summaryrefslogtreecommitdiff
path: root/src/mainboard/google/poppy/variants/nocturne
AgeCommit message (Expand)Author
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
2020-08-08soc/intel/skylake: Enable CIO depending on devicetree configurationFelix Singer
2020-08-08soc/intel/skylake: Enable SA IMGU depending on devicetree configurationFelix Singer
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable TraceHub depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable LAN depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable SATA depending on devicetree configurationFelix Singer
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
2020-04-06mb/google/poppy: Use SPDX for GPL-2.0-only filesAngel Pons
2020-04-02mb/google/poppy: Add support for ACPI brightness controlsMatt DeVillier
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2019-12-12mb/google/nocturne: adjust VBT boot resolutionMatt DeVillier
2019-12-02mb/google/poppy: add VBTs for remaining variantsMatt DeVillier
2019-10-27mb/google/poppy/variant/nocturne: don't invert GPP_D17Nick Vaccaro
2019-10-02soc/intel: Replace config_of_path() with config_of_soc()Kyösti Mälkki
2019-09-10mb/google/poppy/variant/nocturne: add EC_SYNC_GPIONick Vaccaro
2019-08-02soc/intel/skylake: Make use of common thermal code for SKLSubrata Banik
2019-07-21soc/intel: Expand SA_DEV_ROOT for ramstageKyösti Mälkki
2019-07-19google/nocturne: Add MKBP events as a wake sourceAseda Aboagye
2019-07-18soc/intel: Use config_of_path(SA_DEVFN_ROOT)Kyösti Mälkki
2019-07-09arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-classKyösti Mälkki
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
2019-03-01soc/intel/skylake: Unify serial IRQ optionsNico Huber
2019-02-18soc/intel/skylake: Use real common code for VMX initNico Huber
2019-01-03src/mainboard: Use smm-$(CONFIG_HAVE_SMI_HANDLER)Elyes HAOUAS
2018-12-20Revert "mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSD"Jenny TC
2018-12-04mb/google/poppy/variant/nocturne: adjust RcompTarget to fix DRAM corruptionNick Vaccaro
2018-12-03mb/google/poppy/variant/nocturne: increase touch panel power-on delayNick Vaccaro
2018-11-22mb/google/poppy/variant/nocturne: enable USB acpiNick Vaccaro
2018-11-16mb/google/poppy/variant/nocturne: Configure GPP_E1 for WLAN_WAKE_LNick Vaccaro
2018-11-08mb/google/poppy/variant/nocturne: configure SAR irqs to use PLTRSTNick Vaccaro
2018-11-08mb/google/poppy/variant/nocturne: use PLTRST for GPP_C11Nick Vaccaro
2018-11-05mb/google/poppy/variant/nocturne: add Nanya memory optionNick Vaccaro
2018-10-24mb/google/poppy/var/nocturne: Use CRFP as device name for FP deviceFurquan Shaikh
2018-10-23mb/google/poppy: add the smi_events backZhuohao Lee
2018-10-22mb/google/poppy/var/nocturne: Change IMX319 sensor link freqLijian Zhao
2018-10-17mb/google/poppy/variants/nocturne: Disable pull-down of GPP_E9/E10Roy Mingi Park
2018-10-17mb/google/poppy/variants/nocturne: Tune DPTF settings for CPUSumeet R Pawnikar
2018-10-11mb/google/poppy/var/nocturne: Provide override for ec eventinfoFurquan Shaikh
2018-10-08mb/google/poppy/variant/nocturne: correct wifi wake registerNick Vaccaro
2018-10-08mb/google/poppy/variant/nocturne: Disable WAKE# signalNick Vaccaro
2018-10-06mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSDFurquan Shaikh
2018-10-04mb/google/poppy/variant/nocturne: update GPIO configurationNick Vaccaro
2018-10-04mb/google/poppy/variant/nocturne: increase touchscreen reset delayNick Vaccaro
2018-10-04mb/google/nocturne: Define GPP_D17 as EC_SYNC_IRQDuncan Laurie
2018-09-26mb/google/poppy/variants/nocturne: Update PowerLimit1 maximum valueSumeet Pawnikar
2018-09-26mb/google/poppy/variants/nocturne: Add tdp_pl1_override valueSumeet Pawnikar
2018-09-26mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
2018-09-21mb/google/poppy/variant/nocturne: set DMIC1 to NCNick Vaccaro
2018-09-20mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
2018-09-10mb/google/poppy: Set UPD CmdTriStateDis for NocturneShaunak Saha
2018-09-06mb/google/poppy/variants/nocturne: Enable DMIC CLK0/DATA0Sathyanarayana Nujella
2018-08-27mb/google/poppy/variants/nocturne: Update DPTF parametersTodd Broch
2018-08-23mb/google/poppy/variants/nocturne: enable "Base Attached Switch" deviceDmitry Torokhov
2018-08-20mb/google/poppy/variants/nocturne: enable eistMatt Delco
2018-08-20nocturne: Enable debouncing of SX9310 CLOSE / FAR IRQsEnrico Granata
2018-08-15mb/google/poppy/variants/nocturne: remove dup'ed dptf_enableMatt Delco
2018-08-15mb/google/poppy/variants/nocturne: sx9310 to 400kbMatt Delco
2018-08-14mb/google/poppy/variants/nocturne: Update PL1/PL2 for AMLRoy Mingi Park
2018-08-13mb/google/poppy/variants/nocturne: remove icc_max overridesNick Vaccaro
2018-08-13mb/google/poppy/variant/nocturne: update PL2 based on CPU skuNick Vaccaro
2018-07-30mainboard/google/nocturne: simplify camera power referencesMatt Delco
2018-07-30mb/google/poppy/variants/nocturne: enable FPMCU powerNick Vaccaro
2018-07-30mb/google/poppy/variants/nocturne: enable ec host event wakeNick Vaccaro
2018-07-26nocturne: configure VR per Intel recommendationPratik Prajapati
2018-07-26mb/google/poppy/variants/nocturne: enable p-statesPratik Prajapati
2018-07-20mb/google/poppy/variants/nocturne: set nvme to use clk src 3Nick Vaccaro
2018-07-12mainboard/google/nocturne: Update GPIO_FCAM_PWR_ENRicky Liang
2018-07-11skylake: Remove "IshEnable"li feng
2018-07-06mb/google/poppy/variants/nocturne: fix FPMCU IRQ sensitivityVincent Palatin
2018-07-02mainboard/google/nocturne: Enable IPU3Lijian Zhao
2018-07-02mainboard/google/nocturne: Set camera power sequenceLijian Zhao
2018-07-02mainboard/google/nocturne: Enable camera sensorsLijian Zhao
2018-07-02nocturne: Do not set 4 LSB of SX9310 CRTL0Gwendal Grignou
2018-07-02nocturne: Fix casing for register definitionGwendal Grignou
2018-06-28nocturne: Fix uid and desc for sx9310Enrico Granata
2018-06-28mb/google/poppy/variants/nocturne: Update TSR sensor infoSumeet Pawnikar
2018-06-22mb/google/poppy/variants/nocturne: Hook up the SX9310 proximity sensor.Enrico Granata
2018-06-21mb/google/poppy/variants/nocturne: add two new memory optionsNick Vaccaro
2018-06-21mb/google/poppy/variants/nocturne: Update Slave Addresses of Max98373 Amp'sSathyanarayana Nujella
2018-06-21mb/google/poppy/variants/nocturne: disable p-statesNick Vaccaro
2018-06-14mb/google/poppy/variants/nocturne: config GPP_E2 for BT_DISABLE_LNick Vaccaro
2018-06-14mb/google/poppy/variants/nocturne: config GPP_B4 for FCAM_PWR_ENNick Vaccaro
2018-06-11mb/google/poppy/variants/nocturne: enable nvmeNick Vaccaro
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
2018-06-05soc/intel/skylake: Add option to skip coreboot MP initSubrata Banik
2018-05-31mb/google/poppy/variants/nocturne: configure the FPMCU interfaceVincent Palatin
2018-05-23mb/google/poppy/variants/nocturne: enable MKBPNick Vaccaro
2018-05-23mb/google/poppy/variants/nocturne: enable I2C #5 busNick Vaccaro
2018-05-23mb/google/poppy/variants/nocturne: deassert audio amp resetNick Vaccaro
2018-05-23mb/google/poppy/variants/nocturne: add touchscreen register infoNick Vaccaro