| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I901cb35488e08f58cdf97f3a8d0f5a8d03560f86
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33729
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes the need to select ARCH_ARM in SOC Kconfig
Also don't define the default as this result in spurious lines in the
.config.
Change-Id: I1ed4a71599641db606510e5304b9f0acf9b7eb88
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31313
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also adapt all users of these symbols
Change-Id: Ibf924a283d438de49a93ce661b0d9ca1a81cd6d1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The gpio table is only used by depthcharge, and depthcharge rarely
has a need for the "recovery" gpio. On a few boards it does use the
gpio as a signal for confirming physical presence, so on that boards
we'll advertise the board as "presence".
All these strings probably should have been #defines to help avoid
typos (e.g., the "ec_in_rw" in stout seems questionable since everybody
else uses "EC in RW").
Cq-Depend: chromium:1580454
BUG=b:129471321
BRANCH=None
TEST=Local compile and flash (with corresponding changes to depthcharge)
to 2 systems, one with a "presence" gpio and another without. Confirmed
that both systems could enter dev mode.
Change-Id: Id6d62d9e48d3e6646cbc1277ea53f0ca95dd849e
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The "write protect" GPIO's cached value is never actually
read after entering depthcharge. Ensure the value from
get_write_protect_state() is being transferred accurately,
so that we may read this GPIO value in depthcharge without
resampling.
The cached value of the "recovery" GPIO is read only on certain
boards which have a physical recovery switch. Correct some of
the values sent to boards which presumably never read the
previously incorrect value. Most of these inaccuracies are from
non-inverted values on ACTIVE_LOW GPIOs.
BUG=b:124141368, b:124192753, chromium:950273
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ic17a98768703d7098480a9233b752fe5b201bd51
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Drop 'include <string.h>' when it is not used and
add it when it is missing.
Also extra lines removed, or added just before local includes.
Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For Chrome OS (or vboot), The PRESERVE flags should be applied on
following sections:
RO_PRESERVE, RO_VPD, RW_PRESERVE, RW_ELOG, RW_NVRAM, RW_SMMSTORE,
RW_VPD, RO_FSG (b:116326638), SI_GBE (chromium:936768),
SI_PDR (chromium:936768)
With the new PRESERVE flag, we don't need RO_PRESERVE and RW_PRESERVE in
the future. But it's still no harm to use it if there are multiple
sections all needing to be preserved.
BUG=chromium:936768
TEST=Builds google/eve and google/kukui inside Chrome OS source tree.
Also boots successfully on eve and kukui devices.
Change-Id: I6664ae3d955001ed14374e2788d400ba5fb9b7f8
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
MMIO operations are arch-agnostic so the include
path should not be arch/.
Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I91158452680586ac676ea11c8589062880a31f91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31692
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When <symbols.h> was first introduced, it only declared a handful of
regions and we didn't expect that too many architectures and platforms
would need to add their own later. However, our amount of platforms has
greatly expanded since, and with them the need for more special memory
regions. The amount of code duplication is starting to get unsightly,
and platforms keep defining their own <soc/symbols.h> files that need
this as well.
This patch adds another macro to cut down the definition boilerplate.
Unfortunately, macros cannot define other macros when they're called, so
referring to region sizes as _name_size doesn't work anymore. This patch
replaces the scheme with REGION_SIZE(name).
Not touching the regions in the x86-specific <arch/symbols.h> yet since
they don't follow the standard _region/_eregion naming scheme. They can
be converted later if desired.
Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This removes CEIL_DIV and div_round_up() altogether and
replace it by DIV_ROUND_UP defined in commonlib/helpers.h.
Change-Id: I9aabc3fbe7834834c92d6ba59ff0005986622a34
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Ibdff50761a205d936b0ebe067f418be0a2051798
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hellsenberg <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: David Guckian
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: Iab0bd1c5482331a0c048a05ab806bf5c4dbda780
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29303
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I17c4fc4e3e2eeef7c720c6a020b37d8f7a0f57a4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ib3aafcc586b1631a75f214cfd19706108ad8ca93
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29285
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6182da172ae2f4107a9b5d8190e4b3b10ed2f0b9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
* Remove 2nd software stack in pc80 drivers directory.
* Create TSPI interface for common usage.
* Refactor TSS / TIS code base.
* Add vendor tss (Cr50) directory.
* Change kconfig options for TPM to TPM1.
* Add user / board configuration with:
* MAINBOARD_HAS_*_TPM # * BUS driver
* MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2
* Add kconfig TPM user selection (e.g. pluggable TPMs)
* Fix existing headers and function calls.
* Fix vboot for interface usage and antirollback mode.
Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/24903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use of device_t has been abandoned in ramstage.
Change-Id: I8e549e4222ae2ed6b9c46f81c5b5253e8b227ee8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch switches the board_id and ram_code helper framework to use
weak functions rather than Kconfigs to determine whether the board
supplies these IDs. This cuts down on the amount of boilerplate Kconfigs
many boards have to set and also gives them more flexibility, such as
being able to determine at runtime whether a given ID is present.
Change-Id: I97d6d1103ebb2a2a7cf1ecfc45709c7e8c1a5cb0
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22695
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Merge the different coreboot table strapping ID structures into one
because they're really just all the same, and I want to add more. Make
the signature of the board_id() function return a uint32_t because
that's also what goes in the coreboot table. Add a printk to the generic
code handling strapping IDs in ramstage so that not every individual
mainboard implementation needs its own print. (In turn, remove one such
print from fsp1_1 code because it's in the way of my next patch.)
Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's sometimes hard to find the code name of a Chromebook. Add the
marketing names to Kconfig, since they are easily available.
Information (mostly) taken from:
https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices
Unknown boards (unreleased, etc.):
* Fizz
* Foster
* Nasher, Coral
* Purin
* Rotor
* Rowan
* Scarlet, Nefario
* Soraka
* Urara
* Veyron_Rialto
Baseboards:
* Glados
* Gru
* Jecht
* Kahlee
* Nyan
* Oak
* Poppy
* Rambi
* Zoombini
White label boards:
* Enguarde
* Heli
* Relm, Wizpig
TODO: How does this interact with the board_status code?
Change-Id: I20a36e23bd3eea8c526a0b3b53cd676cebf9cd86
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Split `i2c.h` into three pieces to ease reuse of the generic defi-
nitions. No code is changed.
* `i2c.h` - keeps the generic definitions
* `i2c_simple.h` - holds the current, limited to one controller driver
per board, devicetree independent I2C interface
* `i2c_bus.h` - will become the devicetree compatible interface for
native I2C (e.g. non-SMBus) controllers
Change-Id: I382d45c70f9314588663e1284f264f877469c74d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I1f906c8c465108017bc4d08534653233078ef32d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There are many good reasons why we may want to run some sort of generic
callback before we're executing a reset. Unfortunateley, that is really
hard right now: code that wants to reset simply calls the hard_reset()
function (or one of its ill-differentiated cousins) which is directly
implemented by a myriad of different mainboards, northbridges, SoCs,
etc. More recent x86 SoCs have tried to solve the problem in their own
little corner of soc/intel/common, but it's really something that would
benefit all of coreboot.
This patch expands the concept onto all boards: hard_reset() and friends
get implemented in a generic location where they can run hooks before
calling the platform-specific implementation that is now called
do_hard_reset(). The existing Intel reset_prepare() gets generalized as
soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now
easily be added later if necessary). We will also use this central point
to ensure all platforms flush their cache before reset, which is
generally useful for all cases where we're trying to persist information
in RAM across reboots (like the new persistent CBMEM console does).
Also remove cpu_reset() completely since it's not used anywhere and
doesn't seem very useful compared to the others.
Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19789
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers
that support a linear framebuffer. Some related settings moved to the
drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are
hardcoded.
Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/19800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch attempts to finish the separation between CONFIG_VBOOT and
CONFIG_CHROMEOS by moving the remaining options and code (including
image generation code for things like FWID and GBB flags, which are
intrinsic to vboot itself) from src/vendorcode/google/chromeos to
src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig
options, and clean up menuconfig visibility for them (i.e. some options
were visible even though they were tied to the hardware while others
were invisible even though it might make sense to change them).
CQ-DEPEND=CL:459088
Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18984
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The virtualized developer switch was invented five years ago and has
been used on every vboot system ever since. We shouldn't need to specify
it again and again for every new board. This patch flips the Kconfig
logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with
CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to
set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the
latter for Lumpy which seems to have been omitted incorrectly, and hide
it from menuconfig since it's a hardware parameter that shouldn't be
configurable.)
Since almost all our developer switches are virtual, it doesn't make
sense for every board to pass a non-existent or non-functional developer
mode switch in the coreboot tables, so let's get rid of that. It's also
dangerously confusing for many boards to define a get_developer_mode()
function that reads an actual pin (often from a debug header) which will
not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set.
Therefore, this patch removes all those non-functional instances of that
function. In the future, either the board has a physical dev switch and
must define it, or it doesn't and must not.
In a similar sense (and since I'm touching so many board configs
anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC.
Instead, it should just be assumed by default whenever a Chrome EC is
present in the system. This way, it can also still be overridden by
menuconfig.
CQ-DEPEND=CL:459701
Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18980
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of defining the same functions for reading/clearing boot-mode
switches from EC in every mainboard, add a common infrastructure to
enable common functions for handling boot-mode switches if
GOOGLE_CHROMEEC is being used.
Only boards that were not moved to this new infrastructure are those
that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific
mechanism for reading boot-mode switches.
BUG=None
BRANCH=None
TEST=abuild compiles all boards successfully with and without ChromeOS
option.
Change-Id: I267aadea9e616464563df04b51a668b877f0d578
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17449
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Kconfig hex values don't need to be in quotes, and should start with
'0x'. If the default value isn't set this way, Kconfig will add the
0x to the start, and the entry can be added unnecessarily to the
defconfig since it's "different" than what was set by the default.
A check for this has been added to the Kconfig lint tool.
Change-Id: I86f37340682771700011b6285e4b4af41b7e9968
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16834
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This corrects indentation for sdram configs in nyan_blaze.
Change-Id: Ia9ad2a37c6e3b79e1260f490db893244c32685b6
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/16342
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The BOOT_MEDIA_SPI_CHIP_SELECT option is not used in any of the
code. Remove its usage.
BUG=chrome-os-partner:56151
Change-Id: I522b62a2371b8a167ce17c48117669390cda14cd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16185
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
1. Currenty, boot reason is being added to elog only for some
ARM32/ARM64 platforms. Change this so that boot reason is logged by
default in elog for all devices which have CHROMEOS selected.
2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that
want to add details about watchdog reset in elog. This requires a
special region WATCHDOG to be present in the memlayout.
3. Remove calls to elog add boot reason and watchdog reset from
mainboards.
BUG=chrome-os-partner:55639
Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15897
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.
BUG=chrome-os-partner:55639
Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
All mainboards (nyans) utilizing the cache_policy option
has it set to DCACHE_WRITETHROUGH. This option is for setting
the framebuffer's cache attribute. However, this option is
reliant on an architecture-specific enumeration. Just remove
the option and use DCACHE_WRITETHROUGH across the board. If
someone wants to reconfigure it at a later date one can
introduce a non-architecture specific option.
Change-Id: I6a0848231f5e28d36ec2d56b239bed67619fe5a7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15838
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
A call to early_mainboard_init is already present in verstage, thus it
is only necessary to call it from romstage when not in vboot context.
Change-Id: I2e0b5a369c5fb24efae4ac40d83a31f5cf4a078d
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15450
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The FLASHMAP_OFFSET config variable is used in lib/fmap.c, however
the fmdtool creates a fmap_config.h with a FMAP_OFFSET #define.
Those 2 values are not consistent. Therefore, remove the Kconfig
variable and defer to the #define generated by fmdtool.
Change-Id: Ib4ecbc429e142b3e250106eea59fea1caa222917
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14765
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: Ied67c5079a7f49594edb39caf61fe7f386c3f80d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14323
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change the existing chromeos.fmd files and the dts-to-fmd script to mark
RW_LEGACY as CBFS, so it's properly "formatted".
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I76de26032ea8da0c7755a76a01e7bea9cfaebe23
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 717a00c459906fa87f61314ea4541c31b50539f4
Original-Change-Id: I4b037b60d10be3da824c6baecabfd244eec2cdac
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336403
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14240
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
A long time ago many Chrome OS boards had pages full of duplicated
boilerplate code for the fill_lb_gpios() function, and we spent a lot of
time bikeshedding a proper solution that passes a table of lb_gpio
structs which can be concisely written with a static struct initializer
in http://crosreview.com/234648. Unfortunately we never really finished
that patch and in the mean time a different solution using the
fill_lb_gpio() helper got standardized onto most boards.
Still, that solution is not quite as clean and concise as the one we had
already designed, and it also wasn't applied consistently to all recent
boards (causing more boards with bad code to get added afterwards). This
patch switches all boards newer than Link to the better solution and
also adds some nicer debug output for the GPIOs while I'm there.
If more boards need to be converted from fill_lb_gpio() to this model
later (e.g. from a branch), it's quite easy to do with:
s/fill_lb_gpio(gpio++,\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\));/\t{\1, \2, \4, \3},/
Based on a patch by Furquan Shaikh <furquan@google.com>.
BUG=None
BRANCH=None
TEST=Booted on Oak. Ran abuild -x.
Change-Id: I449974d1c75c8ed187f5e10935495b2f03725811
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14226
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The lint script didn't catch that these mainboard directories didn't
have board_info files.
Add all missing board_info.txt files
Change-Id: Ib1d61a3c04e91b22480527885faf60c22093d98a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14117
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Nyan is an old board that was committed before several core code
modernizations to timestamp and CBFS code. Not all of those later
patches were correctly integrated with old boards like this, and the
core code has evolved to a point where it doesn't actually boot anymore.
This patch fixes that issue and brings the Nyan boards more in line with
how later ARM platforms look.
BRANCH=None
BUG=None
TEST=My Blaze boots again.
Change-Id: I3277a2f59ad8ed47063f7f6b556685313b1446f8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 6a1679e342a7adc2b2371b6e3f69a898a7a5c717
Original-Change-Id: I2a0a2abbd79b4b5f756125dcbb6cbd9441016d4e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328543
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13832
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This makes the test IDs the default, taken from depthcharge
master (board/*/fmap.dts, hwid property).
Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13634
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
These are generated from depthcharge's board/*/fmap.dts using the
dts-to-fmd.sh script.
One special case is google/veyron's chromeos.fmd, which is used for a
larger set of boards - no problem since the converted fmd was the same
for all of them.
Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT
region ends up at the beginning of flash). This becomes necessary
because we're working without a real cbfs master header (exists for
transition only), which carved out the space for the offset.
Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Move the CHROMEOS dependent symbols VIRTUAL_DEV_SWITCH and
VBOOT_DYNAMIC_WORK_BUFFER under the CHROMEOS config options for the
mainboards that use them.
Change-Id: Iad126cf045cb3a312319037aff3c4b1f15f6529d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Add 'select MAINBOARD_HAS_NATIVE_VGA_INIT' which is just used as a gate
symbol to display MAINBOARD_DO_NATIVE_VGA_INIT to the mainboards that
are already selecting MAINBOARD_DO_NATIVE_VGA_INIT.
Since MAINBOARD_HAS_NATIVE_VGA_INIT is not used in any code, this should
not have any other effects.
This fixes the warning:
warning: (BOARD_SPECIFIC_OPTIONS) selects MAINBOARD_DO_NATIVE_VGA_INIT
which has unmet direct dependencies (VENDOR_ASUS && BOARD_ASUS_KFSN4_DRE
|| MAINBOARD_HAS_NATIVE_VGA_INIT)
Change-Id: I8ceee69ebae90dc32f55df58c2e80fe25397f049
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add CHROMEOS dependencies to selects for the following Kconfig
symbols:
CHROMEOS_RAMOOPS_DYNAMIC
CHROMEOS_RAMOOPS_NON_ACPI
CHROMEOS_VBNV_CMOS
CHROMEOS_VBNV_EC
CHROMEOS_VBNV_FLASH
EC_SOFTWARE_SYNC
LID_SWITCH
RETURN_FROM_VERSTAGE
SEPARATE_VERSTAGE
VBOOT_DISABLE_DEV_ON_RECOVERY
VBOOT_EC_SLOW_UPDATE
VBOOT_OPROM_MATTERS
VBOOT_STARTS_IN_BOOTBLOCK
WIPEOUT_SUPPORTED
This gets rid of these sorts of Kconfig errors:
warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has
unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS)
Note: These two boards would never actually have CHROMEOS enabled:
intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out
google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS
Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11272
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Initializing timestamps and writing the "start romstage" timestamp already
happens earlier.
One question to sort out is what to do about the migration into cbmem, but at
least this compiles again.
Change-Id: Ie8a0b7998c6c9da71f036857987f3c781385034f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
MAINBOARD_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere
(with no overlap), and never read. Remove it.
Change-Id: Ica1f16182b556dbf4a3b747237af74bcc4c0608c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10254
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
vboot_verify_firmware() was only defined to ease upstreaming.
It was only an empty inline as it is so remove it. Additionally,
vboot2 does not require romstage_handoff so there's no need in
adding it for the nyan boards.
Change-Id: I4d84ac9fb60c756cf10742f26503f7f11af5f57b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10155
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The vboot mechanism will be implemented within the program loader
subsystem to make it transparent to mainboards and chipsets.
Change-Id: Icd0bdcba06cdc30591f9b25068b3fa3a112e58fb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10094
Tested-by: build bot (Jenkins)
|
|
These options will need to just be selected in within
the .config files. There's not need in duplicating all
these options.
Change-Id: I7b670bc59a3b35e39eee4faecaf4aa779d47a3bb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9959
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There's no need to have the VBOOT2_VERIFY_FIRMWARE
distinction because it's the only game in town.
Change-Id: I82aab665934c27829e1a04115bf499ae527a91aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9958
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For boards with MAINBOARD_HAS_CHROMEOS, we should also
state what kind of storage is available for vboot's
non-volatile data.
The flags are taken from the chromium repository and
have no effect with CHROMEOS disabled.
Change-Id: I1747ad26c8c7f6d4076740ec2800dbd52c5d6b3d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9952
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch switches the mainboards with board id straps
to use BOARD_ID_AUTO instead of BOARD_ID_SUPPORT.
On urara, which does not have those straps, the option is
removed. (And re-added for urara derivatives through setting
the config option BOARD_ID_MANUAL
BRANCH=none
BUG=chrome-os-partner:37593
TEST=emerg-nyan_big coreboot, emerge-urara coreboot, emerge-buranku coreboot
Change-Id: I5ac4024c6f1f9b9d7a5179d88722c69b23b82bbd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 22a470698f9c9ed275aa8150a5bb8d8cf368b050
Original-Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Change-Id: I48c291ad6f255a28c833bebc2638bfafa2782e74
Original-Reviewed-on: https://chromium-review.googlesource.com/262935
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: http://review.coreboot.org/9906
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a raw application of the following spatch to src/:
@@
expression A, V;
@@
- writel(V, A)
+ write32(A, V)
@@
expression A, V;
@@
- writew(V, A)
+ write16(A, V)
@@
expression A, V;
@@
- writeb(V, A)
+ write8(A, V)
@@
expression A;
@@
- readl(A)
+ read32(A)
@@
expression A;
@@
- readb(A)
+ read8(A)
BRANCH=none
BUG=chromium:444723
TEST=None (depends on next patch)
Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6
Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254864
Reviewed-on: http://review.coreboot.org/9836
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change switches all mainboard vendors and mainboards
to be autoincluded by Kconfig, rather than having to be mentioned
explicitly.
This means, vendor and mainboard directories are becoming more
"drop in", e.g. be placed in the coreboot directory hierarchy
without having to modify any higher level coreboot files.
The long term plan is to enable out of tree mainboards / components
to be built with a given coreboot version (given that the API did
not change)
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a
Reviewed-on: http://review.coreboot.org/9295
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
- Hynix H5TC4G63CFR-PBA, ramcode = 5
BUG=chrome-os-partner:34695
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: I53f9ebd9c38c645d1eb8b685d39e8beb55bd3c6a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ee6fdcc28402fe324d08b713498488d863d1d30f
Original-Change-Id: I829d4e1f992eadd445c313729eb4bca5ce602f53
Original-Reviewed-on: https://chromium-review.googlesource.com/245947
Original-Reviewed-by: Neil Chen <neilc%nvidia.com@gtempaccount.com>
Original-Tested-by: Neil Chen <neilc%nvidia.com@gtempaccount.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Neil Chen <neilc%nvidia.com@gtempaccount.com>
Reviewed-on: http://review.coreboot.org/9736
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This BCT table is the same as "ramcode == 1", and has been pass the stress
test with this new Micron type.
-Micron MT41K256M16LY-107:N, ramcode = 4
BUG=chrome-os-partner:32071
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: I80990fec6faf5dd2b8090658d865cc8dde31b753
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bce2bf1fd518077e06d70d78a65d58ddef7b7bc6
Original-Change-Id: I2c0b28fdafb5299784519e641aa4edb53d0c36b2
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236514
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9636
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Some projects (like ChromeOS) put more content than described by CBFS
onto their image. For top-aligned images (read: x86), this has
traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the
area actually managed by CBFS, as opposed to ROM_SIZE) that is used to
calculate the CBFS entry start offset. On bottom-aligned boards, many
define a fake (smaller) ROM_SIZE for only the CBFS part, which is not
consistently done and can be an issue because ROM_SIZE is expected to be
a power of two.
This patch changes all non-x86 boards to describe their actual
(physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a
mainboard Kconfig select (which is the correct place to declare
unchangeable physical properties of the board). It also changes the
cbfstool create invocation to use CBFS_SIZE as the -s parameter for
those architectures, which defaults to ROM_SIZE but gets overridden for
special use cases like ChromeOS. This has the advantage that cbfstool
has a consistent idea of where the area it is responsible for ends,
which offers better bounds-checking and is needed for a subsequent fix.
Also change the FMAP offset to default to right behind the (now
consistently known) CBFS region for non-x86 boards, which has emerged as
a de-facto standard on those architectures and allows us to reduce the
amount of custom configuration. In the future, the nightmare that is
ChromeOS's image build system could be redesigned to enforce this
automatically, and also confirm that it doesn't overwrite any space used
by CBFS (which is now consistently defined as the file size of
coreboot.rom on non-x86).
CQ-DEPEND=CL:231576,CL:231475
BRANCH=None
BUG=chromium:422501
TEST=Built and booted on Veyron_Pinky.
Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71
Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229974
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9619
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This CL makes slight changes to the ChromeOS-specific GPIO definitions
of Tegra and Rockchip boards to prepare them for new features in
depthcharge. It adds descriptions for the EC in RW and reset GPIOs,
changes the value Tegra writes into the (previously unused) 'port' field
to describe the complete GPIO information, and removes code to sample
some GPIOs that don't need to be sampled at coreboot time (to help
depthcharge detect errors and avoid using a stale value for something
that should always represent the current state).
BRANCH=None
BUG=None
TEST=None (tested together with depthcharge patches)
Change-Id: I3774979dbe7cacce4932c85810596d80e5664028
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: df295d0432fbf623597cf36ebb170bd4f63ee08d
Original-Change-Id: I36bb16c8d931f862bf12a5b862b10cf18d738ddd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231222
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9570
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This moves vboot1 and vboot2 files to their designated directory. Common
code stays in vendorcode/google/chromeos.
BUG=none
BRANCH=none
TEST=built cosmos, veyron_pinky, rush_ryu, nyan_blaze, samus, parrot,
lumpy, daisy_spring, and storm.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Ia9fb41ba30930b79b222269acfade7ef44b23626
Original-Reviewed-on: https://chromium-review.googlesource.com/222874
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit cbfef9ad40776d890e2149b9db788fe0b387d210)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia73696accfd93cc14ca83516fa77f87331faef51
Reviewed-on: http://review.coreboot.org/9433
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This deprecates TERTIARY_BOARD_ID. Instead, a board will set
BOARD_ID_SUPPORT (the ones affected already do) which will set
GENERIC_GPIO_SUPPORT and compile the generic GPIO library.
The user is expected to handle the details of how the ID is encoded.
BUG=none
BRANCH=none
TEST=Compiled for peppy, nyan*, storm, and pinky
Change-Id: Iaf1cac6e90b6c931100e9d1b6735684fac86b8a8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93db63f419f596160ce2459eb70b3218cc83c09e
Original-Change-Id: I687877e5bb89679d0133bed24e2480216c384a1c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228322
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9413
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch makes a few cosmetic changes:
- Rename tristate_gpios.c to gpio.c since it will soon be used for
binary GPIOs as well.
- Rename gpio_get_tristates() to gpio_base3_value() - The binary
version will be called gpio_base2_value().
- Updates call sites.
- Change the variable name "id" to something more generic.
BUG=none
BRANCH=none
TEST=compiled for veyron_pinky and storm
Change-Id: Iab7e32f4e9d70853f782695cfe6842accff1df64
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c47d0f33ea1a6e9515211b834009cf47a171953f
Original-Change-Id: I36d88c67cb118efd1730278691dc3e4ecb6055ee
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228324
Reviewed-on: http://review.coreboot.org/9411
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The function to read board IDs from tristate GPIOs currently supports
two output modes: a normal base-3 integer, or a custom format where
every two bits represent one tristate pin. Each board decides which
representation to use on its own, which is inconsistent and provides
another possible gotcha to trip over when reading unfamiliar code.
The two-bits-per-pin format creates the additional problem that a
complete list of IDs (such as some boards use to build board-ID tables)
necessarily has "holes" in them (since 0b11 does not correspond to a
possible pin state), which makes them extremely tricky to write, read
and expand. It's also very unintuitive in my opinion, although it was
intended to make it easier to read individual pin states from a hex
representation.
This patch switches all boards over to base-3 and removes the other
format to improve consistency. The tristate reading function will just
print the pin states as they are read to make it easier to debug them,
and we add a new BASE3() macro that can generate ternary numbers from
pin states. Also change the order of all static initializers of board ID
pin lists to write the most significant bit first, hoping that this can
help clear up confusion about the endianness of the pins.
CQ-DEPEND=CL:219902
BUG=None
TEST=Booted on a Nyan_Blaze (with board ID 1, unfortunately the only one
I have). Compiled on Daisy, Peach_Pit, Nyan, Nyan_Big, Nyan_Blaze, Rush,
Rush_Ryu, Storm, Veryon_Pinky and Falco for good measure.
Change-Id: I3ce5a0829f260db7d7df77e6788c2c6d13901b8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2fa9545ac431c9af111ee4444d593ee4cf49554d
Original-Change-Id: I6133cdaf01ed6590ae07e88d9e85a33dc013211a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219901
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9401
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We've had gpiolib.h which defines a few common GPIO access functions for
a while, but it wasn't really complete. This patch adds the missing
gpio_output() function, and also renames the unwieldy
gpio_get_in_value() and gpio_set_out_value() to the much easier to
handle gpio_get() and gpio_set(). The header is renamed to the simpler
gpio.h while we're at it (there was never really anything "lib" about
it, and it was presumably just chosen due to the IPQ806x include/
conflict problem that is now resolved).
It also moves the definition of gpio_t into SoC-specific code, so that
different implementations are free to encode their platform-specific
GPIO parameters in those 4 bytes in the most convenient way (such as the
rk3288 with a bitfield struct). Every SoC intending to use this common
API should supply a <soc/gpio.h> that typedefs gpio_t to a type at most
4 bytes in length. Files accessing the API only need to include <gpio.h>
which may pull in additional things (like a gpio_t creation macro) from
<soc/gpio.h> on its own.
For now the API is still only used on non-x86 SoCs. Whether it makes
sense to expand it to x86 as well should be separately evaluated at a
later point (by someone who understands those systems better). Also,
Exynos retains its old, incompatible GPIO API even though it would be a
prime candidate, because it's currently just not worth the effort.
BUG=None
TEST=Compiled on Daisy, Peach_Pit, Nyan_Blaze, Rush_Ryu, Storm and
Veyron_Pinky.
Change-Id: Ieee77373c2bd13d07ece26fa7f8b08be324842fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9e04902ada56b929e3829f2c3b4aeb618682096e
Original-Change-Id: I6c1e7d1e154d9b02288aabedb397e21e1aadfa15
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220975
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9400
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch aligns tegra124 to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Nyan, Nyan_Big and Nyan_Blaze.
Change-Id: Ia82ab86b2af903690cc6c9d310f7bdda3425ea7c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d23774e071ec22781991ff20fbf63802f620c88
Original-Change-Id: Ia126cff8590117788d1872e50608c257d2659c1f
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224504
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9326
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch creates a new mechanism to define the static memory layout
(primarily in SRAM) for a given board, superseding the brittle mass of
Kconfigs that we were using before. The core part is a memlayout.ld file
in the mainboard directory (although boards are expected to just include
the SoC default in most cases), which is the primary linker script for
all stages (though not rmodules for now). It uses preprocessor macros
from <memlayout.h> to form a different valid linker script for all
stages while looking like a declarative, boilerplate-free map of memory
addresses to the programmer. Linker asserts will automatically guarantee
that the defined regions cannot overlap. Stages are defined with a
maximum size that will be enforced by the linker. The file serves to
both define and document the memory layout, so that the documentation
cannot go missing or out of date.
The mechanism is implemented for all boards in the ARM, ARM64 and MIPS
architectures, and should be extended onto all systems using SRAM in the
future. The CAR/XIP environment on x86 has very different requirements
and the layout is generally not as static, so it will stay like it is
and be unaffected by this patch (save for aligning some symbol names for
consistency and sharing the new common ramstage linker script include).
BUG=None
TEST=Booted normally and in recovery mode, checked suspend/resume and
the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and
Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies
with ToT and looked for red flags.
Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614
Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213370
Reviewed-on: http://review.coreboot.org/9283
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The existing cpu_reset does board-wide reset, thus, should be renamed.
BUG=none
BRANCH=none
TEST=Built firmware for Nyans. Ran faft on Blaze.
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I5dc4fa9bae328001a897a371d4f23632701f1dd9
Original-Reviewed-on: https://chromium-review.googlesource.com/212982
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 29753b9c1dfe7ecd156042d69b74e9fe4244f455)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I98eca40c50637bda01a9029a904bca6880cd081f
Reviewed-on: http://review.coreboot.org/9179
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Indicate to rest of coreboot that MAINBOARD_HAS_CHROMEOS
instead of auto-selecting it.
Change-Id: I61cde263f4ad7bd6758a61fc54c456c2ad2f343e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9153
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change updated the EMC tables with emc_reg_tool 5.0.18,
for below memory SKUs:
- Hynix H5TC4G63AFR-PBR 2GB, ramcode = 0
- Micron MT41K256M16HA-125 2GB, ramcode = 1
- Samsung K4B4G1646Q-HYK0 2GB, ramcode = 2
- Hynix H5TC8G63AFR-PBR 4GB, ramcode = 8
- Micron MT41K512M16TNA-125 4GB, ramcode = 9
- Samsung K4B8G1646Q-MYKO 4GB, ramcode = 10
BUG=chrome-os-partner:30963
BRANCH=blaze
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: Iee329ff09e35cddd3c868c0460a38ef56b2ac5bb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 158872ff7c0dd5274cfa8d63ec17b4423a4592ce
Original-Change-Id: I44adfdb5b433e37e2d25095acdcce3d9c14eb897
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210024
Original-Tested-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/9116
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Pull out the common usb setup utmip functions from t124 into tegra usb.h. These
can be reused for t132 as well.
BUG=chrome-os-partner:31293
BRANCH=None
TEST=Compiles successfully for nyan, big and blaze
Change-Id: Idddd40e409b56875436db6918d05f2889d83870b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12f12cb30a033cce645f53457d13a987aeec22a1
Original-Change-Id: I83f83bafad0f52ad651fe5989430f41142803f2b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211200
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8927
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The name was changed due to review comments misunderstanding, it
should be restored to properly convey what the function does.
BUG=chrome-os-partner:30489
TEST=verified that Storm still properly reports board ID
Change-Id: Iba33cf837e137424bfac970b0c9764d26786be9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c0fff28c6ebf255cb9cf9dfe4c961d7a25bb13ff
Original-Change-Id: I4bd63f29afbfaf9f3e3e78602564eb52f63cc487
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211413
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8979
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
With CONFIG_RETURN_FROM_VERSTAGE false, the verstage loads the romstage over
the bootblock, then exits to the romstage. this is necessary for some SOC
(e.g. tegra124) which runs the bootblock on a different architecture.
With CONFIG_RETURN_FROM_VERSTAGE true, the verstage returns to the bootblock.
Then, the bootblock loads the romstage over the verstage and exits to the
romstage. this is probably necessary for some SOC (e.g. rockchip) which does not
have SRAM big enough to fit the verstage and the romstage at the same time.
BUG=none
TEST=Built Blaze with USE=+/-vboot2. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I673945c5e21afc800d523fbb25d49fdc83693544
Original-Reviewed-on: https://chromium-review.googlesource.com/212365
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Note: This purposefully is probably broken in vendorcode/google/chromeos
as I'm just trying to set a base for dropping more patches in. The vboot
paths will have to change from how they are currently constructed.
(cherry picked from commit 4fa17395113d86445660091413ecb005485f8014)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9117434ce99695f9b7021a06196d864f180df5c9
Reviewed-on: http://review.coreboot.org/8881
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
this change reduces the code duplication of the bootblock and the romstages for
Nyans.
BUG=none
TEST=Built Nyan, Big, and Blaze. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: dnojiri@chromium.org (Daisuke Nojiri)
Original-Change-Id: Ieb9dac3b061a2cf46c63afb2f31eb67ab391ea1a
Original-Reviewed-on: https://chromium-review.googlesource.com/214050
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit f3413d39458f03895fe4963a41285f71d81bcf5f)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I912f63b12321aa26a7add302fc8a6c4e607330ef
Reviewed-on: http://review.coreboot.org/8880
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
TEST=Built Blaze with USE=+/-vboot2. Ran faft: CorruptBothFwAB,
CorruptBothFWSigAB, CorruptFwBodyA/B, CoccurptFwSigA/B, DevBootUSB, DevMode,
TryFwB, UserRequestRecovery, SelfSignedBoot, RollbackFirmware.
BUG=None
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I45a1efd4d55fde37cc67fc02642fed0bc9366469
Original-Reviewed-on: https://chromium-review.googlesource.com/205236
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 0a9e7f099251c33ce286fa8d704a3e021eac4d3e)
Change-Id: I5f61c03c66ca83a5837c14378905ba178aba5300
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8655
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
These boards are supposed to be able to determine the board ID at run
time based on GPIO settings.
BUG=chrome-os-partner:30489
TEST=verified that all boards build. Checked that storm proto0 reports
board ID of 0 on the console
Original-Change-Id: Iadd758a799d69e1e34579d7d495378856b64c45b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210119
(cherry picked from commit f4d41ddf906c1bf0d10da38011998fa0a630c332)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0d5f94d3428157a70f0a9d711b57432e3f796733
Reviewed-on: http://review.coreboot.org/8722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For the majority of Chrome OS boards there is no need to include board
ID calculation in any stage but ramstage, where the ID should be
available for inclusion into the coreboot table.
BUG=chrome-os-partner:30489
TEST=build only, no other tests yet
Change-Id: I1451d52382bc48cc126d40267e0f61712f4a6d4b
Original-Change-Id: Ib9c06698a399d31e79a9b14143343ba2ad46d0fb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210117
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 27dd40e85bfcd0a38f388bad4d79f5fbb77a7566)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8720
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Some platforms use tertiary interpretation of GPIO input state to
increase number of distinct values represented by a limited number of
GPIOs. The three states are
- external pull down (interpreted as 0)
- external pull up (1)
- not connected (2)
This has been required by Nvidia devices so far, but Exynos and
Ipq8086 platforms need this too.
This patch moves the function reading the tertiary state into the
library and exposes the necessary GPIO API functions in a new include
file. The functions are still supposed to be provided by platform
specific modules.
The function interpreting the GPIO states has been modified to allow
to interpret the state either as a true tertiary number or as a set
two bit fields.
Since linker garbage collection is not happening when building x86
targets, a new configuration option is being added to include the new
module only when needed.
BUG=chrome-os-partner:30489
TEST=verified that nyan_big still reports proper revision ID.
Change-Id: Ib55122c359629b58288c1022da83e6c63dc2264d
Original-Change-Id: I243c9f43c82bd4a41de2154bbdbd07df0a241046
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209673
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c79ef1c545d073eaad69e6c8c629f9656b8c2f3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8717
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of sprinkling the cbfs calls around (as well as getting
return values incorrect) use the common run_ramstage() to perform
the necessary work to load and run ramstage.
Change-Id: I37b1e94be36ef7a43efe65b2db110742fa105169
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8710
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There is no point in duplicating boardid.h per board - they are all
the same. Let's keep a single instance in the common include directory
and let the linker report a problem if one tries using this function
on a board where it is not supported.
BUG=chrome-os-partner:30489
TEST=verified that coreboot builds fine for nyan_big and nyan_blaze.
Original-Change-Id: Ifbe9c2287a1d828d4db74c637d1d02047ac4da25
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209699
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 589e6415faf18ca6aaf44da343dd33eadc8a53d3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8eef89cb822611a0050e5a50fc4b970eebd8d962
Reviewed-on: http://review.coreboot.org/8666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch removes a chunk of romstage code from Tegra and all Nyan
boards that was supposed to enable some LCD power rails early, but never
really worked. The dev_find_slot() function can only find PCI devices,
which the CPU cluster is not. Since we're done with Nyan-RO and the
ramstage display code is fine as it is, there is no point in trying to
fix this... but we should remove it from ToT lest someone uses it as a
blueprint to add more dead code to future boards.
BRANCH=None
BUG=None
TEST=None
Original-Change-Id: I6eee256873299429d4e3934fe7d454120390f34d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207720
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit a3df62a3bcefcc20ae59648f5d1f0a01db3c02c6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8deedea5e9787848aae3064509c611bc349313cc
Reviewed-on: http://review.coreboot.org/8638
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I53959eb937c1db3c4211e23a6476340383a33c5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8021
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This replaces need for separate cbmemc_reinit() calls made
via CAR_MIGRATE() and in ramstage.
Change-Id: If7b4d855c75df58b173f26ef3c90a4a7563166d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7859
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze.
BUG=none
Branch=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Ia5353018a0db3dae2e0432b7e6a34d46f81b0ffa
Original-Reviewed-on: https://chromium-review.googlesource.com/206064
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit b420451c71c86bc27784d920f53870ee56ddc0f2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I30c9f0ac44de0a5816b5b8d0ded2dc7d7e77c7a1
Reviewed-on: http://review.coreboot.org/8162
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This patch has a basic structure of vboot2 integration. It supports only Nyans,
which have bootblock architecture and romstage architecture are
compatible from linker's perspective.
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze.
BUG=None
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I4bbd4d0452604943b376bef20ea8a258820810aa
Original-Reviewed-on: https://chromium-review.googlesource.com/204522
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit a6bce0cbed34def60386f3d9aece59e739740c58)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I63ddfbf463c8a83120828ec8ab994f8146f90001
Reviewed-on: http://review.coreboot.org/8160
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
CrOS devices with Chromeos EC need only use hostevent to communicate
recovery assertion to the BIOS. This CL removes wired GPIO from
determining recovery as it appears under certain conditions (cold
reset) the internal PU on the AP isn't strong enough and therefore the
value is sometimes seen as asserted.
BRANCH=none
BUG=chrome-os-partner:29333
TEST=compiles & BIOS no longer responds to rec_mode GPIO during boot.
Original-Change-Id: Ib220cfa5f5bfe7193d555bfd32c0444b063d00f2
Original-Signed-off-by: Todd Broch <tbroch@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202996
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
(cherry picked from commit d9927bcd67b0fb069fde231314e654d727092282)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6e086cbabc884f18deb2791a0f897e332b31032f
Reviewed-on: http://review.coreboot.org/8042
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change updates the cfg file for Hynix/Micron/Samsung 4GB,
792MHz DRAM based on the data generated by t124_emc_reg_tool.
BUG=none
BRANCH=blaze
TEST=emerged coreboot, booted successfully into kernel.
Original-Change-Id: I7621e60d8dcc568e0bb400a6c96b7f8909a15aa6
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/202059
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
(cherry picked from commit 04e74d2fb0fefa6a1786225638380c8831bd9481)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6615e34a17bb372eda9dd0844ecddbcde902ad7c
Reviewed-on: http://review.coreboot.org/8008
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The VDDIO to GEN2 I2C SCL/SDA pins is 1.8V and the external
pull-up voltage is 3.3V (the external 3.3V > I/O 1.8V) thus
the pinmux E_OD bit of these two pins needs to be set to
ensure GEN2 I2C pads work fine on 3.3V.
BRANCH=nyan
BUG=none
TEST=observed voltage drop from 3.3V to 2.36V on gen2 i2c
on blaze w/o this change. the waveform looks good on both
scl/sda pins w/ this change.
Original-Change-Id: I1b97f0c9c7580d1e532c3bdf7ac8690241ee7ee3
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/200996
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 2db39166ec525e56a19746f38a867305a2687365)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0c84eade89311baf0a6f180cb5cc9e2145f6b7ea
Reviewed-on: http://review.coreboot.org/7952
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There is a hub in USB port2 downstream.
BUG=chrome-os-partner:28964
BRANCH=None
TEST=emerge-nyan_blaze coreboot depthcharge chromeos-bootimage and verify usb
port2 is workable
Original-Change-Id: I0e698970729911f401f89594232f9d49e4da93cc
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/200417
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 9316acfe8791585f778eecead95943e6422ca419)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I76e4331ea6e803bfbbddefab449310421c0c1d9c
Reviewed-on: http://review.coreboot.org/7949
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
BUG=none
BRANCH=nyan
TEST=built and booted on Big under various modes, verified that
expected boot mode showed up using "mosys eventlog list"
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I8d98487a2cb910874c8d741008ae59a6c89102e7
Original-Reviewed-on: https://chromium-review.googlesource.com/199691
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 9f4b2574c1af23dcdc01706e9a118441f46a0f97)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ibbf264a1e05323dfddb7cdb270ee6f2d49e83eff
Reviewed-on: http://review.coreboot.org/7946
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This change updates the cfg file for Micron/Samsung 2GB,
792MHz DRAM based on the data generated by t124_emc_reg_tool.
BUG=none
BRANCH=blaze
TEST=emerged coreboot, booted successfully into kernel.
Original-Change-Id: I840cdd967c3b38479946a497a91da89bef5a98ad
Original-Signed-off-by: Jerry Wang <jerryw@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/199296
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
(cherry picked from commit cb70674c6551c8c36d2fd2d220e0f677ed2c6b24)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I11222bc1453a76cc27c2be169be5d3481ed7cfe7
Reviewed-on: http://review.coreboot.org/7902
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
When a watchdog reset happens, the SOC will reset but other parts of the
system might not. That puts the machine in a funny state and may prevent it
from booting properly.
BUG=chrome-os-partner:28559
TEST=Built for nyan, nyan_big and nyan_blaze. Booted normally, through EC
reset, software reset ("reboot" command from the terminal), and through watch
dog reset. Verified that the new code only triggered during the watchdog reset
and that the system rebooted and was able to boot without going into recovery
mode unnecessarily.
BRANCH=nyan
Change-Id: Id92411c928344547fcd97e45063e4aff52d2e9e8
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/198582
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit b298be41c0959c58aeb8be5bf15141549da2504c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7900
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The original sdram-hynix-2GB-792.inc was just copied from nyan
bct file. This change updates the cfg file for Hynix 2GB, 792MHz
DRAM based on the data generated by t124_emc_reg_tool.
BUG=none
BRANCH=blaze
TEST=emerged coreboot, booted successfully into kernel.
Original-Change-Id: I9534b4df6d35193179de124309df12ed830098a0
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197660
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 797dabe54f2679bb5717961dda1947df453eb0f1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie67bedb29d5d9c3a3b58d949ddf9600716c385ec
Reviewed-on: http://review.coreboot.org/7898
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This is a fix for the 'Lost arb' we're seeing on Nyan* during
reboot stress testing. It occurs when we are slamming the
default PMIC registers with pmic_write_reg().
Currently, I've only captured this a few times, and the bus
clear seemed to work, as the PMIC writes continued (where
they'd hang the system before bus clear) for a couple of regs,
then it hangs hard, no messages, no 2nd lost arb, etc. So
I've added code to the PMIC write function that will reset the
SoC if any I2C error occurs. That seems to recover OK, i.e. on
the next reboot the PMIC writes all go thru, boot is OK, kernel
loads, etc.
BUG=chrome-os-partner:28323
BRANCH=nyan
TEST=Tested on nyan. Built for nyan and nyan_big.
Original-Change-Id: I1ac5e3023ae22c015105b7f0fb7849663b4aa982
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197732
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
(cherry picked from commit f445127e2d9e223a5ef9117008a7ac7631a7980c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I584d55b99d65f1e278961db6bdde1845cb01f3bc
Reviewed-on: http://review.coreboot.org/7897
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
When across warm reset, if VDD_3V3_SD_CARD gets power-cycled but VDDIO_SDMMC3
does not, we will get ~1.5V leakage on VDD. To fix that, we reset VDDIO_SDMMC3
to 0 along with VDD_3V3_SD_CARD in Coreboot. Payloads must turn on VDDIO_SDMMC3
explicitly before accessing SD card.
Note the warnings of "VDD_SDMMC must set early" in comment seems only happens on
U-Boot and can be removed.
BUG=chrome-os-partner:27053
BRNACH=nyan
TEST=Ctrl-U to boot from SD card, login and type "reboot", then Ctrl-U to boot
again. Without this patch, system will fail in loading kernel.
Original-Change-Id: I7f85995317d18587d514ea3afcff3bfea0a33e93
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196961
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 2cfdb78d9dc229a3c06f19bbe137d59d923908a4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie7d814e0424478c35a56fbc959437ee6a555684a
Reviewed-on: http://review.coreboot.org/7866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
