summaryrefslogtreecommitdiff
path: root/src/mainboard/google/octopus
AgeCommit message (Expand)Author
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
2019-01-14mb/google/octopus/variants: Configure PLT_RST_L pad IOSSTATE maskedJohn Zhao
2019-01-14mb/google/octopus/variants: Disable xHCI compliance modeJohn Zhao
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
2019-01-10mainboard/google/octopus: configure EC_AP_INT_ODLJett Rink
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
2019-01-02mb/google/octopus/variants: Add 20ms reset delay for WACOM deviceMarco Chen
2018-12-29mb/google/octopus: Override emmc DLL values for FleexBora Guvendik
2018-12-28mb/google/octopus: Override emmc DLL values for PhaserBora Guvendik
2018-12-24Revert "mb/google/octopus/variants/fleex: Update Charger throttling settings"Sumeet Pawnikar
2018-12-22Revert "mb/google/octopus: Add custom SAR values for Bobba"Justin TerAvest
2018-12-19mb/google/octopus: Override emmc DLL values for YorpBora Guvendik
2018-12-19mb/google/octopus/var/ampton: Tune I2C AudioJustin TerAvest
2018-12-17mb/google/octopus/variants/fleex: Update Charger throttling settingsSumeet Pawnikar
2018-12-17mb/google/octopus: Add custom SAR values for BobbaJustin TerAvest
2018-12-14mb/google/octopus: Override emmc DLL values for BobbaBora Guvendik
2018-12-12mb/google/octopus/ampton: Fix the TRACKPAD_INT_ODL GPIO configurationKarthikeyan Ramasubramanian
2018-12-11mb/google/octopus/variants/meep: Add 20ms reset delay for WACOM deviceTony Huang
2018-12-10mb/google/octopus: Update the PEN_EJECT GPIO configurationKarthikeyan Ramasubramanian
2018-12-09mb/google/octopus/phaser: Fix trackpad GPE wake configurationKarthikeyan Ramasubramanian
2018-12-03mb/google/octopus: Enable mode change as wake source from S3/S0ixFurquan Shaikh
2018-11-30cpu/intel/common: Use a common acpi/cpu.asl fileArthur Heymans
2018-11-29mb/google/octopus: Create Casta variantKarthikeyan Ramasubramanian
2018-11-27mb/google/octopus/var/phaser: Deprecate board id 0Furquan Shaikh
2018-11-27mainboard/google/octopus/variants/ampton: Decrease I2C CLK frequencyCarl Yang
2018-11-27mb/google/octopus/var/bobba: Deprecate board id < 2Furquan Shaikh
2018-11-27mb/google/octopus/var/fleex: Deprecate bid 0Furquan Shaikh
2018-11-27mb/google/octopus: Update GPIO_178 in early_gpio_table in baseboardFurquan Shaikh
2018-11-27mb/google/octopus: Configure all debug header lines as NCFurquan Shaikh
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
2018-11-21mb/google/octopus: Update TSR1 threshold settingsSumeet Pawnikar
2018-11-16mb/google/octopus/variants/bobba: Set tcc offset for bobbaSumeet Pawnikar
2018-11-16mb/google/octopus: override smbios manufacturer name from CBIWisley Chen
2018-11-12mb/google/octopus/var/bobba: Configure EC_SYNC IRQ as level-triggeredFurquan Shaikh
2018-11-12mb/google/octopus/variants/fleex: Set up tcc offset for fleexJohn Su
2018-11-08mb/google/octopus/variants/baseboard: Improve cold boot and S3 resumeJohn Zhao
2018-11-05mb/google/octopus/var/bobba: Define GPIO_134 as EC_SYNC_IRQEnrico Granata
2018-10-24mb/google/octopus/variants/fleex: Update DPTF parametersJohn Su
2018-10-24mb/google/octopus: Use DIMM_INFO_PART_NUMBER_SIZE for part_num_storeFurquan Shaikh
2018-10-23mb/google/octopus: Use a single GPIO for trackpad wake and IRQFurquan Shaikh
2018-10-19mb/google/octopus: Preserve MRC training data across firmware updateFurquan Shaikh
2018-10-11mb/google/octopus: I2C clock tuning for meepWisley Chen
2018-10-10mb/google/octopus: Drop I2C bus 0 clock frequency for Phaserpeichao.wang
2018-10-08Move compiler.h to commonlibNico Huber
2018-10-08mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for BobbaPan Sheng-Liang
2018-10-06soc/intel/common, mb/google, mb/siemens: Use lower case x for RXDFurquan Shaikh
2018-10-06mb/google/poppy/var/ampton: Get rid of min board id for DRAM in CBIFurquan Shaikh
2018-10-06mb/google/octopus/variants/fleex: Disable I2C0 in devicetreeFurquan Shaikh
2018-10-06mb/google/octopus: Disable I2C3 in devicetreeFurquan Shaikh
2018-10-05mb/google/octopus: adjust Bobba I2C CLK under 400KHzPan Sheng-Liang
2018-10-04mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for FleexIvy Jian
2018-10-01mb/google/octopus: Operate touchpad I2C CLK in specChris Zhou
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
2018-09-26mb/google/octopus: Touchpad I2C CLK (405.25KHz)over spec(＜400KHz)peichao.wang
2018-09-26mb/google/octopus: Close unused I2C bus 7 include SCL and SDA for PhaserPeichao Wang
2018-09-21mb/google/octopus: Create ampton variantJustin TerAvest
2018-09-21mb/google/octopus/variants/fleex: Update DPTF parametersSumeet Pawnikar
2018-09-20mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for meepWisley Chen
2018-09-14mb/google/octopus: Query the EC for board versionKarthikeyan Ramasubramanian
2018-09-14mb/google/octopus: fetch DRAM part number from CBI for phaser after DVT phasepeichao.wang
2018-09-12mainboards: Add SMMSTORE region in chromeos configsPatrick Georgi
2018-09-06mb/google/octopus: Configure H1 interrupt pad using Rx level configFurquan Shaikh
2018-09-06mb/google/octopus: Enable TBMC deviceAmanda Huang
2018-08-30mb/google/octopus: Add missing IOstandy settings.Shamile Khan
2018-08-28mb/google/octopus/variants/meep: Add weida touchscreen supportTony Huang
2018-08-27mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
2018-08-27mb/google/octopus: add Digitizer and Synaptics Touchpad for bobbaPan Sheng-Liang
2018-08-23mb/google/octopus: Add null pointer checkJohn Zhao
2018-08-23mb/google/octopus/var/meep: Update GPIO config for meepWisley Chen
2018-08-22mb/google/octopus/variants/bobba: Apply new GPIO configs for bid >= 2Furquan Shaikh
2018-08-20mb/google/octopus/variants/fleex: Increase weida touchscreen reset delayCrystal Lin
2018-08-14mb/google/octopus/var/bobba: Update GPIO config for bobba bid >= 1Justin TerAvest
2018-08-13google/bobba: Add Raydium touch screen supportPan Sheng-Liang
2018-08-13mb/google/octopus/variants/fleex: Set up DPTF tableJohn Su
2018-08-13mb/google/octopus: Enable SAR config for Intel 9560 moduleJohn Zhao
2018-08-12mb/google/octopus: Do not configure IOStandby for WLAN_PE_RSTFurquan Shaikh
2018-08-12mb/google/octopus: Configure WiFi wake as NC when using CNViFurquan Shaikh
2018-08-12mb/google/octopus: Use correct chip for CNVi deviceFurquan Shaikh
2018-08-12mb/google/octopus: Dynamically disable CNVi/PCIe deviceFurquan Shaikh
2018-08-12mb/google/octopus: Disable unused I2C2 in devicetreeFurquan Shaikh
2018-08-12mb/google/octopus/var/fleex: Update GPIO config for fleex bid >= 1Furquan Shaikh
2018-08-10mb/google/octopus: add support for new shared memory configAaron Durbin
2018-08-09mb/google/octopus: add support for fetching DRAM part number from CBIAaron Durbin
2018-08-09mb/google/octopus: remove disable_periodic_retraining optionsAaron Durbin
2018-08-06mb/google/octopus/variants/baseboard: Update Power Limit1Sumeet Pawnikar
2018-08-06mb/google/octopus/variants/fleex: Enable Weida touchscreen deviceCrystal Lin
2018-08-02mb/google/octopus: Enable EC SW sync for allJustin TerAvest
2018-07-31mb/google/octopus: add lpddr4 skus for new memory sourcesnickchen
2018-07-31mb/google/octopus: Enable EC SW sync for fleexJustin TerAvest
2018-07-30mb/google/octopusi/variants/bip: Fix unused pins and those with external term...Furquan Shaikh
2018-07-29mb/google/octopus: Perform EC init before bootblock gpio configurationFurquan Shaikh
2018-07-26mb/google/octopus/variants/phaser: Provide override GPIO configFurquan Shaikh
2018-07-26mb/google/octopus: Use newly added gpio_configure_pads_with_overrideFurquan Shaikh
2018-07-26mb/google/octopus: update phaser touchscreen enable gpioAaron Durbin
2018-07-26mb/google/octopus: add variant devicetree update callbackAaron Durbin
2018-07-26mb/google/octopus: remove unused variant_board_id()Aaron Durbin
2018-07-25mb/google/octopus: Fix unused pins and those with external terminationsFurquan Shaikh
2018-07-23mb/google/octopus: Add support for smbios_mainboard_skuFurquan Shaikh
2018-07-23mb/google/octopus: Use unused space in RO_SECTION for COREBOOT regionFurquan Shaikh
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 19:59:45 +0000