summaryrefslogtreecommitdiff
path: root/src/mainboard/google/kukui
AgeCommit message (Collapse)Author
2019-05-07google/kukui: Support sound in boot processJiaxin Yu
Configure and enable GPIO for speaker amp max98357a. BUG=b:117254418 TEST=Build pass and verified on kukui p1 board BRANCH=None Change-Id: I97655702dff402245326d2eff71fae0e336df9f5 Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-06google/kukui: Raise the CPU frequencyTristan Shieh
Run CPU at the highest freqency (1989MHz) to speed up the boot time. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I703ffcb99367f87e6792a72485f5634e0505e5ac Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32466 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-22board/kukui: Support ADC value for NCHung-Te Lin
When the components like LCM ID are not installed (i.e., NC), ADC will return some value with much larger variation from standard value (out of the tolerance we set). To support that, we should check tolerance only on non-NC voltages. Also improve the error messages so we can see the ADC raw values instead of simple assertion error (which makes debugging more difficult since we have to build another firmware image just to print the values). BUG=None TEST=Booted on Kukui and got correct SKU ID for NC LCMID. BRANCH=None Change-Id: I8d00956e0e3b48ddbcaa505dd3ade24720c3b4ad Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32353 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-17google/kukui: Get write protection status from WP GPIOHung-Te Lin
Write protection (get_write_protect_state) was hard-coded to 0 and should be fixed to read from correct GPIO (PERIPHERAL_EN0 from schematics). BUG=b:130681408 TEST=make -j; boots on Kukui Rev2. BRANCH=None Change-Id: I75b98b1d587abe5e8cdf3df28ea661bc1ffa19f9 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-04-15google/kukui: Include LCD module identifier (LCM ID) into SKU IDHung-Te Lin
Kukui is using MIPI display panel and needs some identifier to tell payloads which LCD module is installed, and to select right kernel device tree. Following Scarlet, the decision is to embed LCD module ID as part of SKU ID. The LCM ID is using a different voltage mapping table from the rest. Considering the complexity in computation of SKU ID, it is better to move the cache logic from get_index to caller. Also revise the mapping table since ADC on 8183 only supports 12 levels. BUG=b:129299873 TEST=make -j; boots on Kukui Rev2 unit. Change-Id: Ib0c00bc8ce3c71c445c5c4561403ce8ef4dd5844 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32263 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-11google/kukui: Add variant 'Krane'Hung-Te Lin
Add the new configuration 'Krane' that will need at least its own EC. There's currently no difference in coreboot side. BUG=b:130011505 TEST=make menuconfig; make -j # select board=Krane BRANCH=None Change-Id: Ibb2ec42b08f9a51b22c22f3fe99b203f5eb31627 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-11google/kukui: Use internal CR50_IRQ pull-upYou-Cheng Syu
For Kukui CR50_IRQ pin, we're going to replace external pull-up with internal pull-up. This change won't break older boards, so we can just always do that when setting up GPIOs. BUG=b:124821269 BRANCH=none TEST=Waveform looks correct. Change-Id: Ib1a90dce583a6aa0cec8ac8ba96d1362f50c16a8 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-09google/kukui: Configure AP_IN_SLEEP_L correctlyYou-Cheng Syu
This pin should be set to its alternative function SRCLKENA0 instead of GPIO, so that SPM (a power management component of MT8183) can control it. BUG=b:113367227 BRANCH=none TEST=1. Boot. Run 'powerinfo' in EC console and see power state in S0. 2. Run 'powerd_dbus_suspend --wakeup_timeout=10', and then run 'powerinfo' in EC console and see power state in S3. 3. Wait until AP resume. 4. Run 'powerinfo' in EC console and see power state back to S0. Change-Id: I0a7e34f95381dec17eb6d166d6552c12e021bd9a Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32120 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
For Chrome OS (or vboot), The PRESERVE flags should be applied on following sections: RO_PRESERVE, RO_VPD, RW_PRESERVE, RW_ELOG, RW_NVRAM, RW_SMMSTORE, RW_VPD, RO_FSG (b:116326638), SI_GBE (chromium:936768), SI_PDR (chromium:936768) With the new PRESERVE flag, we don't need RO_PRESERVE and RW_PRESERVE in the future. But it's still no harm to use it if there are multiple sections all needing to be preserved. BUG=chromium:936768 TEST=Builds google/eve and google/kukui inside Chrome OS source tree. Also boots successfully on eve and kukui devices. Change-Id: I6664ae3d955001ed14374e2788d400ba5fb9b7f8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-02-28google/kukui: Add RTC initializationRan Bi
Initialize RTC at ROM stage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I9d9c68755e8a6ac65dd794211e6ccf06e5057567 Signed-off-by: Ran Bi <ran.bi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-02-27flapjack: use sku_id 0 for un-provisioned boardYH Lin
Instead of using 2, 0 is now used for non-CBI provisioned board or corrupted CBI board to confrom to the sku encoding. BUG=b:123676982 BRANCH=kukui TEST=test with un-provisioned board to verify the sku_id. Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I66f29f8a46cd774b40354def7d3623ec44cb96ce Reviewed-on: https://review.coreboot.org/c/31623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-02-26flapjack: get sku_id from ec (cbi)YH Lin
On flapjack, retrieve the board information via CBI interface. Also reserving 0x2 sku_id for the case of un-provisioned board as this is the id used prior to the readiness of cbi. BUG=b:123676982 BRANCH=kukui TEST=provisioned cbi info and verify the sku_id. Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: Iad7a52df38e2045abbdded8ba0a1f1544de961fc Reviewed-on: https://review.coreboot.org/c/31586 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-05mb/google/kukui: Add default HWID for Chrome OSHung-Te Lin
The default value for Chrome OS HWID should be different. Calculated as HWID v1. BUG=b:123336677 BRANCH=kukui TEST=build and boots properly. Change-Id: I39c640562c1c3b117292b8abacd36a4a9c2fa6c6 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/31088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-31google/kukui: Set GPIO_RESET to output modeTristan Shieh
In payloads, we didn't set GPIO modes. We have to set up GPIO mode in coreboot for payloads. BUG=b:80501386 BRANCH=none TEST=HW reboot works in depthcharge Change-Id: Ibd2c6c071871edc59497fbb245cdbec6a814f621 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31148 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-29google/kukui: Move some initialization from bootblock to verstageYou-Cheng Syu
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. This CL moves some initialization steps from bootblock to verstage. This will save us about 2700 bytes (before compression) / 1024 bytes (after LZ4 compression) in bootblock. In case of CONFIG_VBOOT is disabled, these initialization steps will be done in romstage. BRANCH=none BUG=b:120588396 TEST=manually boot into kernel Change-Id: I9968d88c54283ef334d1ab975086d4adb3363bd6 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/30331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-29google/kukui: Implement HW reset functionTristan Shieh
Asserting GPIO PERIPHERAL_EN8 will send a signal to EC to trigger a HW reset for SoC and H1. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; manually verified the do_board_reset() on Kukui P1 Change-Id: I9afad84af2031a766bc08fc76c8b5f55588c453a Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31118 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-29mediatek: Separate WDT reset function from WDT driverTristan Shieh
Separate WDT reset function from WDT driver, then we can use the common WDT driver and have a board-specific reset function on different boards. In Kukui, we plan to use GPIO HW reset, instead of WDT reset. Add config "MISSING_BOARD_RESET" in Kukui to pass the build for now. BUG=b:80501386 BRANCH=none TEST=emerge-elm coreboot; emerge-kukui coreboot; Change-Id: Ica07fe3a027cd7e9eb6d10202c3ef3ed7bea00c2 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31121 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24mediatek/mt8183: Move some initialization into mt8183_early_initYou-Cheng Syu
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. This CL adds a new function mt8183_early_init, which includes all initializations that should be done in early stages. All mainboards using MT8183 should manually call it in either bootblock or verstage. BRANCH=none BUG=b:120588396 TEST=manually boot into kernel Change-Id: I35d7ab875395da913b967ae1f7b72359be3e744a Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-23google/kukui: Revise FMAP layout for larger CBFSHung-Te Lin
Kukui with vboot enabled will build with `detachable_ui`, which needs larger space in CBFS for more complicated assets. So we need to revise FMAP sections: - BOOTBLOCK (not really used) only needs <= 32K. - GBB can be much smaller since assets moved from GBB to CBFS. - FMAP is re-ordered (with the cost of less efficient in bsearch) so CBFS can get larger continuous space. - COREBOOT(CBFS) should take all space left. Since FMAP and COREBOOT have changed location, the system will need to reflash EC (which contains the new bootblock) as well. BUG=b:123202015 TEST=Builds and boots on Kukui P1 Change-Id: I22cff99dca8c396c5897c3f6631721af40f3ffbd Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/31035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-23mediatek/mt8183: Add Micron 4GB LPDDR4X DDR supportHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: I985c5061ce4ed4d88a17619aa5cde7d0121dd3a3 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-13mb/google/kukui: add flapjack on top of kukuiYH Lin
Add placeholder for future flapjack additions/modifications. BUG=None BRANCH=kukui TEST=build with kukui/flapjack configurations Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: Ib9cd39e284f19b9179da73ed9f2b13d97442960e Reviewed-on: https://review.coreboot.org/c/30859 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10google/kukui: Correct boardid sources and add sku_idHung-Te Lin
Kukui is going to use ADC#4 as SKU ID, and utilizing EC BoardID as global board_id (i.e., board revision). BUG=b:122060615 TEST=make; manually tested on Kukui P1 board. Change-Id: I7bba368c141a7ba6db11f24b8e8e7158f0fc729e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Complete board ID ADC valuesHung-Te Lin
The ID from ADC on Kukui supports 16 different values and we should list all voltage values ahead. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ic3abe07abfe818ca68e180c262fd431d1167b801 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Correct boardid init valuesHung-Te Lin
From `boardid.h`, the uninitialized ID values should be BOARD_ID_INIT instead of BOARD_ID_UNKNOWN. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ie5267e575e38b92ec64a7317defbd00ee153fa0a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-09google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flashTristan Shieh
Reading nvdata from non-volatile flash storage. With this patch, it will pass the firmware test that corrupts FW_MAIN_A and boots up with FW_MAIN_B. BUG=b:80501386 BRANCH=none Test=test_that --board=kukui 172.23.213.147 firmware_CorruptFwSigA Change-Id: I9ef6bff019ee986ff018202bfd4d4a875526ec6c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/30701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-03google/kukui: Initialize DRAM from romstageJunzhi Zhao
Add DRAM support for google kukui. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1ed01404343745c883b22a648966327bdcabc5c2 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/28438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-12-05google/kukui: Support TPMTristan Shieh
Init SPI bus 0 to connect TPM, configure interrupt type of GPIO CR50_IRQ, implement tis_plat_irq_status(), and set up chromeos GPIO table for TPM interrupt. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui. Change-Id: Ieaa6ae65fbfb5ab6323e226e8171dd7a992c3a39 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/29192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-29mediatek/mt8183: Add MT6358 PMIC supportHsin-Hsiung Wang
PMIC provides power features like auxadc, buck/ldo, interrupt-controller..etc BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ic247faf73517f6512f9c9a69ba0254c749d68d4c Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/29422 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-02google/kukui: Add board id supportTristan Shieh
Get board id from AUXIN4 and RAM code from AUXIN3. BUG=b:80501386 BRANCH=none TEST=AUXIN4 is 0.074v and AUXIN3 is 0.212v on P0. AUXIN4 is 0.212v and AUXIN3 is 0.212v on P1. Change-Id: I50533e851d2fae66ae8c5e4e1aa36708d9058e94 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/29062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-25google/kukui: Support recovery modeTristan Shieh
Get recovery mode switch from EC and pass it to payload. BUG=b:80501386 BRANCH=none Test: Boots correctly on Kukui. Change-Id: Ib92afca885e5a97ec4646f55f2279ef56a61af5a Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/29190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-17google/kukui: Configure USBTristan Shieh
Set up USB host controller. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Iec98f3dc1bbf3dda3d28dbefad15339d48608c7e Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-09-21google/kukui: Set up EC_IN_RW GPIO for ChromeOSTristan Shieh
Set up EC_IN_RW GPIO to boot depthcharge. Without this patch, depthcharge will fail to tell if the EC firmware is RW. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and see in logs, that depthcharge detects EC_IN_RW GPIO. Change-Id: Icb39d663f65b72e0ad54059c9590d9693106ee25 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28670 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-16google/kukui: Configure EMMCTristan Shieh
Set up EMMC gpios for payloads. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1e7ee9bfe3a26ed04374e8c74243f48552a1d254 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-09-16google/kukui: Notify EC that AP is in S0Hung-Te Lin
We have a pin from AP to EC, called AP_IN_SLEEP_L (SRCLKENA0 on AP side, pad R23) that is supposed to be high in S0, and low in S3 (and X/don't care in S5). This should be set as early as possible in bootblock. BUG=b:113367227 TEST=make; boots and verified AP_IN_SLEEP_L GPIO is high. BRANCH=None Change-Id: Icd59fa366c162e7443b8932a851e65f110f551ab Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@google.com>
2018-09-12mainboards: Add SMMSTORE region in chromeos configsPatrick Georgi
Only for those that are x86 and also have a RW_LEGACY region. The assumption is that all devices touched have 64k block sizes when choosing size and alignment of the region. Change-Id: I12addb137604f003d1296f34f555dae219330b18 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-28google/kukui: Init SPI bus for ECTristan Shieh
Set EC SPI bus config and init SPI bus according to the config. BUG=b:80501386 BRANCH=none TEST=EC is not working yet. This makes depthcharge go forward a little. Change-Id: Id9209b6429417430cfcf7f5a5a1659e7e4bc7866 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28251 Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28google/kukui: Set up GPIOs for ChromeOSTristan Shieh
Set up EC interrupt GPIO to boot depthcharge. Without this patch, depthcharge will fail to detect EC interrupt GPIO. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and see in logs, that depthcharge detects EC interrupt GPIO. Change-Id: I0ec2c70c189a059219954e0384aaf98995285728 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-17arm64: Factor out common parts of romstage execution flowJulius Werner
The romstage main() entry point on arm64 boards is usually in mainboard code, but there are a handful of lines that are always needed in there and not really mainboard specific (or chipset specific). We keep arguing every once in a while that this isn't ideal, so rather than arguing any longer let's just fix it. This patch moves the main() function into arch code with callbacks that the platform can hook into. (This approach can probably be expanded onto other architectures, so when that happens this file should move into src/lib.) Tested on Cheza and Kevin. I think the approach is straight-forward enough that we can take this without testing every board. (Note that in a few cases, this delays some platform-specific calls until after console_init() and exception_init()... since these functions don't really take that long, especially if there is no serial console configured, I don't expect this to cause any issues.) Change-Id: I7503acafebabed00dfeedb00b1354a26c536f0fe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28199 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30google/kukui: Enable eMMC in bootblock.Hung-Te Lin
On kukui board, the eMMC is routed to EC for boot ROM emulation when loading bootblock, and should be set back to real eMMC as early as possible after bootblock is loaded. BUG=b:80501386 TEST=make; boots and verified BOOTBLOCK_EN_L GPIO is enabled. BRANCH=None Change-Id: Ifefb2e26ed048c38595907cc0875757410129828 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/27601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-27google/kukui: Add SPI NOR supportTristan Shieh
This patch sets SPI flash related configs and inits SPI bus 1 to support SPI NOR flash. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1a18a456f41a7c7daec954e961c9fbee3650493d Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-26mediatek/mt8183: Enable bootblock self-decompressionHung-Te Lin
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. A fully functional bootblock (that can boot into verstage or romstage) is about 38000 bytes. If self decompression (CONFIG_COMPRESS_BOOTBLOCK) is enabled, only 25088 (66%) bytes are needed. Inspired from crosreview.com/1070018. BUG=b:80501386 TEST=manually flashed into kukui and boots into romstage. Change-Id: I7a739866a4ea3bcafe2ff7b9e88d5ed00f3f3e40 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/27599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11google/kukui: Update MMU table in romstage and ramstageTristan Shieh
In order to get better performance, map dram as cached after dram ready in romstage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Need a futher check after dram calibration code ready. Change-Id: Ie541fe08ee1d5b260abbabc0a5c18fb04e602b9c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27304 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11google/kukui: Add MediaTek MT8183 reference boardTristan Shieh
BUG=b:80501386 BRANCH=none TEST=timer and uart work fine Change-Id: I08644892d34925574f791b000b0035d5afad7022 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/26722 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 13:35:25 +0000