainboard/google/reef: Tune digitizer I2C frequency to 400kHzFurquan Shaikh
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
2016-11-10mainboard/google/pyro: Set PL1 override to 12000mWKevin Chiu
2016-11-10google/pyro: Tune i2c frequency to 400 KhzKevin Chiu
2016-11-10google/pyro: update timing of sdmode togglingKevin Chiu
2016-11-10mainboard/google/pyro: Configure PERST pinKevin Chiu
2016-11-10mainboard/google/reef: Add support for RECOVERY_MRC_CACHEFurquan Shaikh