summaryrefslogtreecommitdiff
path: root/src/mainboard/google/octopus/variants
AgeCommit message (Collapse)Author
2024-03-30mb/google: Remove blank lines before '}' and after '{'Elyes Haouas
Change-Id: If68303cd59b287c8a5c982063b2ab75fd74898d6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-01-24mb/google/oak to rex: Rename Makefiles from .inc to .mkMartin Roth
The .inc suffix is confusing to various tools as it's not specific to Makefiles. This means that editors don't recognize the files, and don't open them with highlighting and any other specific editor functionality. This issue is also seen in the release notes generation script where Makefiles get renamed before running cloc. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I85cda24aa7dec82d23e8a321dac03ec737f4c503 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80108 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-12-15mb/google: Reduce DA7219 mic detect threshold to 200ohmTerry Cheong
The original DA7219 is designed to use a 500ohm mic detection threshold. Some headset mics (e.g. Logitech H111) have a lower DC impedance that is lower than the threshold and thus cannot be detected. Lower the threshold to 200ohm to match the new default value provided by Renasas as in https://patchwork.kernel.org/project/alsa-devel/patch/20231201042933.26392-1-David.Rau.opensource@dm.renesas.com/ to support such headsets. BUG=b:314062160,b:308207450 Change-Id: I6415e84a4622e0c61bc74b94536fe734048a043f Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the mainboard directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-06-19soc/intel/apollolake: Switch to snake case for ModPhyIfValueMario Scheithauer
For a unification of the naming convension, change from pascal case to snake case style for parameter 'ModPhyIfValue'. Change-Id: I4cdf68e65cea4ab316af969cd6a8d096b456518d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75855 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-19soc/intel/apollolake: Switch to snake case for DisableComplianceModeMario Scheithauer
For a unification of the naming convension, change from pascal case to snake case style for parameter 'DisableComplianceMode'. Change-Id: I9d5605134a753f161a66857c7f78844ae7490cd6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-19soc/intel/apollolake: Switch to snake case for PmicPmcIpcCtrlMario Scheithauer
For a unification of the naming convension, change from pascal case to snake case style for parameter 'PmicPmcIpcCtrl'. Change-Id: I3632d1e83108221d3487b4f175133ad347238bc5 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75853 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-05mb/google/octopus: Disable unused devices in devicetreeMatt DeVillier
The image processing unit/GMM and xDCI are not used on octopus boards; additionally, enabling xDCI can cause some problems with USB ports in both booting from the payload and in the OS. Change-Id: I1ee99b5c45881a4cf3624bf487bc9d83fb3d07a1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22mb/google/octopus: Add EC_HOST_EVENT_PANIC to SCI maskRob Barnes
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the Kernel when an EC panic occurs. If system safe mode is also enabled on the EC, the kernel will have a short period to extract and save info about the EC panic. BUG=b:268342532 BRANCH=firmware-octopus-11297.B TEST=Observe kernel ec panic handler run when ec panics Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I37e566e459f39f8bc2dafc3c3915260259730ca6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-03soc/intel/apl: Move cpu cluster to chipset.cbArthur Heymans
Change-Id: I7eaf625e5acfcefdae7c81e186de36b42c06ee67 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
The parallel mp code picks up lapics at runtime, so remove it from all devicetrees that use this codebase. Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-01-15drivers/i2c/generic: Drop 'disable_gpio_export_in_crs' flagMatt DeVillier
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the OS driver and ACPI thinking they own the GPIO. This can cause timing problems because it's not clear which system should be controlling the GPIO. Previously, we flagged as an error any device which set the 'has_power_resource' flag but did not set 'disable_gpio_export_in_crs.' There's no reason to require explicit disablement however, so drop the superfluous 'disable' flag, and change the _CRS generation to check if the GPIOs will be exported via the 'has_power_resource' flag instead. BUG=b:265055477 TEST=build/boot skyrim, dump SSDT and verify touchscreen GPIOs only listed under PRx, not under _CRS. Change-Id: I837ae6c6fe4b8e1c4e10686406cba06bdb7759d2 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-13mainboard: Remove duplicated <soc/gpio.h>Elyes Haouas
<gpio.h> chain-include <soc/gpio.h>. Change-Id: Ia57d5cd33c70b6a755babd4db56c64c0e3666f9f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-12-22mb/google/hatch: update ACPI HID/CID for Synaptics touchpadsMatt DeVillier
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows WHQL validation tests. To ensure compatibility with both Windows and Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously done for other boards (eg, google/lulu). TEST=boot Linux 5.1x, Windows 10 on bobba, verify all touchpad functions work correctly. Change-Id: I4fd66be21eeff5f37b58a8922c49683a28685064 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-12-21mb/google/octopus: Use runtime detection for touchscreens/digitizersMatt DeVillier
Switch from using ACPI "probed" flag to "detect" flag for all i2c touchscreens and digitizers. This removes non-present devices from the SSDT and relieves the OS of the burden of probing. Test: build/boot Windows/Linux on various octopus variants, verify touchscreens/digitizers functional, dump ACPI tables and verify only i2c devices actually present on the board have entries in the SSDT. Change-Id: I67c5bbae42e96ae21d37309e382b635321e6ef01 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63214 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-21mb/google/octopus: Set touchpad/screen IRQs to LEVEL vs EDGEMatt DeVillier
The GPIOs themselves are configured as level triggered, and the drivers (both Linux and Windows) work better with LEVEL vs EDGE triggering. TEST=tested with rest of patch train Change-Id: I13bc6920a0dfaf769091b1764a7584902d1f85d6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63213 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-21mb/google/octopus: Implement touchscreen/digitizer power sequencingMatt DeVillier
For octopus variants with a touchscreen/digitizer, drive the enable and reset GPIOs high in romstage, then disable the reset GPIOs in ramstage. Where available, only set the GPIOs for SKUs which have a touchscreen. This will allow coreboot to detect the presence of i2c touchscreens during ACPI SSDT generation (implemented in a subsequent commit). TEST=tested with rest of patch train Change-Id: Ia725b4054069c0a4f60afd7e0bca6e2fd5fdcbba Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63212 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-21mb/google/octopus: Add method to set GPIOs in romstageMatt DeVillier
Add method variant_romstage_gpio_table() with empty weak implementation to allow variants to override as needed for touchscreen power sequencing (to be implemented in a subsequent commit). Call method in romstage to program any GPIOs the variant may need to set. TEST=tested with rest of patch train Change-Id: I4a8e11945ae64b000051989089e0ebae22896c6b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70905 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-19mb/google/octopus: Add NHLT endpoints for Cirrus Logic codecMatt DeVillier
Add NHLT endpoints for octopus boards using CS42L42 codec. Reuse method to add da7219 endpoint as the routing is identical. TEST=boot Windows, verify audio working with coolstar's audio drivers. Change-Id: Id68997073752f5d90b6fe21f666a6140e22d65eb Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-12-19mb/google/octopus: update variant VBTsMatt DeVillier
Remove flag in VBTs for 'Use fixed resolution at boot' to allow FSP/GOP display init to use native panel resolution instead. TEST=build/boot multiple google/octopus variants with edk2 payload, verify boot logo not distorted/stretched. Change-Id: Ia31ff28379282619dfa22a955bee1a768bb54bb8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-12-12mb/google/octopus/variants/phaser: Implement variant_memory_sku()Joey Peng
This change override memory ID 3 to 1 to workaround the incorrect memory straps in hardware. We would use board_id 7 to identify the specific boards which need to correct the memory ID. BUG=b:259301885 BRANCH=Octopus TEST=Verified on Phaser Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I2330b7e16a09f8cc76ed96e81a6165afa80a03a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/70353 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-19ec/google/chromeec: Remove EC_HOST_EVENT_USB_CHARGERCaveh Jalali
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all references. BUG=b:216485035,b:258126464 BRANCH=none TEST=none Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-09-28mb/google/octopus: rename baseboard GPIO table getter for clarityMatt DeVillier
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the GPIO table comes from the baseboard, and is overridden by a separate table from the variant. Drop the __weak qualifier as this function is not overridden. Change-Id: I17db734784ce96cdf5e0486dc2ad057d73bfb15f Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-28mb/google/octopus/ampton: Use variant_override_gpio_tableMatt DeVillier
Rather than duplicating the entire set of GPIOs from the baseboard, use the variant_override_gpio_table() method like all other octopus variants do. TEST=build/boot ampton, dump GPIOs and verify unchanged. Change-Id: I36aa25bbee7c21a51d9fdd40405f492082455d9c Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67803 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-09mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flagMatt DeVillier
Historically, ChromeOS devices have worked around the problem of OEMs using several different parts for touchpads/touchscreens by using a ChromeOS kernel-specific 'probed' flag (rejected by the upstream kernel) to indicate that the device may or may not be present, and that the driver should probe to confirm device presence. Since c636142b, coreboot now supports detection for i2c devices at runtime when creating the device entries for the ACPI/SSDT tables, rendering the 'probed' flag obsolete for touchpads. Switch all touchpads in the tree from using the 'probed' flag to the 'detect' flag. Touchscreens require more involved power sequencing, which will be done at some future time, after which they will switch over as well. TEST: build/boot at least one variant for each baseboard in the tree. Verify touchpad works under Linux and Windows. Verify only a single touchpad device is present in the ACPI tables. Change-Id: I47c6eed37eb34c044e27963532e544d3940a7c15 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67305 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-20soc/intel/apollolake: Hook up UfsEnabled to devicetreeSean Rhodes
Hook up FSP S UfsEnabled UPD (1d.0) to devicetree. UFS only exist on GLK, and has been there since its initial releases. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1976bfd340c728c64aaf36d296ac41dcd47bfc61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-05mb/google/octopus: Demote NHLT log messages from error to infoMatt DeVillier
Change-Id: Ib2d0c6a23b66e6e61cc8ea09a443e19a4b37c66d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-04-24mainboard/google: Remove unused <boardid.h>Elyes Haouas
Found using: diff <(git grep -l '#include <boardid.h>' -- src/) <(git grep -l 'UNDEFINED_STRAPPING_ID\|BOARD_ID_UNKNOWN\|BOARD_ID_INIT\|board_id(\|ram_code(\|sku_id(' -- src/) |grep "<" Change-Id: I2611be41e8730a9b189b1b0aa3fe62be0757b371 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <martinroth@google.com>
2022-04-07ChromeOS: Add DECLARE_x_CROS_GPIOS()Kyösti Mälkki
Change-Id: I88406fa1b54312616e6717af3d924436dc4ff1a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-06ChromeOS: Promote variant_cros_gpio()Kyösti Mälkki
The only purpose of mainboard_chromeos_acpi_generate() was to pass cros_gpio array for ACPI \\OIPG package generation. Promote variant_cros_gpio() from baseboards to ChromeOS declaration. Change-Id: I5c2ac1dcea35f1f00dea401528404bc6ca0ab53c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-10src/mainboard: Remove unused <delay.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <delay.h>' -- src/) <(git grep -l 'get_timer_fsb(\|init_timer(\|udelay(\|mdelay(\|delay(' -- src/) |grep "<" Change-Id: I50fcbb16895662c7451fec1569a8a61398792531 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-13mb/google/octopus: add ALC5682I-VS to be supported in the SSFCPaul Huang
Add ALC5682I-VS codec support. ALC5682I-VD/ALC5682I-VS load different hid name depending on SSFC. BUG=b:198722640 BRANCH=octopus TEST=Set CBI SSFC BIT9-11 to select codec, and test audio works Change-Id: I80be12d88e100ce8586371fc49b36447859e24f8 Signed-off-by: Paul Huang <paul2_huang@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-11-17mb/google/octopus: Add missing VBTs for variantsMatt DeVillier
Add VBTs for all octopus variants currently supported by ChromeOS recovery images. For variants which use multiple VBTs and select at runtime, ensure these are added directly to CBFS. Change-Id: I4b5c4268f9255d658f9762d94488db66e0677830 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15Reland "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen
This reverts commit adb393bdd6cd6734fa2672bd174aca4588a68016. This relands commit 6260bf712a836762b18d80082505e981e040f4bc. Reason for revert: The original CL did not handle some devices correctly. With the fixes: * commit 36721a4 (mb/google/brya: Add GPIO_IN_RW to all variants' early GPIO tables) * commit 3bfe46c (mb/google/guybrush: Add GPIO EC in RW to early GPIO tables) * commit 3a30cf9 (mb/google/guybrush: Build chromeos.c in verstage This CL also fix the following platforms: * Change to always trusted: cyan. * Add to early GPIO table: dedede, eve, fizz, glados, hatch, octopus, poppy, reef, volteer. * Add to both Makefile and early GPIO table: zork. For mb/intel: * adlrvp: Add support for get_ec_is_trusted(). * glkrvp: Add support for get_ec_is_trusted() with always trusted. * kblrvp: Add support for get_ec_is_trusted() with always trusted. * kunimitsu: Add support for get_ec_is_trusted() and initialize it as early GPIO. * shadowmountain: Add support for get_ec_is_trusted() and initialize it as early GPIO. * tglrvp: Add support for get_ec_is_trusted() with always trusted. For qemu-q35: Add support for get_ec_is_trusted() with always trusted. We could attempt another land. Change-Id: I66b8b99d6e6bf259b18573f9f6010f9254357bf9 Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-11ChromeOS: Replace with or add <types.h>Kyösti Mälkki
It's commented in <types.h> that it shall provide <commonlib/helpers.h>. Fix for ARRAY_SIZE() in bulk, followup works will reduce the number of other includes these files have. Change-Id: I2572aaa2cf4254f0dea6698cba627de12725200f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-09ChromeOS: Fix <vc/google/chromeos/chromeos.h>Kyösti Mälkki
Change-Id: Ibbdd589119bbccd3516737c8ee9f90c4bef17c1e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-10-05src/mainboard to src/security: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-26mb/google/octopus: add CBI SKU RAM ID 5Sheng-Liang Pan
add CBI sku RAM ID 5 for 4GiB Capacity with dual channel and dual rank with 4gb dram density. BUG=b:178665760 BRANCH=Octopus TEST=build fw and flash to the dut with RAMID 5, dut can boot up successfully. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I922a518cffc4dac71caec68e6f7a55c6c5717438 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56982 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-17mb/google/octopus/var/phaser: Change IRQ trigger method to levelJoey Peng
The change from Synaptics S7817 to Elan 3915N and pin distribution of touch IC is the same. The original Elan section was copied from reference design and was never used before. According to vendor spec definition IRQ trigger method needs to change to level. BUG=b:190574692 TEST=Build coreboot and check that device works Change-Id: I44ee779242779c78ceafdddd34dca2571e714dd3 Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56380 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21mb/google/octopus/variants/ampton: Resume from suspend on critical batteryJames Chao
This patch makes Ampton EC wake up AP from s0ix when the state of charge drops to 2%. Demonstrated as follows: 1. Boot Ampton. 2. Run powerd_dbus_suspend. 3. On EC, run battfake 2. 4. System resumes. BUG=b:189540432 BRANCH=Octopus TEST=Verified on Ampton. Change-Id: I98d8e6ea185e8782ad675d4668678b341ca5d350 Signed-off-by: James Chao <james_chao@asus.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56341 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25mb/google/octopus: add audio codec into SSFC support for Garg/GarfourKevin Chiu
BUG=b:191213716 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I2d5738442d2c173fd5b4802d8b5dff76b428c6f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55564 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-22drivers/i2c: sx9310: fix overridetree.cbGwendal Grignou
An error in script did not set the attribute properly: - Entry CS0 is not used as sensor, but as ground, - Entry CS1 is used as the startup sensor. This fixes a regression caused by commit 689c25b9d6 (drivers/i2c: sx9310: Replace register map with descriptive names) EQ=b:173341604 BRANCH=volteer Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Change-Id: I92c01209031e9a917d95b1cb2537b0ce7b93e66d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51893 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12mb/google/octopus/var/phaser: add audio codec into SSFC support for PhaserKevin Chang
Add audio codec module RT5682 in project and define GPIO_137 in the override_table for SSFC framework to adjust IRQ configuration. BUG=b:182221327 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682I or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I202f71f57ad2db84fb90b52f9ffd7a1fd05494a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-05-12mb/google/octopus/var/fleex: Add cs42l42 HSBIAS settingIan Feng
Disable HSBIAS sense setting. BUG=b:184103445 TEST=boot to check cs42l42 is functional. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I12c0e0a0f7490d35d36fe8ccbc940f29e1bb7976 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-06mb/google/octopus: add audio codec into SSFC support for BloogTony Huang
BUG=b:186380809 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Change-Id: I0975a8b64452c3f636e6c5937c6918518ec5b4e9 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-04-23mb/google/octopus/var/fleex: Add ssfc codec cs42l42 supportEric Lai
Add cs42l42 codec support in fleex. BUG=b:184103445 TEST=boot to check cs42l42 is functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I1571003f8b272a573e6ab9fb525f17659bae8c4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-03-23mb/google/octopus: Wake up AP on AC plug and unplugDerek Basehore
This patch makes all Octopus variants resume from S0ix/S3 on AC plug and unplug. Change-Id: Iab054d77368bf2047b6d523188b8c401a7643aaa Signed-off-by: Derek Basehore <dbasehore@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-17sar: Fix semantics of `get_wifi_sar_cbfs_filename()`Furquan Shaikh
Currently, if `get_wifi_sar_cbfs_filename()` returns NULL, then `get_wifi_sar_limits()` assumes that the default filename is used for CBFS SAR file. This prevents a board from supporting different models using the same firmware -- some which require SAR support and some which don't. This change updates the logic in `get_wifi_sar_limits()` to return early if filename is not provided by the mainboard. In order to maintain the same logic as before, current mainboards are updated to return WIFI_SAR_CBFS_DEFAULT_FILENAME instead of NULL in default case. Change-Id: I68b5bdd213767a3cd81fe41ace66540acd68e26a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51485 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15mb/google/octopus/var/fleex: Add RTL5682 supportEric Lai
Fleex will use SSFC to support RTL5682. BUG=b:178653122 TEST=abuild Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Icb06eabe297c5562bd2171b52cc9671c342e6dfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/51423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-03-10drivers/i2c: sx9310: Replace register map with descriptive namesGwendal Grignou
The current driver is using chip registers map to configure the SAR sensor, which is opaque, especially when the datasheet is not published widely. Use more descriptive names, as defined in Linux kernel documentation at https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/semtech%2Csx9310.yaml BUG=b:173341604 BRANCH=volteer TEST=Dump all tables, check semtech property: for i in $(find /sys/firmware/acpi/tables/ -type f) ; do f=$(basename $i); cat $i > /tmp/$f.dat ; iasl -d /tmp/$f.dat done In SSDT.dsl, we have: Package (0x06) { Package (0x02) { "semtech,cs0-ground", Zero }, Package (0x02) { "semtech,startup-sensor", Zero }, Package (0x02) { "semtech,proxraw-strength", Zero }, Package (0x02) { "semtech,avg-pos-strength", 0x0200 }, Package (0x02) { "semtech,combined-sensors", Package (0x03) { Zero, One, 0x02 } }, Package (0x02) { "semtech,resolution", "finest" } } Change-Id: I8d1c81b56eaeef1dbb0f73c1d74c3a20e8b2fd7b Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-09mb/google/octopus/var/fleex: Only check LTE sku on fleexEric Lai
Fleex has other project share the same FW. Only fleex has LTE sku. So we need to make sure it is fleex then check if LTE sku. BUG=b:181946744 BRANCH=octopus TEST=Check no SAR table can be loaded with sku id 4 and 5. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9f3d5fed4315fc716acad1a07735221d154c377e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com>
2021-02-03src: Remove unused <boardid.h>Elyes HAOUAS
Change-Id: I960870fabde1dacfe52a8a35c253b0bd097d3e10 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-01-22mb/google/octopus: Garfour override VBT selectionTony Huang
Disable DRRS in VBT to solve panel flick issue SKU ID 49/51 will use vbt_garfour.bin 50/52 will use vbt_garfour_hdmi.bin BUG=b:177783330 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check /run/debug/i915_drrs_status shows DRRS supported NO. Cq-Depend: chrome-internal:3534569 Change-Id: I5ebb66ec043a6b409dd5abbc31da417f50dbad5c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49635 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/octopus: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ieeb738afd54e77ee853ee109009f611411aa0d4a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49426 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/octopus: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: Ie33bae481f430a1c4410a0a4e2b2a34a3e78adaa Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49411 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11mb/google/octopus: add audio codec into SSFC support for MeepTony Huang
BUG=b:171757619 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Change-Id: I37390535e263b4b9547ad7307278e3360ba836bd Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-01-08mb/google/octopus: add audio codec into SSFC support for BobbaMarco Chen
BUG=b:174118027 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Signed-off-by: Marco Chen <marcochen@google.com> Change-Id: Id37c4c5716ade0851cfcb24e12b390841e633ac9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2021-01-04mb/google/octopus: Add ACPI backlight controlsMatt DeVillier
Enables backlight control under Windows 10. Test: build/boot Windows 10 20H2 on google/ampton, verify display backlight controls functional. Change-Id: I779f7f3f5a111018fc7b5c50c5750a9eb815d670 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-21mb/google/octopus/var/phaser: Add support for G2TOUCH Touchscreenrasheed.hsueh
Add devicetree configuration for G2TOUCH Touchscreen controller. BUG=b:175513059 BRANCH=octopus TEST=build bios, check i2c bus and verify touch screen works fine Change-Id: Ib57597c4998f205c664e13befb4c44532b7dbd4f Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-16mb/google/octopus/variants/casta: Add support zinitix touchpadSeunghwan Kim
This change adds support zinitix touchpad for casta/bluebird. BRANCH=firmware-octopus-11297.B BUG=b:175618033 TEST=built and verified touchpad worked on casta Change-Id: I1a8f562de19d1a8160d52c65400553f0c68393e0 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48634 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-22mb/google/octopus: fix droid lte sku load specific wifi sar valueSheng-Liang Pan
This CL add droid lte sku 37 38 39 40 to load wifi_sar-droid.hex. BUG=none BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I55dda85b8f3e664d97834b712a2c6a48d1434010 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47697 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17mb/google/octopus/variants/bobba: Add G2Touch touchscreen supportSheng-Liang Pan
Add G2Touch touchscreen support for bobba. BUG=b:171636614, b:169730666 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen work. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ia361a56c050d7cbd7325b3c09fc34d8707441cc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/octopus: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ic334816712370da63471135da8dd598ab02d54ef Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-06mb/google/octopus/variants/garg: Add new LTE SKUKevin Chiu
Add new SKU definition: Garg360 (LTE DB,1A2C,TS, no stylus, rear camera) SKU ID - 39 BUG=b:170708728 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Ifec4e1360bd1aff3825bc6413b0a2ccd8b822075 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47015 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb/google/octopus/var/fleex: Add variant.c into smm stageEric Lai
variant_smi_sleep is called in smm stage so we need to add variant.c into smm stage. Otherwise it will call the dummy one. BUG=b:168075958 BRANCH=octopus TEST=build image passed. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I41df1a30b119ab3e04f9ae01955b6044f137527f Reviewed-on: https://review.coreboot.org/c/coreboot/+/46847 Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb/google/octopus/variants/dood: Add G2Touch touchscreen supportKenneth Chan
Add G2Touch touchscreen support for dood. BUG=b:171526389 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen work. Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ica7d893de285c2dd1efcd43ac74919bdd5d5ac17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46675 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
This change reorganizes the CNVi device entries in mainboard devicetree/overridetree and SoC chipset tree to make it consistent with how other SoC internal PCI devices are represented i.e. without a chip driver around the SoC controller itself. Before: chip drivers/wifi/generic register "wake" = "..." device pci xx.y on end end After: device pci xx.y on chip drivers/wifi/generic register "wake" = "..." device generic 0 on end end end Change-Id: I22660047a3afd5994400341de0ca461bbc0634e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-30mb/google/octopus/var/fleex: Disable XHCI LFPS power management by skuEric Lai
LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. If this option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:169645448 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3a04320b0e2441dce540a5afdc461f12de45c41b Reviewed-on: https://review.coreboot.org/c/coreboot/+/46868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2020-10-27mb/google/octopus/var/garg: Disable XHCI LFPS power management by skuKevin Chiu
LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. If this option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:171478764 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Change-Id: I213fed2b56f216747b2727b69f97d46d8c0c872e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46701 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27mb/google/octopus/var/garg: fix LTE power sequence in reboot stateKevin Chiu
invoke LTE power off function to meet LTE power sequence while DUT is in reboot state. BUG=b:167565015 BRANCH=octopus TEST=build and verify on the DUT with LTE Change-Id: I825cefb524ddaf9a9cb6add31c2ee0eea484f978 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46022 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/octopus/var/fleex: Add goodix touch pad supportEric Lai
Add goodix touch pad as below: HWID : GXTP7288 CID : PNP0C50 I2C address : 0x2C I2C speed : 400Khz HID Descriptor Address : 0x20 BUG=b:171351666 BRANCH=octopus TEST=build image and verify goodix touch pad working. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Idb4f8d3aff09712dcc98c8ae0c9ae30dc4049e29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46614 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/octopus/var/fleex: Add new SKU for LTE touchAmanda Huang
New SKU ID 5 is used for LTE touch SKU. This patch does LTE power off for LTE sku and only use Wifi SAR table for non-LTE sku. BUG=b:168001586 BRANCH=octopus TEST=Check no SAR table can be loaded with sku id 4 and 5. Change-Id: Ic0405d3e52aa813bbb1f350966a9e2825e595ce4 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46643 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-19mb/google/octopus/variants/ampton: Add G2Touch touchscreen supportJames Chao
BUG=b:170703029 BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: James Chao <james_chao@asus.corp-partner.google.com> Change-Id: I2bf642963283b8a31a3bd9504c40541ca2f64b34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-09mb/google/octopus: Disable Ambient Light Sensor (ALS)Karthikeyan Ramasubramanian
ALS is not stuffed in octopus boards. Hence disable ALS ACPI devices. BUG=b:169245831 BRANCH=octopus TEST=Ensure that ALS devices are disabled in ACPI tables. Change-Id: I5ad28f01b0515a41b314116eb2d05c520df0f86e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-05Fleex: Resume from suspend on critical batteryDaisuke Nojiri
This patch makes Fleex EC wake up AP from s0ix when the state of charge drops to 5%. Demonstrated as follows: 1. Boot Fleex. 2. Run powerd_dbus_suspend. 3. On EC, run battfake 5. 4. System resumes. BUG=b:163721887 BRANCH=Octopus TEST=Verified on Fleex: Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I4a998ad0aef5a7cfc6fd18995bde5571e6127e77 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-09-28mb/google/octopus/variants/fleex: Only do LTE power off for LTE skuEric Lai
Only do LTE power off for LTE sku in order to save extra 130ms delay for non-LTE sku. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If983185ff2f09fb1b2553c6ff1a1473d3254de4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2020-09-28mb/google/octopus/var/fleex: Use Wifi SAR table for non-LTE sku onlyEric Lai
Use Wifi SAR table for non-LTE sku only. BUG=b:169115341 BRANCH=octopus TEST=Check no SAR table can be loaded with sku id 4. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I086fa14a9f23e4a0fc0ef8085040219c932dbf17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45640 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-23mb/google/octopus: Set ModPhyIfValue to default value 0x12Marx Wang
0x12 will be more stable according to validation result on SD card and USB devices. BUG=b:163382089 BRANCH=none TEST=check if SD cards and USB devices work properly Signed-off-by: Marx Wang <marx.wang@intel.com> Change-Id: Ic98f27b6164daa3667009300439c61fed43a4a0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45573 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-22mb/google: Drop unneeded empty linesElyes HAOUAS
Change-Id: I4151d1a6ce94763432f307fbc8bc4afe229856ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-21mb/google/octopus: Clean up LTE power off functionEric Lai
All octopus board share the same power off sequence. Move to smihandler.c instead variant.c. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I2be5a656fb42fff99c56d21aaa73ed9140caad37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45436 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18mb/google/octopus/variants/fleex: support LTE power sequenceEric Lai
GPIOs related to power sequence are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9b56ef8ff346c1d4edd5aad04d4a7396c4702ffc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45193 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14mb/google/octopus/variants/fleex: Add G2Touch touchscreen supportJohn Su
BUG=b:167297664 BRANCH=octopus TEST=build fleex, and check touchscreen can work Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I910681c258ff5487830e795a8bd08c66be69b1d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44980 Reviewed-by: Justin TerAvest <teravest@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-01{include,mb,soc,sb,vendorcode}: Make hexadecimal notation consistentSubrata Banik
Convert 0X -> 0x Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Iea3ca67908135d0e85083a05bad2ea176ca34095 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-14mb/google/octopus/variants/casta: Disable xHCI compliance modeSeunghwan Kim
Disable xHCI compliance mode to prevent SS hub detection issue. BRANCH=firmware-octopus-11297.B BUG=none TEST=built Change-Id: I7a9bbc92565e752a8f8f4689519c100594596701 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44438 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-14mb/google/octopus: Set default value of ModPhyIfValue parameterSeunghwan Kim
Set default value of ModPhyIfValue parameter in FSPS_UPD. Without this setting, it will be set to '0' and system may not detect USB 3.0 device. BUG=b:163382089 BRANCH=firmware-octopus-11297.B TEST=Built Change-Id: Ide3d1637f99dba28251102f771b6ce370cc5d8e4 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
Use tabs instead of eight (sometimes less) spaces. Change-Id: Ic3d61f5210d21d9613fc50b47b90af71f544169a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-24mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
SKUID 51 - Garfour EVT (non-touch, TypeA DB) 52 - Garfour DVT (touch, HDMI DB) BUG=b:161554087 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I3cb17c2b665c303da210817a531c869c6324b249 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Henry Sun <henrysun@google.com>
2020-07-01mb/google/octopus/variants/dood: fix disable_xhci_lfps_pm by skuKenneth Chan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ia047c75611a35aafd15f2481bf64049e13d4a2ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/42860 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28gpio_keys: Allow boards to configure different wakeup routesFurquan Shaikh
This change allows mainboard to configure different wakeup routes that can be used by a GPIO key: 1. SCI: This is selected when SCI route is used to wake the system. It results in _PRW property being exposed in ACPI tables. 2. GPIO IRQ: This is selected when GPIO controller wake is used to wake the system. It is typically used when the input signal is not dual routed and the GPIO controller block is not capable of applying filters for IRQ and wake separately. In this case, _PRW is not exposed in ACPI tables for the key device. 3. Disabled: No wakeup supported. Based on these wakeup routes, gpio_keys_add_child_node() is updated to expose _PRW and _DSD properties for wakeup appropriately. Additionally, the change updates mainboards that were already using gpio_keys to set wakeup_route attribute correctly and renames "wake" to "wake_gpe" to make the usage clear. BUG=b:159942427 Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-25mb/google/octopus/variants/bobba: fix disable_xhci_lfps_pm by skuSheng-Liang Pan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I53621d7674a531adfa40e8703cb2cd01c50376b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42564 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/octopus/variants/garg: Add G2Touch touchscreen supportTony Huang
BUG=b:156564296 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I99b04fec88da481e21b7a05807a4f1edeb3a5bdf Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-05-26apollolake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Apollo Lake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on octopus system Change-Id: I609744d165a53c8f91e42a67da1b972de00076a5 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41233 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/octopus/variants/foob: Disable xHCI compliance modeTommie
When any USB image disk is connected to the DUT through HUAWEI/APPLE Dongle, press Ctrl + u on the dev screen, it cannot boot from USB. We found the SS hub cannot be enumerated. So disable xHCI compliance mode. BRANCH=octopus BUG=b:155347573 TEST=Confirm successful boot from USB Change-Id: Iea4a3df156da0627336f7d6c1e03837b6cf0e7f2 Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40905 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11mb/google/octopus/variants/dood: Disable XHCI LFPS power managementKenneth Chan
LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] are set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I88357f44317a5cff2e04508638eb065e5ada4c4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-01mb/google/octopus/variants/bobba: Disable XHCI LFPS power managementSheng-Liang Pan
LTE module is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ib8e5ae79e097debf0c75ead232ddbb2baced2a2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/40303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-04-29mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
SKUID: 49 - Garfour EVT (touch, TypeA DB) 50 - Garfour EVT (non-touch, HDMI DB) BUG=b:152861752 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I656a2bb2404efded6da6697664748b6c8d2ca4e0 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-04-28mb/google/octopus: Add VBT for ampton variantMatt DeVillier
Add VBT file, extracted from stock Google firmware, and select its use via Kconfig. Change-Id: I256c1c72d1d1e40ea9426fa717bfc4f9c950a91f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 23:42:26 +0000