aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/nyan_big
AgeCommit message (Collapse)Author
2015-01-27CBMEM: Move cbmemc_reinit()Kyösti Mälkki
This replaces need for separate cbmemc_reinit() calls made via CAR_MIGRATE() and in ramstage. Change-Id: If7b4d855c75df58b173f26ef3c90a4a7563166d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7859 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-01-04nyan_big: Update Hynix BCTs and add Kingston 2GB BCT.Tom Warren
Hynix 2GB/4GB configs have been fine-tuned. Kingston 2GB config is new, uses RAMCODE 0x6. BUG=none TEST=emerge-nyan_big coreboot-nyan_big OK. Flashed to my Big 2GB system (PVT1/SKU1) and it booted OK. BRANCH=nyan_big Original-Change-Id: I8a23a5568ef84d5befc13623f78bce664130f314 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/203305 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit e47d18d8cff50f46d0a14715b6750f7aa6d0da82) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I363db37d6a63d9f5c578e68a0149259657e1ebfd Reviewed-on: http://review.coreboot.org/8045 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04nyan: Ignore the recovery GPIO.Todd Broch
CrOS devices with Chromeos EC need only use hostevent to communicate recovery assertion to the BIOS. This CL removes wired GPIO from determining recovery as it appears under certain conditions (cold reset) the internal PU on the AP isn't strong enough and therefore the value is sometimes seen as asserted. BRANCH=none BUG=chrome-os-partner:29333 TEST=compiles & BIOS no longer responds to rec_mode GPIO during boot. Original-Change-Id: Ib220cfa5f5bfe7193d555bfd32c0444b063d00f2 Original-Signed-off-by: Todd Broch <tbroch@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202996 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit d9927bcd67b0fb069fde231314e654d727092282) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6e086cbabc884f18deb2791a0f897e332b31032f Reviewed-on: http://review.coreboot.org/8042 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-31nyan*: Set GEN2 I2C pads to open-drain modeKen Chang
The VDDIO to GEN2 I2C SCL/SDA pins is 1.8V and the external pull-up voltage is 3.3V (the external 3.3V > I/O 1.8V) thus the pinmux E_OD bit of these two pins needs to be set to ensure GEN2 I2C pads work fine on 3.3V. BRANCH=nyan BUG=none TEST=observed voltage drop from 3.3V to 2.36V on gen2 i2c on blaze w/o this change. the waveform looks good on both scl/sda pins w/ this change. Original-Change-Id: I1b97f0c9c7580d1e532c3bdf7ac8690241ee7ee3 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/200996 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 2db39166ec525e56a19746f38a867305a2687365) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0c84eade89311baf0a6f180cb5cc9e2145f6b7ea Reviewed-on: http://review.coreboot.org/7952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30nyan*: Log boot reason in eventlogDavid Hendricks
BUG=none BRANCH=nyan TEST=built and booted on Big under various modes, verified that expected boot mode showed up using "mosys eventlog list" Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I8d98487a2cb910874c8d741008ae59a6c89102e7 Original-Reviewed-on: https://chromium-review.googlesource.com/199691 Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 9f4b2574c1af23dcdc01706e9a118441f46a0f97) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibbf264a1e05323dfddb7cdb270ee6f2d49e83eff Reviewed-on: http://review.coreboot.org/7946 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-26nyan*: Detect watchdog resets and reset the whole machine.Gabe Black
When a watchdog reset happens, the SOC will reset but other parts of the system might not. That puts the machine in a funny state and may prevent it from booting properly. BUG=chrome-os-partner:28559 TEST=Built for nyan, nyan_big and nyan_blaze. Booted normally, through EC reset, software reset ("reboot" command from the terminal), and through watch dog reset. Verified that the new code only triggered during the watchdog reset and that the system rebooted and was able to boot without going into recovery mode unnecessarily. BRANCH=nyan Change-Id: Id92411c928344547fcd97e45063e4aff52d2e9e8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/198582 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit b298be41c0959c58aeb8be5bf15141549da2504c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7900 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-26nyan*: I2C: Implement bus clear when 'ARB_LOST' error occursTom Warren
This is a fix for the 'Lost arb' we're seeing on Nyan* during reboot stress testing. It occurs when we are slamming the default PMIC registers with pmic_write_reg(). Currently, I've only captured this a few times, and the bus clear seemed to work, as the PMIC writes continued (where they'd hang the system before bus clear) for a couple of regs, then it hangs hard, no messages, no 2nd lost arb, etc. So I've added code to the PMIC write function that will reset the SoC if any I2C error occurs. That seems to recover OK, i.e. on the next reboot the PMIC writes all go thru, boot is OK, kernel loads, etc. BUG=chrome-os-partner:28323 BRANCH=nyan TEST=Tested on nyan. Built for nyan and nyan_big. Original-Change-Id: I1ac5e3023ae22c015105b7f0fb7849663b4aa982 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197732 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> (cherry picked from commit f445127e2d9e223a5ef9117008a7ac7631a7980c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I584d55b99d65f1e278961db6bdde1845cb01f3bc Reviewed-on: http://review.coreboot.org/7897 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-19nyan*: Clear VDDIO_SDMMC3 to reset SD card reader.Hung-Te Lin
When across warm reset, if VDD_3V3_SD_CARD gets power-cycled but VDDIO_SDMMC3 does not, we will get ~1.5V leakage on VDD. To fix that, we reset VDDIO_SDMMC3 to 0 along with VDD_3V3_SD_CARD in Coreboot. Payloads must turn on VDDIO_SDMMC3 explicitly before accessing SD card. Note the warnings of "VDD_SDMMC must set early" in comment seems only happens on U-Boot and can be removed. BUG=chrome-os-partner:27053 BRNACH=nyan TEST=Ctrl-U to boot from SD card, login and type "reboot", then Ctrl-U to boot again. Without this patch, system will fail in loading kernel. Original-Change-Id: I7f85995317d18587d514ea3afcff3bfea0a33e93 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196961 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit 2cfdb78d9dc229a3c06f19bbe137d59d923908a4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie7d814e0424478c35a56fbc959437ee6a555684a Reviewed-on: http://review.coreboot.org/7866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19nyan*: Disable SD card reader power gpio.Hung-Te Lin
When warm booting, SD card reader on Tegra 124 needs to be reset by setting power GPIO to zero. Since we don't really access SD card in Coreboot, set it to zero and let payloads enable power when they need to access SD cards. CQ-DEPEND=CL:196783 BRANCH=nyan BUG=chrome-os-partner:27053 TEST=emerge-nyan coreboot depthcharge chromeos-bootimage # With related changes in depthcharge, boots SD card successfully. Original-Change-Id: I2d368eb9480c978e9e343648b58a729028c94622 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196774 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Tested-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit 62bb7d04dff1a87474a8557f144b24e6b7d006ae) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3429535d0d032f9db89d8e70a525a6281102537a Reviewed-on: http://review.coreboot.org/7865 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19nyan*: Add fast link training functionsJimmy Zhang
Some panels (including those on Big DVT) cannot work fine without link training before sending the video signals, especially multi-lane Full HD panels. We need to use the fast link training functions from kernel to support them. BRANCH=Nyan BUG=chrome-os-partner:28128, chrome-os-partner:28129 TEST=tested on nyan, nyan_big dvt. Vince verified on Full HD panels. Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: Ifde8daf0ebdc6fb407610d3563f3311b2a72dbc4 Original-Reviewed-on: https://chromium-review.googlesource.com/196162 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 992132ff3431fc7abba10cc8e910e36d4f3a3f7a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5ed091ae7a872fd674ab21f9f80267052fcd24b1 Reviewed-on: http://review.coreboot.org/7864 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17nyan*: cbmem: Move the call to cbmemc_reinit.Gabe Black
The call was after the call to vboot_verify_firmware and so would only be called when falling back to RO, aka recovery mode. This change moves it to before vboot_verify_firmware so we'll always have the cbmem console. BUG=None TEST=Built and booted on nyan and verified that the cbmem console was the same as the serial output. Built for big and blaze. BRANCH=nyan Original-Change-Id: I02d01110659689b08d32777dae384ac3e01b3b9f Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/196158 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit d3e4a778e4a0f5ade7d633d8ce7e72ef06c44086) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id14a19a78bcb21cb0c4030c2e41195e491f690d5 Reviewed-on: http://review.coreboot.org/7777 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17tegra124: modify panel init sequenceKen Chang
Panel datasheet defines some delay between PWM signal out and backlight enable. This change fixes the current sequence and makes the delays adjustable by dt setting. BRANCH=none BUG=chrome-os-partner:28008 TEST=Verified on Big DVT and Nyan/Norrin panels. Panel works fine with dev mode, and the measurement of power on sequence meets panel requirements. Original-Change-Id: If6015bbb6015a3b203d425f5e90f676ad786b5e8 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/196183 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 2bbcaa7281222ffc0b4026e8b1eb4c210a8e308a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id6424f66eb8dc6adeb70eaa33df742f4e57983c3 Reviewed-on: http://review.coreboot.org/7776 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-17nyan*: enable CLAMP_INPUTSKen Chang
Enable pinmux clamp function to avoid pinmux conflict. For pins which are configured to tristate enabled, the inputs to the controller will be clamped to zero. This can be used to avoid pinmux conflicts since the tristate bit is set to 1 in the power-on-reset pinmux setting. With pinmux clamp enabled, we need to configure all the input pins to tristate disabled. BUG=chrome-os-partner:27091 BRANCH=None TEST=built and booted successfully, display worked fine. Original-Change-Id: Id79a717f2025c812908c7152d439351208aee8d2 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194060 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit c95d6fe79810612cfad721667657cdcb87068d23) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1b23df8b90f83ea2b2c08c4364d90fe71533a5a0 Reviewed-on: http://review.coreboot.org/7775 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-17nyan*: Add eventlog supportDavid Hendricks
This enables event logging support for Nyan platforms. Right now this doesn't do a whole lot. We can add events in later CLs. BUG=none BRANCH=none TEST=built and booted for Nyan Rev. 1, eventlog gets initialized if necessary and can be printed by "mosys eventlog list" Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id77a78f55c8bff9ef0ffc7109c8b03c270e8b6b1 Original-Reviewed-on: https://chromium-review.googlesource.com/191200 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 1bb1a00863a63e53379b02f2b466d4d8ae3cef50) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3a5d896d97dfc66ec37114bd3bac3f34e1c22bf7 Reviewed-on: http://review.coreboot.org/7774 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-16i2c: Replace the i2c API.Gabe Black
The new API is in use in depthcharge and is based around the "i2c_transfer" function instead of i2c_read and i2c_write. The new function takes an array of i2c_seg structures which represent each portion of the transfer after a start bit and before the stop bit. If there's more than one segment, they're seperated by repeated starts. Some wrapper functions have also been added which make certain common operations easy. These include reading or writing a byte from a register or reading or writing a blob of raw data. The i2c device drivers generally use these wrappers but can call the i2c_transfer function directly if the need something different. The tegra i2c driver was very similar to the one in depthcharge and was simple to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and replace the ones in coreboot. The Exynos 5420 driver was ported from the high speed portion of the one in coreboot and was straightforward to port back. The low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot and were replaced with the depthcharge implementation. BUG=None TEST=Built and booted on nyan with and without EFS. Built and booted on, pit and daisy. BRANCH=None Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193561 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe) This cherry-pick required additional changes to the following: src/cpu/allwinner/a10/twi.c src/drivers/xpowers/axp209/axp209.c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7 Reviewed-on: http://review.coreboot.org/7751 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-15tegra124: Setup clock PLLD by approximating display panel pixel clock.Hung-Te Lin
PLLD, the clock for display, was previously hard-coded to 306MHz. To support more different panels, we should calcualte PLLD by panel pixel clock configuration. Note existing pixel clock configurations for nyan* boards won't work (they used to rely on hard-coded approximated values) so the device trees are also modified. BRANCH=none BUG=chrome-os-partner:25933 TEST=emerge-nyan_big coreboot chromeos-bootimage See panel correctly initialized and got DEV screen. Original-Change-Id: I8d592f0cc044e7c4e4803c45955642e791210ad3 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193565 (cherry picked from commit 4f9b793633ebb2d104b0544e3b72fa0d105951c4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib2cabbad60af010e872505e888eab485ba8c2916 Reviewed-on: http://review.coreboot.org/7762 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: pinmux: fix PWM1/2 conflictsTom Warren
GPIO_PU4/PH1 and _PU5/PH2 were set to use the same PWM1/2 SFIO. Even though no problems were caused by this, correct it here so we get a conflict-free pinmux map. BUG=chrome-os-partner:27091 BRANCH=none TEST=Built and booted on Nyan, ran TegraShell "pinmux check" and saw no conflicts. Original-Change-Id: Ib16341aa0c92b9a078d7f3254d4151e9592f40b0 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194582 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit e06a5a62d381f803dd6574787795a51ce1f1fe74) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I055359dc80c0c878ba5f5faac17884a5506a826c Reviewed-on: http://review.coreboot.org/7759 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15tegra124: set safe values for href_to_sync and vref_to_syncJimmy Zhang
href_to_sync and vref_to_sync are chip specific settings. Currently they are set to 1/2 of hfront_porch and vfront_porch respectively. However, to support EDID (CL192730), per David Ung, the safe values for both are 1 (the same settings as in kernel). BUG=none BRANCH=none TEST=built and booted on nyan. Original-Change-Id: Ifb8898e720a160ba044e2b526de2a4d17bc63672 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193504 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit a7128a533ba6083ddfeeca3ba0828962cc2c8ab6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6954a5b49c798ebdffb20e3ebc9099cd17591b79 Reviewed-on: http://review.coreboot.org/7758 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.Gabe Black
This change takes about 8K of space away from the cbfs cache and repurposes it for the cbmem console buffer. This is a little more than twice the space we currently need for the bootblock and ROM stage to give us some room to grow and for extra debug output if needed. BUG=None TEST=Built and booted on nyan. Checked the cbmem output. BRANCH=None Original-Change-Id: I6543bf5efddcf2377528a273f846b8090cd8be55 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193169 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 32e9ea6f9ecaa9b5441c91acab96514222f3af2c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia9e5cc7a4b561bd89137cdc8b594584b272d9fab Reviewed-on: http://review.coreboot.org/7757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyans: prepare for vboot verification of ramstageAaron Durbin
Set the appropriate config options and make the appropriate calls to perform vboot verification. The flashmap offset as well as the TPM information needs to be properly set. Lastly, call into vboot_verify_firmware() to perform the vboot verification when it is enabled. BUG=chrome-os-partner:27094 BRANCH=None TEST=Built vboot verification on nyan. Original-Change-Id: I6113badd6143008ceb2b80f0ec0832e1addd03d7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/190928 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8c6c48c7823738bf9b029a467b077d2ee20d04e5) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a442b1b0fff55e737df2e96740c05c1726502d5 Reviewed-on: http://review.coreboot.org/7743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: Reduce the EC SPI bus frequency to 3 MHz.Gabe Black
The EC doesn't seem to be able to handle its bus running at 4 MHz or higher. To avoid it not being able to keep up, we reduce the frequency of that bus on all nyan derivatives to 3 MHz. Because PLLP can't be divided that low, we switch the clock source to CLKM. BUG=chrome-os-partner:22849 TEST=Built and booted on nyan. BRANCH=None Original-Change-Id: I8f31b41098d64634427b4686f5333012f643fada Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193349 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit c215c50a5bb982b0e671c951e2fe8df06db85db2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia60513d118aed8881927e9d52f170e27655ea8e7 Reviewed-on: http://review.coreboot.org/7739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-09spi: Factor EC protocol details out of the SPI drivers.Gabe Black
The SPI drivers for tegra and exynos5420 have code in them which waits for a frame header and leaves filler data out. The SPI driver shouldn't have support for frame headers directly. If a device uses them, it should support them itself. That makes the SPI drivers simpler and easier to write. When moving the frame handling logic into the EC support code, EC communication continued to work on tegra but no longer worked on exynos5420. That suggested the SPI driver on the 5420 wasn't working correctly, so I replaced that with the implementation in depthcharge. Unfortunately that implementation doesn't support waiting for a frame header for the EC, so these changes are combined into one. BUG=None TEST=Built and booted on pit. Built and booted on nyan. In both cases, verified that there were no error messages from the SPI drivers or the EC code. BRANCH=None Original-Change-Id: I62a68820c632f154acece94f54276ddcd1442c09 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191192 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 4fcfed280ad70f14a013d5353aa0bee0af540630) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id8824523abc7afcbc214845901628833e135d142 Reviewed-on: http://review.coreboot.org/7706 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-11-14Big, Blaze: Set I2S1 Source to CLK_M to Fix BeepDaisuke Nojiri
This is a companion patch of CL:191692 "Tegra: Fix Beep". TEST=Booted Big. Verified beeps at dev screen. Measured frequency by smartphone. Built Blaze. BUG=chrome-os-partner:26609 BRANCH=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I9ba47d06202e9968a908c4a15cfbeac4bfe2c20c Original-Reviewed-on: https://chromium-review.googlesource.com/192063 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit 87a0f166e493b98d2a4e597f90ede090161fffdb) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id3b819745b0753862e8cfa43e7fa1ed4b27eb462 Reviewed-on: http://review.coreboot.org/7462 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-14nyan: tpm: Increase the TPM frequency to 400 KHz.Gabe Black
The TPM now works correctly with the I2C bus running at 400 KHz. Running it at that frequency saves some boot time. CQ-DEPEND=CL:191634 CQ-DEPEND=CL:191793 BUG=chrome-os-partner:27220 TEST=Built and booted on nyan with and without EFS. BRANCH=None Original-Change-Id: I157308c2745342dc1ada4499433004c7ce1c6435 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191813 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 39a740d488d8f33ee698805bc2a8438263162cc8) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I02978407e20cc9d526545157a3a3304729a91010 Reviewed-on: http://review.coreboot.org/7461 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-11-14nyan: Move some pinmux and clock/reset configuration to ROM stage.Gabe Black
To enable EFS, we need to be able to talk to the TPM and the EC before the RAM stage starts. That means we need to set up the pins for those busses, clock those controllers and take them out of reset. BUG=None TEST=Built for nyan, nyan_big, and nyan_blaze. Booted on nyan. With other changes which implement EFS on nyan, saw EC and TPM communication work when in vboot. BRANCH=None Original-Change-Id: Ic65d69fd42beec5f03084c8cb970927c2f69dfb6 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191390 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit d9c176536b1e2eba47fdca90dd3346052573223e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id3117bd0c36f8b92d85cc0cefde2bed9d8de90d0 Reviewed-on: http://review.coreboot.org/7456 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-14t124: Clean up display init functionsJimmy Zhang
The existing display init functions were translated from a script. The new code will play the same functions but are cleaner and readable and easier to be ported to new panel. BUG=none TEST=build nyan and boot up kernel. Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: Ic9983e57684a03e206efe3731968ec62905f4ee8 Original-Reviewed-on: https://chromium-review.googlesource.com/189518 Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 5998f991ea3069d603443b93c2ebdcdcd04af961) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Squashed to pass abuild nyan: Fix the build for big and blaze. The display code for the tegra124 was cleaned up recently, but only the nyan device tree was updated to match the new code, not big's or blaze's. This change copies nyan's device tree over to those other two boards which will get them building again. The settings may not be correct, but they'll be no less correct than they were before. I also updated the copyright date for nyan. BUG=none TEST=Built for nyan, nyan_big, nyan_blaze. Booted on nyan_big and verified the panel wasn't damaged by the new display code or settings. BRANCH=None Original-Change-Id: I75055a01f9402b3a9de9a787a9d3e737d25bb515 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191364 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit ea235f23df31b4ca8006dcdf3628eed096e062b9) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Icdad74bf2d013c3677e1a3373b8f89fad99f616e Reviewed-on: http://review.coreboot.org/7454 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan*: Switching unused pin to GPIONeil Chen
Switching unused pin to GPIO to avoid SPI1 conflicting. BUG=chrome-os-partner:26701 BRANCH=none TEST=Built and boot on Nyan Original-Change-Id: I7de5b8d015f6d02baadd41b1b272dfc49d17c376 Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/189970 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit edf12f441adb2395fe2718bed98d79eb3b128f6b) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I562b58ba02825b16d374d9f0328f6c75431edc63 Reviewed-on: http://review.coreboot.org/7420 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: big: Only delay when and as long as necessary in the PMIC setup code.Gabe Black
The PMIC setup code was unconditionally waiting for 10ms after each register write. It might be possible for there to be an excess of current from lots of rails switching around at the same time, but we can avoid that with a much shorter delay in a few strategic places. This change also moves the write to LDO3 to just under SD1 because LDO3 should track SD1. The duration and position for the delays and moving LDO3 were provided by Dan Coggin at nvidia. BUG=chrome-os-partner:25467 TEST=Built and booted on nyan rev1. Measured a 230 ms decrease in boot time. BRANCH=None Original-Change-Id: I14805bf1b6242bdd0b286f37ae7d635c03909677 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/189016 Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Daniel Coggin <dcoggin@nvidia.com> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 06c4d346deeb47809cd88655a9fa6712ceef9491) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3ce0bdeb4ee60499f6c192fe0803a4cab3d7a8af Reviewed-on: http://review.coreboot.org/7419 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: big: Set the i2c controller frequencies appropriately.Gabe Black
These had been set to something fairly random which results in a very slow clock on the bus itself. The new settings take into consideration the speed the devices on the bus can run at. The TPM can't seem to handle speeds above 40KHz, but some documentation suggests that it should be able to handle up to at least 100KHz. BUG=chrome-os-partner:25467 TEST=Built and booted on nyan rev1. Built for big. BRANCH=None Original-Change-Id: Iee98957c7e492c7dd08b071aeef3cce75c4a9e56 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/189015 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit afca97a29aeb99d3899b713d0e57a3b3214f0d96) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iab0c50b2119ac322252564354c90b5cb2d255c97 Reviewed-on: http://review.coreboot.org/7418 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13Nyan: Set DMA Reserve to 2MBDaisuke Nojiri
When using LPAE, the address space is split to 2MB blocks. This change makes the space reserved for DMA consistent with the block size. TEST=Booted nyan with and without LPAE. Built nyan_big. BUG=None BRANCH=None Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I75c77484f6ca9f23b583ef651956d0265a9b4474 Original-Reviewed-on: https://chromium-review.googlesource.com/188571 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit 16a40a48c2e3fc131a348d5e7d377d26f4b20aaf) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib79c9491dc504d28f811bbf0d91cffd292f5eb86 Reviewed-on: http://review.coreboot.org/7413 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: Select the CD570M Tegra124 model.Gabe Black
This indirectly selects an appropriate PLLX frequency so the main CPUs run as fast as they can but not faster. BUG=chrome-os-partner:25467 TEST=Booted on nyan rev1. BRANCH=None Original-Change-Id: Ibe61f5e35246b272771debf4fdf90c79b21eb5d0 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/188603 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 947ecbce3cb6e4d7ab07d3ffd5b4694ca6270cde) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9163ddea7f246ae7207a8a715ebae2c9627a7e37 Reviewed-on: http://review.coreboot.org/7410 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: nyan_big: Mark the address range covering the SRAM as cachable.Gabe Black
The SRAM is very likely faster than going all the way out to DRAM for data, but I don't think it's part of the cores themselves and won't be as fast as the L1 caches. Enabling caching for this region reduces the time it takes to get to the payload by about 75% when serial output is disabled and the main part of display init is commented out. BUG=chrome-os-partner:25467 TEST=Built and booted on nyan. BRANCH=None Original-Change-Id: I7ff26dea9d50e7d9a76e598e5654488481286b35 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/188459 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit ac8b9b30490d511ca1b207af6845d50e08ac130f) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: If79dcd1b116f30b778788ba4fd45d362ff5d8e6e Reviewed-on: http://review.coreboot.org/7407 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-13nyan: big: Check dram_end when setting up caching in ROM stage.Gabe Black
When setting up caching on nyan and big, we would set the region after DRAM to the end of the address space as uncachable. DRAM may actually extend beyond the end of the address space, so that may result in address aliasing or other problems. This change adds a check to make sure there's actually space there. BUG=None TEST=Built for big. BRANCH=None Original-Change-Id: Ic0a98550222f9dfc0aeafd67a2dd1c0c8f4ece44 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/186769 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 1866a4d2a001beb97779b611b8b69c63175048f4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: If1ca8b5bd4efab8962e03c0d9eaa70c0327ea6b5 Reviewed-on: http://review.coreboot.org/7405 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-11-12tegra124: Program PWM1 to drive panel backlightAndrew Chew
Repurpose config->pwm to mean the particular PWM device (we use PWM1 on nyan), and add code to program the PWM device. BUG=none TEST=emerge-nyan chromeos-coreboot-nyan, regenerate bootimage, and boot. See that the backlight comes up in the bootloader, and brightness can be adjusted via pwm_bl driver in the kernel. Original-Change-Id: I2db047e5ef23c0e8fb66dd05ad6339d60918d493 Original-Signed-off-by: Andrew Chew <achew@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/185772 Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit 0dee98dd0c8510ecd630b5c6cb9ea49724dc8b55) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie53610f3afa30b2d8f484685fb0e8c0b12cd8241 Reviewed-on: http://review.coreboot.org/7402 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-12tegra124: Port a PWM clocking change to big.Gabe Black
The generic tegra124 code will use one of the PWMs to drive the backlight of the display, but the PWM clock was enabled only for nyan. This change enables it for big as well. BUG=none TEST=Built for Big BRANCH=None Original-Change-Id: I5171da7c41f4b4db931563ada3e8e4ebf74ec3d9 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/186767 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 687f3771fb3e6b340a818fa7594b3ac0630fdeaf) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ifd14a22a98e7fe273ec28c460b928b8a83c84b66 Reviewed-on: http://review.coreboot.org/7404 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-12tegra124: nyan: Keep in memory structures below 4GB.Gabe Black
We'd been putting some data structures like the framebuffer and the cbmem at the end of memory, but that may not actually be addressable as identity mapped memory. This change clamps the addresses those structures are placed at so they stay below 4GB. BUG=None TEST=Booted on nyan. Went into recovery mode and verified that there was a recovery screen. Forced memory size to be 4GB and verified that the recovery screen still shows up. BRANCH=None Original-Change-Id: I9e6b28212c113107d4f480b3dd846dd2349b3a91 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/185571 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 63ea1274a838dc739d302d7551f1db42034c5bd0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I970c1285270cb648bc67fa114d44c0841eab1615 Reviewed-on: http://review.coreboot.org/7397 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-12nyan: Use asm volatile instead of plain asm so it doesn't get optimized out.Gabe Black
If an asm blob isn't marked as volatile, gcc is free to throw it out if it doesn't think it produces any values that are actually used. To prevent that from happening, add volatile to some asm blobs in the nyan romstage code. BUG=None TEST=Booted on nyan rev1. BRANCH=None Original-Change-Id: I819e068e738e94ea749fcb72bba2eee080e1dfb1 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/185610 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 76c09581d6ca4dc6c2f9048f599822939f439d11) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0b32197abf0ddc5f454f9c2415a65d98c60ca48b Reviewed-on: http://review.coreboot.org/7396 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-11-10arm: Redesign, clarify and clean up cache related codeJulius Werner
This patch changes several cache-related pieces to be cleaner, faster or more correct. The largest point is removing the old arm_invalidate_caches() function and surrounding bootblock code to initialize SCTLR and replace it with an all-assembly function that takes care of cache and SCTLR initialization to bring the system to a known state. It runs without stack and before coreboot makes any write accesses to be as compatible as possible with whatever state the system was left in by preceeding code. This also finally fixes the dreaded icache bug that wasted hundreds of milliseconds during boot. Old-Change-Id: I7bb4995af8184f6383f8e3b1b870b0662bde8bd4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/183890 (cherry picked from commit 07a35925dc957919bf88dfc90515971a36e81b97) nyan_big: apply cache-related changes from nyan This applies the same changes from 07a3592 that were applied to nyan. Old-Change-Id: Idcbe85436d7a2f65fcd751954012eb5f4bec0b6c Reviewed-on: https://chromium-review.googlesource.com/184551 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 4af27f02614da41c611aee2c6d175b1b948428ea) Squashed the followup patch for nyan_big into the original patch. Change-Id: Id14aef7846355ea2da496e55da227b635aca409e Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> (cherry picked from commit 4cbf25f8eca3a12bbfec5b015953c0fc2b69c877) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/6993 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-22tegra/nyan*: sdram updatesTom Warren
nyan_big: Add 204MHz BCT for bringup, use 1.2V for VDD_CPU Reviewed-on: https://chromium-review.googlesource.com/183939 (cherry picked from commit a6df76afb5342b805baca749abb8265e15748dc1) nyan_big: Add initial 792MHz BCT Reviewed-on: https://chromium-review.googlesource.com/183975 (cherry picked from commit 61d0122fdce6dc9479666bb0a5bc079c6389f78a) nyan_big: use RAM_CODE[3:2] for ram code Reviewed-on: https://chromium-review.googlesource.com/184076 (cherry picked from commit 35e5c5e473f871cdc897473a31586afbececd716) tegra124: support tri-state Board Id Reviewed-on: https://chromium-review.googlesource.com/183855 (cherry picked from commit 1a9d1bd73aa2cd0c36203b247976ad0d00a360e4) nyan*: Fix SPI pinmux configuration Reviewed-on: https://chromium-review.googlesource.com/184281 (cherry picked from commit ac4106b673c285af66d72392bd4a8522aba98489) nyan_big: Add 4GB 204/792MHz BCTs Reviewed-on: https://chromium-review.googlesource.com/184159 (cherry picked from commit 5ff002d09f8db0543b58962f6c0d24627fb0937e) tegra124: Add function for obtaining DRAM size via MC regs Reviewed-on: https://chromium-review.googlesource.com/184535 (cherry picked from commit d4580c46de649903a266a99eb11c9126ba385b48) tegra124/nyan*: Obtain DRAM size dynamically Reviewed-on: https://chromium-review.googlesource.com/184431 (cherry picked from commit a7db71744771decc04cf1966efba70bf4897cfa3) tegra124: Rearrange iRAM layout to allow more space for romstage Reviewed-on: https://chromium-review.googlesource.com/184240 (cherry picked from commit 6bdaabbc068146a4516c724b71d31bb777dabcfc) tegra124: Fix MemoryType field name in SDRAM parameters. Reviewed-on: https://chromium-review.googlesource.com/185113 (cherry picked from commit 9caccd1e86a8c683402fab87d9f3a49b87496e97) nyan_big: Initialize SDRAM without BootROM. Reviewed-on: https://chromium-review.googlesource.com/183624 (cherry picked from commit a1cbc00aa80ec1ea52e833a8e31c8e4b27160e70) tegra124: move FB_SIZE_MB to a more appropriate location Reviewed-on: https://chromium-review.googlesource.com/184930 (cherry picked from commit ddea486fd4410394417c4e59039d46a324918bdc) nyan: Initialize SDRAM without BootROM. Reviewed-on: https://chromium-review.googlesource.com/185114 (cherry picked from commit 1ff51b580b28553919f91b11b443251b048cf26b) tegra124: Save SDRAM parameters to PMC registers for LP0 Reviewed-on: https://chromium-review.googlesource.com/182928 (cherry picked from commit 7476b4bd0ecdc312476cce871d22f57915a0bd86) tegra124: Rewrite SDRAM parameter saving code to be more efficient Reviewed-on: https://chromium-review.googlesource.com/184388 (cherry picked from commit 25084bd0407624e4b2ff82388c32af1198c501a6) nyan: Slightly change the way SDRAM parameter files are set up Reviewed-on: https://chromium-review.googlesource.com/185286 (cherry picked from commit a31887b804f23e031c395113db582cd71f3d1b6d) Squashed 16 commits for SDRAM support on nyan and nyan_big. Change-Id: I07419985376277083d62400dd14fe8273f6d5ca8 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6949 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-10-17Add board_info for all Google/Intel boards mitting the fileStefan Reinauer
Change-Id: Iac53462ab3621d96ba15e2fde2800212584246db Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7072 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-09-24big: Create a nyan_big mainboard which is a copy of nyan.Gabe Black
The nyan_big mainboard is very similar to nyan, but will be different in a few ways. For instance, the BCT will be different, and the GPIOs may need to be configured slightly differently. This change also adds prefixes to the kconfig variables in "choice" blocks for both boards since having multiple instances of choice blocks with the same options confuses kconfig even if all of the instances have mutually exclusive dependencies. Change-Id: I290a32e47fc118bd4b86d543df617ad324325dbc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/183532 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit d1a453fe1aa68b3d12936dd48cc6c94b54f81579) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6927 Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-08 17:05:57 +0000