summaryrefslogtreecommitdiff
path: root/src/mainboard/google/poppy/variants/soraka
AgeCommit message (Collapse)Author
2017-10-09skylake mainboards: Use PAD_CFG_GPI_GPIO_DRIVER instead of PAD_CFG_GPIFurquan Shaikh
Change 1760cd3e (soc/intel/skylake: Use common/block/gpio) updated all skylake boards to use common gpio driver. Common gpio code defines PAD_CFG_GPI without GPIO_DRIVER ownership. However, for skylake PAD_CFG_GPI set GPIO_DRIVER ownership by default. This resulted in Linux kernel failing to configure all GPIO IRQs since the ownership was not set correctly. (Observed error in dmesg: "genirq: Setting trigger mode 3 for irq 201 failed (intel_gpio_irq_type+0x0/0x110)") This change fixes the above issue by replacing all uses of PAD_CFG_GPI in skylake mainboards to PAD_CFG_GPI_GPIO_DRIVER. BUG=b:67507004 TEST=Verified on soraka that the genirq error is no longer observed in dmesg. Also, cat /proc/interrupts has the interrupts configured correctly. Change-Id: I7dab302f372e56864432100a56462b92d43060ee Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-08mb/google/poppy/variants/soraka: Add 10ms reset delay for WCOM deviceFurquan Shaikh
Change 868b3761 (mainboard/google/soraka: Reduce Wacom resume time) removed the delay after taking device out of reset since it seemed unnecessary in system resume case (because there is enough time after taking device out of reset and before communication with device starts). However, without the delay, kernel driver runs into issue while talking to the device during boot-up and runtime suspend/resume. (Observed this error in dmesg: "i2c_hid i2c-WCOMCOHO:00: failed to change power setting."). Thus, add 10ms delay after taking device out of reset. Verified on multiple Soraka system that with 10ms delay, kernel driver does not run into any issue talking to the WCOM device during boot-up, runtime suspend/resume and system suspend/resume. BUG=b:65358919 TEST=No more errors talking to WCOM device in kernel dmesg. Change-Id: I485b753cbae4b653e74337e048aea4d26ffdbb81 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rajat Jain <rajatja@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-03mainboard/google/soraka: Reduce Wacom resume timeRajneesh Bhardwaj
Currently the WCOMCOHO registers a reset delay of 110ms to execute their _ON_ asl power on method. This seems to be correct as per WACOM product design specifications but it introduces an unwanted delay in overall system resume time. This delay should be removed from ACPI critical path since the entire kernel resume gets blocked on this sleep call unless this is over. In the kernel I2C communication with WACOM driver starts with the resume callbacks of I2C HID driver which gets triggered after display is completely resumed. The display resume process takes at least 230ms so it's safe to reduce the delay from coreboot and unblock the critical ACPI path. BUG=b:65358919 BRANCH=None TEST=manual testing on Soraka board to ensure that touchscreen works at boot and after suspend/resume. Also verify that the overall S3 resume time is reduced by 110ms. Change-Id: I59d070977a95316414018af69d5b43e3147ccf4e Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Reviewed-on: https://review.coreboot.org/21692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-26soraka: Ensure I2C5 frequency is less than 400kHzFurquan Shaikh
Update I2C5 bus parameters to obtain clock frequency <400kHz. BUG=b:65062416 TEST=Verified using an oscilloscope that I2C5 bus frequency in factory is ~397kHz. Change-Id: I3d0b0388343d4c6c5e7eabf3e06799d059307517 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-21mb/google/{poppy,soraka}: Enable LTR for Root portRizwan Qureshi
Enable LTR for Root port 0, where wifi card is connected. BUG=b:65570878 TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported by AER driver for root port 0. Change-Id: I222a87fe2094c8424760ccf578e32b9ac042f014 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajat Jain <rajatja@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-13mb/google/soraka: Update DPTF parametersWisley Chen
Cloned from baseboard/dptf.asl and update the parameters for soraka. 1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points. CPU: passive point:85, critial point:100 TSR0: passive point:55, critial point:65 TSR1: passive point:58, critial point:70 TSR2: passive point:60, critial point:75 TSR3: passive point:60, critial point:75 2. Set PL1 Max to 7W, and PL1 Min 4.5W 3. Change sampling period of thermal relationship table (TRT) setting CPU: 5 seconds TSR0: 30 seconds TSR1: 30 seconds TSR2: 8 seconds TSR3: 8 Seconds BUG=b:65467566 TEST=build, boot on soraka, and verified by thermal team. Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I6af93fa358a037df2088213ee4df5e2cfd047590 Reviewed-on: https://review.coreboot.org/21453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-13mb/google/soraka: Fine-tune USB 2.0 port4Wisley Chen
Fine tune usb 2.0 strength for port 4 to pass eye diagram. BUG=b:65306272 TEST=build on soraka, measure usb2.0 eye diagram, and result is pass. Change-Id: I2c79e96e2e3dea1364d7b71af19b57f4c9307fcb Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-06mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codecHarsha Priya
This patch adds imon and vmon slot numbers for Maxim 98927 driver. These values are used to confiure IV feedback for audio playback on speakers. BUG=b:36724448 TEST=After boot, the register dump for Max98927 codecs should have imon and vmon slots numbers set in 0x1e register. Change-Id: I4382da4f984507d147751c168e8177b58c88a70f Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/21196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-06mb/google/soraka: enable AER for PCIe root port 0Rizwan Qureshi
Enable PCIe Advanced Error Reporting for PCIe root port 0. Change-Id: I76742801e84449d0910ddadf31d39597df3263b9 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-05mb/google/soraka: Camera PMIC run time power controlNaresh G Solanki
Currently PMIC (tps68470) is in active state even when cameras are not in use. PMIC is put into SLEEP mode only when entering S3 via smihandler. With this change PMIC will be put into SLEEP mode as soon as sensors & VCM voltage outputs are turned off. This will allow run time power saving when camera is not in use. PMIC will be reset in first boot & across S3 & S0ix cycles. Also, remove the smi handler for PMIC power management & handle it as part of sensor and VCM ACPI PowerResource. BUG=b:63903239 TEST= Build for Soraka. Check Camera probe, Capture image across S3 & S0ix cycles. Also checked the following & found no regression: 1. Typical camera use cases 2. Stability tests related to camera 3. Reliability tests related to camera 4. PnP tests related to camera 5. Latency related tests with camera Change-Id: I23b0c0a887c9eb5d29b89f14aebba273b01228e0 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-02mainboard/google/soraka: Remove wacom digitizerWisley Chen
We have no wacom digitizer on I2C#3, so remove it. TEST=build and boot on soraka. Change-Id: I3f5a1b9ece6fc9a9443477c7a7aa77dbcdf6a703 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21309 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-30mainboard/google/soraka: Add stop gpio control to touchscreen deviceFurquan Shaikh
BUG=b:64987428 TEST=Verified that touchscreen works on boot-up and after suspend/resume. No power leakage via stop gpio in suspended state. Change-Id: Ia260eb444081dbe1646c90e82c2725661e7306bc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-30mainboard/google/soraka: Remove Atmel TouchscreenFurquan Shaikh
We no longer use this touchscreen device, so get rid of it. BUG=b:64987428 Change-Id: I67af787d231317a80998fb483eed5674de19aeb4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-29mainboard/google/soraka: Tune I2C params (hcnt, lcnt, hold time)Furquan Shaikh
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the frequency does not exceed 400KHz. BUG=b:35948024 TEST=Verified for 25 iterations that the frequency on each bus ranges <= 400KHz. I2C0: 393 - 397 I2C1: 393 - 400 I2C2: 392 - 400 I2C4: 392 - 400 I2C5: 392 - 400 Change-Id: I3e12c75eb7e82a83aa6a6bcfcc11c12f83f2d3d4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-11mb/google/poppy: Update PL2 settingsSumeet Pawnikar
Update PL2 override setting to 15W as per KBL Power Arch Guide. Change-Id: I4a6f875f8c3bdb012d6ff97c1429f32db5210893 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/20943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-04mainboard/google/soraka: Configure GPP_B8 in bootblockFurquan Shaikh
GPP_B8 acts as input to the inverter whose output controls PERST# signal to wifi module. Out of reset, GPP_B8 is configured as input by default. Since there is no external pull-down on it, this line is floating and results in PERST# being asserted until ramstage where the GPIO was originally configured. Because of this the wifi chip is not ready during the PCIe initialization step. Move the configuration of GPP_B8 to bootblock so that wifi device is taken out of reset as early as possible. BUG=b:64181150,b:62726961 TEST=Verified with warm reboot and suspend-resume stress test that wifi is still functional. Change-Id: I68e1bd67499262a17daade72e9a9fd32934a184d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-04mainboard/google/soraka: Add gpio.c to bootblockFurquan Shaikh
Add gpio.c to bootblock so that the variant early_gpio_table can be used for configuration in bootblock. BUG=b:64181150,b:62726961 Change-Id: I77181334257f2fd19982ecafc1f58afe912f4280 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-28mb/google/soraka: configure GPP_B8 to control WLAN_PE_RSTRizwan Qureshi
WLAN_PE_RST control was moved from EC to SoC, it connected to GPP_B8. Configure GPP_B8 to drive low. TEST=Wifi card is detected and connect to an AP. Change-Id: I6a6ea0ddefe8402284fe37665864c7a1961cbc15 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/20804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-24mainboard/google/soraka: pull high TOUCHSCREEN_STOP_L pinWisley Chen
After updating to Wacom Firmware version 501, touchscreen can't work. Wacom FW (ver. 501) enables STOP function. STOP Pin: High: Normal Operation Low: Stop Scanning So pull TOUCHSCREEN_STOP_L high BUG=b:37007801, b:37265219 BRANCH=none TEST=manual testing on Soraka board and touchscreen works at boot and after suspend/resume. Change-Id: I8a2bdce1554fd99dea30cf91fa48d0529f40b7b0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/20664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-23mainboard/google/{poppy,soraka}: Enable S0ixRajat Jain
Enable S0ix for poppy and soraka in their device trees respectively. BUG=b:36630881 BRANCH=none TEST=Verified S0ix and S3 operation on Poppy and Soraka (250+ iterations). Change-Id: I9ba91499e54f729970448af6f71804ad5b3cb836 Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-22mainboard/google/poppy/variants/soraka: Update GPP_{D1,D2,B7} configFurquan Shaikh
GPP_B7, GPP_D1 and GPP_D2 are not used going forward. Mark them as NC in gpio table. BUG=b:62322846,b:62240755 Change-Id: I7aee08314e6ce96d5913ae315bf75f5c04ab7370 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20672 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-22mainboard/google/poppy/variants/soraka: Define separate gpio tablesFurquan Shaikh
Now that soraka is starting to deviate from the baseboard w.r.t. gpio settings, make a new copy of gpio table before we make any variant-specific changes in it. BUG=b:62240755,b:62322846 BRANCH=None TEST=Verified with gpio_debug=1 in skylake/gpio.c that the gpio configuration before and after this change remains same. Change-Id: I448d18f18b63e9bfb739c518d599de3b9b602dc2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13mainboard/google/soraka: add wacom touchscreen supportWisley Chen
Add wacom touchscreen support. BUG=b:37007801, b:37265219 BRANCH=None TEST=manual testing on Soraka board to ensue that touchscreen works at boot and after suspend/resume. Change-Id: I0fbae4782c6442149cda57d23c61ed87546621bb Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/20476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-27mainboard/google/soraka: Update VR config settingsRajneesh Bhardwaj
Update Psi2Threshold, IccMax, AcLoadline, DcLoadline VR config settings as per board design. BUG=b:62063434 BRANCH=none TEST=Build and boot soraka. Change-Id: I254bbb88b82ddf278f0ec71bc98873df1d5e0d27 Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: G Naveen <naveen.g@intel.com> Reviewed-on: https://review.coreboot.org/20309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-27mb/google/soraka: Remove MPS IMVP8 workaroundRajneesh Bhardwaj
Soraka uses MPS2949 IMVP8 controller and does not need the VR workaroud similar to Eve. BUG=None TEST=Build & boot on soraka. Ensure IMVP8 controller goes to low power mode in S3 and S0ix by measuring power. Change-Id: Ib98bb709ecc9e362a5cef437e7319e41f398a73b Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Reviewed-on: https://review.coreboot.org/20255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-19mainboard/google/{poppy,soraka}: Remove MIPI camera support from devicetree.cbV Sowmya
Remove MIPI camera related register entries from devicetree.cb. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy and soraka. Change-Id: Ic6a6a98d4c8ed6cba760eae5fd87bc2a3f15d7d2 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/19619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-14mainboard/google/{poppy,soraka}: Disable unused GSPI1 interfaceFurquan Shaikh
TEST=Verified that board still boots to OS without any error. Change-Id: I02d2a6cbcab92766a35993bfd20aaeed4ca22c90 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-14mainboard/google/{poppy,soraka}: Enable generation of SPI TPM ACPI nodeFurquan Shaikh
Now that we dynamically disable TPM interface based on config options, add support for generation of SPI TPM ACPI node if SPI TPM is used. Change-Id: I87d28a42b48ba916c70e45a061c5efd91a8a59bf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09mb/google/soraka: Update UF camera i2c addressNaresh G Solanki
Update user facing camera i2c address to 0x36. BUG=None TEST=Build & boot on soraka. Make sure user facing camera is detected. Change-Id: I4645ae5734faef4b6a821c04ab817a7b99da6e4b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-05-26mainboard/google/poppy: Add PowerResource for touchscreen deviceFurquan Shaikh
1. Do not enable touchscreen device by default in gpio configuration. 2. Select use of PowerResource for touchscreen device in devicetree so that the ACPI subsystem can take care of powering on/off the device. When system enters suspend, touchscreen device is powered off and on resume, it is powered back on. BUG=b:62028489 TEST=Verified 100 cycles of suspend-resume. Touchscreen still works on poppy. Change-Id: Ia0bebc7259b10cc60a9fa5b53542dfdd9685663e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19829 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-24mb/google/soraka: Update camera sensor for sorakaNaresh G Solanki
Soraka uses OV 13858 sensor. Hence update the same. Change-Id: I4dd39a25da47e379cca3f8748250b3ce1ff61e50 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-19mainboard/google/poppy/variants/soraka: Add SPD for K3QFAFA0CM-AGCFFurquan Shaikh
BUG=b:37712455 Change-Id: Ia3d13ac7c18be8fa92603b6501a2e5df476adcf0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19766 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-17mainboard/google/poppy/variants/soraka: Enable H1 I2C TPMFurquan Shaikh
1. Add a separate devicetree file for soraka variant and add H1 node. 2. Enable H1 TPM for soraka. BUG=b:36265511 Change-Id: Id9947dce9b7f755971f0199f043af8d251d275ab Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19519 Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-04-28mainboard/google/soraka: Add support for memory configs 1,2,7 and 8Furquan Shaikh
BUG=b:37712455 Change-Id: I3209aaef774712edab5e9f656ee84bfb6917b1c1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19472 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-19mainboard/google/poppy/variants/soraka: add soraka boardYH Lin
Create Soraka board which derives from Poppy, a KBL reference board. More Soraka specific changes need to be done later on. BRANCH=master BUG=b:36995255 TEST=Build (as initial setup) Change-Id: I8af68d2cf475df56336aa0e3bebe86a54ece1999 Signed-off-by: YH Lin <yueherngl@chromium.org> Reviewed-on: https://review.coreboot.org/19343 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-21 10:46:25 +0000