Age | Commit message (Expand) | Author |
2018-09-26 | Revert "mb/google/poppy/variants/nautilus: Set grip sensor threshold" | Seunghwan Kim |
2018-09-21 | mb/google/poppy/variants/rammus: Disable command TriState for rammus | marxwang |
2018-09-21 | mb/google/poppy/variant/nocturne: set DMIC1 to NC | Nick Vaccaro |
2018-09-20 | mb/google/poppy/variants/nocturne: Update DPTF settings | Puthikorn Voravootivat |
2018-09-16 | mb/google/poppy/variants/rammus: fix S0ix entering issue | Zhuohao Lee |
2018-09-16 | mb/google/poppy: Set UPD CmdTriStateDis for Atlas | Caveh Jalali |
2018-09-12 | mainboards: Add SMMSTORE region in chromeos configs | Patrick Georgi |
2018-09-12 | rammus: add SPD mapping for rammus and shyvana support | kane_chen |
2018-09-10 | mb/google/poppy/variants/nami: Add SPD for two memory parts | Ren Kuo |
2018-09-10 | mainboard/google/poppy/variants/rammus: Enable DA7219 | marxwang |
2018-09-10 | mb/google/poppy: Set UPD CmdTriStateDis for Nocturne | Shaunak Saha |
2018-09-07 | mb/google/poppy/variants/atlas: enable NVMe | Caveh Jalali |
2018-09-06 | mainboard/google/poppy/variants/rammus: Enable GSPI clock for bus 0. | kane_chen |
2018-09-06 | mb/google/poppy/variants/nocturne: Enable DMIC CLK0/DATA0 | Sathyanarayana Nujella |
2018-09-06 | mb/google/poppy/variants/nautilus: Bump VCC_SA voltage offset 75mV | Seunghwan Kim |
2018-09-04 | mb/google/poppy/variants/rammus: add sku info into smbios table | Zhuohao Lee |
2018-09-02 | mb/google/poppy/Kconfig: Fix missing device node /dev/tpm0 for H1 | Zhuohao Lee |
2018-08-30 | mb/google/poppy/variants/nautilus: Set grip sensor threshold | Seunghwan Kim |
2018-08-27 | mb/google/poppy/variants/atlas: Update DPTF parameters | Todd Broch |
2018-08-27 | mb/google/poppy/variants/nocturne: Update DPTF parameters | Todd Broch |
2018-08-23 | mb/google/poppy/variants/nocturne: enable "Base Attached Switch" device | Dmitry Torokhov |
2018-08-20 | atlas: enable keyboard backlight support | Caveh Jalali |
2018-08-20 | mb/google/poppy/variants/nocturne: enable eist | Matt Delco |
2018-08-20 | nocturne: Enable debouncing of SX9310 CLOSE / FAR IRQs | Enrico Granata |
2018-08-17 | Nami: Disable powering off EC on cr50 update | Daisuke Nojiri |
2018-08-15 | mb/google/poppy/variants/nocturne: remove dup'ed dptf_enable | Matt Delco |
2018-08-15 | mb/google/poppy/variants/nocturne: sx9310 to 400kb | Matt Delco |
2018-08-15 | Revert "mb/google/poppy/variants/atlas: enable camera power and release reset" | Caveh Jalali |
2018-08-15 | mb/google/atlas: Add DISPLAY_DCR_EN GPIO pin | Caveh Jalali |
2018-08-15 | mb/google/atlas: Update DPTF sensor names | Caveh Jalali |
2018-08-14 | mb/google/poppy/variants/nocturne: Update PL1/PL2 for AML | Roy Mingi Park |
2018-08-14 | mb/google/poppy/variant/nami: Add TSR2 on DPTF | T.H. Lin |
2018-08-13 | mb/google/poppy/variants/nocturne: remove icc_max overrides | Nick Vaccaro |
2018-08-13 | mb/google/poppy/variant/nocturne: update PL2 based on CPU sku | Nick Vaccaro |
2018-08-13 | mb/google/poppy/variant/atlas: Update PL2 based on CPU sku | Gaggery Tsai |
2018-08-09 | mb/google/poppy/variants/atlas: Do not override icc_max | Caveh Jalali |
2018-08-07 | mb/google/poppy/variants/nautilus: Set CABC_EN to GPO high before EDP power on | Seunghwan Kim |
2018-08-07 | mb/google/poppy: Add variant callback for romstage GPIO configuration | Furquan Shaikh |
2018-08-07 | mb/google/poppy/variants/nautilus: Add SKU info to SMBIOS | Furquan Shaikh |
2018-08-06 | mb/google/poppy/variants/rammus: add rammus devicetree.cb | Zhuohao Lee |
2018-08-06 | mb/google/poppy/variants/rammus: add gpio setting | Zhuohao Lee |
2018-08-06 | mb/google/poppy/variants/rammus: add memory configuration | Zhuohao Lee |
2018-08-06 | mb/google/poppy/variants/rammus: add audio, mic and codec configuration | Zhuohao Lee |
2018-08-06 | mb/google/poppy/variants/rammus: change build directory to rammus | Zhuohao Lee |
2018-08-03 | mb/google/poppy/variants/atlas: Apply correct AC/DC loadlines | Gaggery Tsai |
2018-08-02 | mb/google/poppy/variants/nami: Tune Fan speed | Sumeet Pawnikar |
2018-08-02 | mb/google/poppy/variants/nami: Enable mbox command for ISL VR c-state issue | Shelley Chen |
2018-08-01 | mb/google/poppy/variant/nami: Overwrite AC/DC loadlines | Gaggery Tsai |
2018-07-30 | mb/google/poppy/variants/atlas: Add new Nanya memory option | Tim Chen |
2018-07-30 | mainboard/google/nocturne: simplify camera power references | Matt Delco |
2018-07-30 | mb/google/poppy/variants/nocturne: enable FPMCU power | Nick Vaccaro |
2018-07-30 | mb/google/poppy/variants/nocturne: enable ec host event wake | Nick Vaccaro |
2018-07-30 | mb/google/nautilus: Remove obsolete fields | Alan Chiang |
2018-07-30 | mb/google/poppy/variants/nautilus: Set GPP_D21 to high as default | Seunghwan Kim |
2018-07-30 | mb/google/poppy/variants/nami: Fix fan is always ON | John Su |
2018-07-26 | nocturne: configure VR per Intel recommendation | Pratik Prajapati |
2018-07-26 | mb/google/poppy/variants/nocturne: enable p-states | Pratik Prajapati |
2018-07-25 | mb/google/x86-boards: Get rid of power button device in coreboot | Furquan Shaikh |
2018-07-24 | mb/google/poppy/variant/nami: Add custom VBT for panel T8/T10 | T.H. Lin |
2018-07-23 | mb/google/poppy/variants/rammus: Add support for rammus board | Zhuohao Lee |
2018-07-22 | mb/google/nautilus: Enable camera module NVM | Alan Chiang |
2018-07-22 | mb/google/poppy/variants/nautilus: Add internal pull-up for USB2_OC2# | Seunghwan Kim |
2018-07-21 | nocturne: enable GEO SAR | Pratik Prajapati |
2018-07-20 | mb/google/poppy/variants/nocturne: set nvme to use clk src 3 | Nick Vaccaro |
2018-07-17 | mb/google/atlas: Add MIPI camera ASL files | Chen, Ping-chung |
2018-07-13 | mb/google/poppy/variants/nami: Use Pantheon VBT | Ivy Jian |
2018-07-12 | mainboard/google/nocturne: Update GPIO_FCAM_PWR_EN | Ricky Liang |
2018-07-11 | skylake: Remove "IshEnable" | li feng |
2018-07-11 | mainboard/google/poppy/variants/atlas: config ISH in mainboard side | li feng |
2018-07-06 | mb/google/poppy/variants/nocturne: fix FPMCU IRQ sensitivity | Vincent Palatin |
2018-07-06 | google: Use proper ACPI ID for Semtech chips: STH | Gwendal Grignou |
2018-07-03 | mb/google/*: Remove selection of DRIVERS_PS2_KEYBOARD | Furquan Shaikh |
2018-07-02 | mainboard/google/nocturne: Enable IPU3 | Lijian Zhao |
2018-07-02 | mainboard/google/nocturne: Set camera power sequence | Lijian Zhao |
2018-07-02 | mainboard/google/nocturne: Enable camera sensors | Lijian Zhao |
2018-07-02 | nocturne: Do not set 4 LSB of SX9310 CRTL0 | Gwendal Grignou |
2018-07-02 | nocturne: Fix casing for register definition | Gwendal Grignou |
2018-07-02 | mb/google/poppy/variants/nami: Perform PL2 setting for sona | John Su |
2018-06-29 | mb/google/poppy: Fix bytes 145-146 in nayna_dimm_NT6CL256T32CM SPD | T.H. Lin |
2018-06-28 | nocturne: Fix uid and desc for sx9310 | Enrico Granata |
2018-06-28 | mb/google/poppy/variants/nautilus: Use GPP_B20 to determine SKU | Seunghwan Kim |
2018-06-28 | mb/google/poppy/variants/nocturne: Update TSR sensor info | Sumeet Pawnikar |
2018-06-25 | mb/google/poppy/variants/nami: Prevent leakage with touchscreen on Pantheon | Crystal Lin |
2018-06-25 | mb/google/nami: Enable xDCI | Shelley Chen |
2018-06-23 | mb/google/poppy/variants/atlas: Add two new Samsung memory options | Caveh Jalali |
2018-06-23 | mb/google/poppy/variants/atlas: add GPIO for bluetooth enable | Caveh Jalali |
2018-06-22 | mb/google/poppy/variants/nami: Fix non-working thermal sensor QT2 PSV | John Su |
2018-06-22 | mb/google/poppy/variants/nocturne: Hook up the SX9310 proximity sensor. | Enrico Granata |
2018-06-21 | mb/google/poppy/variants/nocturne: add two new memory options | Nick Vaccaro |
2018-06-21 | mb/google/poppy/variants/nocturne: Update Slave Addresses of Max98373 Amp's | Sathyanarayana Nujella |
2018-06-21 | mb/google/poppy/variants/nocturne: disable p-states | Nick Vaccaro |
2018-06-21 | mb/google/poppy/variants/atlas: enable camera power and release reset | Caveh Jalali |
2018-06-21 | mb/google/poppy/variants/atlas: enable touchscreen | Caveh Jalali |
2018-06-21 | mb/google/poppy/variants/atlas: support i2c-hid trackpad | Caveh Jalali |
2018-06-21 | mb/google/poppy/variants/nautilus: Add SAR sensor device into devicetree.cb | Seunghwan Kim |
2018-06-21 | mb/google/poppy/variants/nautilus: Clear GPP_D0 when entering S5 | Seunghwan Kim |
2018-06-21 | mb/google/poppy/variants/nautilus: Configure for 2nd nautilus SKU | Seunghwan Kim |
2018-06-18 | mb/google/poppy/variants/nautilus: Correct USB OC pin configuration | Seunghwan Kim |
2018-06-15 | mb/google/poppy/variants/nami: Update DPTF table from version 1.5 | John Su |
2018-06-14 | mb/google/poppy/variants/nocturne: config GPP_E2 for BT_DISABLE_L | Nick Vaccaro |