summaryrefslogtreecommitdiff
path: root/src/mainboard/google/reef/gpio.h
AgeCommit message (Collapse)Author
2016-07-22google/reef: Update gpio config for audioSathyanarayana Nujella
This changelist updates gpio config for speaker SDMODE pin. It disables speaker by default. Audio kernel is expected to enable this when audio rendering starts. Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8983e7 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15433 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-21mainboard/google/reef: handle eMMC power signal polarity changeAaron Durbin
The EVT board uses an active high power control signal while the previous board used an active low signal. Update the tables to reflect the differences. BUG=chrome-os-partner:55470 Change-Id: I198c0e4e019fcffe2cf748d382351ac965a81077 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15763 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-13mainboard/google/reef: use new gpio interrupt macrosAaron Durbin
Utilize the new interrupt macros in order to specify correct polarity of the gpio interupts. Some of the interrupts were working by catching the opposite edge of the asserted interrupt. BUG=chrome-os-partner:54977 Change-Id: Iee33c0a949be0a11147afad8a10a0caf6590ff7b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15645 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-07-12google/reef: Add GPE routing settingsShaunak Saha
This patch sets the devicetree for gpe0_dw configuration and also configures the GPIO lines for SCI. EC_SCI_GPI is configured to proper value. BUG = chrome-os-partner:53438 TEST = Toggle pch_sci_l from ec console using gpioset command and see that the sci counter increases in /sys/firmware/acpi/interrupt and also 9 in /proc/interrupt Change-Id: If258bece12768edb1e612c982514ce95c756c438 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15556 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-07mainboard/google/reef: apply EVT board changesAaron Durbin
Based on the board revision apply the correct GPIO changes. The only differences are the addition of 2 peripheral wake signals and a dedicated peripheral reset line. BUG=chrome-os-partner:54959,chrome-os-partner:54960,chrome-os-partner:54961 BRANCH=None TEST=Built and tested on reef. Change-Id: I9cac82158e70e0af1b454ec4581c2e4622b95b4b Signed-off-by: Aaron Durbin <adurbin@chromuim.org> Reviewed-on: https://review.coreboot.org/15562 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-07mainboard/google/reef: add memory SKU id supportAaron Durbin
While the proto boards didn't have a memory SKU notion the EVT boards do. Therefore, provide support for selecting the proper memory SKU information based on the memory id straps. This works on EVT boards because the pins used for the strapping weren't used on proto. However, internal pullups need to be enabled so that proto boards read the correct id. BUG=chrome-os-partner:54949 BRANCH=None TEST=Built and used on reef for memory config. Change-Id: I8653260e5d1b9adc83b78ea2770c683b72535e11 Signed-off-by: Aaron Durbin <adurbin@chromuim.org> Reviewed-on: https://review.coreboot.org/15560 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-02google/reef: Add DA7219 support in acpiSathyanarayana Nujella
Add DA7219 support in acpi. DA7219 has advanced accessory detection functionality. Also add DA7219's AAD as a ACPI data node. Change-Id: I979275cb2ab1e593ff1e5d360bea83b843e45032 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15436 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01mainboard/google/reef: Configure DDI0, DDI1 HPD GPIO linesAbhay Kumar
Configure GPIO_199 and GPIO_200 as NF2 to work as HPD. Change-Id: If3aa6b75ed22c221cfbedaecf16035cdd9939387 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/15447 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-29google/reef: set 20K PULLUP on SDCARD DATA/CLK/CMDFreddy Paul
SD card need 20K PULLUP on D0-D3/CLOCK/COMMAND lines. Without this SDCARD will throw data read/write errors. BUG=chrome-os-partner:54676 TEST=Build and boot to OS. Verify SD card is detected and data read/write works well. Change-Id: I90da5b84dc2e488eb38f805322bd7b4dee394e5b Signed-off-by: Freddy Paul <freddy.paul@intel.com> Reviewed-on: https://review.coreboot.org/15345 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-21google/reef: Add ACPI code for trackpadFreddy Paul
This patch enlists ELAN trackpad on I2C4 for reef board. BUG=None TEST=Build and boot to OS. Ensure ELAN trackpad is working with ELAN trackpad driver enabled in kernel. Change-Id: I788600f16dea9fac0e089cb82ccfc38a960157f9 Signed-off-by: Freddy Paul <freddy.paul@intel.com> Reviewed-on: https://review.coreboot.org/15213 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-08mainboard/google/reef: Configure sd card pinsJagadish Krishnamoorthy
Since the sd card cmd, data, cd lines are configured as native mode, allow the native controller to control the termination. Configure SDCARD_CLK_FB which is used for calibrating the timing of the actual clock buffer. BUG==chrome-os-partner:53747 TEST=verify sd card detection Change-Id: I56611826afb4fb32fefa7f1e4ba19ca4f30ba578 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://chromium-review.googlesource.com/348377 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15096 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-05-17mainboard/google/reef: add first pass of full pad configurationAaron Durbin
This is an initial stab of configuring the reef pads. Change-Id: I8d8060745af6fbada268c6c6f3492b985ddf9eb8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14831 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Tested-by: build bot (Jenkins)
2016-05-13mainboard/google: add reef reference boardAaron Durbin
This adds the initial scaffolding for the reef reference board. One big thing missing is the GPIO configuration. Change-Id: I8e2d275df296bb397bb33dbd0c66fc87c82ff10f Signed-off-by: Aaron Durbni <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14798 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-20 08:32:01 +0000