summaryrefslogtreecommitdiff
path: root/src/mainboard/google/rambi/mainboard.c
AgeCommit message (Collapse)Author
2017-02-01Add Baytrail ChromeOS devices using variant schemeMatt DeVillier
Add new ChromeOS devices banjo, candy, clapper, glimmer, gnawty, heli, kip, orco, quawks, squawks, sumo, swanky, and winky using their common reference board (rambi) as a base. Chromium sources used: firmware-banjo-5216.334.B 32ec493 [chromeos: vboot_loader: Set...] firmware-candy-5216.310.B 519ff11 [baytrail: Preserve VbNv around...] firmware-clapper-5216.199.B 80d55e3 [baytrail: add code for...] firmware-glimmer-5216.198.B fae0770 [baytrail: add code for...] firmware-gnawty-5216.239.B 952adb7 [Gnawty/Olay: Add 2nd source...] firmware-heli-5216.392.B f1f3604 [helis: Lock ME / TXE section...] firmware-kip-5216.227.B db3c5d9 [kip: update spd for for MT41K256M16*] firmware-orco-5216.362.B 76f1651 [Orco: Adjust rx delay for norm.] firmware-quawks-5216.204.B edb60c9 [Quawks: Update SPD data] firmware-squawks-5216.152.B c6573dc [Squawks: Update SPD data] firmware-sumo-5216.382.B c62b6f23 [Ninja, Sumo: Add SPD source...] firmware-swanky-5216.238.B 233b2a7 [Swanky: update SPD table] firmware-winky-5216.265.B ce91ffc [Add to support HT Micron...] The same basic cleanup/changes are made here as with the initial BYT variant commit: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) - Micron 2GB SPD file for kip with updated values renamed to distinguish from same file used by other boards Change-Id: Ic66f9b539afb5aff32c4c1a8563f6612f5a2927c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18164 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-17Combine Baytrail ChromeOS devices using variant schemeMatt DeVillier
Combine existing boards google/enguarde and google/ninja using their common reference board google/rambi as a baseboard. Variants contain board specific data: - DPTF ACPI components - I2C ACPI devices - RAM config / SPD data - devicetree config - GPIOs - board-specific HW components (e.g., LAN) Additionally, some minor cleanup/changes were made: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) The existing enguarde and ninja boards are removed. Variant setup modeled after google/auron Change-Id: Iae7855af9a224fd4cb948b854494e39b545ad449 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18129 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-30chromeos mainboards: remove chromeos.aslAaron Durbin
Use the ACPI generator for creating the Chrome OS gpio package. Each mainboard has its own list of Chrome OS gpios that are fed into a helper to generate the ACPI external OIPG package. Additionally, the common chromeos.asl is now conditionally included based on CONFIG_CHROMEOS. Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-07baytrail: Change all SoC headers to <soc/headername.h> systemJulius Werner
This patch aligns baytrail to the new SoC header include scheme. BUG=None TEST=Tested with whole series. Compiled Rambi. Change-Id: I0f0a894f6f33449756582eefa0b50bae545220db Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1216a86538517c03a7e5bca547d08ff3dbcaa083 Original-Change-Id: If5d2a609354b3d773aa3d482e682ab97422fd9d5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/222026 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9363 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-18bootstate: use structure pointers for scheduling callbacksAaron Durbin
The GCC 4.9.2 update showed that the boot_state_init_entry structures were being padded and assumed to be aligned in to an increased size. The bootstate scheduler for static entries, boot_state_schedule_static_entries(), was then calculating the wrong values within the array. To fix this just use a pointer to the boot_state_init_entry structure that needs to be scheduled. In addition to the previous issue noted above, the .bs_init section was sitting in the read only portion of the image while the fields within it need to be writable. Also, the boot_state_schedule_static_entries() was using symbol comparison to terminate a loop which in C can lead the compiler to always evaluate the loop at least once since the language spec indicates no 2 symbols can be the same value. Change-Id: I6dc5331c2979d508dde3cd5c3332903d40d8048b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8699 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-30Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitchKein Yuan
To avoid LCD_VCC glitch on cold reset, set SOC_DISP_ON as GPIO output high. After gfx initialize is done, set it to native function 2. BUG=chrome-os-partner:25159 BRANCH=firmware-rambi-5216.B TEST=Tested on Rambi and squawks, no LCD_VCC glitch anymore. Original-Change-Id: If16af498e910a8da1d77a9a66456eb767286a61a Original-Change-Id: Icf62588fa0338f89fafb3fe9246c26f16bcdaa60 Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197985 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Original-Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 6f7d621678f22133c9825565fedc77d19198b08c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibaf547b8d1c27811a1bec9fa3254d559c505a361 Reviewed-on: http://review.coreboot.org/7893 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-10-28rambi: always show dev/rec screens on eDP connected panelKein Yuan
bit: 7 6 5 4 3 2 1 0 LFP2 EFP2 EFP3 CRT2 LFP EFP TV CRT so int 15 0x5f35 need to return 0x8(LFP/eDP) instead of 0x2(TV). BUG=chrome-os-partner:26365 BUG=chrome-os-partner:27505 BRANCH=rambi TEST=Booted with and without HDMI connected monitor. DEV screen always showed on eDP panel on Rambi. Change-Id: I8f876e78383424f517689eb25e9229a27739957b Original-Change-Id: I77edbeb3c86549f90302b4296b5a2f50313ca675 Signed-off-by: Kein Yuan <kein.yuan@intle.com> Reviewed-on: https://chromium-review.googlesource.com/193303 Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit dd375462147f182331f336ba826108e58b4e0a47) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7216 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-22baytrail/rambi: S3 support and other updatesKein Yuan
baytrail: Change all GPIO related pull resistors from 10K to 20K Reviewed-on: https://chromium-review.googlesource.com/187570 (cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e) baytrail: workaround kernel using serial console on resume Reviewed-on: https://chromium-review.googlesource.com/188011 (cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469) baytrail: allow dirty cache line evictions for SMRAM to stick Reviewed-on: https://chromium-review.googlesource.com/188015 (cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca) baytrail: Optionally pull up TDO and TMS to avoid power loss in S3. Reviewed-on: https://chromium-review.googlesource.com/188260 (cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6) rambi: always load option rom Reviewed-on: https://chromium-review.googlesource.com/188721 (cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9) baytrail: use new chromeos ram oops API Reviewed-on: https://chromium-review.googlesource.com/186394 (cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594) rambi: always show dev/rec screens on eDP connected panel Reviewed-on: https://chromium-review.googlesource.com/188731 (cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95) baytrail: stop e820 reserving default SMM region Reviewed-on: https://chromium-review.googlesource.com/189084 (cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24) baytrai: update MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/189196 (cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970) rambi: Put LPE device into ACPI mode Reviewed-on: https://chromium-review.googlesource.com/189371 (cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413) baytrail: DPTF: Enable mainboard-specific PPCC Reviewed-on: https://chromium-review.googlesource.com/189576 (cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612) baytrail: Add config option for PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189994 (cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5) rambi: Enable PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189995 (cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6) Squashed 13 commits for baytrail/rambi. Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6957 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-09-19baytrail/rambi: spi, charger, and audio updatesAaron Durbin
baytrail: combine SPI configuration in romstage Reviewed-on: https://chromium-review.googlesource.com/185140 (cherry picked from commit 4e7f0e8ae1138e478ae7106d54719cf05e13b402) baytrail: lock down registers before handoff Reviewed-on: https://chromium-review.googlesource.com/185200 (cherry picked from commit 82cce4d2b46ccc554b71efa179b5d95756e2ad5e) baytrail: invoke SMM finalization on handoff Reviewed-on: https://chromium-review.googlesource.com/185201 (cherry picked from commit 1b50affb1fdda52a5986c9429713930ed517a86a) rambi: don't invoke SMM finalization Reviewed-on: https://chromium-review.googlesource.com/185202 (cherry picked from commit 6eff475dae7f4536eb846ccf6d51fce262b8ffef) rambi: remove handling of APM_CNT_FINALIZE Reviewed-on: https://chromium-review.googlesource.com/185203 (cherry picked from commit 9fc310d7e2730466cc7fcc84999502a2d4d08bab) baytrail: don't increment boot count on S3 resume Reviewed-on: https://chromium-review.googlesource.com/185381 (cherry picked from commit 940a0fa4df1ce335229eb6f80143b93a84ba358c) rambi: enable HDA device Reviewed-on: https://chromium-review.googlesource.com/184574 (cherry picked from commit 334f2a5c7c6540e744b6aaf7e1da0b55e1368196) baytrail: lock down spi controller according to mainboard Reviewed-on: https://chromium-review.googlesource.com/185631 (cherry picked from commit 696ece68cb6d522c248e800f168e675e4b4a7317) rambi: implement mainboard_get_spi_config() to lock dow spi controller Reviewed-on: https://chromium-review.googlesource.com/185632 (cherry picked from commit 1d9ba15858fd421a4fe5a47f7171273128e89524) baytrail: introduce ssus_disable_internal_pull() Reviewed-on: https://chromium-review.googlesource.com/185740 (cherry picked from commit 9d6056dd70b27183dab6a4656f4f9612ae870a4d) rambi: fix write-protect gpio reading at romstage Reviewed-on: https://chromium-review.googlesource.com/185741 (cherry picked from commit c64627689b1afec59be6fdab323d5492046f0bc7) baytrail: DPTF: implement charger current limit Reviewed-on: https://chromium-review.googlesource.com/185759 (cherry picked from commit 287e8936613a7a83281ff692b20383dacf7fcaf6) rambi: Enable charger participant and define states Reviewed-on: https://chromium-review.googlesource.com/185760 (cherry picked from commit 2f62a11927ecf10cb2c76a9f5d368d4050404137) baytrail: increase command wait timeout Reviewed-on: https://chromium-review.googlesource.com/185874 (cherry picked from commit 962a79ef72169b5d52fc746d1889d3b652fd9bcc) baytrail: make caching MRC data more robust Reviewed-on: https://chromium-review.googlesource.com/185875 (cherry picked from commit b5e10ad47b9e4f330caaee4faf69702f24d6bdd8) baytrail: upgrade MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/186391 (cherry picked from commit 8c1a62f1f4261d4f38aacbbb353c9d6218ec2885) rambi: instruct MRC to use weaker memory ODT settings Reviewed-on: https://chromium-review.googlesource.com/186420 (cherry picked from commit b9329126ca08d20ce1d8c5db0fcabd39140c7292) rambi: Move touch wakeup resource GPIO to separate device Reviewed-on: https://chromium-review.googlesource.com/186932 (cherry picked from commit ba44e2e04f9469c629cb61a911c8cd339f52b0ef) baytrail: Set some MSRs related to turbo power Reviewed-on: https://chromium-review.googlesource.com/186933 (cherry picked from commit 76b25df5a31914ae58d47d17af448216011e425c) baytrail: change power consumption number for ACPI_C3/C6FS. Reviewed-on: https://chromium-review.googlesource.com/186934 (cherry picked from commit 5192e2464fbb88ea6fc117070240c9733e34f065) baytrail: Fix use of ConcatenateResTemplate() in ACPI LPE device Reviewed-on: https://chromium-review.googlesource.com/186928 (cherry picked from commit 8d1ab5de1d43b0790d140f6d0e36a990a5049ece) baytrail: Disable P-state HW coordination on 4-core SKU Reviewed-on: https://chromium-review.googlesource.com/187575 (cherry picked from commit c19c0f1d7cb3cb2635766c186ba9598933424a78) baytrail: DPTF: Enable mainboard-specific _PDL Reviewed-on: https://chromium-review.googlesource.com/187576 (cherry picked from commit 5412ac5c07bee22017a0ee6d1e2433917b98ea87) rambi: Apply DPTF tuning parameters Reviewed-on: https://chromium-review.googlesource.com/187577 (cherry picked from commit 932a5a3803ceaf430ad2934b371ac0886c25efca) rambi : change lpe_codec_clk_freq to 19.2 Reviewed-on: https://chromium-review.googlesource.com/187594 (cherry picked from commit f64cb1ae77076ad5ec994670f4a83dc561ea80c4) Squashed 25 commits for baytrail/rambi. Change-Id: Ibe628ac974d117a09361f7f3131a488911ddd27d Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2014-07-08mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I05d6d22664155ac8478e665733f816776e277c22 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6200 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-07rambi: Add DIRQs for trackpad and touchscreenShawn Nematbakhsh
Also add the relevant info about these pins to the ASL tables + add SMBIOS type 41 data for these parts. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ regwrites w/ GPIO_DEBUG look correct. Change-Id: Id40655f9fb2ea7b10e1ff58d0b2a8b4cc6f05ff8 Reviewed-on: https://chromium-review.googlesource.com/176299 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-06rambi: Fix eDP panel functionalityDuncan Laurie
For some mysterious reason GPIO_S0_NC22 is making the eDP panel go entirely white when it is configured with internal pullup. Since these (supposedly XDP related) pins are unknown functionality lets set them to GPIO_DEFAULT instead of GPIO_NC. Additionally the VBIOS is being changed to issue int15 callback to determine the boot graphics device. If we list both LFP and EFP then the dev/rec screens will show on the panel when HDMI is not attached and otherwise will display on HDMI. BUG=chrome-os-partner:23507 BRANCH=rambi TEST=build and boot on rambi, see firmware/kernel screens on the panel when HDMI is not attached, and firmware screens on the panel and kernel screens on both when HDMI is attached. Change-Id: Ieb05a591d63c4f8e09fa154eeb76004d32579508 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175952 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4944 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-24rambi: add chromeos EC supportAaron Durbin
As rambi has the ChromeOS EC on it the EC needs to be configured properly. Do this along with updating the ChromeOS support for passing on write protect state, recovery mode and developer mode. BUG=chrome-os-partner:23387 BRANCH=None TEST=Built and booted to depthcharge. EC software sync appears to work correctly. Additionaly, 'mainboard_ec_init' appears in the console output. Change-Id: I40c5c9410b4acaba662c2b18b261dd4514a7410a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174714 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4905 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-05mainboard/google: add initial rambi mainboard supportAaron Durbin
BUG=chrome-os-partner:23121 BRANCH=None TEST=None Change-Id: I283415be326e2d92e1e1bf7866954f17a7266edb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171940 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4865 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 20:42:34 +0000