summaryrefslogtreecommitdiff
path: root/src/mainboard/google/nyan_blaze
AgeCommit message (Expand)Author
2016-04-13mainboard/google: Update license headersMartin Roth
2016-04-05chromeos.fmd: Mark RW_LEGACY as CBFSPatrick Georgi
2016-04-05chromeos: Simplify fill_lb_gpios even furtherJulius Werner
2016-03-25google/intel mainboards: Add missing board_info.txt filesMartin Roth
2016-03-08nyan: Fix timestamps and CBFS SPI integrationJulius Werner
2016-02-12chromebooks: Define GBB hardware IDsPatrick Georgi
2016-01-21chromeos: import Chrome OS fmapsPatrick Georgi
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-08-26ChromeOS mainboards: Move more Kconfig symbols under CHROMEOSMartin Roth
2015-08-26Google Kconfig: Add MAINBOARD_HAS_NATIVE_VGA_INIT in good placesMartin Roth
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
2015-06-30google/nyan: remove timestamp leftovers from upstreamingPatrick Georgi
2015-06-08Remove empty lines at end of fileElyes HAOUAS
2015-05-21Remove address from GPLv2 headersPatrick Georgi
2015-05-19Remove Kconfig variable that has no effectPatrick Georgi
2015-05-11chromeos: remove vboot_verify_firmware()Aaron Durbin
2015-05-05vboot: remove uses of vboot2_verify_firmware()Aaron Durbin
2015-04-28boards: remove VBOOT_(REFCODE|RAMSTAGE|ROMSTAGE)_INDEXAaron Durbin
2015-04-28chromeos: remove VBOOT2_VERIFY_FIRMWARE optionAaron Durbin
2015-04-22mainboards: Add CHROMEOS_VBNV_* where appropriatePatrick Georgi
2015-04-22switch mainboards over to use BOARD_ID_AUTOStefan Reinauer
2015-04-21arm(64): Globally replace writel(v, a) with write32(a, v)Julius Werner
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
2015-04-17blaze: add new Hynix 2GB BCTNeil Chen
2015-04-15blaze: add new Micron 2GB BCTNeil Chen
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
2015-04-13nyan/rush/veyron: Align ChromeOS GPIOs to new modelJulius Werner
2015-04-10vboot: move vboot files to designated directoryDaisuke Nojiri
2015-04-10gpio: decouple tristate gpio support from board IDDavid Hendricks
2015-04-10gpio: cosmetic changes to tristate_gpios.cDavid Hendricks
2015-04-10gpio: Remove non-ternary tristate mode, make ternaries easierJulius Werner
2015-04-10gpio: Extend common GPIO header, simplify function namesJulius Werner
2015-04-08tegra124: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
2015-04-02Nyans: replace cpu_reset with hard_resetDaisuke Nojiri
2015-03-30google/nyan_blaze: Don't auto select CHROMEOSAaron Durbin
2015-03-28blaze: update EMC BCT tableNeil Chen
2015-03-26tegra: Clean up USB codeFurquan Shaikh
2015-03-26Restore name of the function reading tertiary GPIO statesVadim Bendebury
2015-03-24vboot2: separate verstage from bootblockDaisuke Nojiri
2015-03-24nyans: reduce code duplication in bootblock and romstagesDaisuke Nojiri
2015-03-23vboot2: translate shared data to hand off to depthchargeDaisuke Nojiri
2015-03-23Enable publishing of board ID where supportedVadim Bendebury
2015-03-23Include board ID calculations only when necessaryVadim Bendebury
2015-03-23Generalize revision number calculation functionVadim Bendebury
2015-03-20romstages: use common run_ramstage()Aaron Durbin
2015-03-13Use a common boardid.h instead of per board copiesVadim Bendebury
2015-03-13nyan: Remove broken setup_display() from romstageJulius Werner
2015-03-10ARM romstages: Support and fix COLLECT_TIMESTAMPSKyösti Mälkki
2015-01-27CBMEM: Move cbmemc_reinit()Kyösti Mälkki
2015-01-27vboot2: read dev and recovery switchDaisuke Nojiri
2015-01-27vboot2: implement select_firmware for pre-romstage verificationDaisuke Nojiri
2015-01-04nyan: Ignore the recovery GPIO.Todd Broch
2015-01-03blaze: change ramcode 1000/1001/1010 to use 792MHz bctNeil Chen
2014-12-31nyan*: Set GEN2 I2C pads to open-drain modeKen Chang
2014-12-30nyan_blaze: Enable USB port2Neil Chen
2014-12-30nyan*: Log boot reason in eventlogDavid Hendricks
2014-12-26blaze: change ramcode 0001/0010 to use 792MHz bctJerry Wang
2014-12-26nyan*: Detect watchdog resets and reset the whole machine.Gabe Black
2014-12-26blaze: change ramcode 0000 to use 792MHz bctKen Chang
2014-12-26nyan*: I2C: Implement bus clear when 'ARB_LOST' error occursTom Warren
2014-12-19nyan*: Clear VDDIO_SDMMC3 to reset SD card reader.Hung-Te Lin
2014-12-19nyan*: Disable SD card reader power gpio.Hung-Te Lin
2014-12-19nyan*: Add fast link training functionsJimmy Zhang
2014-12-17nyan*: cbmem: Move the call to cbmemc_reinit.Gabe Black
2014-12-17tegra124: modify panel init sequenceKen Chang
2014-12-17nyan*: enable CLAMP_INPUTSKen Chang
2014-12-17nyan*: Add eventlog supportDavid Hendricks
2014-12-16blaze: Change samsung RAMCODE to samsung-2GB-204/samsung-4GB-204Neil Chen
2014-12-16i2c: Replace the i2c API.Gabe Black
2014-12-15tegra124: Setup clock PLLD by approximating display panel pixel clock.Hung-Te Lin
2014-12-15nyan*: pinmux: fix PWM1/2 conflictsTom Warren
2014-12-15tegra124: set safe values for href_to_sync and vref_to_syncJimmy Zhang
2014-12-15nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.Gabe Black
2014-12-15nyans: prepare for vboot verification of ramstageAaron Durbin
2014-12-15blaze: Change RAMCODE 0010 to hynix-2GB-792MHzNeil Chen
2014-12-15blaze: set 8 default BCT as hynix-2GB-204MHzNeil Chen
2014-12-15nyan*: Reduce the EC SPI bus frequency to 3 MHz.Gabe Black
2014-12-09spi: Factor EC protocol details out of the SPI drivers.Gabe Black
2014-11-14Big, Blaze: Set I2S1 Source to CLK_M to Fix BeepDaisuke Nojiri
2014-11-14nyan: tpm: Increase the TPM frequency to 400 KHz.Gabe Black
2014-11-14nyan: Move some pinmux and clock/reset configuration to ROM stage.Gabe Black
2014-11-14t124: Clean up display init functionsJimmy Zhang
2014-11-14blaze: Create a nyan_blaze mainboard, copied from nyan_bigTom Warren