summaryrefslogtreecommitdiff
path: root/src/mainboard/google/rambi/Makefile.inc
AgeCommit message (Collapse)Author
2017-02-01Add Baytrail ChromeOS devices using variant schemeMatt DeVillier
Add new ChromeOS devices banjo, candy, clapper, glimmer, gnawty, heli, kip, orco, quawks, squawks, sumo, swanky, and winky using their common reference board (rambi) as a base. Chromium sources used: firmware-banjo-5216.334.B 32ec493 [chromeos: vboot_loader: Set...] firmware-candy-5216.310.B 519ff11 [baytrail: Preserve VbNv around...] firmware-clapper-5216.199.B 80d55e3 [baytrail: add code for...] firmware-glimmer-5216.198.B fae0770 [baytrail: add code for...] firmware-gnawty-5216.239.B 952adb7 [Gnawty/Olay: Add 2nd source...] firmware-heli-5216.392.B f1f3604 [helis: Lock ME / TXE section...] firmware-kip-5216.227.B db3c5d9 [kip: update spd for for MT41K256M16*] firmware-orco-5216.362.B 76f1651 [Orco: Adjust rx delay for norm.] firmware-quawks-5216.204.B edb60c9 [Quawks: Update SPD data] firmware-squawks-5216.152.B c6573dc [Squawks: Update SPD data] firmware-sumo-5216.382.B c62b6f23 [Ninja, Sumo: Add SPD source...] firmware-swanky-5216.238.B 233b2a7 [Swanky: update SPD table] firmware-winky-5216.265.B ce91ffc [Add to support HT Micron...] The same basic cleanup/changes are made here as with the initial BYT variant commit: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) - Micron 2GB SPD file for kip with updated values renamed to distinguish from same file used by other boards Change-Id: Ic66f9b539afb5aff32c4c1a8563f6612f5a2927c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18164 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-17Combine Baytrail ChromeOS devices using variant schemeMatt DeVillier
Combine existing boards google/enguarde and google/ninja using their common reference board google/rambi as a baseboard. Variants contain board specific data: - DPTF ACPI components - I2C ACPI devices - RAM config / SPD data - devicetree config - GPIOs - board-specific HW components (e.g., LAN) Additionally, some minor cleanup/changes were made: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) The existing enguarde and ninja boards are removed. Variant setup modeled after google/auron Change-Id: Iae7855af9a224fd4cb948b854494e39b545ad449 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18129 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-09-19baytrail/rambi: spi, charger, and audio updatesAaron Durbin
baytrail: combine SPI configuration in romstage Reviewed-on: https://chromium-review.googlesource.com/185140 (cherry picked from commit 4e7f0e8ae1138e478ae7106d54719cf05e13b402) baytrail: lock down registers before handoff Reviewed-on: https://chromium-review.googlesource.com/185200 (cherry picked from commit 82cce4d2b46ccc554b71efa179b5d95756e2ad5e) baytrail: invoke SMM finalization on handoff Reviewed-on: https://chromium-review.googlesource.com/185201 (cherry picked from commit 1b50affb1fdda52a5986c9429713930ed517a86a) rambi: don't invoke SMM finalization Reviewed-on: https://chromium-review.googlesource.com/185202 (cherry picked from commit 6eff475dae7f4536eb846ccf6d51fce262b8ffef) rambi: remove handling of APM_CNT_FINALIZE Reviewed-on: https://chromium-review.googlesource.com/185203 (cherry picked from commit 9fc310d7e2730466cc7fcc84999502a2d4d08bab) baytrail: don't increment boot count on S3 resume Reviewed-on: https://chromium-review.googlesource.com/185381 (cherry picked from commit 940a0fa4df1ce335229eb6f80143b93a84ba358c) rambi: enable HDA device Reviewed-on: https://chromium-review.googlesource.com/184574 (cherry picked from commit 334f2a5c7c6540e744b6aaf7e1da0b55e1368196) baytrail: lock down spi controller according to mainboard Reviewed-on: https://chromium-review.googlesource.com/185631 (cherry picked from commit 696ece68cb6d522c248e800f168e675e4b4a7317) rambi: implement mainboard_get_spi_config() to lock dow spi controller Reviewed-on: https://chromium-review.googlesource.com/185632 (cherry picked from commit 1d9ba15858fd421a4fe5a47f7171273128e89524) baytrail: introduce ssus_disable_internal_pull() Reviewed-on: https://chromium-review.googlesource.com/185740 (cherry picked from commit 9d6056dd70b27183dab6a4656f4f9612ae870a4d) rambi: fix write-protect gpio reading at romstage Reviewed-on: https://chromium-review.googlesource.com/185741 (cherry picked from commit c64627689b1afec59be6fdab323d5492046f0bc7) baytrail: DPTF: implement charger current limit Reviewed-on: https://chromium-review.googlesource.com/185759 (cherry picked from commit 287e8936613a7a83281ff692b20383dacf7fcaf6) rambi: Enable charger participant and define states Reviewed-on: https://chromium-review.googlesource.com/185760 (cherry picked from commit 2f62a11927ecf10cb2c76a9f5d368d4050404137) baytrail: increase command wait timeout Reviewed-on: https://chromium-review.googlesource.com/185874 (cherry picked from commit 962a79ef72169b5d52fc746d1889d3b652fd9bcc) baytrail: make caching MRC data more robust Reviewed-on: https://chromium-review.googlesource.com/185875 (cherry picked from commit b5e10ad47b9e4f330caaee4faf69702f24d6bdd8) baytrail: upgrade MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/186391 (cherry picked from commit 8c1a62f1f4261d4f38aacbbb353c9d6218ec2885) rambi: instruct MRC to use weaker memory ODT settings Reviewed-on: https://chromium-review.googlesource.com/186420 (cherry picked from commit b9329126ca08d20ce1d8c5db0fcabd39140c7292) rambi: Move touch wakeup resource GPIO to separate device Reviewed-on: https://chromium-review.googlesource.com/186932 (cherry picked from commit ba44e2e04f9469c629cb61a911c8cd339f52b0ef) baytrail: Set some MSRs related to turbo power Reviewed-on: https://chromium-review.googlesource.com/186933 (cherry picked from commit 76b25df5a31914ae58d47d17af448216011e425c) baytrail: change power consumption number for ACPI_C3/C6FS. Reviewed-on: https://chromium-review.googlesource.com/186934 (cherry picked from commit 5192e2464fbb88ea6fc117070240c9733e34f065) baytrail: Fix use of ConcatenateResTemplate() in ACPI LPE device Reviewed-on: https://chromium-review.googlesource.com/186928 (cherry picked from commit 8d1ab5de1d43b0790d140f6d0e36a990a5049ece) baytrail: Disable P-state HW coordination on 4-core SKU Reviewed-on: https://chromium-review.googlesource.com/187575 (cherry picked from commit c19c0f1d7cb3cb2635766c186ba9598933424a78) baytrail: DPTF: Enable mainboard-specific _PDL Reviewed-on: https://chromium-review.googlesource.com/187576 (cherry picked from commit 5412ac5c07bee22017a0ee6d1e2433917b98ea87) rambi: Apply DPTF tuning parameters Reviewed-on: https://chromium-review.googlesource.com/187577 (cherry picked from commit 932a5a3803ceaf430ad2934b371ac0886c25efca) rambi : change lpe_codec_clk_freq to 19.2 Reviewed-on: https://chromium-review.googlesource.com/187594 (cherry picked from commit f64cb1ae77076ad5ec994670f4a83dc561ea80c4) Squashed 25 commits for baytrail/rambi. Change-Id: Ibe628ac974d117a09361f7f3131a488911ddd27d Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2014-05-08ChromeOS boards: Always build code for bootmode strapsKyösti Mälkki
Leave it under BOOTMODE_STRAPS to control whether these have any functional meaning on the build. Change-Id: Ieb59aa7ab4b1e8da6a1002e7a8e5462eb7988d35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5643 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05baytrail: interrupt routing supportAaron Durbin
This provides the initial support for interrupt routing in bay trail. It includes both acpi changes and board changes to ensure the interdependencies are met with the current ASL code. The PIRQ routing is handled by the mainboard exporting an irqroute.h header that describes the per device and PIRQ PCI settings. There are still a lot of ACPI errors in the kernel with this change, though. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted rambi into kernel. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id8a865a24fc8d49743c0b54efdb64aaef52fcd8e Reviewed-on: https://chromium-review.googlesource.com/175700 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4940 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-24rambi: add chromeos EC supportAaron Durbin
As rambi has the ChromeOS EC on it the EC needs to be configured properly. Do this along with updating the ChromeOS support for passing on write protect state, recovery mode and developer mode. BUG=chrome-os-partner:23387 BRANCH=None TEST=Built and booted to depthcharge. EC software sync appears to work correctly. Additionaly, 'mainboard_ec_init' appears in the console output. Change-Id: I40c5c9410b4acaba662c2b18b261dd4514a7410a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174714 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4905 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-11rambi: add per-sku SPD supportAaron Durbin
There are currently 4 SKUs: 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz Add each of the 4 spds to the build, and use the proper parameters to MRC to use the in-memory SPD information. BUG=chrome-os-partner:22865 BRANCH=None TEST=Built. Noted 1024 bytes of SPD content. Change-Id: Ife96650f9b0032b6bd0d1bdd63b8970e29868365 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172280 Reviewed-on: http://review.coreboot.org/4872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-05mainboard/google: add initial rambi mainboard supportAaron Durbin
BUG=chrome-os-partner:23121 BRANCH=None TEST=None Change-Id: I283415be326e2d92e1e1bf7866954f17a7266edb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171940 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4865 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 18:32:59 +0000