| Age | Commit message (Collapse) | Author |
|---|
|
Add data.vbt file and Kconfig to use it.
Extracted from google firmware genesis_13324.283.0
TEST=build genesis with FSP GOP display init
Change-Id: If836b214da1350111d7b7d1f24865199f814c521
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add data.vbt file and Kconfig to use it.
Extracted from google firmware ambassador_13324.283.0
TEST=build ambassador with FSP GOP display init.
Change-Id: I5c47700c5abe7d96112702d48a2b749f1784a494
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78032
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Without the PCH UART GPIOs set early, there is no serial console
output until ramstage. Add them to the early GPIOs for all puff
variants.
TEST=build/boot google/puff (wyvern) with serial console enabled,
verify console output starts in bootblock.
Change-Id: Ica0506b2b80e4fac0d3ca11b4cfdd128ce424b36
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78029
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With kernel 5.15, puff hangs during power idle tests because
the NIC does not enter ASPM L1.2. We add "enable_aspm_l1_2" in
devicetree for RTL8111H to enable ASPM L1.2.
BUG=b:268859220, b:279618219
TEST=emerge and run power.Idle
Change-Id: I129dfd79e8112191453be513b2e3a260429b3030
Signed-off-by: Alexis Savery <asavery@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77570
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A workaround was added for puff to assert/deassert the #ISOLATE pin
during suspend/resume to resolve the situation where the realtek
ethernet device cannot enter L1.2 mode when its ASPM is disabled.
The realtek driver has since been fixed and ASPM of realtek devices have
been enabled on kernel 5.10 and 5.15 and this original workaround
is now causing suspend/resume errors on kernel 5.15:
r8169 0000:01:00.0: Unable to change power state from D3cold to D0,
device inaccessible
Puff devices were originally shipped with kernel 4.19, and applying
this change to the firmware on a device running 4.19 causes
suspend/resume failures, basically reversing the problem. We are
upreving the puff kernel to 5.15 so we need this patch, but since
it is incompatible with 4.19 we will have to take that into
consideration when pushing new firmware and potentially will need
to backport the necessary fixes to 4.19.
BUG=b:268859220
TEST=suspend_stress_test -c 500 on wyvern
Change-Id: I5eead2d70cd9528b3ca3fadd11f98c0330601324
Signed-off-by: Alexis Savery <asavery@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77378
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
Add SOF chip driver entries for all variants, so that the correct audio
config is passed to the OS drivers.
TEST=build, boot Windows on wyvern variant, verify headphone output
and microphone functional under Windows using coolstar's SOF drivers.
Change-Id: I421c070eac321c2fc160b8f26868bcb1ec13001e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74815
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Change-Id: Ie75ce1eee3179a623da812a6b76c7ec457684177
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The parallel mp code picks up lapics at runtime, so remove it from all
devicetrees that use this codebase.
Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the
OS driver and ACPI thinking they own the GPIO. This can cause timing
problems because it's not clear which system should be controlling the
GPIO.
Previously, we flagged as an error any device which set the
'has_power_resource' flag but did not set 'disable_gpio_export_in_crs.'
There's no reason to require explicit disablement however, so drop the
superfluous 'disable' flag, and change the _CRS generation to check if
the GPIOs will be exported via the 'has_power_resource' flag instead.
BUG=b:265055477
TEST=build/boot skyrim, dump SSDT and verify touchscreen GPIOs only
listed under PRx, not under _CRS.
Change-Id: I837ae6c6fe4b8e1c4e10686406cba06bdb7759d2
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Remove the ACPI ALS device from the EC configuration for newer devices,
because some do not have light sensors, and those who do have their ALS
presented through the new EC sensor interface already.
Inspired from commit ("f13e2501525f ("UPSTREAM: mainboard/google/eve: Remove ACPI ALS device")
BUG=b:253967865
BRANCH=none
TEST=Boot a device and ensure that 'acpi-als' device is not present
in /sys/bus/iio/devices.
Change-Id: Ibcfa9e8c5a4679d557150998fd255789d3f8a272
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68493
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The hatch and puff baseboards have diverged enough to where it makes
more sense to split them into separate boards. Copy the mb/google/hatch
directory into a new dir 'puff' and strip out all boards and items
related to the hatch baseboard. Remove all puff-related items from the
original hatch directory. Clean up and alphabetize Kconfig selections.
Test: build and boot akemi hatch variant and wyvern puff variant.
Change-Id: I8c7350f3afcff3ddefc6fa14054a3f9257568cd3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62970
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
