summaryrefslogtreecommitdiff
path: root/src/mainboard/google/oak/mainboard.c
AgeCommit message (Collapse)Author
2018-05-08mb/google: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I8e549e4222ae2ed6b9c46f81c5b5253e8b227ee8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28google/oak: Configure SD card detect pin with a pull-upJulius Werner
SD card detect pins should normally have a pull-up. It seems that for micro-SD cards this doesn't really matter all that much, but for the full-size slots we have on some Oak-derivatives (like Hana) it does. BRANCH=oak BUG=b:35854317 TEST=Booted Hana, confirmed that card detect no longer seemed stuck-on. Booted Elm and confirmed that SD card behavior didn't change. Change-Id: I9b20e0f6fe310e724d191e36ca0a81ab4fe5f593 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c2781eeef50f52c6f02ee9344274ddf4dcb0a946 Original-Change-Id: I428ac92efb07f94265673b04e0e0dd452649b9fd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/452861 Original-Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/19432 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-25google/oak: Enable dual DSI for rowan and the BOE 8-lane MIPI/DSI panelDaniel Kurtz
Unlike other oak derivatives, Rowan uses an 8-lane BOE tv097qxm-nu0 MIPI/DSI panel that requires dual DSI support. Rework oak display initialization to special case Rowan, which uses a provided edid struct for its panel, special panel backlight sequencing and needs to configure mtk_ddp and mtk_dsi to use dual dsi mode. BRANCH=none BUG=b:35774871 TEST=Boot Rowan in developer mode and see output on the panel Change-Id: I136ba5bd1ab12c4ad92995e066fc6d6cf54d0898 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19389 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-25mediatek/mt8173: Add support for Dual DSI outputJitao Shi
The MT817x display output pipeline can be configured to drive an 8-lane MIPI/DSI panel using "dual DSI" mode. For the "dual DSI" video data path, the UFO block is configured to reorder the data stream into left and right halves which are then sent by the SPLIT1 block to the DSI0 and DSI1 respectively. The DSI0 and DSI1 outputs are then synchronously clocked at half the nominal data rate by their respective MIPI_TX0/MIPI_TX1 phys. Also, update the call sites in oak mainboard to avoid build breakage. BRANCH=none BUG=b:35774871 TEST=Boot Rowan in developer mode and see output on the panel Change-Id: Id47dfd7d9e98689b54398fc8d9142336b41dc29f Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19361 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-25google/oak: Use edid_set_framebuffer_bits_per_pixelDaniel Kurtz
This helper function was introduced so that mainboards don't need to manually fill in these struct edid fields. BRANCH=none BUG=b:35774871 TEST=Boot Rowan in developer mode and see output on the panel Change-Id: Ic9404a786a28b314b710e037dcae776be4b584ca Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19388 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-02-23google/oak: Add initial support for RowanYidi Lin
Update GPIO controls and mainboard configurations for Rowan. [pg: use the opportunity to clean-up the gerrit-rebase task list with the entirely unrelated Ignore-CL-Reviewed-on lines] BUG=chrome-os-partner:62672 BRANCH=none TEST=emerge-rowan coreboot Change-Id: I110fb368b3d9fa9dfb2bf091342dfb511ff7c09c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f4252cbe94a7456108aaa522e170bca5dcb1fdd1 Original-Change-Id: I18ebc3ccf4c7d051839d7c50e9b0682ef8f09830 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/430557 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/341513 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/327003 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/355221 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/354670 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/361360 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/361361 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/361362 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/361363 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/382320 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/405110 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/405130 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/419795 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/424139 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/430293 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/430294 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/430295 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/427820 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/427821 Ignore-CL-Reviewed-on: https://chromium-review.googlesource.com/427822 Reviewed-on: https://review.coreboot.org/18463 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-28chromeos: Clean up elog handlingFurquan Shaikh
1. Currenty, boot reason is being added to elog only for some ARM32/ARM64 platforms. Change this so that boot reason is logged by default in elog for all devices which have CHROMEOS selected. 2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that want to add details about watchdog reset in elog. This requires a special region WATCHDOG to be present in the memlayout. 3. Remove calls to elog add boot reason and watchdog reset from mainboards. BUG=chrome-os-partner:55639 Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-26google/oak: dsi: set mipi pin driving control onMartin Roth
We set this driving control to prevent signal attenuation caused by LVDS DRV termination. When DA_LVDSTX_PWR_ON is not set, LVSH has no power and LVDS DRV termination status is unknown(floating). This creates a chance that MIPI output would be influenced. The DSI's LP signal will be half voltage attenuation. There will be no display on panel. When DA_LVDSTX_PWR_ON is set, LVSH and LVDS DRV termination are effective and termination is fixed OFF. The DSI won't be influenced. We only need to set this register once, so we set it here to prevent repeat setting in the kernel when the system goes to recovery mode. BUG=chrome-os-partner:55296 BRANCH=none TEST=build pass elm and show ui The original commit in the cros repo combined the chipset and mainboard code changes. This has been split for the push to coreboot.org Change-Id: I733bdd115950b71493856220414ac0dd75d28122 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0d25a27f300acc4b65a894110d3ee0cc9676cd12 Original-Change-Id: Ie71f9cc41924787be8539c576392034320b57a49 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360850 Original-Commit-Ready: jitao shi <jitao.shi@mediatek.com> Original-Tested-by: jitao shi <jitao.shi@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15808 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-18google/oak & elm: initialize touchscreen reset gpioYH Huang
In order to save power in S3, we remove reset gpio setting in kernel. We still need to initialize touchscreen ic. Do it by pulling low reset gpio for 500us and then pulling high in firmware. BRANCH=none BUG=chrome-os-partner:55170 TEST=build on elm. Change-Id: Idbe0175a1fc1fa0b05e81706194c79d52c6101f6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f40cc9a22c2551c2c9455cb8b60f36353602bca6 Original-Change-Id: If2ac815c4fd5c5ae15443348a49eb31449b724b1 Original-Signed-off-by: YH Huang <yh.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360312 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Johnny Chuang <johnny.chuang@emc.com.tw> Reviewed-on: https://review.coreboot.org/15719 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-05-09google/oak: elm: Update the differences between oak-rev6 and elm-rev0Yidi Lin
- Remove the deprecated revison settings. - Change LID pin to SPI_CK. - Add i2c bus number and i2c slave address for elm. - Skip the pin configurations(ALC5514 and USB OC pins) belonging to Oak. - Add Hynix 4GB DRAM config BRANCH=none BUG=chrome-os-partner:51725 TEST=boot to kernel on elm-rev0 Change-Id: Ifaedd115c84d095ee289b576ff76af6b0aa3e545 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2ed4543cdc7e84a0463b73dda96027270ec30272 Original-Change-Id: Id957374d7a67b8c72df1d07a6cecc1064d4e0356 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332733 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/oak: Add derivative board ElmJulius Werner
This patch adds a new mainboard Google/Elm as a derivative of Google/Oak, using the same code sharing technique for derivative boards that was pioneered with Google/Veyron*. For now, there are no firmware-relevant fundamental differences between the two boards. In addition, introduce a board-specific Kconfig for the "board ID adjustment" to represent the fact that the Elm board ID space mirrors the Oak board ID space with an offset of 6, meaning Elm rev0 is equivalent to Oak rev6, and future board changes will be made on both boards to maintain this stride (at least virtually... not all of those revisions will necessarily get built). This should make it much easier to keep the code that handles revision differences somewhat clean. (That's the theory, anyway... whether it will work out remains to be seen.) BRANCH=None BUG=None TEST=Booted Elm image with hardcoded board ID 0 on Oak rev6. Change-Id: If540aea862b746cf4986a74482ae1764c104fb73 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 53cd85c94945ab0bf14cb88a98e66723fc4483de Original-Change-Id: Ib05fc81dc4f4308d99e34fce74c6db8b323785da Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332276 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/oak: configure displayJitao Shi
BRANCH=none BUG=chrome-os-partner:43706 TEST=saw bootloader screen on rev4 and rev5 Change-Id: I844fed6f63467ad04d17115934a1e4724cc0b671 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2e9d57a42402631923c96e70bc2eff5c135de2fc Original-Change-Id: I748b0eac9a0aab1d38d5d44a1a50dc33d5375379 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331813 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/14690 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09mediatek/mt8173: Add display driverJitao Shi
BRANCH=none BUG=none TEST=saw bootloader screen on rev4 and rev5 with CL:331813 Change-Id: Ibb01cf251276d2c059739f10e166fefd0de35460 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8d52a4c486b75b99dc25657ccb6ed90f671c26d6 Original-Change-Id: I4efe439d52b5a5516145960bcffb340152bfba53 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331812 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/14689 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-05google/oak: Log hardware watchdog in eventlogJulius Werner
The MT8173 hardware watchdog can assert an external signal which we use to reset the TPM on Oak. Therefore we do not need to do the same double-reset dance as on other Chromebooks to ensure that we reset in a correct state. Still, we have a situation where we need to reconfigure the watchdog early in the bootblock in a way that will clear information about the previous reboot from the status register, and we need that information later in ramstage to log the right event. Let's reuse the same watchdog tombstone mechanism from other boards, except that we don't perform a second reset and the tombstone is simply used to communicate between bootblock and ramstage within the same boot. BRANCH=None BUG=None TEST=Run 'mem w 0x10007004 0x8' on Oak, observe how it reboots and how 'mosys eventlog list' shows a hardware watchdog reboot event afterwards. Change-Id: I1ade018eba652af91814fdaec233b9920f2df01f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 07af37e11499e86e730f7581862e8f0d67a04218 Original-Change-Id: I0b9c6b83b20d6e1362d650ac2ee49fff45b29767 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/334449 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/14234 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-03-21google/oak: Move external buck initialization to coreboothenryc.chen
Remove the code which is passing parameters to ARMTF and move external buck initilizaton from ARMTF to coreboot. BRANCH=none BUG=none TEST=verified on Oak rev4/rev5 Change-Id: I4f4b30acbee9b42a202b326f2fe4517cb4b9d83c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 37bec54b4d8a3bce38878e292e4821da3959026a Original-Change-Id: Ib81709812a064f6daf13c9b4d6525f1858c81393 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332343 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14123 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Configure USB OC pinsYidi Lin
BRANCH=none BUG=none TEST=none Change-Id: If7244d0050833c676de72106d1c8473dd8f290a8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89356785e66eb6d5b52fdf09933d2d28d9f67a90 Original-Change-Id: I94dda9834da6553795e7f3f65ff267fdcb6b7d47 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321055 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13977 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config USB Hub for rev5Ben Lok
Reset pin of USB Hub is connected to GPIO118, it is low active. Config GPIO118 as GPO and output high. BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I630cfd1c1019447736e7e5b286790fead4bdcfb6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b4b5cd98d0b3c5d2bab408ecebebc924d1f2b7df Original-Change-Id: I1ea0e1baac3da4d13301307f01bbe51e108298dd Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321054 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13976 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config audio for rev5Koro Chen
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ibdafa4ffe0baf5231654e67612b7ca59d835b602 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 63fedfec26ba1444934e348ce59609fa88e12de5 Original-Change-Id: Ifbbf8d2b3b6e163481843308c2e3edc4a55f90c6 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319988 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Remove obsolete Rev0 settingKoro Chen
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I65aa87e88cf812fdb490933de1a3b121866a2694 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f703f7e71ae6ffc0f1ac0e70486d087a28da5ba Original-Change-Id: I8d794464d45ea69f9a46f7ebc505f6ec2127f204 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319987 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13974 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Enable TP_SHIFT_EN for the revisons before 5 onlyYidi Lin
BRANCH=none BUG=none TEST=emerge coreboot Change-Id: Ic46490a56a6a8146b91a055b9ce5d5bb23bc7a49 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 082ce1848bf37bba369fd0dccc4cf3fc83a8a018 Original-Change-Id: I58f009d2fc03cf5a52b4dbd042a92973cde4d035 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320029 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13973 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: da9212 gpio configuration for rev5henryc.chen
BRANCH=none BUG=none TEST=none Change-Id: Ib44a9e8ca94727809e47831228f4742c25a53977 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: da9185c22264440da822aa252c0c5d2aef78b455 Original-Change-Id: I98c2ad757d0cd0e3234e49392091784b43a106e7 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320028 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13972 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config PANEL_LCD_POWER_EN for rev5Yidi Lin
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ic2019a1d61cbc5949c1f42346b279ef05f725dfb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bf13606f01438bc2ea27ecccc6359a7320dc34cc Original-Change-Id: I3fcc403cb7a3429b9673be0e727fc7d8c9d4f556 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320027 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13971 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Initialize i2c bus timing register for TPM and external buckjun.gao
BRANCH=none BUG=none TEST=build pass and boot to oak kernel Change-Id: Id2c3bbb70a1de54a56ee04ecda76178b1bdf1a4d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9 Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9 Original-Signed-off-by: jun.gao <jun.gao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319031 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: add event logCC Ma
BRANCH=none BUG=none TEST=boot to shell on Rev3 Change-Id: Ifca80705e392ce171ef33bf98ef787e3cd5ffd6b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56 Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b Original-Signed-off-by: CC Ma <cc.ma@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303207 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13104 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Add soc ARM Trusted Firmware supportJimmy Huang
We define a mechanism to pass board specific parameters to BL31. The idea is BL31 doesn't need to have the board revision knowledge, it only needs to process the board specific parameters to initialize and control specific hardware. In this way, we can support different boards with same BL31 binary. BRANCH=none BUG=none TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got different board arguments in ARM TF Change-Id: I0df2c6d7d1ffac7d443511c3317c142efeb5701e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292678 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13101 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22google/oak: Configurate SD card detection pinYidi Lin
BRANCH=none BUG=chrome-os-partner:47609 TEST=remove servo board connection and insert/remove an empty SD card in recovery mode. Change-Id: I89a1cb6914d634f07ff71b9793eb29b711381524 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d21bf091a576574cb9e976447ee2b9a69748d2b6 Original-Change-Id: I2083605c9ad88841885dfaad48dcd27e6fb5161d Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313073 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13099 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22google/oak: setup usb and configure I2C level shift pinBen Lok
BRANCH=none BUG=none TEST=build pass and verified on rev3 Change-Id: I3849342e59c2b022db723ef0281cdd5153ae27cb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 495e978cd7381bd393099315ac6d60fe4446dd9f Original-Change-Id: I9626d06746e5d0bf6698a9b8e7594c58e7ff213a Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292689 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13096 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/oak: Configure backlight control pinsYH Huang
Since backlight is controlled in depthcharge, we only configure control pins as output pin and set them power-off in the coreboot stage. BRANCH=none BUG=none TEST=Saw DEV screen during boot process. Change-Id: I3ed95e133417194ec8e774f42770bc61d879295f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e9628781801943903ba99ba1071aa374c6fc0754 Original-Change-Id: Ifd101f3e08698561d8516d83bc7d502d210e3b66 Original-Signed-off-by: YH Huang <yh.huang@mediatek.com> Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292686 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13093 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/oak: configure audioKoro Chen
BRANCH=none BUG=none TEST=build and verified pass on oak board Change-Id: I01eb059a3525bbbc5d17335cf43bc01be4355142 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bc2bb9f5b461ec848df8aba07940b895401004f8 Original-Change-Id: I848468cec04a36659fbb4b898dff9368305d72ac Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292683 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13092 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
This continues what was done in commit a73b93157f2 (tree: drop last paragraph of GPL copyright header) Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-03mediatek/mt8173: Add a stub implementation of the MT8173 SoCYidi Lin
BUG=chrome-os-partner:36682 TEST=emerge-oak coreboot BRANCH=none Change-Id: I748752d5abca813a0469d3a76e4d40fcbeb9b959 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ece2f412d94f071a6f5f1dbed4dfaea504da9e1a Original-Change-Id: I1dd5567a10d20840313703cfcd328bec591b4941 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292558 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/12587 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 02:15:02 +0000