summaryrefslogtreecommitdiff
path: root/src/mainboard/google/poppy/smihandler.c
AgeCommit message (Collapse)Author
2018-06-06mb/google/poppy/variants/nami: Fix Elan touchscreen power off sequenceShelley Chen
Power off does not seem to use the ACPI _OFF function, but rather the smihandler. Creating variant_smi_sleep function for nami to handle the power off sequence during reboot/power off. BUG=b:78311818 BRANCH=None TEST=Run "poweroff" command from AP console with SMI_DEBUG enabled Make sure delays are consistent with spec Change-Id: Ifeea545fe268be249793b3e508c51f5e4c1a3460 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-19mb/google/poppy: Log EC events during S0ix resumeFurquan Shaikh
This change adds support for logging EC events during S0ix resume. BUG=b:67874513 TEST=Verified that EC events are correctly logged during S0ix resume: 284 | 2017-10-16 20:45:12 | S0ix Enter 285 | 2017-10-16 20:45:16 | S0ix Exit 286 | 2017-10-16 20:45:16 | Wake Source | Power Button | 0 287 | 2017-10-16 20:45:16 | EC Event | Power Button 288 | 2017-10-16 20:45:35 | S0ix Enter 289 | 2017-10-16 20:45:40 | S0ix Exit 290 | 2017-10-16 20:45:40 | Wake Source | GPIO | 112 291 | 2017-10-16 20:45:40 | EC Event | Lid Open 292 | 2017-10-16 20:50:51 | S0ix Enter 293 | 2017-10-16 20:50:59 | S0ix Exit 294 | 2017-10-16 20:50:59 | Wake Source | GPIO | 112 295 | 2017-10-16 20:50:59 | EC Event | Mode change Change-Id: I9f6dcb8852d94ebf90bb5b63a17fde524d58d49f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-05mb/google/soraka: Camera PMIC run time power controlNaresh G Solanki
Currently PMIC (tps68470) is in active state even when cameras are not in use. PMIC is put into SLEEP mode only when entering S3 via smihandler. With this change PMIC will be put into SLEEP mode as soon as sensors & VCM voltage outputs are turned off. This will allow run time power saving when camera is not in use. PMIC will be reset in first boot & across S3 & S0ix cycles. Also, remove the smi handler for PMIC power management & handle it as part of sensor and VCM ACPI PowerResource. BUG=b:63903239 TEST= Build for Soraka. Check Camera probe, Capture image across S3 & S0ix cycles. Also checked the following & found no regression: 1. Typical camera use cases 2. Stability tests related to camera 3. Reliability tests related to camera 4. PnP tests related to camera 5. Latency related tests with camera Change-Id: I23b0c0a887c9eb5d29b89f14aebba273b01228e0 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-12mb/google/soraka: Do not reset PMIC during sleepNaresh G Solanki
1. Due to reset signal, PMIC loses its internal register state. This causes PMIC to be in improper state after sleep. 2. The intent of reset signal is to reset internal state of PMIC (which happens once during power on), hence avoid asserting reset signal when not needed. 3. As per PMIC (TPS68470) datasheet, device can be kept in SLEEP mode when not in use to save max possible power. To fix the same, do not reset PMIC while entering sleep. By keeping PMIC in SLEEP mode, Power consumption is < 1uW (Typ) upto 3.63uW (Max). Refs: TPS68470 datasheet. Measured value: 0.66uW TEST= Build the firmware for Soraka & boot to OS. Do S3 resume & check whether PMIC internal registers state are preserved. Change-Id: I93ce4d76b0376b64ae6d1067aca0fd7467af3582 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-31mainboard/google/poppy: Power down camera rails when suspendingFurquan Shaikh
BUG=b:62147763 Change-Id: Iba88fed972b847448e01fcfca8c7129d950244c2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-19mainboard/google/poppy: Provide baseboard and variant conceptsFurquan Shaikh
In order to be able to share code across different poppy variants, provide the concept of baseboard and variants. New directory layout: variants/baseboard - code variants/baseboard/include/baseboard - headers variants/poppy - code variants/poppy/include/variant - headers New boards would then add themselves under their board name within "variants" directory. This is purely an organizational change. BUG=b:37375693 Change-Id: If6c1c5f479cfffe768abf27495d379744104e2dc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19322 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-19google/poppy: Add new boardFurquan Shaikh
Add poppy board files using kabylake and FSP 2.0. BUG=chrome-os-partner:60713 BRANCH=None TEST=Compiles successfully Change-Id: Ic9aa5093b319690ae893a21cab98d9b843000e6c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>