aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/reef/Kconfig
AgeCommit message (Collapse)Author
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09apollolake: Define MAX_CPUS at SoC scopeAngel Pons
The three Intel Apollo Lake boards (apl_rvp, leafhill and minnow3) do not define MAX_CPUS, which would then default to 1. Since this is most likely an oversight, use the same value as other Apollo Lake boards. To ensure this does not happen again, factor out MAX_CPUS to SoC scope. Change-Id: I5ed98a6b592c8010b59eca7ff773ae1ccc4cd7b1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45144 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09apollolake: Limit MAX_CPUS to 4Angel Pons
APL does not support Hyper-Threading, and has at most four CPU cores. Change-Id: Ib2ffadc0c31cdd96bec8eed5364c984acb2e1250 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45143 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02mb/*/Kconfig: Drop redundant 'select DRIVERS_INTEL_WIFI'Elyes HAOUAS
DRIVERS_INTEL_WIFI is already set to yes. Change-Id: I09f628a9c1feb8992b6fe7c7ca93c75243ffc0f1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-02mb/google/reef: Add and use VBTMatt DeVillier
Add VBT file, and override use via Kconfig since all Reef variants use the same VBT file. VBT extracted from firmware in ChromeOS recovery image. Test: built/boot google/reef w/FSP display init Change-Id: I31156ec7371c0443719fdd9ddac6ed4960c83767 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02mb/google/reef: add default non-ChromeOS FMAPMatt DeVillier
Add a FMAP which supports SMMSTORE and non-ChromeOS payloads, since Apollo Lake-based devices like Reef cannot use an automatically-generated FMAP due to strict layout requirements. Change-Id: If570f92f4f81c0e29777c87756fc5e45af549064 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
Kconfig became stricter on what it accepts, so accomodate before updating to a new release. Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-09-30mb: remove test-only HWIDsHung-Te Lin
The CONFIG_GBB_HWID can be generated automatically now so we can remove the test-only HWIDs set in board config files. BUG=b:140067412 TEST=Built few boards (kukui, cheza, octopus) and checked HWID: futility gbb -g coreboot.rom Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
After f5ca922 (Untangle CBFS microcode updates) got merged, all mainboard using intel apollolake, cannonlake, coffeelake, glk, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. BUG=N/A TEST=Build and test on Sarien platform, by default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port 2. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I550a00144cff21420537bb161c64e7a132c5d2de Reviewed-on: https://review.coreboot.org/c/30853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-07-03mb/google/*: Remove selection of DRIVERS_PS2_KEYBOARDFurquan Shaikh
Until now, chromeec was doing keyboard initialization for the boards that have DRIVERS_PS2_KEYBOARD selected. However, coreboot does not leave the keyboard controller in a default reset state. This could result in payloads or OS failing to probe the controller as there could be stale data buffered in the controller during the handoff. Since the boards using chromeec already perform keyboard initialization in payload, there is no need to initialize the keyboard in coreboot too. This change gets rid of DRIVERS_PS2_KEYBOARD selection from all google mainboards using chromeec. BUG=b:110024487 TEST=Keyboard works fine after booting to OS even if user hits keys during BIOS to OS handoff. Change-Id: I1f49b060eb005c0f2b86f9d68d6758954eeb3cf0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27291 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-26mb/google/*: Use newly added Chrome EC boardid functionFurquan Shaikh
Instead of duplicating code across multiple mainboards, use newly added helper function to read boardid from Chrome EC. Change-Id: I1671c0a0b87d0c4c45da5340e8f17a4a798317ca Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-24mb/google/coral: Copy devicetree.cb from baseboardTim Chen
It is a copy from baseboard/devicetree.cb (coreboot.org ToT) BUG=b:64880573 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I5db730c1974a96547fe7fda63689b7c5bfaefc66 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22mainboard/google/coral: Overwrite family code for coral models.Harry Pan
This patch assigns the code of coral family, such that, the 'mosys platform family' returns 'Google_Coral'. BUG=b:64467244, b:64501879 BRANCH=none TEST=Examine 'mosys platform family' w/ new firmware. Change-Id: I1d8f8ca2166a1d80855608cf5b64b0cc7bf3dc93 Signed-off-by: Harry Pan <harry.pan@intel.com> Reviewed-on: https://review.coreboot.org/21136 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-05google/reef: Add coralPatrick Georgi
A new variant copied from reef. Allow override of the SKU. Change-Id: Ibe160e75aa23623812f0fb9121d1d8226afc00d8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20020 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-08mb/google/reef: enable SAR and DSARWei-Ning Huang
Enable SAR and DSAR for reef. BUG=b:37612675 TEST=`emerge-reef coreboot` Change-Id: Ie0a59f8fcc9fb104328ee6d276ecab4193ec8eb8 Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Reviewed-on: https://review.coreboot.org/19579 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-04-24mainboard/google/reef: Remove DRIVER_TPM_I2C_IRQDaniel Kurtz
DRIVER_TPM_I2C_IRQ has been removed. TPM_TIS_ACPI_INTERRUPT now specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: If66a2a1d461a411e112589c84a434066d48b9399 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19410 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24mainboard/google/reef: Add TPM_TIS_ACPI_INTERRUPTDaniel Kurtz
TPM_TIS_ACPI_INTERRUPT specifies the TPM2 ACPI interrupt used by intel's tis_plat_irq_status() routine. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM". Change-Id: Ic69add8a3ce35be64fb37db4ed40163f6144fc9c Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19408 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-24Kconfig: provide MAINBOARD_HAS_TPM_CR50 optionAaron Durbin
The CR50 TPM can do both SPI and I2C communication. However, there's situations where policy needs to be applied for CR50 generically regardless of the I/O transport. Therefore add MAINBOARD_HAS_TPM_CR50 to encompass that. Additionally, once the mainboard has selected CR50 TPM automatically select MAINBOARD_HAS_TPM2 since CR50 TPM is TPM 2.0. Change-Id: I878f9b9dc99cfb0252d6fef7fc020fa3d391fcec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19370 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22mainboard/google/reef: add nasher variantYH Lin
Create the initial Nasher variant which refers to the Reef. Nasher is APL board that derives from reference board Reef. BRANCH=master BUG=b:36389286 TEST=Build (as initial setup) Signed-off-by: YH Lin <yueherngl@chromium.org> Change-Id: I7962aa8246890149988c7f02dcd90d820df7b901 Reviewed-on: https://review.coreboot.org/18928 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-10google/sand: Add devicetree.cb file for sandKatherine Hsieh
It is a copy from baseboard/devicetree.cb (coreboot.org ToT) BUG=b:35775065 BRANCH=reef TEST=emerge-sand coreboot Change-Id: I5ba86e54ccfbf5af7bf0e9ad8fe7bf22020e48ee Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/18703 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-09mainboard/google/reef: increase pre cbmem console size for Chrome OSAaron Durbin
verstage can be pretty chatty so bump the pre cbmem console size when building for Chrome OS so that all messages can be observed. BUG=b:35775104 BRANCH=reef TEST=Booted and noted no cutoff of console when sec data being saved. Change-Id: I0ce2976572dedf976f051c74a3014d282c3c5f4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18679 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-20drivers/i2c: Use I2C HID driver for wacom devicesFurquan Shaikh
Wacom I2C driver does the same thing as I2C HID driver, other than defining macros for Wacom HID. Instead of maintaining two separate drivers providing the same functionality, update all wacom devices to use generic I2C HID driver. BUG=None BRANCH=None TEST=Verified that ACPI nodes for wacom devices are unchanged. Change-Id: Ibb3226d1f3934f5c3c5d98b939756775d11b792c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18401 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20mainboard/{google,intel}: Change config option selectionFurquan Shaikh
Change config option selection from "config xyz default y" to "select xyz" if the config option has no dependencies. BUG=None BRANCH=None TEST=Verified that config option selection remains unchanged. Change-Id: I259ae40623b7f4d5589e2caa0988419ba4fefda4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18400 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20mainboard/google/reef: Remove config DRIVERS_GENERIC_GPIO_REGULATORFurquan Shaikh
Since we are not using gpio regulators on reef anymore, remove the selection from Kconfig as well. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Iae7d88dec3ac476d65b292f97a6ba3add71ce07a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18399 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-15mainboard/google/reef: add sand variantYH Lin
Create the initial Sand variant which refers to the Reef. Sand is APL board that derives from reference board Reef. BRANCH=master BUG=chrome-os-partner:62200 TEST=Build (as initial setup) Signed-off-by: YH Lin <yueherngl@chromium.org> Change-Id: Iba8c5653b6176676c759d2b48063f0c0c6cde625 Reviewed-on: https://review.coreboot.org/18324 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-31mainboard/google/reef: remove NHLT DMIC 1ch and 2ch configurationSathyanarayana Nujella
Apollolake boards should use DMIC-4ch configuration in Kernel side and use CaptureChannelMap in userspace to distinguish boards with different number of DMIC's. So, NHLT DMIC 1-ch & 2-ch endpoint configuration will not be required and hence removed. BUG=chrome-os-partner:60827 TEST=Verify internal mic capture TEST='arecord -Dhw:0,3 dmic_4ch.wav -f S16_LE -r 48000 -c 4 -d 10' works Change-Id: Ibe81290906c9e379ae49e437648ee9cd6f123ff8 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/18252 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-20google/snappy: Add weida touchscreen supportWisley Chen
Add weida touchscreen as 2nd touchscreen source BUG=chrome-os-partner:61865 BRANCH=reef TEST=emerge-snappy coreboot, and verified that touchscreen works on snappy. Change-Id: If76312a62e97da9d5de18ad895e90ee6b0f0c6ae Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18166 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-17google/reef: Use exported GPIOs and ACPI regulator for touchscreenFurquan Shaikh
ELAN touchscreen device expects firmware to export GPIOs and ACPI regulators for managing power to the device. Thus, provide the required ACPI elements for OS driver to properly manage this device. BUG=chrome-os-partner:60194 BRANCH=None TEST=Verified that touchscreen works properly on boot-up and after suspend/resume. Change-Id: I298ca5de9c0ae302309d87e3dffb65f9be1e882e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17799 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-15mainboard/google/reef: clear normal MRC cache on recovery retrainAaron Durbin
For Chrome OS the normal MRC cache should be cleared when a hardware retrain recovery request is observed. The reason is that since there are 2 different MRC cache slots there needs to be a mechanism which allows an end user make a system bootable again if the MRC settings happen to not allow the system to boot any longer. Therefore, one just needs to enter recovery with the hardware retrain flag and the system normal MRC cache slot will be invalidated. BUG=chrome-os-partner:60592 BRANCH=reef Change-Id: I6ad32ed0dd217d66404b77467a88689a06044544 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17871 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
Instead of defining the same functions for reading/clearing boot-mode switches from EC in every mainboard, add a common infrastructure to enable common functions for handling boot-mode switches if GOOGLE_CHROMEEC is being used. Only boards that were not moved to this new infrastructure are those that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific mechanism for reading boot-mode switches. BUG=None BRANCH=None TEST=abuild compiles all boards successfully with and without ChromeOS option. Change-Id: I267aadea9e616464563df04b51a668b877f0d578 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17449 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-11-16mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pinSathyanarayana Nujella
Reef board uses GPIO_17 as DMIC config pin. This pin distinguishes board with Quad DMIC's or Mono DMIC. This patch adds necessary DMIC endpoints to support either of those configurations. CQ-DEPEND=CL:*304339,CL:409774 BUG=chrome-os-partner:56918 BRANCH=none TEST=Verify Mono and Quad Channel DMIC record Change-Id: I5b2825b5f39f8962985a129f8ec65265fb18f0b2 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17158 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
Wacom I2C driver can be used by devices other than touchscreen. e.g. digitizer. So there is no need to name the driver with touchscreen specific attributes. Only a separate descriptor name is required that needs to be set by mainboard correctly. BUG=chrome-os-partner:56246 BRANCH=None TEST=Compiles successfully. Change-Id: I0d32a4adae477373b3f4c5f3abbe188860701194 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17341 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10mainboard/google/reef: Add support for RECOVERY_MRC_CACHEFurquan Shaikh
1. Add RECOVERY_MRC_CACHE region to reef FMAP. 2. Implement helper function for getting event for recovery mode with memory retraining. 3. Select HAS_RECOVERY_MRC_CACHE. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified recovery mode behavior with and without memory training request on reef. Change-Id: I91abc9f8122f1aa3980c6372ab557e56a7a92730 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17243 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-09mainboard/google/reef: use common google smbios mainboard versionAaron Durbin
BUG=chromium:663243 Change-Id: Ic78a6aac11a8e842911245c59e8ced7ed2c4e27a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17291 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-26google/reef/variants/pyro: Use WCOM Touchscreen driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Ibd3ef8cebcf99ee2186dfed98b04373dd17e798e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17093 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-10-20mainboard/google/reef: add snappy variantWisley Chen
Create the initial Snappy variant which refers to the Reef device. Snappy, an Apollolake-platform, is deviated from reference board Reef. BRANCH=master BUG=None TEST=Built & booted Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I6f32c0b1a154edbd8c4822acdbdbdbeb4a0098e6 Reviewed-on: https://review.coreboot.org/17043 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-07mainboard/google/reef: add pyro variant.Kevin Chiu
Create the initial Pyro variant which refers to the Reef. Pyro is APL Chrome board that deviate from reference board Reef. BRANCH=master BUG=None TEST=Build Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Change-Id: I9beed1f6895e8891d3d51b563edfe172f566718b Reviewed-on: https://review.coreboot.org/16855 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-01mainboard/google/reef: unconditionally set MAINBOARD_FAMILYAaron Durbin
For all mainboard variants use the "Google_Reef" family by default which is populated in SMBIOS tables. A variant can provide their own value if needed, but "Google_Reef" can reside as the family without having to add conditions for each variant when MAINBOARD_FAMILY have to be overridden. BUG=chrome-os-partner:56677 Change-Id: Ic214eae1e6473b32f4cb442c09c34355357e1257 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16813 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-09-30google/reef: Fix default values in KconfigMartin Roth
These default values weren't being set with the default keyword so were ending up with different values. from the default generated config file before this change: CONFIG_DRIVER_TPM_I2C_BUS=0x9 CONFIG_DRIVER_TPM_I2C_ADDR=0x2 CONFIG_DRIVER_TPM_I2C_IRQ=-1 Change-Id: I19514d0c9b2a9b7e479f003a4d3384e073f4d531 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16828 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-21mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
Enable the cr50 TPM and interrupt as GPE0_DW1_28 for use during verstage. The interrupt is left in APIC mode as the GPE is still latched when the GPIO is pulled low. BUG=chrome-os-partner:53336 Change-Id: Ib0247653bdcbaccb645cd16b81d7ec3c38f669af Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16673 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-19Revert "mainboard/google/reef: Enable cr50 TPM interrupt"Duncan Laurie
This reverts commit 24de342438208d9b843e87627f15b9a272285b0f.
2016-09-19mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
Enable the cr50 TPM and interrupt as GPE0_DW1_28 for use during verstage. The interrupt is left in APIC mode as the GPE is still latched when the GPIO is pulled low. BUG=chrome-os-partner:53336 Change-Id: I28ade5ee3bf08fa17d8cabf16287319480f03921 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-08mainboard/google/reef: move devicetree to baseboardAaron Durbin
Move the current devicetree.cb to be under variants/baseboard. New variants can provide their own devicetree as needed. BUG=chrome-os-partner:56677 Change-Id: Ib109ca4be883884b318264500d14aa8d40e3072a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16510 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-09-06google/reef: Enable I2C TPMDuncan Laurie
Enable the I2C based TPM on the reef board at bus 2 and address 0x50. This makes vboot functional without needing MOCK_TPM and results in the following in the SSDT: Device (TPMI) { Name (_HID, "GOOG0005") // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Name (_DDN, "I2C TPM") // _DDN: DOS Device Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { I2cSerialBus (0x0050, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer) Interrupt (ResourceConsumer, Edge, ActiveLow, Exclusive) { 0x00000039 } }) } Change-Id: Ia9775caabeac3e6a3bd72de38f9611b4cea7cea4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16398 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-04mainboard/google/reef: provide baseboard and variant conceptsAaron Durbin
To further the ability of multiple variant boards to share code provide a place to land the split up changes. This patch provides the tooling using a new Kconfig value, VARIANT_DIR, as well as the Make plumbing. The directory layout with a single variant, reef (which is also the baseboard), looks like this: variants/baseboard - code variants/baseboard/include/baseboard - headers variants/reef - code variants/reef/include/variant - headers New boards would then add themselves under their board name within the 'variants' directory. No split has been done with providing different logic yet. This is purely a organizational change. BUG=chrome-os-partner:56677 Change-Id: Ib73a3c8a3729546257623171ef6d8fa7a9f16514 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16418 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-04mainboard/google/reef: prepare sharing directory for variantsAaron Durbin
Instead of completely duplicating the a reference board's directory when doing a variant or follower device start providing a means to share code within a single directory. This change just starts the process from the Kconfig side, but subsequent patches will follow which disentangles the board specific pieces from and common logic. BUG=chrome-os-partner:56677 Change-Id: I96628920d78012e488ec008e35daac9c1be0cf79 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16417 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-31mainboard/*/Kconfig: Set GBB_HWID where missingPatrick Georgi
Provide GBB's hardware ID (used on Chrome OS devices) because it will be dropped from depthcharge. BRANCH=none BUG=none TEST=none Change-Id: I4851c1bdb21863983277d3283105c88b85a6166b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 705251d2899bc006e21ff3e34a3fc3eba2dd4d00 Original-Change-Id: I7488533b83b8119f8c85cbf2c2eeddabb8e9487d Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/372579 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16363 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-18Kconfig: rename BOOT_MEDIA_SPI_BUS to BOOT_DEVICE_SPI_FLASH_BUSAaron Durbin
Provide a default value of 0 in drivers/spi as there weren't default values aside from specific mainboards and arch/x86. Remove any default 0 values while noting to keep the option's default to 0. BUG=chrome-os-partner:56151 Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16192 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-25apollolake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15821 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-24google/reef: Enable PS/2 keyboard driver by defaultDuncan Laurie
This device has a built-in keyboard that should be enabled by default or it will not work in firmware. This was tested to ensure that TAB (display info) and Ctrl+D (enter developer mode) are functional at the Chrome OS recovery screen. BUG=chrome-os-partner:55549 Change-Id: I60156f1fc001b88deac69e03e02e9d8277fbc38d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15782 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-19mainboard/google/reef: explicitly set shipping Chrome OS optionsAaron Durbin
The Chrome OS options that will be shipped on this platform were being set in the chromium repo with an external config file. Set the options in the mainboard Kconfig file so there's no discrepancy as to what will be used. Change-Id: I05f0d1245611c16f54273728519a08e6edff3429 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15733 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-08mainboard/google/reef: Use device driver for DA7219 configurationDuncan Laurie
Use the device driver for DA7219 device configuration in the SSDT and remove the static copy in the DSDT. Tested on reef to ensure that the generated SSDT contents are equivalent to the current DSDT contents. Change-Id: I288eb05d0cb3f5310c4dca4aa1eab5a029f216af Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15539 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-08google/reef: Add Maxim98357a supportHarsha Priya
Adds Maxim98357a support for reef using the generic driver in drivers/generic/max98357 Change-Id: I333d4e810e42309ac76dd90c19f05cf3e3a517e0 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15435 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-02google/reef: ACPI: Move touchpad to SSDT and remove TPMDuncan Laurie
Instantiate the touchpad using the drivers/i2c/generic device driver to generate the ACPI object in the SSDT. There is not currently a separate wake pin for this device, this will be added in EVT hardware. This was tested on the reef board by ensuring that the touchpad device continues to work in the OS. Also remove the LPC TPM from the DSDT as it is not present. Change-Id: I3151a28f628e66f63033398d6fab9fd8f5dfc37b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15481 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01mainboard/google/reef: Use common NHLTSaurabh Satija
Add ACPI NHLT table generation that the current hardware supports. Reef supports two audio codecs, Dialog 7219 for headsets and Maxim 98357 for speakers. Change-Id: Ie39947960c86b8f65140834e31f9ed9f1b578485 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/15440 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-22mainboard: Remove use of IFD_BIOS_START/IFD_BIOS_ENDFurquan Shaikh
BUG=chrome-os-partner:54563 Change-Id: If07710333cbb84ce70d6d4fa40602a74c898c08a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15293 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-16google/reef: Update flash size to 16MiBFurquan Shaikh
Use entire 16MiB flash size on reef. Adjust SIGN_CSE region accordingly. BUG=chrome-os-partner:54390 Change-Id: I94de509bdb2aa94625814123bf4d9758bfa37fc9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15191 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-02google/reef: Select UART_FOR_CONSOLE for reefFurquan Shaikh
Change-Id: I714af8ab552dc1923a1b64e0c502d6c7b96dd444 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-27mainboard/google/reef: increase BIOS region sizeAaron Durbin
An updated descriptor expands the BIOS region while descreasing the 'device expansion region' utilized by the CSE. Update the end region marker to reflect this new size as well as the chromeos.fmd file which needs to be adjusted for logical boot parition 2 requirement which resides halfway through the BIOS region. The GBB was moved and shunk to accommodate the change. Change-Id: I7baa5282d7c608af648b5773c4dfa123060a6e45 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14974 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-05-13mainboard/google: add reef reference boardAaron Durbin
This adds the initial scaffolding for the reef reference board. One big thing missing is the GPIO configuration. Change-Id: I8e2d275df296bb397bb33dbd0c66fc87c82ff10f Signed-off-by: Aaron Durbni <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14798 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-10 14:10:06 +0000