index
:
coreboot.git
macbookair5_2
macbookpro10_1
main
master
mbp101_medisable
mbp101_medisable_1
mbp82
x230
my copy of coreboot
gitea
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
/
mainboard
/
google
/
reef
Age
Commit message (
Expand
)
Author
2017-03-20
mainboard/google/snappy: Update _hid name for weida touchscreen
Wisley Chen
2017-03-19
mb/google/reef: Remove CPU throttling effect of the charger sensor
Sumeet Pawnikar
2017-03-16
mainboard/google/reef: Increase PL2 Max to 15W
Tim Chen
2017-03-15
mainboard/google/reef: Add FPF_STATUS FMAP region
Andrey Petrov
2017-03-14
google/sand: Remove support for tablet mode switch
Katherine Hsieh
2017-03-10
google/sand: Add devicetree.cb file for sand
Katherine Hsieh
2017-03-10
mainboard/google/reef: Modify TCPU, TSR2 and TRT table
Tim Chen
2017-03-10
mainboard/google/reef: Configure SDCARD card detect pin
Venkateswarlu Vinjamuri
2017-03-09
mainboard/google/reef: increase pre cbmem console size for Chrome OS
Aaron Durbin
2017-03-09
google/pyro: Update DPTF settings
Kevin Chiu
2017-03-08
mainboard/google/snappy: Override USB2 phy setting
Wisley Chen
2017-02-25
mainboard/google/reef: keep LPSS_UART2_TXD high in suspend state
Aaron Durbin
2017-02-22
acpi: Add ACPI_ prefix to IRQ enum and struct names
Furquan Shaikh
2017-02-20
drivers/i2c: Use I2C HID driver for wacom devices
Furquan Shaikh
2017-02-20
mainboard/{google,intel}: Change config option selection
Furquan Shaikh
2017-02-20
mainboard/google/reef: Remove config DRIVERS_GENERIC_GPIO_REGULATOR
Furquan Shaikh
2017-02-15
mainboard/google/reef: add sand variant
YH Lin
2017-02-13
mainboard/google/snappy: Update DPTF settings
Wisley Chen
2017-02-11
mainboard/google/reef: Increase PL1 sampling period
Sumeet Pawnikar
2017-02-07
mainboards/google/reef: Add support for tablet mode switch.
Gwendal Grignou
2017-02-04
Revert "google/pyro: remove Wacom touchscreen probed flag"
Kevin Chiu
2017-02-03
mainboard/google/snappy: Set PL2 override to 15000mW
Harry Pan
2017-01-31
mainboard/google/reef: remove NHLT DMIC 1ch and 2ch configuration
Sathyanarayana Nujella
2017-01-31
mainboard/google/reef: Set edge triggered interrupt for GPIO_22
Vaibhav Shankar
2017-01-29
mainboard/google/snappy: Update WDT touchscreen device
Furquan Shaikh
2017-01-29
mainboard/google/pryo: Update touchscreen device ACPI nodes
Furquan Shaikh
2017-01-29
i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPI
Furquan Shaikh
2017-01-29
mainboard/google/reef: Set IOSSTATE for trackpad I2C GPIOs
Vaibhav Shankar
2017-01-26
google/pyro: Add USB2 phy setting override
Kevin Chiu
2017-01-26
google/pyro: Disable Wacom touchscreen probed
Kevin Chiu
2017-01-25
google/pyro: Modify Wacom touchscreen IRQ type to level-triggered
Kevin Chiu
2017-01-23
google/pyro: Update DPTF settings
Kevin Chiu
2017-01-22
mainboard/google/reef: Increase TSR1 trigger point
Tim Chen
2017-01-21
mainboard/google/reef: remove internal pullups on PP1800_S rail
Aaron Durbin
2017-01-20
google/snappy: Add weida touchscreen support
Wisley Chen
2017-01-20
google/snappy: Use exported GPIOs and ACPI regulator for touchscreen
Wisley Chen
2017-01-19
mainboard/google/snappy: Disable unused devices
Wisley Chen
2017-01-19
mainboard/google/reef: Ignore Audio DMIC IOSSTATE
Vaibhav Shankar
2017-01-17
Revert "mainboard/google/snappy: Add PowerResource for ELAN touchscreen"
Martin Roth
2017-01-17
mainboard/google/reef: Ignore SPI IOSTANDBY
Lijian Zhao
2017-01-17
mainboard/google/snappy: Add PowerResource for ELAN touchscreen
Wisley Chen
2017-01-13
google/pyro: Add ELAN touch screen support
Kevin Chiu
2017-01-03
google/snappy: Update DPTF settings
Wisley Chen
2017-01-03
mainboard/google/reef: Update DPTF parameters EVT1_v0.3
Tim Chen
2016-12-17
google/reef: Use exported GPIOs and ACPI regulator for touchscreen
Furquan Shaikh
2016-12-16
drivers/i2c/generic: Allow mainboards to export reset and enable GPIOs
Furquan Shaikh
2016-12-15
mainboard/google/reef: clear normal MRC cache on recovery retrain
Aaron Durbin
2016-12-15
google/reef: Remove VARIANT_DIR definition
Martin Roth
2016-12-13
mainboard/google/reef: implement phase enforcement pin
Aaron Durbin
2016-12-12
google/pyro: Set PL2 override to 15000mW
Kevin Chiu
2016-12-09
mainboard/google/reef: fill in NHLT ACPI OEM header fields
Aaron Durbin
2016-12-09
mainboard/google/reef: add board SKU'ing support
Aaron Durbin
2016-12-08
mainboard/google/reef: Set PL2 override to 15000mW
Sumeet Pawnikar
2016-12-07
mainboard/google/reef: adjust chromeos.fmd regions
Aaron Durbin
2016-12-02
google/pyro: set i2c bus timings by rise/fall times
Kevin Chiu
2016-12-02
mainboard/google/reef: Add all DMIC endpoints
Sathyanarayana Nujella
2016-12-01
mainboard/google/reef: allow variants to modify nhlt oem revision
Aaron Durbin
2016-12-01
lib/nhlt: add support for setting the oem_revision
Aaron Durbin
2016-11-30
mainboard/google/snappy: Tune i2c frequency to 400 Khz
Wisley Chen
2016-11-30
mainboard/reef: Add RW_VAR_MRC_CACHE
Andrey Petrov
2016-11-29
google/pyro: disable unused devices
Kevin Chiu
2016-11-29
mainboard/google/snappy: Add digitizer device to devicetree
Wisley Chen
2016-11-29
mainboard/google/reef: Set DPTF CPU passive temperature trip point to 95C
Sumeet Pawnikar
2016-11-28
mainboard/google/reef: Set PL1 MAX power limit value to 12W
Tim Chen
2016-11-23
google/pyro: Update DPTF settings
Kevin Chiu
2016-11-20
mainboard/google/reef: Update DPTF parameters provided from thermal team
Tim Chen
2016-11-18
google/chromeec: Add common infrastructure for boot-mode switches
Furquan Shaikh
2016-11-17
google/snappy: Update DPTF settings
Wisley Chen
2016-11-17
mainboard/google/reef: disable unused devices
Jagadish Krishnamoorthy
2016-11-17
mainboard/google/reef: set i2c bus timings by rise/fall times
Aaron Durbin
2016-11-16
mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pin
Sathyanarayana Nujella
2016-11-11
mainboard/google/snappy: Configure PERST pin
Wisley Chen
2016-11-11
google/snappy: update timing of sdmode toggling
Wisley Chen
2016-11-11
mainboard/google/snappy: Set PL1 override to 12000mW
Wisley Chen
2016-11-10
mainboard/google/reef: Add digitizer device to devicetree
Furquan Shaikh
2016-11-10
mainboard/google/reef: Tune digitizer I2C frequency to 400kHz
Furquan Shaikh
2016-11-10
drivers/i2c/wacom: Make the driver more generic
Furquan Shaikh
2016-11-10
mainboard/google/pyro: Set PL1 override to 12000mW
Kevin Chiu
2016-11-10
google/pyro: Tune i2c frequency to 400 Khz
Kevin Chiu
2016-11-10
google/pyro: update timing of sdmode toggling
Kevin Chiu
2016-11-10
mainboard/google/pyro: Configure PERST pin
Kevin Chiu
2016-11-10
mainboard/google/reef: Add support for RECOVERY_MRC_CACHE
Furquan Shaikh
2016-11-09
mainboard/google/reef: use common google smbios mainboard version
Aaron Durbin
2016-11-09
google/pyro: Update WACOM touchscreen ACPI _HID
Janice Li
2016-11-07
mainboard/google/reef: update DMIC related pins configuration
Sathyanarayana Nujella
2016-11-04
reef: tune trackpad i2c frequency to 400kHz
Aaron Durbin
2016-11-04
reef: tune tpm i2c frequency to 400kHz
Aaron Durbin
2016-10-28
mainboard/google/reef: allow variants to override NHLT OEM strings
Aaron Durbin
2016-10-28
mainboard/google/reef: update comment for DMIC config usage
Aaron Durbin
2016-10-27
mainboard/google/reef: drop disabling periodic training for micron
Aaron Durbin
2016-10-27
mainboard/google/reef: clarify memory part number details
Aaron Durbin
2016-10-26
google/reef/variants/pyro: Use WCOM Touchscreen driver
Furquan Shaikh
2016-10-25
mainboard/google/reef: Add PowerResource for ELAN touchscreen
Furquan Shaikh
2016-10-20
mainboard/google/reef: add snappy variant
Wisley Chen
2016-10-18
mainboard/google/reef: Configure PERST pin for reef DVT
Vaibhav Shankar
2016-10-16
mainboard/google/reef: Set PL1 override to 12000mW
Venkateswarlu Vinjamuri
2016-10-10
google/reef: update timing of sdmode toggling
Sathyanarayana Nujella
2016-10-07
google/reef/variants/pyro: Add support for GPIO output polarity
Martin Roth
2016-10-07
x86/acpi_device: Add support for GPIO output polarity
Furquan Shaikh
2016-10-07
mainboard/google/reef: add pyro variant.
Kevin Chiu
[prev]
[next]