summaryrefslogtreecommitdiff
path: root/src/mainboard/google/rambi
AgeCommit message (Expand)Author
2015-06-30Add Kconfig flag to specify if there's a lid switchPatrick Georgi
2015-06-30Expose get_lid_switch() in romstagePatrick Georgi
2015-06-02cbfs: new API and better program loadingAaron Durbin
2015-05-27Move TPM code out of chromeosVladimir Serbinenko
2015-05-23baytrail: Switch to per-device ACPIVladimir Serbinenko
2015-05-21Remove address from GPLv2 headersPatrick Georgi
2015-05-21Remove unused functionsPatrick Georgi
2015-05-19Move smi trap sample to documentation, don't keep it in every mobo.Vladimir Serbinenko
2015-04-28boards: remove VBOOT_(REFCODE|RAMSTAGE|ROMSTAGE)_INDEXAaron Durbin
2015-04-22mainboards: Add CHROMEOS_VBNV_* where appropriatePatrick Georgi
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
2015-04-07baytrail: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-01mainboards: fix spd generationAaron Durbin
2015-03-30Update hex values to CBFS binary name types in MakefilesMartin Roth
2015-03-18bootstate: use structure pointers for scheduling callbacksAaron Durbin
2015-02-16mainboard/cmos: Delete obsolete commented parametersTimothy Pearson
2015-01-16rambi: configure USBPHY_COMPBG by the setting in devicetree.cbKane Chen
2014-12-31rambi: Add _PRW for LID0 ACPI DeviceShawn Nematbakhsh
2014-12-31rambi: Unconditionally clear the EC recovery requestSheng-Liang Song
2014-12-30Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitchKein Yuan
2014-12-17rambi: align gpu pipea settings with the VBIOSAaron Durbin
2014-11-09src: Too many terminators ';;' at end of stmts, stop SkynetEdward O'Callaghan
2014-10-28rambi: switch MCLK from 19.2Mhz to 25MhzKein Yuan
2014-10-28baytrail: Remove unused devicetree fieldsShawn Nematbakhsh
2014-10-28rambi: always show dev/rec screens on eDP connected panelKein Yuan
2014-10-22baytrail/rambi: S3 support and other updatesKein Yuan
2014-10-17Add board_info for all Google/Intel boards mitting the fileStefan Reinauer
2014-09-19baytrail/rambi: spi, charger, and audio updatesAaron Durbin
2014-09-18rambi/baytrail: ACPI, GPIO, audio, misc updatesShawn Nematbakhsh
2014-08-22Remove dead video.aslVladimir Serbinenko
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-17mainboard,ASL: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-07-08mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
2014-06-21intel boards: Use acpi_is_wakeup_s3()Kyösti Mälkki
2014-06-18ACPI: Remove CBMEM TOC from GNVSKyösti Mälkki
2014-05-15rambi: Add ACPI devices and interrupts for codec and ALSDuncan Laurie
2014-05-15rambi: Add ACPI table support for I2C devicesDuncan Laurie
2014-05-15rambi: disable SERIRQ native functionalityAaron Durbin
2014-05-13rambi: dptf: Set critical thresholdsDuncan Laurie
2014-05-13rambi: Update the DPTF configurationDuncan Laurie
2014-05-13rambi: Move KBD_IRQ pin for Rambi 2.0 boardShawn Nematbakhsh
2014-05-12Rambi: Enable 32k SUSCLK signalKyösti Mälkki
2014-05-12rambi: Make eMMC CLK pull-down and change pull strengths to 20KShawn Nematbakhsh
2014-05-12rambi: specify reference code index in vboot areaAaron Durbin
2014-05-12rambi: Disable HSUART2 and SPI interfacesDuncan Laurie
2014-05-12rambi: Enable SCC devices in ACPI modeDuncan Laurie
2014-05-09rambi: Enable DPTFDuncan Laurie
2014-05-09rambi: Set panel power timingsDuncan Laurie
2014-05-09rambi: change SD card pulls to 20KAaron Durbin
2014-05-09rambi: limit SD card controller to 2.0 specAaron Durbin
2014-05-09rambi: export SPI write-protect GPIO correctlyAaron Durbin
2014-05-08ChromeOS boards: Always build code for bootmode strapsKyösti Mälkki
2014-05-08Declare get_write_protect_state() without ChromeOSKyösti Mälkki
2014-05-08rambi: Make ec_in_rw a legacy GPIOShawn Nematbakhsh
2014-05-08rambi: Change eMMC pin PUs to 2KShawn Nematbakhsh
2014-05-08rambi: configure SD card signalsAaron Durbin
2014-05-08rambi: configure the LPE audio codec clockAaron Durbin
2014-05-07rambi: Remove outdated commentPatrick Georgi
2014-05-07rambi: handle single channel configsAaron Durbin
2014-05-07rambi: use SERIRQ pad as keyboard irq in gpio modeAaron Durbin
2014-05-07rambi: make ramids non-legacy gpio inputsAaron Durbin
2014-05-07rambi: distribute IRQs away from PIRQA on pci devicesAaron Durbin
2014-05-07rambi: fixup settings so trackpad can be found in kernelAaron Durbin
2014-05-07rambi: Add DIRQs for trackpad and touchscreenShawn Nematbakhsh
2014-05-06rambi: disable HDA deviceAaron Durbin
2014-05-06rambi: enable SCI and SMI gpiosAaron Durbin
2014-05-06rambi: mainboard EC - SCI and SMI fixesAaron Durbin
2014-05-06rambi: include the EC devices normally on superioAaron Durbin
2014-05-06rambi: update EC supportAaron Durbin
2014-05-06baytrail: configure acpi SCI irqAaron Durbin
2014-05-06rambi: mirror bayleybay's eMMC gpio setupAaron Durbin
2014-05-06rambi: Fix eDP panel functionalityDuncan Laurie
2014-05-05baytrail: fix up FADTAaron Durbin
2014-05-05baytrail: interrupt routing supportAaron Durbin
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
2014-05-01ChromeOS: Use common fill_lb_gpio()Kyösti Mälkki
2014-05-01ChromeOS: Remove oprom_is_loadedKyösti Mälkki
2014-04-30baytrail: Clean up NVS regionDuncan Laurie
2014-04-30baytrail: Add reserved MMIO regions to ACPIDuncan Laurie
2014-04-30baytrail: Fix XHCI problems and re-enableDuncan Laurie
2014-03-28mainboard/*/*/ec.c: Do not include `chromeos/chromeos.h`Paul Menzel
2014-03-11rambi: Enable USB boot with EHCI controllerDuncan Laurie
2014-02-27baytrail: fix uninitialized acpi structuresAaron Durbin
2014-02-27rambi: Enable internal keyboardDuncan Laurie
2014-02-27rambi: Enable SATA portShawn Nematbakhsh
2014-02-27rambi: add all on-board devicesAaron Durbin
2014-02-24rambi: add chromeos EC supportAaron Durbin
2014-02-17rambi: Set VBOOT_RAMSTAGE_INDEX to point to ramstage imageShawn Nematbakhsh
2014-02-16rambi: add BSP lapic deviceAaron Durbin
2014-02-16rambi: disable internal pullups on ram_id[2:0]Aaron Durbin
2014-02-14google/rambi: Do not select CHROMEOS in KconfigAlexandru Gagniuc
2014-02-12google boards: Do not hardcode location of spd.binAlexandru Gagniuc
2014-02-11rambi: Add platform GPIO configuration tablesShawn Nematbakhsh
2014-02-11rambi: Add ncore GPIO config tablesShawn Nematbakhsh
2014-02-11rambi: add per-sku SPD supportAaron Durbin
2014-02-06MTRR: Mark all prefetchable resources as WRCOMB.Vladimir Serbinenko
2014-02-05mainboard/google: add initial rambi mainboard supportAaron Durbin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 00:57:53 +0000