| Age | Commit message (Collapse) | Author |
|---|
|
Change 1760cd3e (soc/intel/skylake: Use common/block/gpio) updated all
skylake boards to use common gpio driver. Common gpio code
defines PAD_CFG_GPI without GPIO_DRIVER ownership. However, for
skylake PAD_CFG_GPI set GPIO_DRIVER ownership by default. This
resulted in Linux kernel failing to configure all GPIO IRQs since the
ownership was not set correctly. (Observed error in dmesg: "genirq:
Setting trigger mode 3 for irq 201
failed (intel_gpio_irq_type+0x0/0x110)")
This change fixes the above issue by replacing all uses of PAD_CFG_GPI
in skylake mainboards to PAD_CFG_GPI_GPIO_DRIVER.
BUG=b:67507004
TEST=Verified on soraka that the genirq error is no longer observed in
dmesg. Also, cat /proc/interrupts has the interrupts configured
correctly.
Change-Id: I7dab302f372e56864432100a56462b92d43060ee
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
mainboard_ec_init implemented by all x86-based mainboards using
chromeec performed similar tasks for initializing and recording ec
events. Instead of duplicating this code across multiple boards,
provide a library function google_chromeec_events_init that can be
called by mainboard with appropriate inputs to perform the required
actions.
This change also adds a new structure google_chromeec_event_info to
allow mainboards to provide information required by the library
function to handle different event masks.
Also, google_chromeec_log_device_events and google_chromeec_log_events
no longer need to be exported.
Change-Id: I1cbc24e3e1a31aed35d8527f90ed16ed15ccaa86
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Instead of duplicating code across multiple mainboards, use newly
added helper function to read boardid from Chrome EC.
Change-Id: I1671c0a0b87d0c4c45da5340e8f17a4a798317ca
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There have been discussions about removing this since it does not seem
to be used much and only creates troubles for boards without defaults,
not to mention that it was configurable on many boards that do not
even feature uart.
It is still possible to configure the baudrate through the Kconfig
option.
Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch to provide new config options to perform LPC and SPI
lock down either by FSP or coreboot.
Remove EISS bit programming as well.
TEST=Build and boot Eve and Poppy.
Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The Chrome EC event for "thermal overload" was never implemented and
is being repurposed as the EC event mask is out of free bits.
Remove this from the boards that were enabling it.
BUG=b:36024430
TEST=build coreboot for affected boards
Change-Id: I6038389ad73cef8a57aec5041bbb9dea98ed2b6e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove MONOTONIC_TIMER_MSR selection from mainboard
Konfigs, as it only does a reduntant selection of
HAVE_MONOTONIC_TIMER config, already selected under
skylake soc Kconfig.
Change-Id: Ib3177ceb9e8b6c16ce0e437a4a02b94f215af58f
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/20002
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
TPM ACPI entries are automatically generated, and the old static
TPM ASL file is obsolete. Remove the reference to this obsolete
static and empty ASL file.
Delete src/drivers/pc80/tpm/acpi/tpm.asl.
Change-Id: I6163e6d59c53117ecbbbb0a6838101abb468de36
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19291
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled
in both DC and AC states. However since using Deep S3 disables some
expected features like wake-on-USB it is not always desired to enable the
same state in both modes.
To address this split the setting and add a separate config for Deep Sx in
AC and DC states.
All motherboards that set this config were updated, but there is no actual
change in behavior in this commit.
BUG=b:36723679
BRANCH=none
TEST=This commit has no runtime visible changes, I verified on Eve that the
Deep SX config registers are unchanged, and it compiles for all affected boards.
Change-Id: I590f145847785b5a7687f235304e988888fcea8a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19239
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch attempts to finish the separation between CONFIG_VBOOT and
CONFIG_CHROMEOS by moving the remaining options and code (including
image generation code for things like FWID and GBB flags, which are
intrinsic to vboot itself) from src/vendorcode/google/chromeos to
src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig
options, and clean up menuconfig visibility for them (i.e. some options
were visible even though they were tied to the hardware while others
were invisible even though it might make sense to change them).
CQ-DEPEND=CL:459088
Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18984
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The virtualized developer switch was invented five years ago and has
been used on every vboot system ever since. We shouldn't need to specify
it again and again for every new board. This patch flips the Kconfig
logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with
CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to
set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the
latter for Lumpy which seems to have been omitted incorrectly, and hide
it from menuconfig since it's a hardware parameter that shouldn't be
configurable.)
Since almost all our developer switches are virtual, it doesn't make
sense for every board to pass a non-existent or non-functional developer
mode switch in the coreboot tables, so let's get rid of that. It's also
dangerously confusing for many boards to define a get_developer_mode()
function that reads an actual pin (often from a debug header) which will
not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set.
Therefore, this patch removes all those non-functional instances of that
function. In the future, either the board has a physical dev switch and
must define it, or it doesn't and must not.
In a similar sense (and since I'm touching so many board configs
anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC.
Instead, it should just be assumed by default whenever a Chrome EC is
present in the system. This way, it can also still be overridden by
menuconfig.
CQ-DEPEND=CL:459701
Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18980
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of defining a separate LID device for mainboards using
chromeec, define EC_ENABLE_LID_SWITCH for these boards.
Change-Id: Iac58847c2055fa27c19d02b2dbda6813d6dec3ec
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18964
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is done to avoid any conflicts with same IRQ enums defined by other
drivers.
BUG=None
BRANCH=None
TEST=Compiles successfully
Change-Id: I539831d853286ca45f6c36c3812a6fa9602df24c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18444
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change config option selection from "config xyz default y" to "select
xyz" if the config option has no dependencies.
BUG=None
BRANCH=None
TEST=Verified that config option selection remains unchanged.
Change-Id: I259ae40623b7f4d5589e2caa0988419ba4fefda4
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/18400
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
These headers & comments indicating a lack of functionality don't help
anything. We discourage copyrights and licenses on empty files, so
just clear these.
Change-Id: Id2ab060a2726cac6ab047d49a6e6b153f52ffe6d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17657
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Program USB Overcurrent pins as per board schematics definition.
BUG=none
BRANCH=none
TEST=Build and boot kunimitsu from USB device.
Change-Id: I6aeb65953c753e09ad639469de7d866a54f42f11
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/17570
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT.
Platforms that remain to have explicit MMCONF_SUPPORT are
ones that should be converted.
Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17527
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of defining the same functions for reading/clearing boot-mode
switches from EC in every mainboard, add a common infrastructure to
enable common functions for handling boot-mode switches if
GOOGLE_CHROMEEC is being used.
Only boards that were not moved to this new infrastructure are those
that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific
mechanism for reading boot-mode switches.
BUG=None
BRANCH=None
TEST=abuild compiles all boards successfully with and without ChromeOS
option.
Change-Id: I267aadea9e616464563df04b51a668b877f0d578
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17449
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
In preparation of merging the lpss i2c config structures on
apollolake and skylake move the i2c voltage variable to its
own field. It makes refactoring things easier, and then there's
no reason for a separate SoC specific i2c config structure.
BUG=chrome-os-partner:58889
Change-Id: Ibcc3cba9bac3b5779351b673bc0cc7671d127f24
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17347
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
After tuning the temperature values for optimal performance,
this patch updates few DPTF settings for lars boards.
BUG=chrome-os-partner:51025
BRANCH=firmware-glados-7820.B
TEST=Built and booted on lars DVT boards. Verified these
updated DPTF settings with different workloads.
Change-Id: I4c040526c31c3263ed3a9b4cccff3b7a021cfcdb
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/338877
Reviewed-on: https://review.coreboot.org/17068
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch updates the _ART table with other external sensor
TSR0 for Fan speed control on Skylake-U based Kunimitsu and
Lars boards.
Also, updates the temperature values in DPTF policy for
better performance.
BUG=chrome-os-partner:51025
BRANCH=firmware-glados-7820.B
TEST=Built and booted on kunimitsu and lars EVT boards.
Verified this updated _ART table on these boards with
different workloads.
Change-Id: Ib195910c5eb00e004e8b9bd50e266ade3c175be2
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/332349
Reviewed-on: https://review.coreboot.org/17066
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove the FADT from the individual mainboards and select and
use COMMON_FADT in the SOC instead. Set the ACPI revision to 5.
Change-Id: Ieb87c467c71bc125f80c7d941486c2fbc9cd4020
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17138
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of hard-coding the polarity of the GPIO to active high/low,
accept it as a parameter in devicetree. This polarity can then be used
while calling into acpi_dp_add_gpio to determine the active low status
correctly.
BUG=chrome-os-partner:55988
BRANCH=None
TEST=Verified that correct polarity is set for reset-gpio on reef.
Change-Id: I4aba4bb8bd61799962deaaa11307c0c5be112919
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/16877
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a header file to provide common declarations that the
mainboards can use regarding EC init.
BUG=chrome-os-partner:56677
Change-Id: Iaa0b37eff4de644e969a18364713b90b7f27fa1c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16734
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins)
|
|
On x86 platforms, google_chromeec_early_init() is used to put the EC
into RO mode when there's a recovery request. This is to avoid training
memory multiple times when the recovery request is through an EC host
event while the EC is running RW code. Under that condition the EC will
be reset (along with the rest of the system) when the kernel verification
happens. This leads to an execessively long recovery path because of the
double reboot performing full memory training each time.
By putting this logic into the verstage program this reduces the
bootblock size on the skylake boards. Additionally, this provides the
the correct logic for all future boards since it's not tied to FSP
nor the mainboard itself. Lastly, this double memory training protection
works only for platforms which verify starting from bootblock. The
platforms which don't start verifying until after romstage need to
have their own calls (such as haswell and baytrail).
Change-Id: Ia8385dfc136b09fb20bd3519f3cc621e540b11a5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16318
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector
code) the reboot counter stored in `reboot_bits` isn't reset on a reboot
with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR
enabled, later stages (e.g. payload, OS) have to clear the counter too,
when they want to switch to normal boot. So change the bits to (h)ex
instead of (r)eserved.
To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also
remove all occurences of the obsolete `last_boot` bit that have sneaked
in again since 24391321 (mainboard: Remove last_boot NVRAM option).
Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/16157
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15987
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Program PIRQ Routing with correct values, as done by FSP, and also in
'soc/intel/skylake/romstage/pch.c' file. If not done, these values get
overridden by "0" during PxRC -> PIRQ programming in ramstage, in
'soc/intel/skylake/lpc.c' file pch_pirq_init()function.
BUG=none
BRANCH=none
TEST=Build and boot kunimitsu
Change-Id: Ibeb9a64824a71c253e45d6a1c6088abd737cf046
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16044
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
In some cases, we don't want the Chrome EC firmwares (both EC and PD)
built directly by the coreboot build system or included in images at
all. This is already supported with EC_EXTERNAL_FIRMWARE but it does
implement a binary (build and include) or (neither build nor include)
policy.
Some cases require the ability to separately control whether the EC
and PD firmwares should be built and included by the coreboot build
system, only included from externally-built images or not included
at all.
This introduces config changes implementing that behaviour, renaming
options to make it clear that they are specific to the Chrome EC.
Change-Id: I44ccee715419360eb7d83863f4f134fcda14a8e4
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/16033
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The Chrome EC codebase no longer supports the google/lars and
intel/kunimitsu boards. Disable the build in those platforms.
Change-Id: Ic4f5a1a34bb19ee31632c1ad8430c30f7154f138
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15869
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Keep this enabled by default as most x86 platforms could have PCI-e
slots equipped with one of these Intel WiFi adapters.
The Kconfig entries under google boards had no function previously,
the variable was never referenced.
Change-Id: I728ce3fd83d51d4e5e32b848a2079c5fcee29349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15931
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Use the ACPI generator for creating the Chrome OS gpio
package. Each mainboard has its own list of Chrome OS
gpios that are fed into a helper to generate the ACPI
external OIPG package. Additionally, the common
chromeos.asl is now conditionally included based on
CONFIG_CHROMEOS.
Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15909
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Define LPC decode ranges for EC communication.
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu to ensure no EC timeout error
Change-Id: Idefdd79e67e89a794195c6821fee16550d1eda53
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15898
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move mainboard post console init functionality (google_chrome_ec_init &
early_gpio programming) from verstage to bootblock.
Add chromeos-ec support in bootblock
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu till POST code 0x34
Change-Id: I1b912985a0234d103dcf025b1a88094e639d197d
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15786
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
All the mainboards share the same config options for CHROMEOS. Instead
of duplicating those in every mainboard, move the CHROMEOS config to SoC
and make it dependent on MAINBOARD_HAS_CHROMEOS.
BUG=chrome-os-partner:55431
Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15822
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Reduce duplicate code by using the Chrome EC SMI helper functions.
BUG=chrome-os-partner:54977
Change-Id: Ie83e93db514aa0e12e71d371d7afab34a70797fd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15689
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The mainboard_smi_sleep() function takes ACPI sleep values
of the form S3=3, S4=4, S5=5, etc. All the chipsets ensure
that whatever hardware PM1 control register values are used
the interface to the mainboard is the same. Move all the
SMI handlers in the mainboard directory to not open code
the literal values 3 and 5 for ACPI_S3 and ACPI_S5.
There were a few notable exceptions where the code was
attempting to use the hardware values and not the common
translated values. The few users of SLEEP_STATE_X were
updated to align with ACPI_SX as those defines are
already equal. The removal of SLEEP_STATE_X defines is
forthcoming in a subsequent patch.
BUG=chrome-os-partner:54977
Change-Id: I76592c9107778cce5995e5af764760453f54dc50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15664
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was tested on a Chell mainboard since I lack a lars device.
Change-Id: Ifba6fc6589ddd54f4c85e8858f17997fbb4b6176
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15316
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Move the existing I2C voltage configuration variable into a new
structure that is equivalent, similar to how USB ports are configured.
This is to make room for additional I2C configuration options like
bus speed and whether to enable the bus in early boot which are coming
in a subsequent commit.
The affected mainboards are updated in this commit so it will build.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id2dea3df93e49000d60ddc66eb35d06cca6dd47e
Reviewed-on: https://review.coreboot.org/15104
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the voltage tolerance GPIO attribute for configuring I2C/I2S buses
that are at 1.8V. This is currently done by passing in a value to FSP
but it is needed earlier than FSP if the I2C bus is used in verstage.
This does not remove the need for the FSP input parameter, that is
still required so FSP doesn't disable what has been set in coreboot.
The mainboards that are affected are updated in this commit.
This was tested by exercising I2C transactions to the 1.8V codec while
in verstage on the google/chell mainboard.
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I93d22c2e3bc0617c87f03c37a8746e22a112cc9c
Reviewed-on: https://review.coreboot.org/15103
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Allow EC to send an interrupt using ACPI SMI when a MKBP event
is available. This will be used by the sensor stack.
Update all ACPI branch except those without sensors with:
for i in $(find . -name ec.h -exec grep -l MAINBOARD_EC_SCI_EVENTS {} \+
| cut -d '/' -f 2 | grep -v -e cyan -e lars); do
echo $i
cd $i
git diff ../lars/ec.h | patch -p 5
cd -
done
BUG=b:27849483
BRANCH=none
TEST=Compile on Samus. Tested in Cyan branch.
Change-Id: I4766d1d56c3b075bb2990b6d6f59b28c91415776
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: d3b9f76a26397ff619f630c5e3d043a7be1a5890
Original-Change-Id: I56c46ee17baee109b9b778982ab35542084cbd69
Original-Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/342364
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14854
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Command List:
Send command for PS4 exit fails
BUG=chrome-os-partner:52355
BRANCH=glados
TEST=Build and boot lars and verify no hang during active idle
CQ-DEPEND=CL:*257305
Change-Id: I9ffae71b1a38433ffc48ee7be7e2a13e69ad5b87
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 96f00e2d153f92339c378ce256eb7ce6824e3368
Original-Change-Id: I320ae154f3f7145811b57258ddb61b3beb584273
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/341330
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14688
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change the existing chromeos.fmd files and the dts-to-fmd script to mark
RW_LEGACY as CBFS, so it's properly "formatted".
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I76de26032ea8da0c7755a76a01e7bea9cfaebe23
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 717a00c459906fa87f61314ea4541c31b50539f4
Original-Change-Id: I4b037b60d10be3da824c6baecabfd244eec2cdac
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336403
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14240
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
A long time ago many Chrome OS boards had pages full of duplicated
boilerplate code for the fill_lb_gpios() function, and we spent a lot of
time bikeshedding a proper solution that passes a table of lb_gpio
structs which can be concisely written with a static struct initializer
in http://crosreview.com/234648. Unfortunately we never really finished
that patch and in the mean time a different solution using the
fill_lb_gpio() helper got standardized onto most boards.
Still, that solution is not quite as clean and concise as the one we had
already designed, and it also wasn't applied consistently to all recent
boards (causing more boards with bad code to get added afterwards). This
patch switches all boards newer than Link to the better solution and
also adds some nicer debug output for the GPIOs while I'm there.
If more boards need to be converted from fill_lb_gpio() to this model
later (e.g. from a branch), it's quite easy to do with:
s/fill_lb_gpio(gpio++,\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\),\n\?\s*\([^,]*\));/\t{\1, \2, \4, \3},/
Based on a patch by Furquan Shaikh <furquan@google.com>.
BUG=None
BRANCH=None
TEST=Booted on Oak. Ran abuild -x.
Change-Id: I449974d1c75c8ed187f5e10935495b2f03725811
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14226
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The lint script didn't catch that these mainboard directories didn't
have board_info files.
Add all missing board_info.txt files
Change-Id: Ib1d61a3c04e91b22480527885faf60c22093d98a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14117
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes
IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get
their logic reset over pltrst and hence configuring PADRSTCFG to
PLTRST to prevent IRQ strom after S3 resume.
BRANCH=glados
BUG=chrome-os-partner:50536
TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed
after S3 resume.
Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68
Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac
Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329453
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331174
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13992
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Include the code to add the WRDD method to the existing
WiFi Device in the mainboard ACPI code.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=boot on chell with 'region'='us' in VPD and see that it is
properly read out by calling WRDD method on the WiFi device.
Compile for the other platforms that are modified.
Change-Id: Ibcff7585744071ba9018d0ba50e274e63365b150
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: b74bb553415f7ce224ddcb0c2c5ae509b8fed516
Original-Change-Id: Ieb24e0e64974ee3686d14a234e148f5d07fc8b12
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329296
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13840
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch provides config options to enable/disable Intel SST
(Speed Shift Technology).
BUG=chrome-os-partner:47517
BRANCH=None
TEST=Booted kunimitsu/lars, verified HWP driver load successfully.
CQ-DEPEND=CL:313107
Change-Id: I9419a754384f96d308a5ac2ad90bbb519edc296e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 5efb7978e9d3ca9a709a4793ad213423a1c3c45d
Original-Change-Id: I328b074b4f56ebe3caa8952ce3df7f834c1cf40f
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/326650
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: https://review.coreboot.org/13843
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This makes the test IDs the default, taken from depthcharge
master (board/*/fmap.dts, hwid property).
Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13634
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
For devices with Chrome EC, state the "board" name(s), so they're built
as part of the image.
A number of EC boards aren't supported in the Chrome EC master branch,
they're brought along but commented out, waiting for a port to master
in the Chrome EC code base.
Change-Id: Ic6ab821de55cf9b4e8b48fe5ebc603adeb8bb28b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13548
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As the audio card needs 1.8V I2C operation. This patch adds
entry into devicetree.cb to set I2C port 4 operate at 1.8V.
TEST=Built & booted lars board. Verified that I2C
port 4 is operating at 1.8V level
Change-Id: Ia77841a26d024785d53251ca4b17afcf77f36a5b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e431e7acd85f6d7bf9d47f54ed41c48b8276071c
Original-Change-Id: Iccc85a5e3bbf2b5362665036e1294a6635e38fbe
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321000
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Enable the option to back up Vboot non-volatile data from CMOS
to flash as these boards have the necessary nvram fmap region
and are using vboot2 which does not backup to the TPM.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell
Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45
Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324123
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13601
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These devicetree patches set the ACPI PM Disabled variable to 1.
This will disable the ACPI PM timer and remove from FADT table.
BRANCH=none
BUG=chrome-os-partner:48646
TEST=Build for skylake board with the PmTimerDisabled policy in
devicetree set to 1.
iotools mmio_read32 0xfe0000fc should return 0x2.
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
should list only "tsc hpet". acpi_pm should be removed from this list.
Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce
Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319362
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13589
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=None
Change-Id: I331f25ad4764cab972af7198f6154f604d2dbeae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c1cb04645cbf34696e6adf48acec9d396e87ca9
Original-Change-Id: I8d14ea16b2d07bbf04c5c33e4205a85d9f21847b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324075
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13585
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some trivial cleanup.
Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Updating EC+PD takes long enough to update that it is good to
show the "critical update" screen when doing an EC/PD update.
BUG=chrome-os-partner:49650
BRANCH=glados
TEST=Build and boot on chell in normal mode with an EC update payload
and ensure that it reboots to enable graphics, shows the "critical
update" screen, and then reboots to disable graphics init again.
Change-Id: I436b96b95595b68273e594bdcfe2db0789ee26b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 08e45decd066f8f57ad103ff8b76cb7a916afa9e
Original-Change-Id: Ie250f4531437e4a0ce14b5aeb0fe564e9461fe4d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13075
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Override the default PL2 values with ones recommended by Intel.
BUG=chrome-os-partner:49292
BRANCH=glados
TEST=MMIO 0x59A0[14-0] to find PL1 value (0x78) / 8 Watts = 15W
MMIO 0x59A0[15] to find PL1 enable/disable = Disable
MMIO 0x59A0[46-32] to find PL2 Value (0xC8) / 8 Watts = 25W
Here PL2 is set to 25W and PL1 is disabled.
CQ-DEPEND=CL:321392
Change-Id: I338b1d4879ae1b5f760e3c1d16e379a2baa1c965
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fa6a115227385bef44abfacf58af306c16ed478a
Original-Change-Id: I3bfc50256c9bdd522c984b11faf2903d7c44c81f
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/322454
Original-Commit-Ready: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Original-Tested-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com>
Original-Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/13071
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These are generated from depthcharge's board/*/fmap.dts using the
dts-to-fmd.sh script.
One special case is google/veyron's chromeos.fmd, which is used for a
larger set of boards - no problem since the converted fmd was the same
for all of them.
Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT
region ends up at the beginning of flash). This becomes necessary
because we're working without a real cbfs master header (exists for
transition only), which carved out the space for the offset.
Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Below are the correct RCOMP Target Values:
Samsung K4E6E304EB part = {100, 40, 40, 21, 40}
The rest of the DIMMs should have RCOMP set to
{100, 40, 40, 23, 40}
LARs EVT has new DIMM configurations, and the earlier RCOMP
settings are not correct for the newly added DIMM cards,
causing reboot issues.
With this patch all the DIMMs get the required values programmed.
BRANCH=None
BUG=None
TEST=Built for Lars EVT SKU1/2/3 and verified Boot to OS.
No Reboot after this change.
Change-Id: I5fa5ce47b4b47198b0ae8d0b57f7729cb57d23bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d29cc8a4ad9bc2b7680e4df146ce281738e4a3c4
Original-Change-Id: I15195b748213553907ff22dbc74651d70f3c7bb6
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320527
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13005
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Kingston eMMC can now run under HS400 mode.
BUG=chrome-os-partner:48017
BRANCH=none
TEST=run consecutive boot 100 times on Lars proto Kingston SKU, and
MMC errors didn't happen.
Change-Id: I3c16db6111273fbbabbfba1c315edc780fe23525
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ac474bd7bd33f11904a27691e9eb61bdaf212c6b
Original-Change-Id: I9e47b6ba64ac94acff7673fca86fa62bfb30edd9
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320194
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/13004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change enables SaGv feature for skylake
platform. As a result of this patch the skylake
platform will train memory at both low & high
frequency points. This will be used to
dynamically scale the work point
(voltage/frequencies).
The value "3" here means enable. Following
is the table for same.
0=Disabled (SaGv disabled)
1=FixedLow (Fixed to low frequency)
2=FixedHigh (Fixed to High frequency)
3=Enabled( SaGv Enabled.Dynamically changes)
BRANCH=None
BUG=chrome-os-partner:48534
TEST=Build and boot lars
Change-Id: I82b1a428d2d3dce47f46de576f677cf2249b6b5d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e252123cc73543d0f1b320af9d8873f99a45ab1
Original-Change-Id: I1a545ff2f38df23964378c0d833e29006b2c5557
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320022
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-on: https://review.coreboot.org/13002
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
MP init is already handled in coreboot, but it is also part of FSP
FSP has a implemented a provision to allow FSP to skip MP init and
let coreboot handle it.
BRANCH=none
BUG=chrome-os-partner:44805
TEST=Build and booted in Lars with SkipMpInit enabled from CB
CQ-DEPEND=CL:319353
Change-Id: Ib35d9072b883592d22466dfeb1fd45403c0479d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 91cf59ea7865568eca2ce242d81c4c486076d5ac
Original-Change-Id: Ibb46fc6bc7e862c9ea8bc9f9b0d508c3707282a2
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319257
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12999
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update Memory IDs for EVT board
BUG=None
BRANCH=lars
TEST=Build and boot lars
Change-Id: I8c0c731fc3a8eec0cb558137e9db90170debf2c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a95fbf063b2e41d551171228a1ea8cbcfdcaecc8
Original-Change-Id: I2be8a7db99f17ea2968d7e4c5de83cc3e4cbcd14
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319622
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12996
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Lars has an ambient light sensor connected to the EC which
is presented to the OS as a standard ACPI0008 device.
BUG=none
BRANCH=none
TEST=emerge-lars coreboot
Change-Id: I406b634176dac3f4cf1894e6b386af3306d11ffa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37d96458a11c33899f210cc04d3bdab07ec18746
Original-Change-Id: I017aeed1a8684676557e483ffa895dc4bb125d26
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319364
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12990
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BRANCH=lars
BUG=None
TEST=alt+f6, alt+f7
Change-Id: I20d44ae806facf7470ab50d7b9ca4f36404b6ea3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3bf8c26a11e632cc9f4112eace813478fb7ff8ca
Original-Change-Id: Iaa59818f5d2d17eb6759cefa9b6fbfba82bb2fca
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319270
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/12989
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Follow kunimitsu setting of
https://chromium-review.googlesource.com/#/c/313068/
BRANCH=none
BUG=chrome-os-partner:48459
TEST=Build and boot in lars
Change-Id: Iffa9e1307f478b1d72befd3e5af71e7d40bb55ef
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6c669014d0773d6790656dd6f957d2c860d00781
Original-Change-Id: I615d53a33ad8e750d4382e2a9ec397c5b6ff55e1
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/317222
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12978
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The write protect GPIO is not being configured early enough.
This is leading to coreboot reading incorrect value, and
writing the incorrect value in vboot shared file.
This is leading to "crossystem wpsw_boot" always returning 0
even with the write protect screw in place during boot.
BRANCH=none
BUG=chrome-os-partner:48292
TEST=Build and boot on lars
Change-Id: I28fbbd690ca6efb539422e9ba02f10e07cd35346
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d229ba9d8934dcb5f22b27ce0ad27601ec87d6ff
Original-Change-Id: I64f2497a6bb3a50b0f58c67e2ab6751c4836fd89
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/317130
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12966
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The HeciEnabled decides the state of Heci1 at end of boot. Setting to 0
(default) disables Heci1 and hides the device from OS. It internally uses
the FSP Psf Unlock policy to disable the Heci1. It also adds the p2sb
device in the devicetree which is necessary for hiding and unhiding the
device.
BRANCH=none
BUG=chrome-os-partner:45618
TEST=build for kunimitsu.
CQ-DEPEND=CL:*238451
Change-Id: Ieba2ab3b4ac518cce8371069028170ba99aaf079
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cbefe9d6e9a981594534d346be67a5cd94483d05
Original-Change-Id: I8c95b5b9b28ba8441ca031f4e9ec523d913990d6
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311913
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12977
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Enable the config option for TPM to use PIRQ instead of SERIRQ
and enable the MAINBOARD_HAS_LPC_TPM option.
BUG=none
BRANCH=none
TEST=tested this patch with TPM ACPI driver(tpm_tis.force=0)
Change-Id: I761d623d1064b8030f2703500d174259bb20ca79
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2f7bdb1091b7dd62a3c0b4a2272ab9f56fd7acc9
Original-Change-Id: Id1a867980d2e28a1f328aa36bed3c846b2137bec
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/317471
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/12974
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
At S0, S0ix and S3 LPC LAD signals are
floated at 400~500mV.
BRANCH=none
BUG=chrome-os-partner:48331
TEST=Build and boot on lars
Change-Id: I5582007e5caaf444740fa71c9761c27614aafee2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b855fd5834056a3f7d4aef91d634066006990a38
Original-Change-Id: I3a54f9f83f055e433cc1fea38169437ee7f9188f
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/317071
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12965
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove the WakeConfigWolEnableOverride to disable WOL override
configuration in the General PM Configuration B (GEN_PMCON_B) register
BRANCH=none
BUG=none
TEST=Build and boot on lars
Change-Id: I48d3b706517b6ea6bda44800f61bb11da64503fb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eab69f2d725df739e5e0e5901a581ad58732cdf9
Original-Change-Id: I42c5a87150638171526ee67f194c1cd9d155203b
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/317080
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12962
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Provide an option for including the NHLT blobs within the
lars mainboard directory while also adding the ACPI NHLT
table generation that the current hardware supports.
BUG=chrome-os-partner:44481
BRANCH=None
TEST=Built and booted lars board.
Audio worked with MAXIM audio card.
Change-Id: I1b7836c685ebbe1498f3dbaa2eb64d5e0d4faabb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 401f1a7b23dca19712517ed1588e1390769d1271
Original-Change-Id: I6a937872a9e10d2c5ea15d5952d23e98416df092
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316092
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12961
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Make sure the latest & greatest Intel targets actually
build in our build system.
intel/sklrvp is still failing for reasons unrelated to the rest
of the skylake boards. Leaving that disabled for now.
Change-Id: Ie784628a57257cea30e5e47074648198b884f6db
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12857
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Follow kunimitsu setting of
https://chromium-review.googlesource.com/#/c/313309/
BRANCH=none
BUG=none
TEST=Build and boot on lars.
Change-Id: I77a4454b3702dc58dc70a7b981b25a656e97f534
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c390322b4c770a0206549257dd34d1ef1242cc3
Original-Change-Id: I612e799433a396a6cce5742adb6de72a305b5df1
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316270
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/12954
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
LARs design don't have SD Connector over native SD Controller.
BUG=chrome-os-partner:48190
BRANCH=None
TEST=Build & boot LARs. Use "lspci" doesn't list 0x1E:06
device in list.
CQ-DEPEND=CL:315420
Change-Id: Idff7243a6aaf4b8d5f49e4bf215a77131f716485
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca769138b97b404598c4a6bfa6c2ff5c1c3ec896
Original-Change-Id: I71416ac89a8c91ab272d6737d1b46c8045567e17
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/315423
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12947
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
DPTF may power off the system when it starts if the CPU temp is >90C.
Since TJmax is 100C set the critical threshold to just below that value.
BRANCH=none
BUG=none
TEST=Build and boot on lars.
Change-Id: I3abf946ae09c3c691480e468d0c1d74730dc6c06
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7c2230009edb840e88a20c2d8a87f942c09b6bf3
Original-Change-Id: Iee1a3596dbbe934f68637f012c02c078c3751eeb
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316102
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/12955
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Disable kepler device, it is removed and was not used on proto anyway.
BUG=none
BRANCH=none
TEST=build and boot on lars proto
Change-Id: I137b82b8dca23f5b40adcc6a056e77a4ff54d4d5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 44d63453a9b31331d13d05f8f86d4218af0f0aa1
Original-Change-Id: Ib0892bf93b1d0cda1c0143d2b16cd58aeda83131
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/315950
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/12950
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Adding support for Maxim 98357A audio amplifier.
Removed SSM4567 support from LARs.
BUG=chrome-os-partner:44481
BRANCH=None
TEST=Build & boot on LARs.
Verify audio playback works using MAXIM amplifiers.
Change-Id: I2cd8b20e936319b434017b6dd73d4739684d21d3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 76cbc20826c884194a144f6b6bc644900e5d475d
Original-Change-Id: I1156096b6aa367c0b8d8e3952d92f0eb5cf2820f
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/314543
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12960
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Currently, the Power Limit 1 (PL1) value is 6W which is
low for high performance KPIs. This patch updates PL1
value as TDP. SKL-U has 15W TDP.
BRANCH=none
BUG=none
TEST=Build and booted on lars.
Change-Id: Ic1313385e0aa1760b473a34c853a95c76257eecf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a47faee53e08da81602b485937621fd49eb2ddbf
Original-Change-Id: I7c91dcdc82525a6d2b706f8f504ba48601097ef7
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316370
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/12953
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:48017
BRANCH=none
TEST=Verify eMMC is working fine.
Change-Id: If02d969029a9eb8d05148ee958fd34225c8a88fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dca385c2bbf11c9eb79fd0761b2b335f8fdff491
Original-Change-Id: I371036426f17530409b46af285b18f4522739ee7
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313912
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/12618
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Because these platforms haven't been getting build testing, they've
missed out on some of the improvements that the other platforms have
gotten.
Enable MAINBOARD_HAS_LPC_TPM so that they will build.
Change-Id: I5e44135b6dfa800fa14e5b08c3e3e5921d50b082
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12865
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Chrome OS verified boot path supported multiple CBFS
instances in the boot media as well as stand-alone assets
sitting in each vboot RW slot. Remove the support for the
stand-alone assets and always use CBFS accesses as the
way to retrieve data.
This is implemented by adding a cbfs_locator object which
is queried for locating the current CBFS. Additionally, it
is also signalled prior to when a program is about to be
loaded by coreboot for the subsequent stage/payload. This
provides the same opportunity as previous for vboot to
hook in and perform its logic.
BUG=chromium:445938
BRANCH=None
TEST=Built and ran on glados.
CQ-DEPEND=CL:307121,CL:31691,CL:31690
Change-Id: I6a3a15feb6edd355d6ec252c36b6f7885b383099
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12689
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update Memory ID for Proto board
Update detection of single/dual channel memory to use SPD Index (Memory ID)
Remove boardid.h as it is no longer needed
BUG=None
BRANCH=None
TEST=Build and Boot Lars (Proto)
Change-Id: I100b0fec4bf555c261e30140109cb0f36576130c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a4fddf4f1a4441fca8783cfa451e220ff986d8
Original-Change-Id: I636e881cb3fb9a0056edea2bc34a861a59b91c8f
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313903
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/12593
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
EC_SOFTWARE_SYNC depends on CHROMEOS, so move it into the CHROMEOS section.
This fixes the kconfig warning:
warning: (CHROMEOS && BOARD_SPECIFIC_OPTIONS ...) selects
EC_SOFTWARE_SYNC which has unmet direct dependencies
(MAINBOARD_HAS_CHROMEOS && CHROMEOS && VBOOT_VERIFY_FIRMWARE)
Change-Id: I459f48fd18c7568c4584df7d4aefa69dec3e4907
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12460
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Kernel needs to set Audio IRQ as wake capable.
BUG=None
BRANCH=None
TEST=emerge-lars coreboot
Change-Id: Ib7f0fc52baa006d992a2f91a63417e3f76817634
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 32d82ac48c6f830fbb09b776d0adaf6b7a727416
Original-Change-Id: I3fd70ac99c623a99b07fa1a185ebace8c1fc3d69
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312172
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12450
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch enables GPP_B5 as ACPI_SCI for wake.
It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW.
BUG=none
BRANCH=none
TEST=emerge-lars coreboot
Change-Id: I2b65f6a37783ecdbdbc32ebe613243e042c865e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ec5b629f920984564f12f2c09458ed300d031f69
Original-Change-Id: I9bd2b3595ae833fa5d07d97a7cda4a29041be837
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311890
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/12449
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The family variable was not being set yet for skylake, add this
to the current boards.
BUG=chromium:551715
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Icf175e4ce89cb47b9eabce1399eb3ef29e7a607f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e379402f38634eb0204e03b616111fff9515cec
Original-Change-Id: Ia31fb04b5c22defc71a0c02d9fa1eff93ccbc49d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311213
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12390
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Copy from the CL https://chromium-review.googlesource.com/#/c/307028/
(I40c540dad32beefe249f025b570c347d3ad08c36)
BRANCH=None
BUG=None
TEST=emerge-lars coreboot
Change-Id: I131fb729661f0f3bfd198cdf238c627bf38a46a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 70d471c507d12924466979c93742944975a03f27
Original-Change-Id: I0128dc65110ba363185db9c2aca5cdb140c344c2
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310394
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12344
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
- CACHE_ROM is no longer used in the coreboot code. It was removed in
commit 4337020b (Remove CACHE_ROM.)
- CAR_MIGRATION is also no longer used in coreboot code - it was removed
in commit cbf5bdfe (CBMEM: Always select CAR_MIGRATION)
- MARK_GRAPHICS_MEM_WRCOMB was removed in
commit 30fe6120 (MTRR: Mark all prefetchable resources as WRCOMB)
Change-Id: I8b33a08c256f6b022e57e9af60d0629d9a3ffac8
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12327
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The last_boot NVRAM option was deprecated and removed in
commit 3bfd7cc6. Remove the last_boot option from all
affected mainboards to eliminate user confusion.
Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12316
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This is based on kunimitsu with minor changes:
- update GPIOs based on schematic
- update SPD data for memory config
- disable ALS
BUG=None
TEST=emerge-lars coreboot
Change-Id: Id1c9edfe3cc665e90683344f1662de2e65caf766
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3201aa573a77fcad3b6b1335d23eb4c2a09c1708
Original-Change-Id: Ifae446e4668569b6100b29bc1f52b0fea1df2952
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308283
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/12201
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I95129e6f519735e236c9c13b16e21df25b9ea607
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12200
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
