aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/rambi/devicetree.cb
AgeCommit message (Collapse)Author
2020-07-12soc/intel/baytrail: Add dedicated devices for MMC and MMC 4.5 controllerMate Kukri
- Correctly detect device 17h as the MMC 4.5 controller - Support detection of the "old" MMC controller at device 10h Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Change-Id: I9f0007b1cf01df09f775c088397c3b9c846908c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-04-05mb/google/rambi: use ACPI backlight controlsMatt DeVillier
All variants except NINJA have a built-in display. Enables ACPI brightness controls under Windows. Change-Id: I8dd026608de606fa33f28ccb2967f3beb83b3470 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-03mb/google/rambi: Convert to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Change-Id: I52b71cf12a4e0b67135cfb106c3e89b00205d3bc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39996 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-01-17Combine Baytrail ChromeOS devices using variant schemeMatt DeVillier
Combine existing boards google/enguarde and google/ninja using their common reference board google/rambi as a baseboard. Variants contain board specific data: - DPTF ACPI components - I2C ACPI devices - RAM config / SPD data - devicetree config - GPIOs - board-specific HW components (e.g., LAN) Additionally, some minor cleanup/changes were made: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) The existing enguarde and ninja boards are removed. Variant setup modeled after google/auron Change-Id: Iae7855af9a224fd4cb948b854494e39b545ad449 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18129 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-01-16rambi: configure USBPHY_COMPBG by the setting in devicetree.cbKane Chen
USBPHY_COMPBG needs to be configured by project BUG=chrome-os-partner:30690 BRANCH=none TEST=emerge-rambi coreboot without problem checked the USBPHY_COMPBG is configured properly CQ-DEPEND=CL:208557 Original-Change-Id: I8f2714644e1ef5d790d7ef1f574ebb998abbdac6 Original-Signed-off-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/208731 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 1e9aeebb769e30940175cf3c38afe7ecfa69b5b4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I28aa445ccb4506db65784e30253dd16161b2bc75 Reviewed-on: http://review.coreboot.org/8217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17rambi: align gpu pipea settings with the VBIOSAaron Durbin
In the normal mode case these settings aren't overwritten by the VBIOS because the VBIOS does not run. Therefore, the settings need to align with what the VBIOS programs so that there is a consistent panel power sequencing. BUG=chrome-os-partner:28267 BRANCH=baytrail TEST=Built and booted. Noted settings set by firmware for both dev and normal mode match. Original-Change-Id: Iccf65e2a6bce6859fd7cb0f466d4b44d654523ce Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196822 Original-Reviewed-by: Marc Jones <marc.jones@se-eng.com> (cherry picked from commit 12999018f2b08df0c3b9cdac1f16e9c4517ea803) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Idf1a701ffcb1c990cec2ca1ccca24cc0d26fabbf Reviewed-on: http://review.coreboot.org/7846 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-28rambi: switch MCLK from 19.2Mhz to 25MhzKein Yuan
With following settings 1.Coreboot 25Mhz 2.Maxim codec configured with MCLK=25Mhz 2.I2C 400Khz fixed 4.Including Enable/Disable SHDN bit when LRCLK starts/Stops 5.Removed PLL toggle workaround routine. audio playing is smooth before/after S3, no noise when recording so change MCLK from 19.2 back to 25Mhz. BUG=chrome-os-partner:26948 BRANCH=firmware-rambi-5216 TEST=test audio play and record on Rambi, works fine. Change-Id: I5602feb39721344feab837ff4a3a18309a47a6a6 Signed-off-by: Kein Yuan <kein.yuan@intel.com> Reviewed-on: https://chromium-review.googlesource.com/193881 Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit bfe1d535aa2f20a32e163abeb99f3d657e2b43ab) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7219 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-10-28baytrail: Remove unused devicetree fieldsShawn Nematbakhsh
We're no longer configuring hotplug + backlight settings from devicetree, so remove these entries + fields. BUG=chrome-os-partner:27304 TEST=Compile only. BRANCH=rambi+squawks Change-Id: I7e27fbc070a9ea774e7dcbe551d61b1b1682a47f Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/193831 (cherry picked from commit 4ab13fd3aa2634673bb099bdfd714a21adc3caa0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7218 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-10-22baytrail/rambi: S3 support and other updatesKein Yuan
baytrail: Change all GPIO related pull resistors from 10K to 20K Reviewed-on: https://chromium-review.googlesource.com/187570 (cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e) baytrail: workaround kernel using serial console on resume Reviewed-on: https://chromium-review.googlesource.com/188011 (cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469) baytrail: allow dirty cache line evictions for SMRAM to stick Reviewed-on: https://chromium-review.googlesource.com/188015 (cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca) baytrail: Optionally pull up TDO and TMS to avoid power loss in S3. Reviewed-on: https://chromium-review.googlesource.com/188260 (cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6) rambi: always load option rom Reviewed-on: https://chromium-review.googlesource.com/188721 (cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9) baytrail: use new chromeos ram oops API Reviewed-on: https://chromium-review.googlesource.com/186394 (cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594) rambi: always show dev/rec screens on eDP connected panel Reviewed-on: https://chromium-review.googlesource.com/188731 (cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95) baytrail: stop e820 reserving default SMM region Reviewed-on: https://chromium-review.googlesource.com/189084 (cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24) baytrai: update MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/189196 (cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970) rambi: Put LPE device into ACPI mode Reviewed-on: https://chromium-review.googlesource.com/189371 (cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413) baytrail: DPTF: Enable mainboard-specific PPCC Reviewed-on: https://chromium-review.googlesource.com/189576 (cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612) baytrail: Add config option for PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189994 (cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5) rambi: Enable PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189995 (cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6) Squashed 13 commits for baytrail/rambi. Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6957 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-09-19baytrail/rambi: spi, charger, and audio updatesAaron Durbin
baytrail: combine SPI configuration in romstage Reviewed-on: https://chromium-review.googlesource.com/185140 (cherry picked from commit 4e7f0e8ae1138e478ae7106d54719cf05e13b402) baytrail: lock down registers before handoff Reviewed-on: https://chromium-review.googlesource.com/185200 (cherry picked from commit 82cce4d2b46ccc554b71efa179b5d95756e2ad5e) baytrail: invoke SMM finalization on handoff Reviewed-on: https://chromium-review.googlesource.com/185201 (cherry picked from commit 1b50affb1fdda52a5986c9429713930ed517a86a) rambi: don't invoke SMM finalization Reviewed-on: https://chromium-review.googlesource.com/185202 (cherry picked from commit 6eff475dae7f4536eb846ccf6d51fce262b8ffef) rambi: remove handling of APM_CNT_FINALIZE Reviewed-on: https://chromium-review.googlesource.com/185203 (cherry picked from commit 9fc310d7e2730466cc7fcc84999502a2d4d08bab) baytrail: don't increment boot count on S3 resume Reviewed-on: https://chromium-review.googlesource.com/185381 (cherry picked from commit 940a0fa4df1ce335229eb6f80143b93a84ba358c) rambi: enable HDA device Reviewed-on: https://chromium-review.googlesource.com/184574 (cherry picked from commit 334f2a5c7c6540e744b6aaf7e1da0b55e1368196) baytrail: lock down spi controller according to mainboard Reviewed-on: https://chromium-review.googlesource.com/185631 (cherry picked from commit 696ece68cb6d522c248e800f168e675e4b4a7317) rambi: implement mainboard_get_spi_config() to lock dow spi controller Reviewed-on: https://chromium-review.googlesource.com/185632 (cherry picked from commit 1d9ba15858fd421a4fe5a47f7171273128e89524) baytrail: introduce ssus_disable_internal_pull() Reviewed-on: https://chromium-review.googlesource.com/185740 (cherry picked from commit 9d6056dd70b27183dab6a4656f4f9612ae870a4d) rambi: fix write-protect gpio reading at romstage Reviewed-on: https://chromium-review.googlesource.com/185741 (cherry picked from commit c64627689b1afec59be6fdab323d5492046f0bc7) baytrail: DPTF: implement charger current limit Reviewed-on: https://chromium-review.googlesource.com/185759 (cherry picked from commit 287e8936613a7a83281ff692b20383dacf7fcaf6) rambi: Enable charger participant and define states Reviewed-on: https://chromium-review.googlesource.com/185760 (cherry picked from commit 2f62a11927ecf10cb2c76a9f5d368d4050404137) baytrail: increase command wait timeout Reviewed-on: https://chromium-review.googlesource.com/185874 (cherry picked from commit 962a79ef72169b5d52fc746d1889d3b652fd9bcc) baytrail: make caching MRC data more robust Reviewed-on: https://chromium-review.googlesource.com/185875 (cherry picked from commit b5e10ad47b9e4f330caaee4faf69702f24d6bdd8) baytrail: upgrade MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/186391 (cherry picked from commit 8c1a62f1f4261d4f38aacbbb353c9d6218ec2885) rambi: instruct MRC to use weaker memory ODT settings Reviewed-on: https://chromium-review.googlesource.com/186420 (cherry picked from commit b9329126ca08d20ce1d8c5db0fcabd39140c7292) rambi: Move touch wakeup resource GPIO to separate device Reviewed-on: https://chromium-review.googlesource.com/186932 (cherry picked from commit ba44e2e04f9469c629cb61a911c8cd339f52b0ef) baytrail: Set some MSRs related to turbo power Reviewed-on: https://chromium-review.googlesource.com/186933 (cherry picked from commit 76b25df5a31914ae58d47d17af448216011e425c) baytrail: change power consumption number for ACPI_C3/C6FS. Reviewed-on: https://chromium-review.googlesource.com/186934 (cherry picked from commit 5192e2464fbb88ea6fc117070240c9733e34f065) baytrail: Fix use of ConcatenateResTemplate() in ACPI LPE device Reviewed-on: https://chromium-review.googlesource.com/186928 (cherry picked from commit 8d1ab5de1d43b0790d140f6d0e36a990a5049ece) baytrail: Disable P-state HW coordination on 4-core SKU Reviewed-on: https://chromium-review.googlesource.com/187575 (cherry picked from commit c19c0f1d7cb3cb2635766c186ba9598933424a78) baytrail: DPTF: Enable mainboard-specific _PDL Reviewed-on: https://chromium-review.googlesource.com/187576 (cherry picked from commit 5412ac5c07bee22017a0ee6d1e2433917b98ea87) rambi: Apply DPTF tuning parameters Reviewed-on: https://chromium-review.googlesource.com/187577 (cherry picked from commit 932a5a3803ceaf430ad2934b371ac0886c25efca) rambi : change lpe_codec_clk_freq to 19.2 Reviewed-on: https://chromium-review.googlesource.com/187594 (cherry picked from commit f64cb1ae77076ad5ec994670f4a83dc561ea80c4) Squashed 25 commits for baytrail/rambi. Change-Id: Ibe628ac974d117a09361f7f3131a488911ddd27d Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2014-09-18rambi/baytrail: ACPI, GPIO, audio, misc updatesShawn Nematbakhsh
rambi: Change RAM_ID GPIOs to GPIO_INPUT Reviewed-on: https://chromium-review.googlesource.com/182934 (cherry picked from commit 8afd981a091a3711ff3b55520fe73f57f7258cc0) baytrail: initialize rtc device Reviewed-on: https://chromium-review.googlesource.com/183051 (cherry picked from commit 1b80d71e4942310bd7e83c5565c6a06c30811821) baytrail: Set SOC power budget values for SdpProfile 2&3 Reviewed-on: https://chromium-review.googlesource.com/183101 (cherry picked from commit 87d49323cac4492c23f910bd7d43b83b3c8a9b55) baytrail: Set PMC PTPS register correctly Reviewed-on: https://chromium-review.googlesource.com/183280 (cherry picked from commit 1b520b577f2bf1b124db301f57421665b637f9ad) baytrail: update to version 809 microcode for c0 Reviewed-on: https://chromium-review.googlesource.com/183256 (cherry picked from commit 8ed0ef4c3bed1196256c691be5b80563b81baa5e) baytrail: Add a shared GNVS init function Reviewed-on: https://chromium-review.googlesource.com/183332 (cherry picked from commit 969dffda1d3d0adaee58d604b6eeea13a41a408c) baytrail: Add basic support for ACPI System Wake Source Reviewed-on: https://chromium-review.googlesource.com/183333 (cherry picked from commit a6b85ad950fb3a51d12cb91c869420b72b433619) baytrail: allow configuration of io hole size Reviewed-on: https://chromium-review.googlesource.com/183269 (cherry picked from commit 95a79aff57ec7bf4bcbf0207a017c9dab10c1919) baytrail: add in C0 stepping idenitification support. Reviewed-on: https://chromium-review.googlesource.com/183594 (cherry picked from commit 8ad02684b25f2870cdea334fbd081f0ef4467cd4) baytrail: add option for enabling PS2 mode Reviewed-on: https://chromium-review.googlesource.com/183595 (cherry picked from commit c92db75de5edc2ff745c1d40155e8b654ad3d49f) rambi: enable PS2 mode for VNN and VCC Reviewed-on: https://chromium-review.googlesource.com/183596 (cherry picked from commit 821ce0e72c93adb60404a4dc4ff8c0f6285cbdf9) baytrail: add config option for disabling slp_x stretching Reviewed-on: https://chromium-review.googlesource.com/183587 (cherry picked from commit f99804c2649bef436644dd300be2a595659ceece) rambi: disable slp_x stretching after sus fail Reviewed-on: https://chromium-review.googlesource.com/183588 (cherry picked from commit 753fadb6b9e90fc8d1c5092d50b20a2826d8d880) baytrail: ACPI_ENABLE_WAKE_SUS_GPIO macro for ACPI Reviewed-on: https://chromium-review.googlesource.com/183597 (cherry picked from commit 78775098a87f46b3bb66ade124753a195a5fa906) rambi: fix trackpad and touchscreen wake sources Reviewed-on: https://chromium-review.googlesource.com/183598 (cherry picked from commit 3022c82b020f4cafeb5be7978eef6045d1408cd5) baytrail: Add support for LPE device in ACPI mode Reviewed-on: https://chromium-review.googlesource.com/184006 (cherry picked from commit 398387ed75a63ce5a6033239ac24b5e1d77c8c9f) rambi: Add LPE GPIOs for Jack/Mic detect Reviewed-on: https://chromium-review.googlesource.com/184007 (cherry picked from commit edde584bb23bae1e703481e0f33a1f036373a578) rambi: Set TSRx passive threshold to 60C Reviewed-on: https://chromium-review.googlesource.com/184008 (cherry picked from commit 1d6aeb85fd1af64d5f7c564c6709a1cf6daad5ee) baytrail: DPTF: Add PPCC object for power limit information Reviewed-on: https://chromium-review.googlesource.com/184158 (cherry picked from commit e9c002c393d8b4904f9d57c5c8e7cf1dfce5049b) baytrail: DPTF: Add _CRT/_PSV objects for the CPU participant Reviewed-on: https://chromium-review.googlesource.com/184442 (cherry picked from commit e04c20962aede1aa9e6899bd3072daa82e8613bd) rambi: Move the CPU passive/critical threshold config to DPTF Reviewed-on: https://chromium-review.googlesource.com/184443 (cherry picked from commit dda468793143a6d288981b6d7e1cd5ef4514c2ac) baytrail: Fix XHCI controller reset on resume Reviewed-on: https://chromium-review.googlesource.com/184500 (cherry picked from commit 0457b5dce1860709fcce1407e42ae83023b463cd) baytrail: update lpe audio firmware location Reviewed-on: https://chromium-review.googlesource.com/184481 (cherry picked from commit 0472e6bd45cb069fbe4939c6de499e03c3707ba6) rambi: Put LPSS devices in ACPI mode Reviewed-on: https://chromium-review.googlesource.com/184530 (cherry picked from commit 52bec109860b95e2d6260d5433f33d0923a05ce1) baytrail: initialize HDA device and HDMI codec Reviewed-on: https://chromium-review.googlesource.com/184710 (cherry picked from commit 393198705034aa9c6935615dda6eba8b6bd5c961) baytrail: provide GPIO_ACPI_WAKE configuration Reviewed-on: https://chromium-review.googlesource.com/184718 (cherry picked from commit 44558c3346f5b96cf7b3dcb25a23b4e99855497b) rambi: configure wake pins as just wake sources Reviewed-on: https://chromium-review.googlesource.com/184719 (cherry picked from commit ee4620a90a131dce49f96b2da7f0a3bb70b13115) baytrail: I2C: Add config data to ACPI Device Reviewed-on: https://chromium-review.googlesource.com/184922 (cherry picked from commit ffb73af007e77faf497fbc3321c8163d18c24ec8) Squashed 28 commits for rambi and baytrail. Change-Id: If6060681bb5dc9432a54e6f3c6af9d8080debad8 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-12rambi: Disable HSUART2 and SPI interfacesDuncan Laurie
Not used currently on rambi board. Disable in case it saves power. BUG=chrome-os-partner:23862 BRANCH=none TEST=build and boot on rambi Change-Id: Idb870c2cfa88cb6c3f1ada3caf0db566e33ec1eb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180084 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5020 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-12rambi: Enable SCC devices in ACPI modeDuncan Laurie
With the ACPI GNVS exported and depthcharge changed to initialize eMMC in ACPI mode we can now put the SCC devices into ACPI mode. BUG=chrome-os-partner:24380 BRANCH=none TEST=build and boot on rambi, test eMMC and SD card Change-Id: I39716198f8227c0c3293ac23eb09660792e2c51b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179901 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5018 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-09rambi: Set panel power timingsDuncan Laurie
These are the values that are seen with VBIOS and may need tweaked for derivative panels. BUG=chrome-os-partner:24367 BRANCH=none TEST=boot on rambi in normal mode and see the panel come up Change-Id: Ie3120ab3c5298135626e8534d3954acd263dc74b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179365 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5001 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-09rambi: limit SD card controller to 2.0 specAaron Durbin
The rambi board can only meet the SD card 2.0 specification. Therefore, the controller capabilities need to be overridden to match. BUG=chrome-os-partner:24423 BRANCH=None TEST=Built and booted. /sys/kernel/debug/mmc0/ios shows high speed as maximum timing as well as 3.3V signal voltage. Change-Id: Ib3824800852376e0f15a70584917d6692087ccfe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179415 Reviewed-on: http://review.coreboot.org/4998 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-08rambi: configure the LPE audio codec clockAaron Durbin
Rambi has the LPE audio codec connected to PMC_PLT_CLK[0]. Configure it for 25MHz. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted. Noted message in console output. Change-Id: I11297ba951149e5831c65ca70ac7bdbbed113098 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178781 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4987 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-06rambi: disable HDA deviceAaron Durbin
For some reason HDA can now be disabled. It's unclear what changes in the baytrail code allowed this to happen, sadly. BUG=chrome-os-partner:22871 BRANCH=None TEST=Noted hda is not in lspci. Change-Id: I64e2560533be6f701fa66cd53c906b62b09012ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176394 Reviewed-on: http://review.coreboot.org/4961 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-30baytrail: Fix XHCI problems and re-enableDuncan Laurie
- a few clock gating bits were set improperly and were preventing the system from transitioning out of S0 state. - the XHCC registers were not getting the top byte set properly which includes things like DMA write request size and request boundary crossing control. This was causing memory corruption. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=build and boot kernel from USB on rambi with XHCI driver Change-Id: I8e8135a793dfbaa1f163766702e3a8f19bba9703 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175558 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4933 Tested-by: build bot (Jenkins)
2014-03-11rambi: Enable USB boot with EHCI controllerDuncan Laurie
This adds the EHCI driver back to libpayload and configures the devicetree to route ports to EHCI. This is hopefully just temporary until the issues with XHCI can be worked out. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=build and boot from USB on rambi Change-Id: I0549661f5e5fd83477f4839a05e7e21175b24b64 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175513 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4931 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-27rambi: Enable internal keyboardDuncan Laurie
The EC LPC init function needs to run to enable the internal keyboard. I needed this to confirm that it is just USB keyboards that are causing all sorts of issues. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=boot to recovery screen and hit tab Change-Id: Iea0fc66ba62ea7da71ef83c26e25ae32bef102bd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175207 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4915 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27rambi: Enable SATA portShawn Nematbakhsh
Enable first SATA port in Rambi device tree. BUG=chrome-os-partner:23643 TEST=TEST=Manual, in dev mode. Verify on rambi that SATA disk is detected, and kernel is found + booted. Change-Id: Ic0cb5f9ff17ca0f6cc7941f203b9338df200811d Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174916 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4914 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27rambi: add all on-board devicesAaron Durbin
Add the on-board devices in the SoC to the device tree. Also, disable the unused devices aside from TXE and HDA. Those particular devices cause the system to shut down when they are disabled. BUG=chrome-os-partner:22871 BRANCH=None TEST=Built and booted through depthcharge. Noted the calls to the southcluster disable function. Change-Id: I482c1c9609833054aeb2948144af54b57d3df086 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174645 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4912 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-16rambi: add BSP lapic deviceAaron Durbin
There's some baked in assumptions internal to coreboot that the BSP's cpu device exists in the device tree. Therefore provide one in the device tree. BUG=chrome-os-partner:22862 BRANCH=None TEST=Compiled and booted with other changes. Change-Id: I22ba10964760ee8efbc5bbd5d4ce65daf31b3839 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173702 Reviewed-on: http://review.coreboot.org/4887 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-05mainboard/google: add initial rambi mainboard supportAaron Durbin
BUG=chrome-os-partner:23121 BRANCH=None TEST=None Change-Id: I283415be326e2d92e1e1bf7866954f17a7266edb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171940 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4865 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 10:31:33 +0000