summaryrefslogtreecommitdiff
path: root/src/mainboard/google/poppy
AgeCommit message (Collapse)Author
2018-08-15mb/google/poppy/variants/nocturne: remove dup'ed dptf_enableMatt Delco
This file contains two instances of "dptf_enable" = "1". This change removes the 2nd instance (it doesn't have an explicit comment like the 1st instance). The dptf devices still seem to be present even with this change, as expected. Change-Id: I890006644be9176ebaf555cc121c816e12f2b596 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-15mb/google/poppy/variants/nocturne: sx9310 to 400kbMatt Delco
The spec of the sx9310 says the I2C interface can handle standard (100kb/s) and fast mode (400kb/s). The current setting is using fast plus (1000kb/s) so this change is reducing the speed to fast mode. I've been using the sensors with this change for a few weeks now, though I also don't recall seeing an issue prior to this change. Change-Id: I337fc02c52565d6ec4d7bac1b3564f65238962dc Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-15Revert "mb/google/poppy/variants/atlas: enable camera power and release reset"Caveh Jalali
This reverts commit 1fdb76945a9d06bbff37dee9da69e13a86c933f4. Camera power is now handled by ACPI rules - no need to force the GPIOs on by default. BUG=b:80106316,b:111141128 Change-Id: Ifefec320884989f106a4b09c956d3a3279a1491a Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28072 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Ping-chung Chen <ping-chung.chen@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15mb/google/atlas: Add DISPLAY_DCR_EN GPIO pinCaveh Jalali
This defines new GPIO pin for controlling the display panel CABC function. The default value is high (enabled). BUG=b:112154569 Change-Id: I29083ab18e37f929a55b450b143463c67fe0abea Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28070 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15mb/google/atlas: Update DPTF sensor namesCaveh Jalali
This updates the DPTF sensor names to reflect the sensor locations on the board. BUG=b:75454415 TEST=verified new strings show up in /sys/devices/LNXSYSTM:00/LNXSYBUS:00/INT3400:00/*/description Change-Id: Ibffe6cb361de212ca03e75deaa8c454546d267a5 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28069 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-14mb/google/poppy/variants/nocturne: Update PL1/PL2 for AMLRoy Mingi Park
This patch updates Power Limit (PL) for AML. - PL1 as 5W TDP as POR - PL2 as 18W TDP as POR BUG=None BRANCH=None TEST=Build coreboot for Nocturne board and check default PL1/PL2 TDP. cat /sys/class/powercap/intel-rapl/intel-rapl\:0/constraint_0_power 5000000 (5W TDP) cat /sys/class/powercap/intel-rapl/intel-rapl\:0/constraint_1_power 18000000 (18W TDP) Change-Id: Icb02a8a7c5fcd5e6aee45f14eba540a6b3ed3d67 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/27427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-14mb/google/poppy/variant/nami: Add TSR2 on DPTFT.H. Lin
Add TSR2 DART/DTRT package BUG=b:110451144 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test image with dptf.dv Change-Id: I3328e17328415f5ebdcf84263e5456e11e55f769 Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-08-13mb/google/poppy/variants/nocturne: remove icc_max overridesNick Vaccaro
Remove icc_max overrides to allow SoC code to set proper icc_max based on CPU SKU. BUG=b:78122599 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage', flash to nocturne, boot to kernel and verify device doesn't hang after a few minutes. Change-Id: I37c44e2428b802d754f2b12b8a57601d257e6582 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27996 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/poppy/variant/nocturne: update PL2 based on CPU skuNick Vaccaro
This patch adds a function to overwrite PL2 setting based on CPU sku. From doc #594883, PL2 is 18W for AML-Y. BUG=b:110890675 BRANCH=None TEST=emerge-nocturne coreboot chromeos-bootimage & test with AML-Y and KBL-Y skus. Change-Id: Idfdc0c2434fdef56a7c25df05e640837a5096973 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27997 Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/poppy/variant/atlas: Update PL2 based on CPU skuGaggery Tsai
This patch adds a function to overwrite PL2 setting based on CPU sku. From doc #594883, PL2 is 18W for AML-Y. BUG=b:110890675 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage & test with AML-Y and KBL-Y skus. Change-Id: I468befcd2c4ad6c2bb9ae91b323a43f87ff65a26 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27765 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09mb/google/poppy/variants/atlas: Do not override icc_maxCaveh Jalali
Skylake SoC code now sets the icc_max based on the CPU SKU, so we should not hard-code it in the device tree. BUG=b:110890675 BRANCH=None TEST=boots on atlas Change-Id: I7eb3499b7bea9ab2c49e1f299e2dbb688c8d1c33 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
2018-08-07mb/google/poppy/variants/nautilus: Set CABC_EN to GPO high before EDP power onSeunghwan Kim
If GPP_E22(CABC_EN) remained floating GPI(SoC default) at V3.3_DX_EDP on, it may cause damage on the GPIO pad. To prevent, we would set this pad to GPO on romstage before EDP power on. Since we need to cover all systems in market, I put it into romstage instead of early_gpio_table. BUG=b:111860510 BRANCH=poppy TEST=Verified CABC_EN is set to GPO high 5ms before EDP power on Change-Id: I34e2fe86329a88eb05e0ea3c6beac6a64754b41e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-07mb/google/poppy: Add variant callback for romstage GPIO configurationFurquan Shaikh
This change adds variant callback to get GPIO configuration table in romstage and configures these GPIOs before memory training is performed. BUG=b:111860510 BRANCH=poppy Change-Id: I1eb51356fb3f4c0f4ff29b22dbcde6dbece303ad Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07mb/google/poppy/variants/nautilus: Add SKU info to SMBIOSFurquan Shaikh
This change provides implementation of smbios_mainboard_sku() to add proper "skuX" string to SMBIOS table 1. BUG=b:112163362 TEST=Verified "dmidecode -t 1" reports skuX correctly. Change-Id: I7e42d2c80d791ea7170d066d2eeaa0c6811eb9c9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06mb/google/poppy/variants/rammus: add rammus devicetree.cbZhuohao Lee
Use the default value for Iccmax which is specified in vr_config.c. The AcLoadline and DcLoadline keep the poppy value. Besides, the USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT and the others on the daughterboard are set to USB2_PORT_LONG. Those setting need to be fine tuned later. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: Icabfac04c94b3d480872c243d811509e274ef122 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add gpio settingZhuohao Lee
The gpio setting is based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I20fc081d372b8686f6128a7e85276f9c6798b199 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add memory configurationZhuohao Lee
Add memory configuration based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I45efdc7893b5bcbca0de6e932e1452cc1a2ff028 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add audio, mic and codec configurationZhuohao Lee
Rammus uses DA7219 Headset, Maxim MAX98927 Smart Amps and 4 channel dmic BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: If21a3870ee4b000a776d2f3e025fb43ef2fe48c7 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: change build directory to rammusZhuohao Lee
Move the build board directory from poppy to rammus. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I3a9fc2bbfe7261661f0c5c073baff0ff1434d09f Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-03mb/google/poppy/variants/atlas: Apply correct AC/DC loadlinesGaggery Tsai
This patch applies correct AC/DC loadline settings for Atlas from VRTT report. BUG=b:111419622 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage and use DbC to check the AC/DC loadline settgins. Change-Id: I6e85b885a6d3a1db9a980d12f3cfc036a771422a Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27788 Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02mb/google/poppy/variants/nami: Tune Fan speedSumeet Pawnikar
Tuning of fan speed for different temperature values. Earlier while running few benchmarks, fan was always getting on and starting at higher speed. With this change fan will start with lower speed and slowly speed gets increased if temperature continue going high. Thermal team provided these data after fine tuning of fan speed. BUG=None. TEST=Verified on Nami running with different benchmarks and observed fan speed. Change-Id: Ic3be9e44deef9570200c71807a2ee712d9f20876 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27683 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02mb/google/poppy/variants/nami: Enable mbox command for ISL VR c-state issueShelley Chen
There is a potential IMVP8 issue for KBL that affects Intersil VRs Nami is using one of the affected parts. The fix is to use an updated microcode and also send a mailbox box command from FSP. BUG=b:112081534 BRANCH=None TEST=Build and boot Nami Verify that suspend/resume and consecutive reboots are working Change-Id: I6ec18a4c3fae6a66cf8a95685d91a8ba51e2697c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/27780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-01mb/google/poppy/variant/nami: Overwrite AC/DC loadlinesGaggery Tsai
This patch adds a function to overwrite AC/DC loadlines for differnt projects. BUG=b:111761175 BRANCH=None TEST=emerge-nami coreboot chromeos-bootimage and use DCI to dump AC/DC loadline settings. Tested on Vayne and Akali. Change-Id: Id0068c5334c257b9f4c32b6088becbfe8391a864 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-30mb/google/poppy/variants/atlas: Add new Nanya memory optionTim Chen
- add Nanya NT6CL256T32CM-H1 to memory strapping table BUG=b:111906760 BRANCH=none TEST=none Change-Id: I1432b9ab84f01a7fee1bc562aa40c714ddbf639e Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Caveh Jalali <caveh@google.com>
2018-07-30mainboard/google/nocturne: simplify camera power referencesMatt Delco
This change primarily moves the PowerResource up to a more common scope so that the _PRx references are simpler. The ^ scope modifier isn't well supported everywhere amongst OSes and drivers. Windows 10 will BSOD early during boot with ACPI_BIOS_ERROR (code 0x6, which means it could not find the object referenced by a _PRx) with the way things are currently laid out). I've also not seen a firmware outside of coreboot that tries to reference count _ON and _OFF. Isn't it up to the OS to deference count, and whatever it tells ACPI is what should happen (i.e., on means on and off means off)? Some of the _UIDs are also duplicated. This change makes them unique. A few cosmetic changes are made so that diffing cam0.asl against cam1.asl has fewer extraneous differences. Change-Id: I9c9f6c712b075450539d5b84ac5bb221b3cbb57e Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2018-07-30mb/google/poppy/variants/nocturne: enable FPMCU powerNick Vaccaro
Enable power to FPMCU by default on power-on and deassert the PCH_FPMCU_RST_ODL reset line. BUG=b:111880258 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage', flash and boot nocturne to kernel, login and execute "powerd_dbus_suspend" at kernel prompt, wait a few seconds, press power button to wake, then execute "cat /var/log/cros_fp.log | grep 'Reset cause'" and assure search comes up empty. Change-Id: I7f8419dd58f79816f8061d0da4a0d3984c814289 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27658 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30mb/google/poppy/variants/nocturne: enable ec host event wakeNick Vaccaro
Enable nocturne to wake from lid attach/detach events. BUG=b:111803637 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage", verify EC has commit a5abbbb4eb9b15a72624dddbfd727d0b324c3f36, and verify nocturne wakes from suspend on a lid attach/detach event. Change-Id: I22b957d741426ca8b49d1819cf39c940f55198eb Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27649 Reviewed-by: Aseda Aboagye <aaboagye@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30mb/google/nautilus: Remove obsolete fieldsAlan Chiang
Some fields were only required during early stages of IPU3. Remove some fields that aren't used for the current version of IPU3. BUG:None TEST=Launch camera app and check if it works properly. Change-Id: I72bcba13cc353a1b16fedeb7543fbbac432fbf5d Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Reviewed-on: https://review.coreboot.org/27617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-30mb/google/poppy/variants/nautilus: Set GPP_D21 to high as defaultSeunghwan Kim
Currently, default GPP_D21(LTE3_BODY_SAR) output level is low, it means LTE tx power is backoff mode as default. We would set GPP_D21 to high to change LTE tx power to normal mode as default. BUG=None BRANCH=poppy TEST=Verified default LTE tx power mode is normal mode as default Change-Id: I62e77196c2116924f437f61368f0ae7efd0e144c Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27661 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30mb/google/poppy/variants/nami: Fix fan is always ONJohn Su
Add the new setting for fan performance state. BUG=b:111860513, b:11865138 TEST=Fan do not run below trip point Change-Id: I894460b8b418217e2477608094c37018437cbb78 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-07-26nocturne: configure VR per Intel recommendationPratik Prajapati
These values are Intel recommended. IccMax = 28A DC and AC LL = 4mOhms Pl2 = 18w BUG=b:79666828 BRANCH=none TEST=Enabled p-states with patch Change-Id:I82d1516998cc26b789faa5d4e897feb06dc06020 and then "emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/27175 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26mb/google/poppy/variants/nocturne: enable p-statesPratik Prajapati
This patch enables p-states for nocturne which was disabled by commit de31587a (mb/google/poppy/variants/nocturne: disable p-states). p-states feature was disabled as a temporary work-around as system was getting hung while booting up. Now with IMVP7 firmwware turning and hardware rework the issue is not seen, so its safe to enable p-states. BUG=b:79666828 BRANCH=none TEST=cherry picked Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d patch and then "emerge-nocturne depthcharge coreboot chromeos-bootimage" , flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I82d1516998cc26b789faa5d4e897feb06dc06020 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/27257 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25mb/google/x86-boards: Get rid of power button device in corebootFurquan Shaikh
As per the ACPI specification, there are two types of power button devices: 1. Fixed hardware power button 2. Generic hardware power button Fixed hardware power button is added by the OSPM if POWER_BUTTON flag is not set in FADT by the BIOS. This device has its programming model in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this power button device by default if the power button FADT flag is not set. On the other hand, generic hardware power button can be used by platforms if fixed register space cannot be used for the power button device. In order to support this, power button device object with HID PNP0C0C is expected to be added to ACPI tables. Additionally, POWER_BUTTON flag should be set to indicate the presence of control method for power button. Chrome EC mainboards implemented the generic hardware power button in a broken manner i.e. power button object with HID PNP0C0C is added to ACPI however none of the boards set POWER_BUTTON flag in FADT. This results in Linux kernel adding both fixed hardware power button as well as generic hardware power button to the list of devices present on the system. Though this is mostly harmless, it is logically incorrect and can confuse any userspace utilities scanning the ACPI devices. This change gets rid of the generic hardware power button from all google mainboards and relies completely on the fixed hardware power button. BUG=b:110913245 TEST=Verified that fixed hardware power button still works correctly on nautilus. Change-Id: I733e69affc82ed77aa79c5eca6654aaa531476ca Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-24mb/google/poppy/variant/nami: Add custom VBT for panel T8/T10T.H. Lin
Fix VBT SSF setting for panel T8/T10 as Akali/Akali360 panel has T8 minimum 33.3 ms and T10 minimum of 100 ms. BUG=b:111530392 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test & measure T8/T10 waveform Change-Id: I642a1aa0b2d13b33e6113f94e73dfc77834766d4 Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-23mb/google/poppy/variants/rammus: Add support for rammus boardZhuohao Lee
This change adds variant rammus derived from baseboard poppy. The setting is copied from the poppy and will be modified later BUG=b:111579386 BRANCH=master TEST=emerge-rammus coreboot Change-Id: I169c225e28183a7a93f1142a3bf87a60b26ce9ca Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-22mb/google/nautilus: Enable camera module NVMAlan Chiang
Enable DW9807 NVM support by adding required ACPI code BUG:b:110815821 TEST=On Nautilus board, execute "cat /sys/bus/i2c/devices/i2c-INT3499:00/eeprom" in the terminal and see if there is any data to be dumped. Change-Id: Ib83fa1a522402a59566e3f55fa5c1af4490266e4 Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Reviewed-on: https://review.coreboot.org/27508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tomasz Figa <tfiga@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2018-07-22mb/google/poppy/variants/nautilus: Add internal pull-up for USB2_OC2#Seunghwan Kim
Nautilus-WiFi board doesn't have external pull-up on USB2_OC2# route,then abnormal over-current is asserted on USB type-A port. It causes USB type-A port to be blocked, so we need this internal pull-up. BUG=b:111578984 BRANCH=poppy TEST=Verified over-current not triggered abnormally on basic sku board Change-Id: I159f686cef9c8d254f390d7f1dff8011f43fc066 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-21nocturne: enable GEO SARPratik Prajapati
Enable the GEO SAR feature for nocturne. OxM programs wifi_sar VPD key in factory. coreboot reads the VPD and creates the ACPI table as per the WGDS spec. BUG=b:65155728 BRANCH=none TEST= Set the wifi_sar VPD with below command (values are junk for test purpose only, actual values would be set be OxM) sudo vpd -f <coreboot.rom> -s wifi_sar=30313233343536373839303132333435363738393030313 24142433435364445463031324142433400364445463031323343444546303132333435 Flash the <coreboot.rom> and boot to kernel. Get ACPI table and WGDS would get created with VPD values passed in. Change-Id: I32ad591f15fdb34704c8d98d98646dfa2d8882ff Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/27501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-07-20mb/google/poppy/variants/nocturne: set nvme to use clk src 3Nick Vaccaro
Latest nocturne architecture uses clk src 3 for nvme. BUG=b:111514174 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage" and verify nvme nocturne devices are able to recognize the nvme controller. Change-Id: I5b2bf012ba88568cb4b0bb3918a3a2c6770ff4c1 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27536 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17mb/google/atlas: Add MIPI camera ASL filesChen, Ping-chung
Atlas has one sensor, create a single endpoint to CIO2. Create power resource for enabling/disabling camera. BUG=b:111141128 Branch=None TEST=Testing on Atlas board Change-Id: Ide0e923bbc34f869dd0227c0a29977645bc5d58d Signed-off-by: Ping-Chung Chen <ping-chung.chen@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/27350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2018-07-13mb/google/poppy/variants/nami: Use Pantheon VBTIvy Jian
Add new Pantheon sku-id for loading vbt-pantheon.bin BUG=b:78663963 BRANCH=firmware-nami-10775.B TEST=Boots to OS and display comes up. Check the board specific vbt binary loaded. Change-Id: I1ee156372754ac0e77caae5959a9ca9884de95f4 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27432 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-12mainboard/google/nocturne: Update GPIO_FCAM_PWR_ENRicky Liang
The FCAM_PWR_EN gpio should be GPP_B4 according to the latest board schematics. Change-Id: Id926bd224b3392d8a61b6d8ae0509053afaa5b9e Signed-off-by: Ricky Liang <jcliang@chromium.org> Reviewed-on: https://review.coreboot.org/27433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tomasz Figa <tfiga@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-07-11skylake: Remove "IshEnable"li feng
Remove "IshEnable" from soc_intel_skylake_config since it's not used anymore. Enable/disable ISH by checking if ISH device is turned on or not. Refer to https://review.coreboot.org/#/c/coreboot/+/26485/. BUG=b:79244403 BRANCH=none TEST=Built. Change-Id: I4d2889af118659852431c87cb516fd19b577efc5 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-11mainboard/google/poppy/variants/atlas: config ISH in mainboard sideli feng
To enable ISH device on atlas board, change "device pci 13.0 off end" to "device pci 13.0 on end" in file mainboard/google/poppy/variants/atlas/devicetree.cb. "IshEnable" is not needed. Config atlas board specific ISH setting in devicetree.cb. Dynamically load gpio setting for ISH enabled/disabled cases. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I8269a85cd2ab7917bfc0e7d63d988e0e678d0bf2 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06mb/google/poppy/variants/nocturne: fix FPMCU IRQ sensitivityVincent Palatin
the FPMCU_INT_L on GPP_C11 is active low but the kernel irq handler is defined as IRQF_TRIGGER_LOW, so do not invert it twice. BRANCH=poppy BUG=b:78613978 TEST=On Nocturne, the 'cros_ec' IRQ count in /proc/interrupts does not increment wildly. Change-Id: I56c13c797b133dd22669a2299bcd16ef14eed335 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/27221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06google: Use proper ACPI ID for Semtech chips: STHGwendal Grignou
Change-Id: I85cd567a923cccd2504f351aae276b5f0d9db4de Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Delco <delco@google.com> Reviewed-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-03mb/google/*: Remove selection of DRIVERS_PS2_KEYBOARDFurquan Shaikh
Until now, chromeec was doing keyboard initialization for the boards that have DRIVERS_PS2_KEYBOARD selected. However, coreboot does not leave the keyboard controller in a default reset state. This could result in payloads or OS failing to probe the controller as there could be stale data buffered in the controller during the handoff. Since the boards using chromeec already perform keyboard initialization in payload, there is no need to initialize the keyboard in coreboot too. This change gets rid of DRIVERS_PS2_KEYBOARD selection from all google mainboards using chromeec. BUG=b:110024487 TEST=Keyboard works fine after booting to OS even if user hits keys during BIOS to OS handoff. Change-Id: I1f49b060eb005c0f2b86f9d68d6758954eeb3cf0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27291 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mainboard/google/nocturne: Enable IPU3Lijian Zhao
Enable Image Processing Unit and CIO2 device that constitute IPU3. BUG=None TEST=Build and boot up into Nocturne platform and check with lspci. Change-Id: Ic2edf5ec7bde5c55ce1b13cf7b680094a9fffc6a Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Set camera power sequenceLijian Zhao
To make image sensor working, the intended power sequence need to applied. BUG=NONE TEST=NONE Change-Id: I4833c0e303174b297c1d193495e08e55d294a717 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Enable camera sensorsLijian Zhao
Sensors and CSI2 receiver configuration for Nocturne platform. IMX355 module has VCM, NVM and is on the second port of receiver. IMX319 module has NVM and is on the first port of receiver. Change-Id: I37c877df8062d5c79e25ed27775ab58e977555db Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/26283 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02nocturne: Do not set 4 LSB of SX9310 CRTL0Gwendal Grignou
These bits start the acquisition process. They should only be set by the driver. BUG=b:74363445 TEST=compile Change-Id: I9e10f5570ac82124f7f4b5cc7aaad27da0c578be Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02nocturne: Fix casing for register definitionGwendal Grignou
Use lower case for hex values. BUG=b:74363445 TEST=compile Change-Id: I24afea58b1a791fac3c87ad397a696f7f6e0d127 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mb/google/poppy/variants/nami: Perform PL2 setting for sonaJohn Su
According to sona thermal table, PL2 need to check cpu id. And then set PL2 value. BUG=b:110867809 TEST=The thermal team verify OK Change-Id: I5759fb3c685e3d4eef1be054541f950843d19874 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-06-29mb/google/poppy: Fix bytes 145-146 in nayna_dimm_NT6CL256T32CM SPDT.H. Lin
nayna/NT6CL256T32CM-H1 file change byte 145/146 to be"20" for JEDEC spec BUG=b:79443146,b:109708239 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test on R69.10825 with mosys Change-Id: Iadc820111f0aed34e5b46d7e23dff44cb5bb811d Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27275 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28nocturne: Fix uid and desc for sx9310Enrico Granata
This commit changes the uid and desc fields for the sx9310 entries in the devicetree to be unique, and correctly identify the position of the respective sensors. Change-Id: I501df7d3349fdebc9673c9815f5b1b2458abac6e Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
2018-06-28mb/google/poppy/variants/nautilus: Use GPP_B20 to determine SKUSeunghwan Kim
We would use GPP_B20 instead of board id to determine nautilus SKU. BUG=b:80052672 BRANCH=poppy TEST=Verified the new coreboot could determine SKU correctly Change-Id: I1978b544eef7a184a3da191306ee32d862fa8c36 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27220 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mb/google/poppy/variants/nocturne: Update TSR sensor infoSumeet Pawnikar
This patch updates TSR sensor info with appropriate names. Also, updates Charger effect with correct TSR sensor mapping. BUG=None BRANCH=None TEST=Build coreboot for Nocturne board. Change-Id: Ia3bbc78f8d823e88a91265e0d55c5ac2a4ea31a9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-25mb/google/poppy/variants/nami: Prevent leakage with touchscreen on PantheonCrystal Lin
We found GPP_C3 keeps high when system in S0ix mode. It caused 1.8V leakage. To fix this problem, add GPP_C3 into config for Pantheon Synaptics touchscreen. BUG=b:78436458 BRANCH=None TEST=Let DUT in S0ix mode and check GPP_C3 is normal. Change-Id: Idb2dab93178af1dae54265e49522b473b69a35af Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27177 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/nami: Enable xDCIShelley Chen
This change enables xDCI controller on nami. BUG=b:110443736 BRANCH=None TEST=None Change-Id: Ieb63e0d65ac1a142c151a3f93afe306b80a5d99a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/27181 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: Add two new Samsung memory optionsCaveh Jalali
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table BUG=b:110498646 BRANCH=none TEST=none Change-Id: Iddacdf1e1d0e2bae0c6168c86e54f5f602cd9d19 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27184 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: add GPIO for bluetooth enableCaveh Jalali
This configures a GPIO pin for enabling/disabling bluetooth on the next version of the atlas board. The default is for bluetooth to be enabled at this point. BUG=b:110614620,b:110613353 BRANCH=none TEST=none Change-Id: I4ba940e89b1dc03548b7ab44b8f84dc9a3097acb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27185 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22mb/google/poppy/variants/nami: Fix non-working thermal sensor QT2 PSVJohn Su
Modify DPTF TRT parameters to solve thermal sensor QT2 PSV problem. BUG=b:109941652 TEST=The thermal team verify OK Change-Id: Id9d39d8282712a0341fea10f74c0e40bb1ac9d7c Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22mb/google/poppy/variants/nocturne: Hook up the SX9310 proximity sensor.Enrico Granata
Change-Id: I7358ee34df873098a86d692cc8a909b0ec5023a8 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nocturne: add two new memory optionsNick Vaccaro
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table - add SPD files for K4E6E304EC-EGCF and K4EBE304EC-EGCF BUG=b:110277021 BRANCH=none TEST=none Change-Id: If1322311bd91842d6d32725822d91fd6d9e8077c Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nocturne: Update Slave Addresses of Max98373 Amp'sSathyanarayana Nujella
When played Left Only Audio and Right Only Audio, we observed that Audio got swapped. Left Data played on Right Speaker and Viceversa. This patch fixes the above issue. BUG=b:73635449 TEST=Play Left only & Right only Audio and cross check Audio. Change-Id: Ie9c417ad0634a76fc8a4126ee75886603f1b3da0 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/27167 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nocturne: disable p-statesNick Vaccaro
Set register speed_shift_enable=0 in devicetree to disable p-states in coreboot as a temporary workaround for an SoC hang. BUG=b:79666828 BRANCH=none TEST="emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I71ed4c80c109b28ffa85d48338ce3a62396d272e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/atlas: enable camera power and release resetCaveh Jalali
This is a temporary hack to test camera presence before we have full camera support implemented. Basically, we can now probe the camera over i2c to verify that it's connected and the camera LED turns on. BUG=b:80106316 BRANCH=none TEST=camera LED comes on and camera can be probed over i2c. Change-Id: Ibaabf6c6f6a1dabaddd2fc47c820e090ca5984a5 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27128 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/atlas: enable touchscreenCaveh Jalali
This adds the necessary config to enable touchscreen sensor in linux. BUG=b:110286344,b:110286345 BRANCH=none TEST=verified touch functionality using eval board Change-Id: I21efafda3f2ae1dcea19e44f8d66f6dfaac1bb12 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/atlas: support i2c-hid trackpadCaveh Jalali
We plan to use i2c-hid compatible trackpads on atlas, so this switches the trackpad config to i2c-hid. BUG=b:80662079 BRANCH=none TEST=used trackpad to verify motion tracking Change-Id: I2702e61a6aa96250c0c09ea4bd15d0c671eedadc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27126 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Add SAR sensor device into devicetree.cbSeunghwan Kim
This change defines SAR sensor device into devicetree.cb. Since only LTE sku has SAR sensor, we will use GPP_B20 as a device_present_gpio. BUG=None BRANCH=poppy TEST=Verified SAR sensor device is loaded by driver in Chrome OS Change-Id: Ib4969e4b82d18b1b1a599de8226c2d7d4bda7915 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27149 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Clear GPP_D0 when entering S5Seunghwan Kim
Nautilus 2nd SKU has a leakage voltage at GPP_D0 in S5 state. We need to set this to LOW when entering S5 for clear the leakage. BUG=None BRANCH=poppy TEST=Verified the leakage is gone after update coreboot Change-Id: I054e707b2bc2e63d6f99cd2fd8a57be20615f111 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nautilus: Configure for 2nd nautilus SKUSeunghwan Kim
For supporting new SKU, we need to override GPIO table and device configuration. The board ID of 2nd SKU of nautilus is started from 9, so we would determine SKU with it. BUG=b:80052672 BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: I7242f23f47010664cc29ea86a126e63c9dd62ccd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27147 Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-18mb/google/poppy/variants/nautilus: Correct USB OC pin configurationSeunghwan Kim
Due to schematic, we need to correct USB OC pin configuration. - OC0 for Type-C Port 1 - OC1 for Type-C Port 0 - OC2 for Type-A Port - OC3 to NC BUG=NONE BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: Ic71baef646926cc6aadcc5dda7cb14f00e8d3687 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-15mb/google/poppy/variants/nami: Update DPTF table from version 1.5John Su
Update dptf.asl and TCC parameters from tuning of the thermal team. BUG=b:72974136 TEST=Match the result from DPTF UI Change-Id: Ic0ffc169ad3939cacb46824ed23999c61a23d2c4 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27086 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14mb/google/poppy/variants/nocturne: config GPP_E2 for BT_DISABLE_LNick Vaccaro
GPP_E2 will be used as a BT reset line, so configure GPP_E2 as an output and initialize it high (high = out of reset). BUG=b:80089559 BRANCH=none TEST=none Change-Id: If45ef3a592c389a0b80298c59eea849d07d9671e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-14mb/google/poppy/variants/nocturne: config GPP_B4 for FCAM_PWR_ENNick Vaccaro
FCAM_PWR_EN signal is changing to connect to GPP_B4 instead of GPP_D8 as it needs a 3.3v gpio to provide enough power to also directly power the camera LED. BUG=b:79667559,b:78122599 BRANCH=none TEST=none Change-Id: Ie875ced45dfa2aa7069851004edde8f77329df34 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-11mb/google/poppy/variants/nami: Add EC_ENABLE_TBMC_DEVICEShelley Chen
Add tablet motion control config to nami devices. BUG=None BRANCH=None TEST=run evtest make sure tablet switch value is 1 in tablet mode and 0 when not in tablet mode Change-Id: Ie1480934dc003d9b467883e001ed89f9a3694d10 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26970 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11mb/google/poppy/variants/nocturne: enable nvmeNick Vaccaro
- configure GPP_B7 (PCIE_NVME_CLKREQ_ODL) for NF1 - enable root port 9 - add nvme register settings to devicetree BUG=b:78122599 BRANCH=chromeos-2016.05 TEST='emerge-nocturne depthcharge coreboot chromeos-bootimage', boot to kernel, and verify /dev/nvme* entries exist. CQ-DEPEND=CL:1090070 Change-Id: I0070d33b1ed09bd1f51a680d92ddb7e2bcb1ebc2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-07mb/google/poppy: Select right TPM interfaceNaresh G Solanki
TPM over SPI/I2C config selection got changed in https://review.coreboot.org/c/coreboot/+/24903 so this CL is fixing the same. BUG=None BRANCH=None TEST=Build for Soraka & make sure that TPM is probed over I2C interface rather than SPI. Change-Id: I077e4dc03520e26eb9f6404a7eb1edd99925de77 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26890 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07mb/google/poppy/variants/nami: Disable rear camera/DMIC for SonaAmanda Huang
Since there are two cameras on Nami and only one camera on Sona. We need to disable rear camera/DMIC on all Sona sku. BUG=b:109710674 BRANCH=master TEST=Verify if only front camera/DMIC shown on Sona Change-Id: Id84ee22c9ffc15db78be3bbad148af5cd7dc866e Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07mb/google/poppy/variants/nami: Disable rear camera/DMIC for PantheonAmanda Huang
Since there are two cameras on Nami and only one camera on Pantheon. We need to disable rear camera/DMIC on all Pantheon sku. BUG=b:109720689 BRANCH=master TEST=Verify if only front camera/DMIC shown on Pantheon Change-Id: Ibe48a945dc57f2c05344479253040ad1945d92fd Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-06mb/google/poppy/variants/atlas: update HP IRQ pin's pad configSathyanarayana Nujella
Issue observed on the board is: too many jack interrupts. cat /proc/interrupts | grep da7219 58: 84292 15709 0 0 IO-APIC 58-fasteoi da7219-aad Updated pad configuration for Jack IRQ pin to fix the issue. BUG=b:109655907 TEST=Jack insertion & removal detection is working. Change-Id: I41ef9d40325677b01ca94ec3215e7feded76dcc3 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06mb/google/poppy/variants/nami: Add delay to enable_gpio during Elan power onShelley Chen
During measurement of signals during Elan touchscreen power on, saw that the enable_gpio delay was not sufficient as there is a +1.5 ms delay during power on. Adding more delay to take this into account. BUG=b:78311818 BRANCH=None TEST=probe power on signals to ensure meet timing requirements Change-Id: Id661a202188a97aef97514ebecd0be6fc022d21e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06mb/google/poppy/variants/nami: Fix Elan touchscreen power off sequenceShelley Chen
Power off does not seem to use the ACPI _OFF function, but rather the smihandler. Creating variant_smi_sleep function for nami to handle the power off sequence during reboot/power off. BUG=b:78311818 BRANCH=None TEST=Run "poweroff" command from AP console with SMI_DEBUG enabled Make sure delays are consistent with spec Change-Id: Ifeea545fe268be249793b3e508c51f5e4c1a3460 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05mb/google/poppy/variants/nami: Disable rear camera/DMIC for vayne skuid 3A67Van Chen
Since Vayne added one more skuid 3A67, we need to disable rear camera/DMIC for vayne skuid 3A67. BUG=b:75073617 BRANCH=master TEST=Verify if only front camera/DMIC shown on Vayne Change-Id: I9131b4c41bf189829be4e7e6bfaf4a96765cfa15 Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26855 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05soc/intel/skylake: Add option to skip coreboot MP initSubrata Banik
This patch provides option for mainboard to skip coreboot MP initialization if required based on use_fsp_mp_init. Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init * 1 = Make use of FSP MP Init Default coreboot does MP initialization. Change-Id: I8de24e662963f4600209ad1b110dc950ecfb3a27 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-03mb/google/poppy/variants/nami: Load vayne VBT binaryIvy Jian
Load vbt-vayne.bin by reading sku-id. BUG=b:80509366 TEST=Boots to OS and display comes up. Check the board specific vbt binary loaded. Change-Id: Ia26ea4a9b7679aeb9d98f19ffaa1b686af828339 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-01mb/google/nautilus: Add "rotation" controljimlai
The driver only supports streaming images flipped horizontally and vertically. In order to ensure that all current users will be fine if or when support for upright streaming is added, require the presence of the "rotation" control now. BUG=None BRANCH=None TEST=Verified the MIPI and USB camera function on DUT board Change-Id: I7e3abdea9071da1a089c7165f6bb609428090792 Signed-off-by: Lai, Jim <jim.lai@intel.com> Reviewed-on: https://review.coreboot.org/26727 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31mb/google/poppy/variants/nocturne: configure the FPMCU interfaceVincent Palatin
The FPMCU is using the standard cros-ec-spi interface on GSPI1. Configure the GPIOs controlling the MCU too. We need to be able to wake from S3 on the MCU interrupt, re-configure GPE0 DW0 to point to GPP_C bank. BRANCH=poppy BUG=b:79666174 TEST=exercise the cros_ec interface, e.g. 'ectool --name=cros_fp version', verify the MKBP events by doing 'ectool --name=cros_fp fpmode fingerup' then 'ectool --name=cros_fp waitevent 5 10000', toggle the other GPIOs with the flash_fp_mcu script. Change-Id: Ib417dcf84cda8e354060785cd16a7b6b812148d5 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/26684 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/poppy/variants/nami: Perform PL2 setting in variant_devtree_udpateFurquan Shaikh
This change moves PL2 override to variant_devtree_update for two reasons: 1. This function was added to basically override devtree settings in variant specific code. So, it would be a good idea to perform all the overrides in a single place. 2. Adding a device for performing nami_enable would require changes to devicetree and special handling for calling this device enable. Thus, nami_enable was never getting called. BUG=b:80148703 Change-Id: Ifa24a7b6e99cad2368b3d656a757f26297373121 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25mb/google/poppy/variants/nami: Use GPP_E4 for BT_OFF#Frank Wu
The BT W_DISABLE2# pin is connected to GPP_E4 in the latest schematic. Update GPP_E4 as GPO and set 1 as default. BUG=b:79993692, b:72007632 BRANCH=None TEST=Enable/disable BT/WLAN by following command. Enable: localhost ~ # iotools mmio_write32 0xfdae0590 0x40000201 localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000201 Disable: localhost ~ # iotools mmio_write32 0xfdae0590 0x40000200 localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000200 Change-Id: I9ef1a5314652ab29172d246abd58ee4e1a8a6299 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26502 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24mb/google/poppy: Enable SAR config on NamiAmanda Huang
This change enables SAR config on Nami with CHROMEOS option. BUG=b:75077304 BRANCH=master Change-Id: I8217333db2db6c0fd5e1c144dedd3692b1e1e6a3 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: enable MKBPNick Vaccaro
BUG=b:79617938 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage", flash nocturne, boot to kernel, run evtest and verify that cros-ec-buttons is present and functional. Change-Id: Id710782e1f4e18eaac2a90c7c0f91af5223dbce3 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: enable I2C #5 busNick Vaccaro
Enable I2C #5 for rear camera and SAR. BUG=b:79784124 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage' and verify i2c bus #5 is detected. Change-Id: Ic5b754fb97231aeab0278d71f8ced9343c30feda Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: deassert audio amp resetNick Vaccaro
Drive SPKR_RST_L (GPP_A19) high at boot to take audio amps out of reset. BUG=b:78122599 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage", boot to kernel, and verify sound works via "aplay /dev/random" Change-Id: Ia49931f2dc7802edc8a46114b081e4a96eeee604 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: add touchscreen register infoNick Vaccaro
- add ACPI register information for touchscreen WCOM digitizer BUG=b:78122599 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage" and verify touchscreen on Nocturne board works. Change-Id: I9790a930e8ed2748d568ce58c931ce34b3e22007 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-18mb/google/poppy/variants/nami: Fix SoC I2C CLK is abnormalChris Zhou
The I2C CLKs of SoC should be 400kHz, but waveform show 460kHz to 470kHz. Add I2C parameters to adjust I2C CLKs which 5% lower than 400kHz. BUG=b:78819970 TEST=The I2C CLKs are 5% lower than 400kHz. Change-Id: I2c3012b5b59c089801cda8fd7b0c433aad9df36d Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26282 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-18mb/google/poppy/variants/nocturne: enable pogo pin USB portNick Vaccaro
BUG=b:78122599 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage" and verify pogo pin port is working. Change-Id: Ide7359366821f33c4746284e65cacdf4e240931d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 05:48:27 +0000