summaryrefslogtreecommitdiff
path: root/src/mainboard/google/rambi/Kconfig
AgeCommit message (Collapse)Author
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-23google mainboards: select SYSTEM_TYPE_LAPTOP where appropriateMatt DeVillier
Some Google boards are missing this selection, leading them to being incorrectly identified as type 'Desktop' in SMBIOS type 3 table. Correct this by adding 'select SYSTEM_TYPE_LAPTOP' to the boards' Kconfigs. TEST: boot Linux and check correct chassis type listed via dmidecode Change-Id: Ib1145e314812a3f300cfd1a435a687aa0862158a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-27mb/google: Remove ChromeEC builds for auron and rambiMartin Roth
The ChromeEC board directories for auron and rambi have been removed from the latest version of ChromeEC. Remove them here so the submodule can be brought forward. Change-Id: I763d03009f735d3f8aedbeb44788d03714c86102 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
The virtualized developer switch was invented five years ago and has been used on every vboot system ever since. We shouldn't need to specify it again and again for every new board. This patch flips the Kconfig logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the latter for Lumpy which seems to have been omitted incorrectly, and hide it from menuconfig since it's a hardware parameter that shouldn't be configurable.) Since almost all our developer switches are virtual, it doesn't make sense for every board to pass a non-existent or non-functional developer mode switch in the coreboot tables, so let's get rid of that. It's also dangerously confusing for many boards to define a get_developer_mode() function that reads an actual pin (often from a debug header) which will not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set. Therefore, this patch removes all those non-functional instances of that function. In the future, either the board has a physical dev switch and must define it, or it doesn't and must not. In a similar sense (and since I'm touching so many board configs anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC. Instead, it should just be assumed by default whenever a Chrome EC is present in the system. This way, it can also still be overridden by menuconfig. CQ-DEPEND=CL:459701 Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18980 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-01Add Baytrail ChromeOS devices using variant schemeMatt DeVillier
Add new ChromeOS devices banjo, candy, clapper, glimmer, gnawty, heli, kip, orco, quawks, squawks, sumo, swanky, and winky using their common reference board (rambi) as a base. Chromium sources used: firmware-banjo-5216.334.B 32ec493 [chromeos: vboot_loader: Set...] firmware-candy-5216.310.B 519ff11 [baytrail: Preserve VbNv around...] firmware-clapper-5216.199.B 80d55e3 [baytrail: add code for...] firmware-glimmer-5216.198.B fae0770 [baytrail: add code for...] firmware-gnawty-5216.239.B 952adb7 [Gnawty/Olay: Add 2nd source...] firmware-heli-5216.392.B f1f3604 [helis: Lock ME / TXE section...] firmware-kip-5216.227.B db3c5d9 [kip: update spd for for MT41K256M16*] firmware-orco-5216.362.B 76f1651 [Orco: Adjust rx delay for norm.] firmware-quawks-5216.204.B edb60c9 [Quawks: Update SPD data] firmware-squawks-5216.152.B c6573dc [Squawks: Update SPD data] firmware-sumo-5216.382.B c62b6f23 [Ninja, Sumo: Add SPD source...] firmware-swanky-5216.238.B 233b2a7 [Swanky: update SPD table] firmware-winky-5216.265.B ce91ffc [Add to support HT Micron...] The same basic cleanup/changes are made here as with the initial BYT variant commit: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) - Micron 2GB SPD file for kip with updated values renamed to distinguish from same file used by other boards Change-Id: Ic66f9b539afb5aff32c4c1a8563f6612f5a2927c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18164 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-17Combine Baytrail ChromeOS devices using variant schemeMatt DeVillier
Combine existing boards google/enguarde and google/ninja using their common reference board google/rambi as a baseboard. Variants contain board specific data: - DPTF ACPI components - I2C ACPI devices - RAM config / SPD data - devicetree config - GPIOs - board-specific HW components (e.g., LAN) Additionally, some minor cleanup/changes were made: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) The existing enguarde and ninja boards are removed. Variant setup modeled after google/auron Change-Id: Iae7855af9a224fd4cb948b854494e39b545ad449 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18129 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
Instead of defining the same functions for reading/clearing boot-mode switches from EC in every mainboard, add a common infrastructure to enable common functions for handling boot-mode switches if GOOGLE_CHROMEEC is being used. Only boards that were not moved to this new infrastructure are those that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific mechanism for reading boot-mode switches. BUG=None BRANCH=None TEST=abuild compiles all boards successfully with and without ChromeOS option. Change-Id: I267aadea9e616464563df04b51a668b877f0d578 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17449 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use of verified boot library without having to stick to CHROMEOS. BUG=chrome-os-partner:55639 Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15867 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-02-12chromebooks: Define GBB hardware IDsPatrick Georgi
This makes the test IDs the default, taken from depthcharge master (board/*/fmap.dts, hwid property). Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13634 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-09chromebooks: Configure Chrome EC board namesPatrick Georgi
For devices with Chrome EC, state the "board" name(s), so they're built as part of the image. A number of EC boards aren't supported in the Chrome EC master branch, they're brought along but commented out, waiting for a port to master in the Chrome EC code base. Change-Id: Ic6ab821de55cf9b4e8b48fe5ebc603adeb8bb28b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13548 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-24google/rambi: Fix IASL warnings _CRS must return a valueMartin Roth
The Touchpad and Touchscreen _CRS methods do not return an interrupt value if the I2c busses that the devices are on are not in PCI mode. Previously they didn't return any value if they weren't in PCI mode. This patch has them return an empty resource template. Fixes these warnings: dsdt.aml 2813: Method (_CRS) Warning 3115 - ^ Not all control paths return a value (_CRS) dsdt.aml 2813: Method (_CRS) Warning 3107 - ^ Reserved method must return a value (Buffer required for _CRS) dsdt.aml 2832: Method (_CRS) Warning 3115 - ^ Not all control paths return a value (_CRS) dsdt.aml 2832: Method (_CRS) Warning 3107 - ^ Reserved method must return a value (Buffer required for _CRS) Change-Id: I02a29e56a513ec34a98534fb4a8d51df3b70a522 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12519 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-23google/rambi: Fix end comment in KconfigMartin Roth
Change-Id: I3963d145f6d209e32256268259e93103c62809c5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12504 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-11-23IASL: Enable warnings as errorsMartin Roth
We've actually got more warnings now than when I first tested IASL warnings as errors. Because of this, I'm adding it with the option to have it disabled, in hopes that things won't get any worse as we work on fixing the IASL warnings that are currently in the codebase. - Enable IASL warnings as errors - Disable warnings as errors in mainboards that currently have warnings. - Print a really obnoxious message on those platforms when they build. ***** WARNING: IASL warnings as errors is disabled! ***** ***** Please fix the ASL for this platform. ***** Change-Id: If0da0ac709bd8c0e8e2dbd3a498fe6ecb5500a81 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-30Kconfig: Don't 'select' options based on PAYLOAD_SEABIOSAlexandru Gagniuc
This is just wrong. PAYLOAD_SEABIOS tells us nothing about whether or not the payload will actually be SeaBIOS: 1. PAYLOAD_SEABIOS, but payload changed with cbfstool 2. !PAYLOAD_SEABIOS, but an elf payload was added which is SeaBIOS et. cetera. Change-Id: I4c17e8dde20bf21537f542fda2dad7d3a1894862 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11293 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2015-08-26ChromeOS mainboards: Move more Kconfig symbols under CHROMEOSMartin Roth
Move the CHROMEOS dependent symbols VIRTUAL_DEV_SWITCH and VBOOT_DYNAMIC_WORK_BUFFER under the CHROMEOS config options for the mainboards that use them. Change-Id: Iad126cf045cb3a312319037aff3c4b1f15f6529d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
Add CHROMEOS dependencies to selects for the following Kconfig symbols: CHROMEOS_RAMOOPS_DYNAMIC CHROMEOS_RAMOOPS_NON_ACPI CHROMEOS_VBNV_CMOS CHROMEOS_VBNV_EC CHROMEOS_VBNV_FLASH EC_SOFTWARE_SYNC LID_SWITCH RETURN_FROM_VERSTAGE SEPARATE_VERSTAGE VBOOT_DISABLE_DEV_ON_RECOVERY VBOOT_EC_SLOW_UPDATE VBOOT_OPROM_MATTERS VBOOT_STARTS_IN_BOOTBLOCK WIPEOUT_SUPPORTED This gets rid of these sorts of Kconfig errors: warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS) Note: These two boards would never actually have CHROMEOS enabled: intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-17Fix Kconfig: ALWAYS_LOAD_OPROM has unmet dependency VGA_ROM_RUNMartin Roth
Broadwell and Skylake chipsets, along with a few mainboards were selecting ALWAYS_LOAD_OPROM without making sure that the dependency for that symbol was met as well. Looking at the dependencies for VGA_RUN_ROM, we see: PCI && !PAYLOAD_SEABIOS && !MAINBOARD_DO_NATIVE_VGA_INIT Since ARCH_X86 selects PCI, that's always met here. Since Broadwell and Skylake don't have native VGA init yet, that's not needed. - Make sure that VGA_RUN_ROM is selected as well. - Add dependency on !PAYLOAD_SEABIOS for both ALWAYS_LOAD_OPROM and VGA_RUN_ROM symbols where they're selected. Fixes Kconfig warning for these boards and chipsets: warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS) selects ALWAYS_LOAD_OPROM which has unmet direct dependencies (VGA_ROM_RUN) Change-Id: I787a87e9467e1fc7afe8b04864b2a89b54824b9f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-30Add Kconfig flag to specify if there's a lid switchPatrick Georgi
Not all devices have a lid switch, so we need to state this somehow. Since the alternative would be to extend get_lid_switch()'s semantics to become a tri-state (open, closed, N/A), do this through Kconfig. BRANCH=none BUG=chromium:446945 TEST=none Change-Id: Icc50f72535f256051a59925a178fb27b2e8f7e55 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d20a1d1a22d64546a5d8761b18ab29732ec0b848 Original-Change-Id: Ie8ac401fbaad5b5a9f1dec2b67847c81f4cc94aa Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/273850 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Queue: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-27Move TPM code out of chromeosVladimir Serbinenko
This code is not specific to ChromeOS and is useful outside of it. Like with small modifications it can be used to disable TPM altogether. Change-Id: I8c6baf0a1f7c67141f30101a132ea039b0d09819 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10269 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-04-28boards: remove VBOOT_(REFCODE|RAMSTAGE|ROMSTAGE)_INDEXAaron Durbin
These options will need to just be selected in within the .config files. There's not need in duplicating all these options. Change-Id: I7b670bc59a3b35e39eee4faecaf4aa779d47a3bb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9959 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-22mainboards: Add CHROMEOS_VBNV_* where appropriatePatrick Georgi
For boards with MAINBOARD_HAS_CHROMEOS, we should also state what kind of storage is available for vboot's non-volatile data. The flags are taken from the chromium repository and have no effect with CHROMEOS disabled. Change-Id: I1747ad26c8c7f6d4076740ec2800dbd52c5d6b3d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2014-10-22baytrail/rambi: S3 support and other updatesKein Yuan
baytrail: Change all GPIO related pull resistors from 10K to 20K Reviewed-on: https://chromium-review.googlesource.com/187570 (cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e) baytrail: workaround kernel using serial console on resume Reviewed-on: https://chromium-review.googlesource.com/188011 (cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469) baytrail: allow dirty cache line evictions for SMRAM to stick Reviewed-on: https://chromium-review.googlesource.com/188015 (cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca) baytrail: Optionally pull up TDO and TMS to avoid power loss in S3. Reviewed-on: https://chromium-review.googlesource.com/188260 (cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6) rambi: always load option rom Reviewed-on: https://chromium-review.googlesource.com/188721 (cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9) baytrail: use new chromeos ram oops API Reviewed-on: https://chromium-review.googlesource.com/186394 (cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594) rambi: always show dev/rec screens on eDP connected panel Reviewed-on: https://chromium-review.googlesource.com/188731 (cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95) baytrail: stop e820 reserving default SMM region Reviewed-on: https://chromium-review.googlesource.com/189084 (cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24) baytrai: update MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/189196 (cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970) rambi: Put LPE device into ACPI mode Reviewed-on: https://chromium-review.googlesource.com/189371 (cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413) baytrail: DPTF: Enable mainboard-specific PPCC Reviewed-on: https://chromium-review.googlesource.com/189576 (cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612) baytrail: Add config option for PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189994 (cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5) rambi: Enable PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189995 (cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6) Squashed 13 commits for baytrail/rambi. Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6957 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-12rambi: specify reference code index in vboot areaAaron Durbin
Rambi's reference code will live at slot 3 in the verified firmware section. BUG=chrome-os-partner:22867 BRANCH=None TEST=Built and booted. Verified correct area where reference code was loaded from. Change-Id: I8bee46600429ac8f732fe334852f69aff1324150 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180027 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/5024 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-07rambi: fixup settings so trackpad can be found in kernelAaron Durbin
The kernel chromeos_laptop driver nomenclature expects the board name to not be in all caps. Fix this as well as the i2c address for the trackpad. BUG=chrome-os-partner:24307 BRANCH=None TEST=Built and booted. trackpad device is found. IRQs still not working yet. Change-Id: Id6be8ee4bce2835e303ea4fe63944be80d2d7ec2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176680 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4970 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-24rambi: add chromeos EC supportAaron Durbin
As rambi has the ChromeOS EC on it the EC needs to be configured properly. Do this along with updating the ChromeOS support for passing on write protect state, recovery mode and developer mode. BUG=chrome-os-partner:23387 BRANCH=None TEST=Built and booted to depthcharge. EC software sync appears to work correctly. Additionaly, 'mainboard_ec_init' appears in the console output. Change-Id: I40c5c9410b4acaba662c2b18b261dd4514a7410a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174714 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4905 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-17rambi: Set VBOOT_RAMSTAGE_INDEX to point to ramstage imageShawn Nematbakhsh
The ramstage image is the third image in the partition (after ECRW hash and depthcharge image). TEST=Manual. Boot rambi, verify that ramstage image is correctly found: "RW ramstage image at 0xffb1dc70, 0x0000f391 bytes" BUG=None. Change-Id: I628db3daf0b109106c51693960487a0c83b4e9f4 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174540 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4899 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-14google/rambi: Do not select CHROMEOS in KconfigAlexandru Gagniuc
CHROMEOS is the meant to be selected by the user. The correct variable for a mainboard to select is MAINBOARD_HAS_CHROMEOS. This will then default to a CHROMEOS build, but when the mainboard selects CHROMEOS, the user can no longer disable CHROMEOS. Change-Id: I78fb15a0a9fef733e2de064d6c09cf774b7bce78 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5218 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-02-12google boards: Do not hardcode location of spd.binAlexandru Gagniuc
spd.bin can reside anywhere in CBFS, and we only use CBFS APIs to access and read it. As such, there is no need to hardcode it, and it can collide with mrc.bin or mrc.cache on some boards. Do not use a specific position for spd.bin, but instead let cbfstool find the optimal placement. Change-Id: I496094d3c0de708813494095b7ac4be8addb4112 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5210 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-11rambi: add per-sku SPD supportAaron Durbin
There are currently 4 SKUs: 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz Add each of the 4 spds to the build, and use the proper parameters to MRC to use the in-memory SPD information. BUG=chrome-os-partner:22865 BRANCH=None TEST=Built. Noted 1024 bytes of SPD content. Change-Id: Ife96650f9b0032b6bd0d1bdd63b8970e29868365 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172280 Reviewed-on: http://review.coreboot.org/4872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-06MTRR: Mark all prefetchable resources as WRCOMB.Vladimir Serbinenko
Change-Id: I2ecfd9733b65b6160bc2232d22db7b16692a847f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5149 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-05mainboard/google: add initial rambi mainboard supportAaron Durbin
BUG=chrome-os-partner:23121 BRANCH=None TEST=None Change-Id: I283415be326e2d92e1e1bf7866954f17a7266edb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171940 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4865 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>