| Age | Commit message (Expand) | Author |
|---|
| 2018-01-25 | mb/google/poppy/variants/nami: Enable elan touchpad wakeup system from S3/S0ix | Van Chen |
| 2018-01-23 | mb/google/poppy/variants/nami: Remove iccmax setting from devicetree | Furquan Shaikh |
| 2018-01-17 | mb/google/nautilus: Add MIPI camera asl files for IMX258 and DW9807 | Andy Yeh |
| 2018-01-17 | mb/google/poppy: Move PMIC specific objects to appropriate scope | Rizwan Qureshi |
| 2018-01-17 | mb/google/poppy: Split ports and endpoints config for CIO2 | Rizwan Qureshi |
| 2018-01-15 | mb/google/poppy/variants/nami: Enable elan touchpad | van_chen |
| 2018-01-12 | mb/google/poppy/variants/nami: Fix DA7219 IRQ issue | Kaiyen Chang |
| 2018-01-12 | mb/google/poppy: Remove digitizer reset control from ACPI | Furquan Shaikh |
| 2018-01-12 | mb/google/poppy/variants/nautilus: enable digitizer pen device | Seunghwan Kim |
| 2018-01-09 | mb/google/poppy: Add internal pull-up on pen eject signal | Furquan Shaikh |
| 2018-01-02 | mb/google/poppy/variants/nami: Add empty_ddr4.spd.hex for DDR4 | Kane Chen |
| 2017-12-22 | soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion support | Divya Chellap |
| 2017-12-20 | mb/google/poppy/variants/nautilus: Change USB2 phy setting | sh.kim |
| 2017-12-20 | mb/google/poppy/variants/nami: Add SPD files for nami | Furquan Shaikh |
| 2017-12-20 | mb/google/poppy: Enable speaker and codec for nami | Gaggery Tsai |
| 2017-12-19 | mb/google/poppy: Configure WWAN gpios | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy: Configure GPP_B0 for WLAN wake | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy: Configure pen reset and eject lines | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy/variants/nautilus: Enable AER and LTR for root port 1 | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy: Configure GPP_B8 for WLAN_PE_RST | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy/variants/nami: Fix SATA configs again | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy: Configure GPP_F3 as NC | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy/variants/nami: Fix GPIO configuration for DEVSLP | Furquan Shaikh |
| 2017-12-17 | mb/google/poppy/variants/nami: Fix SataMode configuration in devicetree | Furquan Shaikh |
| 2017-12-17 | mb/google/poppy/variants/nami: Fix GPIO config for PCH_SPK_EN | Furquan Shaikh |
| 2017-12-12 | mb/google/poppy/variants/nami: Implement variant_memory_params | Furquan Shaikh |
| 2017-12-11 | mb/google/poppy/variants/soraka: Tune I2C5 params | Furquan Shaikh |
| 2017-12-11 | google/nautilus: Add Maxim98357a support | Naveen Manohar |
| 2017-12-11 | mb/google/poppy/variants/nautilus: add SPK DMIC nhlt support | Naveen Manohar |
| 2017-12-07 | mb/google/poppy/variants/nami: Add support for nami board | Furquan Shaikh |
| 2017-12-07 | mb/google/poppy: Add support for DDR4 memory | Furquan Shaikh |
| 2017-12-07 | mb/google/poppy/variants/nautilus: Fix memory params | Furquan Shaikh |
| 2017-12-06 | mb/google/poppy: Remove variant_cros_gpios from variants | Furquan Shaikh |
| 2017-12-06 | mb/google/poppy: Add config option for camera ACPI support | Furquan Shaikh |
| 2017-12-06 | mb/google/poppy/variants/soraka: Disable SPI TPM | Furquan Shaikh |
| 2017-12-06 | mb/google/poppy: Disable SPI TPM | Furquan Shaikh |
| 2017-12-05 | mb/google/poppy,nautilus,soraka: Disable PD on AC_PRESENT in deep Sx | Furquan Shaikh |
| 2017-11-30 | mb/google/poppy/variants/nautilus: Disable DPTF | Furquan Shaikh |
| 2017-11-30 | mb/google/poppy/variants/soraka: Set PCH thermal trip point to 75 degreeC | Subrata Banik |
| 2017-11-30 | mb/google/nautilus: add synaptics touch screen support | Chris Wang |
| 2017-11-29 | mb/google/poppy/variants/nautilus: Disable camera devices | Furquan Shaikh |
| 2017-11-29 | mb/google/poppy: Add variant support for camera asl | Furquan Shaikh |
| 2017-11-28 | mb/google/poppy/variants/nautilus: set I2C speed to 400KHz | Chris Wang |
| 2017-11-28 | mb/google/poppy/variants/nautilus: Change IA/GT/SA slow slew rate settings | Chris Wang |
| 2017-11-28 | mb/google/soraka: configure WLAN_PE_RST gpio in early_gpio_table | Divya Chellap |
| 2017-11-28 | mb/google/poppy/variants/nautilus: correct the SIO_EC_ENABLE_P2SK typo | Chris Wang |
| 2017-11-28 | mb/google/poppy/variants/nautilus: remove ALS for nautilus | Chris Wang |
| 2017-11-09 | mb/google/{poppy,nautilus,soraka}: Disable deep S3 | Furquan Shaikh |
| 2017-11-07 | mb/google/poppy/variants/nautilus: Enable Dialog DA7219 support | Naveen Manohar |
| 2017-11-07 | mb/google/poppy/variants/nautilus: add nhlt support | Naveen Manohar |
| 2017-11-03 | soraka: update pad reset config of WLAN_PE_RST to RSMRST | Divya Chellap |
| 2017-11-03 | google/nautilus: enable elan touchpad support | Chris Wang |
| 2017-11-03 | google/nautilus: Update GPIO table | Chris Wang |
| 2017-11-03 | google/nautilus: add spd data by ram id | Chris Wang |
| 2017-10-19 | mb/google/poppy: Log EC events during S0ix resume | Furquan Shaikh |
| 2017-10-10 | mb/google/poppy/variants/nautilus: add nautilus board | Chris Wang |
| 2017-10-09 | skylake mainboards: Use PAD_CFG_GPI_GPIO_DRIVER instead of PAD_CFG_GPI | Furquan Shaikh |
| 2017-10-08 | mb/google/poppy/variants/soraka: Add 10ms reset delay for WCOM device | Furquan Shaikh |
| 2017-10-03 | mainboard/google/soraka: Reduce Wacom resume time | Rajneesh Bhardwaj |
| 2017-09-26 | mb/google/*: Use newly added Chrome EC boardid function | Furquan Shaikh |
| 2017-09-26 | soraka: Ensure I2C5 frequency is less than 400kHz | Furquan Shaikh |
| 2017-09-21 | mb/google/{poppy,soraka}: Enable LTR for Root port | Rizwan Qureshi |
| 2017-09-15 | mb/google/poppy: enable AER for PCIe root port 0 | Rizwan Qureshi |
| 2017-09-13 | mb/google/soraka: Update DPTF parameters | Wisley Chen |
| 2017-09-13 | mb/google/soraka: Fine-tune USB 2.0 port4 | Wisley Chen |
| 2017-09-06 | mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codec | Harsha Priya |
| 2017-09-06 | mb/google/soraka: enable AER for PCIe root port 0 | Rizwan Qureshi |
| 2017-09-05 | mb/google/soraka: Camera PMIC run time power control | Naresh G Solanki |
| 2017-09-02 | mainboard/google/soraka: Remove wacom digitizer | Wisley Chen |
| 2017-08-30 | mainboard/google/soraka: Add stop gpio control to touchscreen device | Furquan Shaikh |
| 2017-08-30 | mainboard/google/soraka: Remove Atmel Touchscreen | Furquan Shaikh |
| 2017-08-29 | mainboard/google/soraka: Tune I2C params (hcnt, lcnt, hold time) | Furquan Shaikh |
| 2017-08-28 | mainboard/google/poppy: Tune I2C params (hcnt, lcnt, hold time) | Furquan Shaikh |
| 2017-08-25 | soc/intel/skylake: Add LPC and SPI lock down config option | Subrata Banik |
| 2017-08-21 | mainboard/google/poppy: Update VR config settings | Furquan Shaikh |
| 2017-08-21 | mainboard/google/poppy: Remove MPS IMPV8 workaround | Furquan Shaikh |
| 2017-08-11 | mb/google/poppy: Update PL2 settings | Sumeet Pawnikar |
| 2017-08-04 | mainboard/google/soraka: Configure GPP_B8 in bootblock | Furquan Shaikh |
| 2017-08-04 | mainboard/google/soraka: Add gpio.c to bootblock | Furquan Shaikh |
| 2017-07-28 | mb/google/soraka: configure GPP_B8 to control WLAN_PE_RST | Rizwan Qureshi |
| 2017-07-24 | mainboard/google/soraka: pull high TOUCHSCREEN_STOP_L pin | Wisley Chen |
| 2017-07-23 | mainboard/google/{poppy,soraka}: Enable S0ix | Rajat Jain |
| 2017-07-22 | mainboard/google/poppy/variants/soraka: Update GPP_{D1,D2,B7} config | Furquan Shaikh |
| 2017-07-22 | mainboard/google/poppy/variants/soraka: Define separate gpio tables | Furquan Shaikh |
| 2017-07-13 | mainboard/google/soraka: add wacom touchscreen support | Wisley Chen |
| 2017-07-01 | mainboards: Remove unused EC event for thermal overload | Duncan Laurie |
| 2017-06-27 | mainboard/google/soraka: Update VR config settings | Rajneesh Bhardwaj |
| 2017-06-27 | mb/google/soraka: Remove MPS IMVP8 workaround | Rajneesh Bhardwaj |
| 2017-06-19 | mainboard/google/{poppy,soraka}: Remove MIPI camera support from devicetree.cb | V Sowmya |
| 2017-06-14 | mainboard/google/{poppy,soraka}: Disable unused GSPI1 interface | Furquan Shaikh |
| 2017-06-14 | mainboard/google/{poppy,soraka}: Enable generation of SPI TPM ACPI node | Furquan Shaikh |
| 2017-06-09 | mb/google/soraka: Update UF camera i2c address | Naresh G Solanki |
| 2017-06-07 | mainboard/google/poppy: Add support for ELAN device | Furquan Shaikh |
| 2017-06-04 | mb/google/poppy: Update camera sensor | Naresh G Solanki |
| 2017-06-01 | mainboard/google/poppy: Enable H1 I2C TPM | Furquan Shaikh |
| 2017-05-31 | mainboard/google/poppy: Power down camera rails when suspending | Furquan Shaikh |
| 2017-05-26 | mainboard/google/poppy: Add PowerResource for touchscreen device | Furquan Shaikh |
| 2017-05-24 | mb/google/soraka: Update camera sensor for soraka | Naresh G Solanki |
| 2017-05-19 | mainboard/google/poppy/variants/soraka: Add SPD for K3QFAFA0CM-AGCF | Furquan Shaikh |
| 2017-05-17 | mainboard/google/poppy/variants/soraka: Enable H1 I2C TPM | Furquan Shaikh |
