Age | Commit message (Expand) | Author |
2017-09-16 | mb/google/poppy: Add lens_focus property for OV13858 camera module | V Sowmya |
2017-09-15 | mb/google/poppy: enable AER for PCIe root port 0 | Rizwan Qureshi |
2017-09-13 | mb/google/soraka: Update DPTF parameters | Wisley Chen |
2017-09-13 | mb/google/soraka: Fine-tune USB 2.0 port4 | Wisley Chen |
2017-09-06 | mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codec | Harsha Priya |
2017-09-06 | mb/google/soraka: enable AER for PCIe root port 0 | Rizwan Qureshi |
2017-09-05 | mb/google/soraka: Camera PMIC run time power control | Naresh G Solanki |
2017-09-02 | mainboard/google/soraka: Remove wacom digitizer | Wisley Chen |
2017-08-30 | mainboard/google/soraka: Add stop gpio control to touchscreen device | Furquan Shaikh |
2017-08-30 | mainboard/google/soraka: Remove Atmel Touchscreen | Furquan Shaikh |
2017-08-29 | mainboard/google/soraka: Tune I2C params (hcnt, lcnt, hold time) | Furquan Shaikh |
2017-08-28 | mainboard/google/poppy: Tune I2C params (hcnt, lcnt, hold time) | Furquan Shaikh |
2017-08-25 | soc/intel/skylake: Add LPC and SPI lock down config option | Subrata Banik |
2017-08-21 | mainboard/google/poppy: Update VR config settings | Furquan Shaikh |
2017-08-21 | mainboard/google/poppy: Remove MPS IMPV8 workaround | Furquan Shaikh |
2017-08-17 | mainboard/google/poppy: Add ACPI objects for NVMEM device GT24C16S and CAT24C16 | V Sowmya |
2017-08-11 | mb/google/poppy: Update PL2 settings | Sumeet Pawnikar |
2017-08-04 | mainboard/google/poppy: Decrease link-frequencies for OV13858 and OV5670 | V Sowmya |
2017-08-04 | mainboard/google/soraka: Configure GPP_B8 in bootblock | Furquan Shaikh |
2017-08-04 | mainboard/google/soraka: Add gpio.c to bootblock | Furquan Shaikh |
2017-07-28 | mb/google/soraka: configure GPP_B8 to control WLAN_PE_RST | Rizwan Qureshi |
2017-07-27 | mainboard/google/poppy: Configure GPIO.1 and GPIO.2 for daisy chain mode | V Sowmya |
2017-07-24 | mainboard/google/soraka: pull high TOUCHSCREEN_STOP_L pin | Wisley Chen |
2017-07-23 | mainboard/google/{poppy,soraka}: Enable S0ix | Rajat Jain |
2017-07-22 | mainboard/google/poppy/variants/soraka: Update GPP_{D1,D2,B7} config | Furquan Shaikh |
2017-07-22 | mainboard/google/poppy/variants/soraka: Define separate gpio tables | Furquan Shaikh |
2017-07-13 | mainboard/google/soraka: add wacom touchscreen support | Wisley Chen |
2017-07-12 | mb/google/soraka: Do not reset PMIC during sleep | Naresh G Solanki |
2017-07-01 | mainboards: Remove unused EC event for thermal overload | Duncan Laurie |
2017-06-27 | mainboard/google/soraka: Update VR config settings | Rajneesh Bhardwaj |
2017-06-27 | mb/google/soraka: Remove MPS IMVP8 workaround | Rajneesh Bhardwaj |
2017-06-27 | mainboard/google/poppy: Update world facing camera sensor | V Sowmya |
2017-06-27 | mainboard/google/poppy: Add clock frequency for camera sensors | V Sowmya |
2017-06-20 | mb/google/poppy: Add camera devices power sequencing through ACPI power resou... | V Sowmya |
2017-06-20 | mb/google/poppy: Configure ports and endpoints for sensor and CIO2 devices | V Sowmya |
2017-06-19 | mb/google/poppy: Add MIPI camera support. | V Sowmya |
2017-06-19 | mainboard/google/{poppy,soraka}: Remove MIPI camera support from devicetree.cb | V Sowmya |
2017-06-19 | mb/google/poppy: Add option to disable TPM | Naresh G Solanki |
2017-06-14 | mainboard/google/{poppy,soraka}: Disable unused GSPI1 interface | Furquan Shaikh |
2017-06-14 | mainboard/google/{poppy,soraka}: Enable generation of SPI TPM ACPI node | Furquan Shaikh |
2017-06-14 | mainboard/google/poppy: Disable unused TPM interface dynamically | Furquan Shaikh |
2017-06-09 | mb/google/soraka: Update UF camera i2c address | Naresh G Solanki |
2017-06-07 | mainboard/google/poppy: Add support for ELAN device | Furquan Shaikh |
2017-06-04 | mb/google/poppy: Update camera sensor | Naresh G Solanki |
2017-06-01 | mainboard/google/poppy: Enable H1 I2C TPM | Furquan Shaikh |
2017-05-31 | mainboard/google/poppy: Power down camera rails when suspending | Furquan Shaikh |
2017-05-26 | mainboard/google/poppy: Add PowerResource for touchscreen device | Furquan Shaikh |
2017-05-24 | mb/google/soraka: Update camera sensor for soraka | Naresh G Solanki |
2017-05-24 | mb/google/poppy: Update SPD data | Naresh G Solanki |
2017-05-19 | mainboard/google/poppy/variants/soraka: Add SPD for K3QFAFA0CM-AGCF | Furquan Shaikh |
2017-05-19 | mainboard/google/poppy: Fix SPD for micron MT52L256M64D2PP-107 | Furquan Shaikh |
2017-05-17 | mainboard/google/poppy/variants/soraka: Enable H1 I2C TPM | Furquan Shaikh |
2017-05-17 | mainboard/google/poppy: Correct I2C bus number for TPM | Furquan Shaikh |
2017-05-05 | mb/google/poppy: Add eMMC as thermal sensor | Sumeet Pawnikar |
2017-05-05 | mainboard/google/poppy: Enable MODE_CHANGE event in SCI_MASK | Furquan Shaikh |
2017-05-03 | mainboard/google/poppy: Add support for cr50 I2C TPM | Furquan Shaikh |
2017-05-03 | mainboard/google/poppy: Update GPIO table for next build | Furquan Shaikh |
2017-04-28 | mainboard/google/soraka: Add support for memory configs 1,2,7 and 8 | Furquan Shaikh |
2017-04-28 | mainboard/google/poppy: Add SPDs for memory config 1 and 2 | Furquan Shaikh |
2017-04-28 | mainboard/google/poppy: Enable separate MRC cache for recovery mode | Furquan Shaikh |
2017-04-27 | google/poppy: Enable PD MCU device | Shamile Khan |
2017-04-24 | mainboard/google/poppy: use intel common tis_plat_irq_status() | Aaron Durbin |
2017-04-24 | Kconfig: provide MAINBOARD_HAS_TPM_CR50 option | Aaron Durbin |
2017-04-19 | mainboard/google/poppy/variants/soraka: add soraka board | YH Lin |
2017-04-19 | mainboard/google/poppy: Provide nhlt variant API | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Provide memory configuration variant API | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Provide cros_gpio variant API | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Add variant API for board_id and gpio | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Provide baseboard and variant concepts | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Prepare sharing directory for variants | Furquan Shaikh |
2017-04-19 | mb/google/poppy: Add camera support | V Sowmya |
2017-04-19 | mb/google/poppy: Add Image Processing Unit ASL | Sowmya |
2017-04-18 | mainboard/google/poppy: Clean up gpio.h file | Furquan Shaikh |
2017-04-18 | mainboard/google/poppy: Enable deep S3 in DC mode | Furquan Shaikh |
2017-04-13 | soc/intel/skylake: Split AC/DC settings for Deep Sx config | Duncan Laurie |
2017-04-13 | mainboard/google/poppy: Enable internal pull-down on USB_C{0,1}_DP_HPD | Furquan Shaikh |
2017-04-13 | mainboard/google/poppy: Add support for cr50 SPI TPM | Furquan Shaikh |
2017-04-05 | mainboard/google/poppy: Change SD card detect to GPP_E15 | Furquan Shaikh |
2017-03-28 | vboot: Move remaining features out of vendorcode/google/chromeos | Julius Werner |
2017-03-28 | vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by default | Julius Werner |
2017-03-21 | mainboard/google/poppy: Use sideband IRQ for SD Card Detect | Furquan Shaikh |
2017-03-17 | mainboard/google/poppy: Enable EC SW sync | Furquan Shaikh |
2017-03-16 | google/poppy: Use rt5663 interrupt as GpioInt instead of PIRQ | Rizwan Qureshi |
2017-03-15 | intel/skylake: Fix bug in VR configuration with FSP 2.0 | Duncan Laurie |
2017-03-12 | google/poppy: Enable internal pull-up on PWRBTN# | Shobhit Srivastava |
2017-03-09 | google/poppy: Configure SRCCLKREQ4 as No Connect | Naresh G Solanki |
2017-03-09 | mainboard/google/poppy: Enable cros_ec_keyb device | Furquan Shaikh |
2017-03-08 | mainboard/google/poppy: Add EC_HOST_EVENT_MODE_CHANGE to wakeup source | Furquan Shaikh |
2017-03-07 | google/poppy: fix finger print sensor interrupt gpio configuration | Rizwan Qureshi |
2017-03-02 | mainboard/google/poppy: Disable deep S3 on poppy | Furquan Shaikh |
2017-02-24 | mainboard/google/poppy: Change touchscreen IRQ to level-triggered | Furquan Shaikh |
2017-02-23 | mb/google/poppy: Enable support for DPTF | Sumeet Pawnikar |
2017-02-22 | acpi: Add ACPI_ prefix to IRQ enum and struct names | Furquan Shaikh |
2017-02-21 | mainboard/google/poppy: Enable Realtek 5663 support | Rizwan Qureshi |
2017-02-21 | mainboard/google/poppy: Enable Maxim MAX98927 codec | Rizwan Qureshi |
2017-02-21 | mainboard/google/poppy: Generate required nhlt table | Rizwan Qureshi |
2017-02-20 | drivers/i2c: Use I2C HID driver for wacom devices | Furquan Shaikh |
2017-02-20 | mainboard/{google,intel}: Change config option selection | Furquan Shaikh |
2017-02-17 | mainboard/poppy: select SOC_INTEL_KABYLAKE | Rizwan Qureshi |
2017-02-17 | mainboard/google/poppy: Generate digitizer node in SSDT | Furquan Shaikh |