summaryrefslogtreecommitdiff
path: root/src/mainboard/google/poppy
AgeCommit message (Collapse)Author
2018-07-02mainboard/google/nocturne: Enable IPU3Lijian Zhao
Enable Image Processing Unit and CIO2 device that constitute IPU3. BUG=None TEST=Build and boot up into Nocturne platform and check with lspci. Change-Id: Ic2edf5ec7bde5c55ce1b13cf7b680094a9fffc6a Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Set camera power sequenceLijian Zhao
To make image sensor working, the intended power sequence need to applied. BUG=NONE TEST=NONE Change-Id: I4833c0e303174b297c1d193495e08e55d294a717 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Enable camera sensorsLijian Zhao
Sensors and CSI2 receiver configuration for Nocturne platform. IMX355 module has VCM, NVM and is on the second port of receiver. IMX319 module has NVM and is on the first port of receiver. Change-Id: I37c877df8062d5c79e25ed27775ab58e977555db Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/26283 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02nocturne: Do not set 4 LSB of SX9310 CRTL0Gwendal Grignou
These bits start the acquisition process. They should only be set by the driver. BUG=b:74363445 TEST=compile Change-Id: I9e10f5570ac82124f7f4b5cc7aaad27da0c578be Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02nocturne: Fix casing for register definitionGwendal Grignou
Use lower case for hex values. BUG=b:74363445 TEST=compile Change-Id: I24afea58b1a791fac3c87ad397a696f7f6e0d127 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mb/google/poppy/variants/nami: Perform PL2 setting for sonaJohn Su
According to sona thermal table, PL2 need to check cpu id. And then set PL2 value. BUG=b:110867809 TEST=The thermal team verify OK Change-Id: I5759fb3c685e3d4eef1be054541f950843d19874 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-06-29mb/google/poppy: Fix bytes 145-146 in nayna_dimm_NT6CL256T32CM SPDT.H. Lin
nayna/NT6CL256T32CM-H1 file change byte 145/146 to be"20" for JEDEC spec BUG=b:79443146,b:109708239 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test on R69.10825 with mosys Change-Id: Iadc820111f0aed34e5b46d7e23dff44cb5bb811d Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27275 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28nocturne: Fix uid and desc for sx9310Enrico Granata
This commit changes the uid and desc fields for the sx9310 entries in the devicetree to be unique, and correctly identify the position of the respective sensors. Change-Id: I501df7d3349fdebc9673c9815f5b1b2458abac6e Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
2018-06-28mb/google/poppy/variants/nautilus: Use GPP_B20 to determine SKUSeunghwan Kim
We would use GPP_B20 instead of board id to determine nautilus SKU. BUG=b:80052672 BRANCH=poppy TEST=Verified the new coreboot could determine SKU correctly Change-Id: I1978b544eef7a184a3da191306ee32d862fa8c36 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27220 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mb/google/poppy/variants/nocturne: Update TSR sensor infoSumeet Pawnikar
This patch updates TSR sensor info with appropriate names. Also, updates Charger effect with correct TSR sensor mapping. BUG=None BRANCH=None TEST=Build coreboot for Nocturne board. Change-Id: Ia3bbc78f8d823e88a91265e0d55c5ac2a4ea31a9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-25mb/google/poppy/variants/nami: Prevent leakage with touchscreen on PantheonCrystal Lin
We found GPP_C3 keeps high when system in S0ix mode. It caused 1.8V leakage. To fix this problem, add GPP_C3 into config for Pantheon Synaptics touchscreen. BUG=b:78436458 BRANCH=None TEST=Let DUT in S0ix mode and check GPP_C3 is normal. Change-Id: Idb2dab93178af1dae54265e49522b473b69a35af Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27177 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/nami: Enable xDCIShelley Chen
This change enables xDCI controller on nami. BUG=b:110443736 BRANCH=None TEST=None Change-Id: Ieb63e0d65ac1a142c151a3f93afe306b80a5d99a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/27181 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: Add two new Samsung memory optionsCaveh Jalali
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table BUG=b:110498646 BRANCH=none TEST=none Change-Id: Iddacdf1e1d0e2bae0c6168c86e54f5f602cd9d19 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27184 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: add GPIO for bluetooth enableCaveh Jalali
This configures a GPIO pin for enabling/disabling bluetooth on the next version of the atlas board. The default is for bluetooth to be enabled at this point. BUG=b:110614620,b:110613353 BRANCH=none TEST=none Change-Id: I4ba940e89b1dc03548b7ab44b8f84dc9a3097acb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27185 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22mb/google/poppy/variants/nami: Fix non-working thermal sensor QT2 PSVJohn Su
Modify DPTF TRT parameters to solve thermal sensor QT2 PSV problem. BUG=b:109941652 TEST=The thermal team verify OK Change-Id: Id9d39d8282712a0341fea10f74c0e40bb1ac9d7c Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22mb/google/poppy/variants/nocturne: Hook up the SX9310 proximity sensor.Enrico Granata
Change-Id: I7358ee34df873098a86d692cc8a909b0ec5023a8 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nocturne: add two new memory optionsNick Vaccaro
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table - add SPD files for K4E6E304EC-EGCF and K4EBE304EC-EGCF BUG=b:110277021 BRANCH=none TEST=none Change-Id: If1322311bd91842d6d32725822d91fd6d9e8077c Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nocturne: Update Slave Addresses of Max98373 Amp'sSathyanarayana Nujella
When played Left Only Audio and Right Only Audio, we observed that Audio got swapped. Left Data played on Right Speaker and Viceversa. This patch fixes the above issue. BUG=b:73635449 TEST=Play Left only & Right only Audio and cross check Audio. Change-Id: Ie9c417ad0634a76fc8a4126ee75886603f1b3da0 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/27167 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nocturne: disable p-statesNick Vaccaro
Set register speed_shift_enable=0 in devicetree to disable p-states in coreboot as a temporary workaround for an SoC hang. BUG=b:79666828 BRANCH=none TEST="emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I71ed4c80c109b28ffa85d48338ce3a62396d272e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/atlas: enable camera power and release resetCaveh Jalali
This is a temporary hack to test camera presence before we have full camera support implemented. Basically, we can now probe the camera over i2c to verify that it's connected and the camera LED turns on. BUG=b:80106316 BRANCH=none TEST=camera LED comes on and camera can be probed over i2c. Change-Id: Ibaabf6c6f6a1dabaddd2fc47c820e090ca5984a5 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27128 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/atlas: enable touchscreenCaveh Jalali
This adds the necessary config to enable touchscreen sensor in linux. BUG=b:110286344,b:110286345 BRANCH=none TEST=verified touch functionality using eval board Change-Id: I21efafda3f2ae1dcea19e44f8d66f6dfaac1bb12 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/atlas: support i2c-hid trackpadCaveh Jalali
We plan to use i2c-hid compatible trackpads on atlas, so this switches the trackpad config to i2c-hid. BUG=b:80662079 BRANCH=none TEST=used trackpad to verify motion tracking Change-Id: I2702e61a6aa96250c0c09ea4bd15d0c671eedadc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27126 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Add SAR sensor device into devicetree.cbSeunghwan Kim
This change defines SAR sensor device into devicetree.cb. Since only LTE sku has SAR sensor, we will use GPP_B20 as a device_present_gpio. BUG=None BRANCH=poppy TEST=Verified SAR sensor device is loaded by driver in Chrome OS Change-Id: Ib4969e4b82d18b1b1a599de8226c2d7d4bda7915 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27149 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Clear GPP_D0 when entering S5Seunghwan Kim
Nautilus 2nd SKU has a leakage voltage at GPP_D0 in S5 state. We need to set this to LOW when entering S5 for clear the leakage. BUG=None BRANCH=poppy TEST=Verified the leakage is gone after update coreboot Change-Id: I054e707b2bc2e63d6f99cd2fd8a57be20615f111 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nautilus: Configure for 2nd nautilus SKUSeunghwan Kim
For supporting new SKU, we need to override GPIO table and device configuration. The board ID of 2nd SKU of nautilus is started from 9, so we would determine SKU with it. BUG=b:80052672 BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: I7242f23f47010664cc29ea86a126e63c9dd62ccd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27147 Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-18mb/google/poppy/variants/nautilus: Correct USB OC pin configurationSeunghwan Kim
Due to schematic, we need to correct USB OC pin configuration. - OC0 for Type-C Port 1 - OC1 for Type-C Port 0 - OC2 for Type-A Port - OC3 to NC BUG=NONE BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: Ic71baef646926cc6aadcc5dda7cb14f00e8d3687 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-15mb/google/poppy/variants/nami: Update DPTF table from version 1.5John Su
Update dptf.asl and TCC parameters from tuning of the thermal team. BUG=b:72974136 TEST=Match the result from DPTF UI Change-Id: Ic0ffc169ad3939cacb46824ed23999c61a23d2c4 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27086 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14mb/google/poppy/variants/nocturne: config GPP_E2 for BT_DISABLE_LNick Vaccaro
GPP_E2 will be used as a BT reset line, so configure GPP_E2 as an output and initialize it high (high = out of reset). BUG=b:80089559 BRANCH=none TEST=none Change-Id: If45ef3a592c389a0b80298c59eea849d07d9671e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-14mb/google/poppy/variants/nocturne: config GPP_B4 for FCAM_PWR_ENNick Vaccaro
FCAM_PWR_EN signal is changing to connect to GPP_B4 instead of GPP_D8 as it needs a 3.3v gpio to provide enough power to also directly power the camera LED. BUG=b:79667559,b:78122599 BRANCH=none TEST=none Change-Id: Ie875ced45dfa2aa7069851004edde8f77329df34 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-11mb/google/poppy/variants/nami: Add EC_ENABLE_TBMC_DEVICEShelley Chen
Add tablet motion control config to nami devices. BUG=None BRANCH=None TEST=run evtest make sure tablet switch value is 1 in tablet mode and 0 when not in tablet mode Change-Id: Ie1480934dc003d9b467883e001ed89f9a3694d10 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26970 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11mb/google/poppy/variants/nocturne: enable nvmeNick Vaccaro
- configure GPP_B7 (PCIE_NVME_CLKREQ_ODL) for NF1 - enable root port 9 - add nvme register settings to devicetree BUG=b:78122599 BRANCH=chromeos-2016.05 TEST='emerge-nocturne depthcharge coreboot chromeos-bootimage', boot to kernel, and verify /dev/nvme* entries exist. CQ-DEPEND=CL:1090070 Change-Id: I0070d33b1ed09bd1f51a680d92ddb7e2bcb1ebc2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-07mb/google/poppy: Select right TPM interfaceNaresh G Solanki
TPM over SPI/I2C config selection got changed in https://review.coreboot.org/c/coreboot/+/24903 so this CL is fixing the same. BUG=None BRANCH=None TEST=Build for Soraka & make sure that TPM is probed over I2C interface rather than SPI. Change-Id: I077e4dc03520e26eb9f6404a7eb1edd99925de77 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26890 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07mb/google/poppy/variants/nami: Disable rear camera/DMIC for SonaAmanda Huang
Since there are two cameras on Nami and only one camera on Sona. We need to disable rear camera/DMIC on all Sona sku. BUG=b:109710674 BRANCH=master TEST=Verify if only front camera/DMIC shown on Sona Change-Id: Id84ee22c9ffc15db78be3bbad148af5cd7dc866e Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07mb/google/poppy/variants/nami: Disable rear camera/DMIC for PantheonAmanda Huang
Since there are two cameras on Nami and only one camera on Pantheon. We need to disable rear camera/DMIC on all Pantheon sku. BUG=b:109720689 BRANCH=master TEST=Verify if only front camera/DMIC shown on Pantheon Change-Id: Ibe48a945dc57f2c05344479253040ad1945d92fd Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-06mb/google/poppy/variants/atlas: update HP IRQ pin's pad configSathyanarayana Nujella
Issue observed on the board is: too many jack interrupts. cat /proc/interrupts | grep da7219 58: 84292 15709 0 0 IO-APIC 58-fasteoi da7219-aad Updated pad configuration for Jack IRQ pin to fix the issue. BUG=b:109655907 TEST=Jack insertion & removal detection is working. Change-Id: I41ef9d40325677b01ca94ec3215e7feded76dcc3 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06mb/google/poppy/variants/nami: Add delay to enable_gpio during Elan power onShelley Chen
During measurement of signals during Elan touchscreen power on, saw that the enable_gpio delay was not sufficient as there is a +1.5 ms delay during power on. Adding more delay to take this into account. BUG=b:78311818 BRANCH=None TEST=probe power on signals to ensure meet timing requirements Change-Id: Id661a202188a97aef97514ebecd0be6fc022d21e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06mb/google/poppy/variants/nami: Fix Elan touchscreen power off sequenceShelley Chen
Power off does not seem to use the ACPI _OFF function, but rather the smihandler. Creating variant_smi_sleep function for nami to handle the power off sequence during reboot/power off. BUG=b:78311818 BRANCH=None TEST=Run "poweroff" command from AP console with SMI_DEBUG enabled Make sure delays are consistent with spec Change-Id: Ifeea545fe268be249793b3e508c51f5e4c1a3460 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05mb/google/poppy/variants/nami: Disable rear camera/DMIC for vayne skuid 3A67Van Chen
Since Vayne added one more skuid 3A67, we need to disable rear camera/DMIC for vayne skuid 3A67. BUG=b:75073617 BRANCH=master TEST=Verify if only front camera/DMIC shown on Vayne Change-Id: I9131b4c41bf189829be4e7e6bfaf4a96765cfa15 Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26855 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05soc/intel/skylake: Add option to skip coreboot MP initSubrata Banik
This patch provides option for mainboard to skip coreboot MP initialization if required based on use_fsp_mp_init. Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init * 1 = Make use of FSP MP Init Default coreboot does MP initialization. Change-Id: I8de24e662963f4600209ad1b110dc950ecfb3a27 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-03mb/google/poppy/variants/nami: Load vayne VBT binaryIvy Jian
Load vbt-vayne.bin by reading sku-id. BUG=b:80509366 TEST=Boots to OS and display comes up. Check the board specific vbt binary loaded. Change-Id: Ia26ea4a9b7679aeb9d98f19ffaa1b686af828339 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-01mb/google/nautilus: Add "rotation" controljimlai
The driver only supports streaming images flipped horizontally and vertically. In order to ensure that all current users will be fine if or when support for upright streaming is added, require the presence of the "rotation" control now. BUG=None BRANCH=None TEST=Verified the MIPI and USB camera function on DUT board Change-Id: I7e3abdea9071da1a089c7165f6bb609428090792 Signed-off-by: Lai, Jim <jim.lai@intel.com> Reviewed-on: https://review.coreboot.org/26727 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31mb/google/poppy/variants/nocturne: configure the FPMCU interfaceVincent Palatin
The FPMCU is using the standard cros-ec-spi interface on GSPI1. Configure the GPIOs controlling the MCU too. We need to be able to wake from S3 on the MCU interrupt, re-configure GPE0 DW0 to point to GPP_C bank. BRANCH=poppy BUG=b:79666174 TEST=exercise the cros_ec interface, e.g. 'ectool --name=cros_fp version', verify the MKBP events by doing 'ectool --name=cros_fp fpmode fingerup' then 'ectool --name=cros_fp waitevent 5 10000', toggle the other GPIOs with the flash_fp_mcu script. Change-Id: Ib417dcf84cda8e354060785cd16a7b6b812148d5 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/26684 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/poppy/variants/nami: Perform PL2 setting in variant_devtree_udpateFurquan Shaikh
This change moves PL2 override to variant_devtree_update for two reasons: 1. This function was added to basically override devtree settings in variant specific code. So, it would be a good idea to perform all the overrides in a single place. 2. Adding a device for performing nami_enable would require changes to devicetree and special handling for calling this device enable. Thus, nami_enable was never getting called. BUG=b:80148703 Change-Id: Ifa24a7b6e99cad2368b3d656a757f26297373121 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25mb/google/poppy/variants/nami: Use GPP_E4 for BT_OFF#Frank Wu
The BT W_DISABLE2# pin is connected to GPP_E4 in the latest schematic. Update GPP_E4 as GPO and set 1 as default. BUG=b:79993692, b:72007632 BRANCH=None TEST=Enable/disable BT/WLAN by following command. Enable: localhost ~ # iotools mmio_write32 0xfdae0590 0x40000201 localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000201 Disable: localhost ~ # iotools mmio_write32 0xfdae0590 0x40000200 localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000200 Change-Id: I9ef1a5314652ab29172d246abd58ee4e1a8a6299 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26502 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24mb/google/poppy: Enable SAR config on NamiAmanda Huang
This change enables SAR config on Nami with CHROMEOS option. BUG=b:75077304 BRANCH=master Change-Id: I8217333db2db6c0fd5e1c144dedd3692b1e1e6a3 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: enable MKBPNick Vaccaro
BUG=b:79617938 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage", flash nocturne, boot to kernel, run evtest and verify that cros-ec-buttons is present and functional. Change-Id: Id710782e1f4e18eaac2a90c7c0f91af5223dbce3 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: enable I2C #5 busNick Vaccaro
Enable I2C #5 for rear camera and SAR. BUG=b:79784124 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage' and verify i2c bus #5 is detected. Change-Id: Ic5b754fb97231aeab0278d71f8ced9343c30feda Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: deassert audio amp resetNick Vaccaro
Drive SPKR_RST_L (GPP_A19) high at boot to take audio amps out of reset. BUG=b:78122599 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage", boot to kernel, and verify sound works via "aplay /dev/random" Change-Id: Ia49931f2dc7802edc8a46114b081e4a96eeee604 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-23mb/google/poppy/variants/nocturne: add touchscreen register infoNick Vaccaro
- add ACPI register information for touchscreen WCOM digitizer BUG=b:78122599 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage" and verify touchscreen on Nocturne board works. Change-Id: I9790a930e8ed2748d568ce58c931ce34b3e22007 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-18mb/google/poppy/variants/nami: Fix SoC I2C CLK is abnormalChris Zhou
The I2C CLKs of SoC should be 400kHz, but waveform show 460kHz to 470kHz. Add I2C parameters to adjust I2C CLKs which 5% lower than 400kHz. BUG=b:78819970 TEST=The I2C CLKs are 5% lower than 400kHz. Change-Id: I2c3012b5b59c089801cda8fd7b0c433aad9df36d Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26282 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-18mb/google/poppy/variants/nocturne: enable pogo pin USB portNick Vaccaro
BUG=b:78122599 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage" and verify pogo pin port is working. Change-Id: Ide7359366821f33c4746284e65cacdf4e240931d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-17mb/google/poppy/variants/nami: Update DPTF tableJohn Su
Update dptf.asl from tuning of the thermal team. BUG=b:72974136 TEST=Match the result from DPTF UI. Change-Id: I21ddc337359c3e11ad9756e61ba174b33dfc3c75 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-05-17mb/google/poppy: Disable one ALS nodeAmanda Huang
Since there are two ALS device nodes on Nami, need to remove one. BUG=b:79227879 BRANCH=master TEST=Verify if only one ALS node is found in /sys/bus/iio/devices Change-Id: I850af06bec833739afa0c8c516d351d81952ce2c Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26271 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-16mb/google/poppy/variants/nami: Load pantheon VBT binaryIvy Jian
Load pantheon.bin by reading sku-id. BUG=b:78663963 TEST=Boots to OS and display comes up. Check the board specific vbt binary loaded. Change-Id: I66cb43d87363b3e8b1a1498cdae8eeeb8b75219d Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-16mb/google/poppy/variants/nami: Enable synaptics touchscreen supportIvy Jian
BUG=b:74595040 BRANCH=master TEST= 1. emerge-nami coreboot chromeos-bootimage 2. Booted on Pantheon with S7817 PCBa connected 3. Check touchscreen device is enabled by evtest /dev/input/event4: SYTS7817:00 06CB:7817 Change-Id: Ic11684d5ed961af5eb704909f7d06eb0898068c2 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-12mb/google/poppy/variants/nami: Provide implementation of mainboard_vbt_filenameFurquan Shaikh
This change adds board-specific implementation of mainboard_vbt_filename which returns "vbt.bin" by default. This is in preparation to allow multiple vbt binaries to be added to single image. More sku_id specific names will be added in follow-up CLs. BUG=b:79396300 Change-Id: I3821d55bfbe9e5773bd2eb0b0003045a80158d8c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-11mb/google/poppy/variants/atlas: add SPD for new samsung 4GB memoryCaveh Jalali
This adds a new SPD entry for samsung's new 4GB memory and updates atlas to use it instead of the previous gen memory. BUG=b:79444337 TEST=booted on atlas Change-Id: I19567736c45a1321586378c3d964c2cbebe24755 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/26185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-11mb/google/poppy/variants/nami: add 2-channel LPDDR3 memoryT.H. Lin
hynix/H9CCNNNCLGALAR-NUD nayna/NT6CL256T32CM-H1 BUG=b:79443146 BRANCH=Nami TEST=emerge-nami coreboot chromeos-bootimage Change-Id: I3a362080b9e60adecbac14d5cfe193da44bf87c8 Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-09mb/google/poppy/variants/nocturne: update Audio configurationSathyanarayana Nujella
This patch updates the below: 1) Nocturne board has only Max98373 speaker amp. Update both NHLT and DT entries to include only Max98373 and not include DA7219. 2) I2S2 is used for Boot Beep. So, update GPP_F0 ~ F2 pins accordingly. 3) Include DMIC-4ch configuration. BUG=b:79362472 TEST=None [Waiting for HW to verify] Change-Id: I0e9b3a564c22de6e84e96e5e937a3aca4ae73d75 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26143 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09mb/google/poppy/variants/nami: Add support for getting OEM name from CBFSFurquan Shaikh
This change: 1. Allows mainboard to add OEM table to CBFS 2. Provides mainboard specific smbios_mainboard_manufacturer that reads OEM ID from EC using CBI and compares it against the OEM ID in CBFS table to identify the right OEM string. BUG=b:74617340 Change-Id: Iff54b12745de3efa7be0801c9a3a9f2a57767dde Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-08mb/google: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I8e549e4222ae2ed6b9c46f81c5b5253e8b227ee8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-08mb/google/poppy/variants/atlas: update DMIC NHLT configurationSathyanarayana Nujella
From coreboot side, include DMIC 4ch NHLT configuration and its DMIC blob. In OS side, cras picks the needed channels using UCM's channel map configuration. So, this patch updates to include DMIC 4ch config. BUG=b:79158926 TEST=Verified 4-ch record with arecord TEST=Also verified internal mic record with cras using 'cras_test_client --capture_file dmic.raw --rate 48000 --num_channels 2 --duration 10' Change-Id: Ic6df00c2f26ad9cdf54152ab021c2b10499c429c Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26019 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-07mb/google/poppy/variants/nami: Invert polarity of EMR_GARAGE_DET#Shelley Chen
This gpio should be active low, but is not currently configured that way. Changing gpio configuration to reflect that. BUG=b:73121017, b:77941823 BRANCH=None TEST=iotools mmio_read32 0xfdae0588 (GPP_E1) Make sure that when pen is ejected, gpio is low and when pen is inserted, gpio is high. Also tested that wake upon pen eject is working. Change-Id: Ic49eea6412c3378dca39a3338b43df12bc27037d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26017 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-04mainboard/google: Comment variant names in KconfigMartin Roth
It's very confusing trying to find the google platform names, because they seem all unsorted in Kconfig. They're actually sorted according to the variant name, but previously, that was impossible to tell. - Add a comment to the top of variants in Kconfig.name - Inset each variant name. If you start a prompt with whitespace, it gets ignored, so after trying various ways to indent, the arrow was the option I thought looked the best. It now looks like this: *** Beltino *** -> Mccloud (Acer Chromebox CXI) -> Monroe (LG Chromebase 22CV241 & 22CB25S) -> Panther (ASUS Chromebox CN60) -> Tricky (Dell Chromebox 3010) -> Zako (HP Chromebox G1) Butterfly (HP Pavilion Chromebook 14) Chell (HP Chromebook 13 G1) Cheza *** Cyan *** Change-Id: I35cb16b040651cd1bd0c4aef98494368ef5ca512 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-02mb/google/poppy/variants/nami: Enable touchscreen through ACPIShelley Chen
Currently, we've set TOUCHSCREEN_DIS gpio to disabled. Enabling through ACPI. Set reset/enable/stop_off_ms variables to get timings of power off sequence correct. BUG=b:78311818 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: Ib1543f41f24cbe8c33aeb02e6aa43fd3dd977ed4 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/25754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-05-01mb/google/poppy: Add variant for nocturneNick Vaccaro
Add a new variant of poppy for the nocturne board. Key differences from baseboard include: - GPIO changes - devicetree.cb changes - memory stuffing option changes BUG=b:78122599 BRANCH=none TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I11c7829041b3c45407c17f71b08cc7fc17f717e8 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/25803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-01mb/google/poppy/variants/nami: Enable Synaptics touchpadivy_jian
BUG=b:74595037 TEST= 1. emerge-nami coreboot chromeos-bootimage 2. check touchpad function 3. evtest /dev/input/event5: PNP0C50:00 06CB:CD84 Change-Id: I47cb1b13881f0d52860f0afe4bbca7483409de54 Signed-off-by: ivy_jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25913 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-30google/poppy: enable trackpad as wake sourceCaveh Jalali
This configures GPP_A23 as a wake source for the trackpad. We also need to set up GPP_A GPE0_DW0, thus evicting GPP_B. We don't have any interesting signals in GPP_B, so we won't be missing it. I don't have hardware with A23 wired up, so i just tested the wake source using A19 which is essentially identical to A23. BUG=b:78541883 TEST=verified we can trackpad can wake system from suspend Change-Id: If800464c8b2319d758b1823850571919f85bdc6c Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/25850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-27mb/google/poppy,soraka,nautilus: Enable xDCIFurquan Shaikh
This change enables xDCI controller on poppy, nautilus and soraka. BUG=b:78577893 BRANCH=poppy Change-Id: I9b0f81bda889b822479ead4d1acc2b613151a304 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25849 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-24mb/google/poppy/variants/nami: Add keyboard backlight supportZhuohao Lee
This change adds keyboard backlight feature for Nami platform BUG=b:78360907 BRANCH=none TEST=keyboard backlight works when EC reports correct info. Change-Id: I3fceb83e155032b6e9f1763c4e2a29e7521269d2 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/25782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-23mb/google/poppy/atlas: Enable trackpadCaveh Jalali
This enables the i2c trackpad on atlas. BUG=b:75454415 TEST=able to move pointer using trackpad Change-Id: If4a82aa605ec68fd38e52c13406eaf803f9e86cc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/25759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-18mb/google/poppy/variants: Set VmxEnable to 1Furquan Shaikh
This change sets VmxEnable to 1 to match the kernel setting. If this feature is enabled at the kernel level and not in FSP, then there is an issue where FSP expects it to be disabled so it forces a cold reboot on every warm reboot. BUG=b:78129261 BRANCH=poppy Change-Id: Idedbde1d8eb0c9e959733b7b50e5dec804d61cae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25698 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-17mb/google/poppy/variants/nami: Update GPIOsShelley Chen
Updating some GPIOs based on changes in the latest schematics. Also renaming signals to match that of latest schematics. BUG=b:73749640 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Make sure different SKUs still boot. Change-Id: I7d912f4bc6765f065c75c68a45bdf9ee844e0c1d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/25646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-17mb/google/poppy/variants/nami: Enable DPTF and configure DPTF parametersFrank Wu
The commit enables DPTF function. The DPTF parameters are provided by thermal team. BUG=b:72974136 BRANCH=poppy TEST=emerge-nami coreboot then check the parameters in DPTF ui tool Change-Id: I9b7ae34ee64f19ef783a8c1571831b2293105a18 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-16mb/google/poppy/variants/nami: Add SPD file for PantheonChris Zhou
Add SPD file for sdp hynix_dimm_H5AN8G6NCJR-VKC (ram id: 15). BUG=b:77893710 TEST=Verified that the device with this memory part boots to OS fine. Change-Id: I434d42ff12e6dae39e5676f36ba6cf00b3a48b06 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-16mb/google/poppy/variants/nami: Add SPD file for PantheonChris Zhou
Add SPD file for sdp micron_dimm_MT40A512M16LY-075E (ram id: 14). BUG=b:77930401 TEST=Verified that the device with this memory part boots to OS fine. Change-Id: Ia44e70948e57c2f19664d874ae005ac39d748f92 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-10mb/google/poppy/atlas: Fix SPD index in commentJonathan Neuschäfer
Fixes: ba49c09b2f ("mb/google/poppy: Add variant for Atlas") Change-Id: I9c5c10abf8129ff61b97312a70ed4749606a3090 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25556 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10mb/google/poppy: Disable rear camera for all vayne skuAmanda Huang
Since there are two cameras on Nami and only one camera on Vayne. We need to disable rear camera on all Vayne sku. BUG=b:75073617 BRANCH=master TEST=Verify if only front camera shown on Vayne Change-Id: I6e7c1e8791462f00ad8336372954ee0a9465d9b8 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-05mb/google/poppy/variants/nami: Add SPD file for Vaynechriszhou
Add SPD file for sdp hynix_dimm_H5AN8G6NAFR-UHC (ram id: 6). BUG=b:77290144 TEST=Verified that the device with this memory part boots to OS fine. Change-Id: I33503de21c9fc14537c00c092986fd4d2998dace Signed-off-by: chriszhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com>
2018-03-30mb/google/poppy: Add variant for AtlasDuncan Laurie
Add a new variant of Poppy for the Atlas board. BUG=b:75454415 TEST=tested on a P0 board. System boots and is mostly functional, though some peripherals are not ready so there are no touchpad/touchscreen devices configured yet. Change-Id: I5a0bccd1bda0134aa51885ac2c6e7bb5b45de924 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-28soc/intel/skylake: Limit xDCI feature when VBOOT is enabledDuncan Laurie
Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb and the mainboards that had defined it were adjusted accordingly. This was tested on an Eve board with xDCI enabled in devicetree.cb to ensure the xDCI device is enabled in developer mode and disabled in normal mode. Change-Id: Ic3c84beac87452f17490de32082030880834501d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25365 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-28mb/google/poppy/variants/nami: Add SPD file for sona.Van Chen
Add SPD file for sdp samsung_dimm_K4A8G165WC-BCTD (ram id: 8). BUG=b:76086834 TEST=Verified that the device with this memory part boots to OS fine. Change-Id: I49fa114f07ad2eef10f18de9f6c3380173681bdd Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25379 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-27mainboard/google/poppy: Add SPD for Hynix H9CCNNNCLGALAR-NUDDuncan Laurie
Add an SPD for this particular Hynix memory type to the poppy board so it can be used by poppy variants. BUG=b:75454415 Change-Id: I2249c7a4f2c83ec2b3266047a74b9bc22dad43be Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/25368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-26mb/google/poppy/variant/nautilus: Turn off MIPI camera in PMOF methodSeunghwan Kim
This change remove work-around code for the power issue of MIPI and USB cameras on previous board revision. With the work-around code, PMOF ACPI method cannot turn off MIPI camera. So we need to remove it. BUG=b:74214248 BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: I7becaf61de364f82976ec0be7f8c9e4ef1a7aedd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/25337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-21mb/google/poppy/variants/nami: change type of board_sku_id() to uint32_tZhuohao Lee
Tools/scripts, like mosys/arc-setup, use int (4 bytes) to read the sku id. In order to support "-1", we need to use uint32_t (4 bytes) instead of using uint16_t (2 bytes) data type. Otherwise, tools/scripts will read 65535 instead of -1. Another reason to change this is that sku_id can be supported by ec up to 4 bytes. BUG=b:73792190 TEST=mosys output "Platform not supported" for -1 sku id arc-setup read -1 sku id Change-Id: Ib3baa8419f138abeb412ac09c2e7dc608e3b758b Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/25252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-21mb/google/poppy/variant/nautilus: Enable CABC feature as defaultSeunghwan Kim
This change configures GPP_E22 to GPO_HIGH to enable CABC feature on nautilus board. BUG=b:68789889 BRANCH=poppy TEST=emerge-nautilus coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Ifed0d37bf8147aa1b580f594f36f186051c2eb52 Reviewed-on: https://review.coreboot.org/25120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19mb/google/poppy: Config GPIO for DMIC by different sku idamanda_hwang
BUG=b:74177699 BRANCH=poppy TEST=Verify audio recorder function by different SKU ID Change-Id: Ic6570703f6ab4a1b03cbba8370fc0f597ab6bcf2 Signed-off-by: amanda_hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-15mb/google/poppy/variants/nami: Add gpio-keys ACPI node for PENHShelley Chen
Use gpio_keys driver to add ACPI node for pen eject event. Also setting gpio wake pin for wake events. BUG=b:73121017 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I5d87d938ac3a4e52e676850b9d8b80e83726275d Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-15mb/google/poppy/variants/nami: Use GPP_B4 as Touchscreen Power EnableShelley Chen
Touchscreen power enable for Nami has moved from GBB_C22 to GPP_B4 in the latest schematics. BUG=b:74347464 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I3b1794d44f25c0d42d082d63b9e3ec3dfcef7528 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25154 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-14mb/google/poppy/variants/baseboard: Add gpio-keys ACPI node for PENHNicolas Boichat
This change uses gpio_keys driver to add ACPI node for pen eject event. BUG=b:74413116 TEST=Verified using evtest that pen eject event results in events as expected. Change-Id: I6019d633f4337137bb9fbba770040cb5b30da773 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/25147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-13mb/google/poppy/variants/nautilus: Enable SAR configsFurquan Shaikh
This change enables SAR configs when building with CHROMEOS option. BUG=b:74439919 Change-Id: I11a8fa04a77f688ed288780f2c605b8ac701f5a9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-13mb/google/poppy/variants/nami: Use internal pulldown for MEM_CONFIG_4Furquan Shaikh
Since nami proto did not have any external pull on MEM_CONFIG_4, use a weak internal pull down before reading it. BUG=b:74420123 TEST=Verified that the value read for MEM_CONFIG_4 is correct on nami. Change-Id: I45989d2ca35b863f391baba9e2f2e602033217d4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-12mb/google/poppy: Clear memory_params before initializing themNicolas Boichat
Make sure that fields that are not updated in variant_memory_params keep a default value of 0. In particular, use_sec_spd is intended to have a default value of 0 on all platforms. Without this patch, a random value is used and all boards (except nami) get stuck on boot. BRANCH=poppy BUG=b:74439917 TEST=Nautilus and poppy can boot, and do not get stuck at "CBFS: 'sec-spd.bin' not found." Change-Id: I06c6511625de930903ae13788bdcd27667a17886 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/25101 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-09mb/google/poppy/variants/nami: Fix typo in nami MakefileFurquan Shaikh
Change SECONDARY_SPD_SOURCES to SEC_SPD_SOURCES as that is what the spd target expects. TEST=Verified that sec-spd.bin is present in coreboot.rom Change-Id: I4299df1eb9009095ef899c5b83823750dfc715d8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-08mb/google/poppy/variants/nami: Define smbios_mainboard_sku to return SKU IDsShelley Chen
Return proper SKU IDs so that mosys can return the proper variant. BUG=b:74059798 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: I665fa491de6e277fea5cc071b1f04a21317bccba Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/25028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-08mb/google/poppy : Get SKU_ID from EC for Nami/Vayneamanda_hwang
CBI abbreviates Cros Board Info. BUG=b:74177699 BRANCH=master TEST=Verify CPU log shows expected SKU ID on Nami. Change-Id: I42dd177de8c49cf3c122c2ebb1fcf42e5ba4cd75 Signed-off-by: amanda_hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/24996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-03-08mb/google/nautilus: Correct LINK FREQ of imx258 sensorAlan Chiang
Per vendor datasheet, corrected linkfreq of imx258 as {633600000, 320000000} BUG=None BRANCH=None TEST=Verified the MIPI and USB camera function on DUT board Change-Id: Ie5beed44c15e26b9f82cb305a91b8ff90a9ea867 Signed-off-by: Andy Yeh <andy.yeh@intel.com> Reviewed-on: https://review.coreboot.org/24990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 19:45:34 +0000