summaryrefslogtreecommitdiff
path: root/src/mainboard/google/octopus/variants
AgeCommit message (Expand)Author
2018-12-17mb/google/octopus: Add custom SAR values for BobbaJustin TerAvest
2018-12-14mb/google/octopus: Override emmc DLL values for BobbaBora Guvendik
2018-12-12mb/google/octopus/ampton: Fix the TRACKPAD_INT_ODL GPIO configurationKarthikeyan Ramasubramanian
2018-12-11mb/google/octopus/variants/meep: Add 20ms reset delay for WACOM deviceTony Huang
2018-12-10mb/google/octopus: Update the PEN_EJECT GPIO configurationKarthikeyan Ramasubramanian
2018-12-09mb/google/octopus/phaser: Fix trackpad GPE wake configurationKarthikeyan Ramasubramanian
2018-12-03mb/google/octopus: Enable mode change as wake source from S3/S0ixFurquan Shaikh
2018-11-29mb/google/octopus: Create Casta variantKarthikeyan Ramasubramanian
2018-11-27mb/google/octopus/var/phaser: Deprecate board id 0Furquan Shaikh
2018-11-27mainboard/google/octopus/variants/ampton: Decrease I2C CLK frequencyCarl Yang
2018-11-27mb/google/octopus/var/bobba: Deprecate board id < 2Furquan Shaikh
2018-11-27mb/google/octopus/var/fleex: Deprecate bid 0Furquan Shaikh
2018-11-27mb/google/octopus: Update GPIO_178 in early_gpio_table in baseboardFurquan Shaikh
2018-11-27mb/google/octopus: Configure all debug header lines as NCFurquan Shaikh
2018-11-21mb/google/octopus: Update TSR1 threshold settingsSumeet Pawnikar
2018-11-16mb/google/octopus/variants/bobba: Set tcc offset for bobbaSumeet Pawnikar
2018-11-12mb/google/octopus/var/bobba: Configure EC_SYNC IRQ as level-triggeredFurquan Shaikh
2018-11-12mb/google/octopus/variants/fleex: Set up tcc offset for fleexJohn Su
2018-11-08mb/google/octopus/variants/baseboard: Improve cold boot and S3 resumeJohn Zhao
2018-11-05mb/google/octopus/var/bobba: Define GPIO_134 as EC_SYNC_IRQEnrico Granata
2018-10-24mb/google/octopus/variants/fleex: Update DPTF parametersJohn Su
2018-10-23mb/google/octopus: Use a single GPIO for trackpad wake and IRQFurquan Shaikh
2018-10-11mb/google/octopus: I2C clock tuning for meepWisley Chen
2018-10-10mb/google/octopus: Drop I2C bus 0 clock frequency for Phaserpeichao.wang
2018-10-08Move compiler.h to commonlibNico Huber
2018-10-06soc/intel/common, mb/google, mb/siemens: Use lower case x for RXDFurquan Shaikh
2018-10-06mb/google/octopus/variants/fleex: Disable I2C0 in devicetreeFurquan Shaikh
2018-10-06mb/google/octopus: Disable I2C3 in devicetreeFurquan Shaikh
2018-10-05mb/google/octopus: adjust Bobba I2C CLK under 400KHzPan Sheng-Liang
2018-10-01mb/google/octopus: Operate touchpad I2C CLK in specChris Zhou
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
2018-09-26mb/google/octopus: Touchpad I2C CLK (405.25KHz)over spec(＜400KHz)peichao.wang
2018-09-26mb/google/octopus: Close unused I2C bus 7 include SCL and SDA for PhaserPeichao Wang
2018-09-21mb/google/octopus: Create ampton variantJustin TerAvest
2018-09-21mb/google/octopus/variants/fleex: Update DPTF parametersSumeet Pawnikar
2018-09-06mb/google/octopus: Configure H1 interrupt pad using Rx level configFurquan Shaikh
2018-09-06mb/google/octopus: Enable TBMC deviceAmanda Huang
2018-08-30mb/google/octopus: Add missing IOstandy settings.Shamile Khan
2018-08-28mb/google/octopus/variants/meep: Add weida touchscreen supportTony Huang
2018-08-27mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
2018-08-27mb/google/octopus: add Digitizer and Synaptics Touchpad for bobbaPan Sheng-Liang
2018-08-23mb/google/octopus/var/meep: Update GPIO config for meepWisley Chen
2018-08-22mb/google/octopus/variants/bobba: Apply new GPIO configs for bid >= 2Furquan Shaikh
2018-08-20mb/google/octopus/variants/fleex: Increase weida touchscreen reset delayCrystal Lin
2018-08-14mb/google/octopus/var/bobba: Update GPIO config for bobba bid >= 1Justin TerAvest
2018-08-13google/bobba: Add Raydium touch screen supportPan Sheng-Liang
2018-08-13mb/google/octopus/variants/fleex: Set up DPTF tableJohn Su
2018-08-12mb/google/octopus: Do not configure IOStandby for WLAN_PE_RSTFurquan Shaikh
2018-08-12mb/google/octopus: Use correct chip for CNVi deviceFurquan Shaikh
2018-08-12mb/google/octopus: Disable unused I2C2 in devicetreeFurquan Shaikh
2018-08-12mb/google/octopus/var/fleex: Update GPIO config for fleex bid >= 1Furquan Shaikh
2018-08-10mb/google/octopus: add support for new shared memory configAaron Durbin
2018-08-09mb/google/octopus: remove disable_periodic_retraining optionsAaron Durbin
2018-08-06mb/google/octopus/variants/baseboard: Update Power Limit1Sumeet Pawnikar
2018-08-06mb/google/octopus/variants/fleex: Enable Weida touchscreen deviceCrystal Lin
2018-07-31mb/google/octopus: add lpddr4 skus for new memory sourcesnickchen
2018-07-30mb/google/octopusi/variants/bip: Fix unused pins and those with external term...Furquan Shaikh
2018-07-26mb/google/octopus/variants/phaser: Provide override GPIO configFurquan Shaikh
2018-07-26mb/google/octopus: Use newly added gpio_configure_pads_with_overrideFurquan Shaikh
2018-07-26mb/google/octopus: update phaser touchscreen enable gpioAaron Durbin
2018-07-26mb/google/octopus: add variant devicetree update callbackAaron Durbin
2018-07-26mb/google/octopus: remove unused variant_board_id()Aaron Durbin
2018-07-25mb/google/octopus: Fix unused pins and those with external terminationsFurquan Shaikh
2018-07-18mb/google/octopus/variants/baseboard: Udpate CPU critical tempSumeet Pawnikar
2018-07-18mb/google/octopus: Create meep variantJustin TerAvest
2018-07-12mb/google/octopus/variants/yorp: Enable TBMC deviceFurquan Shaikh
2018-07-12mb/google/octopus: Enable TBMC device only for phaserFurquan Shaikh
2018-07-06mb/google/octopus: Enable tablet modeJustin TerAvest
2018-06-28mb/google/octopus: Create bobba variantJustin TerAvest
2018-06-25mb/google/octopus: Use the newly added override devicetree featureFurquan Shaikh
2018-06-25mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
2018-06-20mb/google/octopus: Configure EC_IN_RW correctlyFurquan Shaikh
2018-06-20mb/google/octopus: Enable Synaptics touchpad devicewuxy
2018-06-18mb/google/octopus: Enable Synaptics touchscreen deviceFurquan Shaikh
2018-06-18mb/google/octopus: Create fleex variantJustin TerAvest
2018-06-15soc/intel/{glk,apl} and mainboards: Configure LPC_CLKRUN# pin as GPIO for S0ixHannah Williams
2018-06-07mb/google/octopus: Fix GPIO to GPE mappings in devicetreeFurquan Shaikh
2018-06-06mb/google/octopus: Update GPIOs as per latest schematicsFurquan Shaikh
2018-06-06mb/google/octopus: Fix invalid IOSSTATE settings for 1.8V pinsShamile Khan
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
2018-06-06mb/google/octopus: Enable wake-over-wifi for octopus variantsFurquan Shaikh
2018-06-04mb/google: Get rid of whitespace before tabElyes HAOUAS
2018-06-01mb/google/octopus: Enable RT5682 headset codec for BIP boardNaveen Manohar
2018-05-28soc/intel/apollolake: Don't use pulldowns in standby state for 1.8/3.3V pins.Shamile Khan
2018-05-21mb/google/octopus: Add devicetree for BipJustin TerAvest
2018-05-19mb/google/octopus: enable xdci controllerJagadish Krishnamoorthy
2018-05-18mb/google/octopus: Disable BT before S5 entryHannah Williams
2018-05-11mb/google/octopus: Ignore standby state for DMIC pinsShamile Khan
2018-05-02mb/google/octopus: Configure pins to reflect delta w.r.t yorpShamile Khan
2018-04-30mb/google/octopus: Create phaser variantJustin TerAvest
2018-04-30mb/google/octopus: Fix crossystem wpsw_cur errorHannah Williams
2018-04-28mb/google/octopus: Enable pull on ESPI_IO1 lineFurquan Shaikh
2018-04-25mb/google/octopus: Disable PCIE NPK deviceShaunak Saha
2018-04-24compiler.h: add __weak macroAaron Durbin
2018-04-21mb/google/bip: Add GPIO configuration settingsShamile Khan
2018-04-16mb/google/octopus: Add Write Protect GPIO to cros_gpiosHannah Williams
2018-04-09mb/google/octopus: Enable EC wakeShaunak Saha
2018-04-09mb/google/octopus/variants/baseboard: Add DPTF parametersSumeet Pawnikar
2018-04-06mb/google/octopus: Edge trigger cr50 interruptJustin TerAvest
2018-04-06mb/google/octopus/variants/baseboard: Enable DPTF supportSumeet Pawnikar
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 23:21:16 +0000