summaryrefslogtreecommitdiff
path: root/src/mainboard/google/kukui
AgeCommit message (Collapse)Author
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
Kconfig became stricter on what it accepts, so accomodate before updating to a new release. Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-11-15mb/google/kukui: Add new board 'kakadu'Hung-Te Lin
Add a new Kukui follower 'kakadu'. BUG=None TEST=make # select kakadu Change-Id: I9f25ce90285828c43435e45d9361ee7128d407fa Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36848 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-12mb/google/kukui: Add new configs 'damu' and 'kappa'Hung-Te Lin
New boards introduced to Kukui family. BUG=None TEST=make # select damu and kappa Change-Id: I7154aeee921114b7d12bf586adca250df19a3883 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-01mb/google/kukui: Unselect FATAL_ASSERTElyes HAOUAS
FATAL_ASSERT is used for debugging purpos. Don't select it by default. Change-Id: If4d521827f3d50fb662b89b24d00fb0517e7af2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-20src: Remove unused 'include <string.h>'Elyes HAOUAS
Change-Id: I2a94c3b6282e9915fd2b8136b124740c8a7b774c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-09soc/mediatek/mt8183: Run DRAM full calibrationHuayang Duan
Load the calibration params from flash first and check the correctness of the params. If the params have correct format, perform DRAM fast calibration with these params to reduce bootup time. Otherwise, load the DRAM blob and perform DRAM full calibration. Bootup time of DRAM partial calibration: - 1,349,385 usecs with low frequency - 924,698 usecs with middle frequency - 1,270,089 usecs with high frequency 3,544,172 usecs in total. Bootup time of DRAM fast calibration: - 216,663 usecs with low frequency - 328,220 usecs with middle frequency - 322,612 usecs with high frequency 867,495 usecs in total. BUG=b:139099592 BRANCH=none TEST=emerge-kukui coreboot Change-Id: I8de29b14b1fb24b3b4f351c855c5c4d8f350cc34 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-09soc/mediatek/mt8183: Use cached calibration result for faster bootupHuayang Duan
Load calibration params from flash. If the format of the params is correct, use these calibration params for fast calibration to reduce the bootup time. Bootup time of DRAM partial calibration: - 1,349,385 usecs with low frequency - 924,698 usecs with middle frequency - 1,270,089 usecs with high frequency 3,544,172 usecs in total. Bootup time of DRAM fast calibration: - 216,663 usecs with low frequency - 328,220 usecs with middle frequency - 322,612 usecs with high frequency 867,495 usecs in total. BUG=b:139099592 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I9ef4265dd369a1c276bb02294696556df927e7bc Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35164 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04mb/google/kukui: Extend FMAP to 8MB layoutHung-Te Lin
The SPI flash component requirement for Kukui family is 8M so we should update FMAP for that: - Add more comments for alignment and size recommendation. - Enlarge RO to 4M, and RW_SECTION_{A,B} both ~1.5M. - BOOTBLOCK: 32K->128K, aligned with other ARM boards. - Preserve RW_DDR_TRAINING for new calibration. - Reorder the sections for better alignment. - RW_MISC to contain RW sections that should be merged when creating AU image. BUG=b:134624821 TEST=Built Kukui image and boots. dump_fmap -h image-kukui.bin: # name start end size RW_LEGACY 00700000 00800000 00100000 RW_SHARED 006f7000 00700000 00009000 RW_UNUSED 006f8000 00700000 00008000 SHARED_DATA 006f7000 006f8000 00001000 RW_SECTION_B 00580000 006f7000 00177000 RW_FWID_B 006f6f00 006f7000 00000100 FW_MAIN_B 00582000 006f6f00 00174f00 VBLOCK_B 00580000 00582000 00002000 RW_MISC 00577000 00580000 00009000 RW_ELOG 0057f000 00580000 00001000 RW_DDR_TRAINING 0057d000 0057f000 00002000 RW_NVRAM 0057b000 0057d000 00002000 RW_VPD 00577000 0057b000 00004000 RW_SECTION_A 00400000 00577000 00177000 RW_FWID_A 00576f00 00577000 00000100 FW_MAIN_A 00402000 00576f00 00174f00 VBLOCK_A 00400000 00402000 00002000 WP_RO 00000000 00400000 00400000 RO_VPD 003f8000 00400000 00008000 RO_SECTION 00000000 003f8000 003f8000 RO_FRID 003f7f00 003f8000 00000100 GBB 003f5000 003f7f00 00002f00 COREBOOT 00021000 003f5000 003d4000 FMAP 00020000 00021000 00001000 BOOTBLOCK 00000000 00020000 00020000 Change-Id: Id342d57dc95c6197d05b8a265742a2866c35ae09 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-02mediatek/mt8183: Rename fields of struct sdram_paramsYu-Ping Wu
Two fields of struct sdram_params are renamed for future CL of DRAM full calibration. Field 'impedance' is also removed. BUG=none BRANCH=none TEST=emerge-kukui coreboot Change-Id: I2f9673fd5ea2e62ee971f0d81bdd12aaf565e31c Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35738 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mediatek/mt8183: Init SPM driverDawei Chien
To support mt8183 power saving during suspend to RAM, this patch loads SPM firmware to support SPM suspend. SPM needs its own firmware to do these power saving in the right timing under correct conditions. After linux PM suspends, SPM is able to turn off power for the last CPU and do more power saving for the SoC such as DRAM self-refresh mode and turning off 26M crystal. BUG=none BRANCH=none TEST=suspend/resume passes for LPDDR4 3200 Change-Id: I3393a772f025b0912a5a25a63a87512454fbc86e Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-30mb: remove test-only HWIDsHung-Te Lin
The CONFIG_GBB_HWID can be generated automatically now so we can remove the test-only HWIDs set in board config files. BUG=b:140067412 TEST=Built few boards (kukui, cheza, octopus) and checked HWID: futility gbb -g coreboot.rom Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-25mb/google/kukui: Add new build target 'Juniper'Hung-Te Lin
Add the configuration 'Juniper' for the new mainboard. BUG=b:137517228 TEST=make menuconfig; select 'juniper' and build Change-Id: I94e3ac7f6de3fecf177e344cb217eaecf6362d69 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-17google/kukui: Pass reset gpio parameter to BL31Tristan Shieh
To support gpio reset SoC, we need to pass the reset gpio parameter to BL31. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and ATF(BL31) can get this parameter. Change-Id: Iefa70dc0714a9283a79f97d475b07ac047f5f3b0 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-12mediatek/mt8183: tune EDID for BOE panelPeichao Wang
BUG=b:140545315 TEST=builds Kodama image and verify display working properly Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I52a56f9bbbbef5937a9601f9371e415c74ac9a7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/35317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2019-09-10mb/google/kukui: Enable MT8183_DRAM_EMCPHuayang Duan
MT8183_DRAM_EMCP is enabled for devices using eMCP to run at a high DRAM frequency (e.g., 3600Mbps). BUG=b:80501386 BRANCH=none TEST=Memory test passes on EMCP platform Change-Id: Icf875427347418f796cbf193070bf047844d2267 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34433 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26google/kukui: Enable CHROMEOS_USE_EC_WATCHDOG_FLAGYu-Ping Wu
Kukui AP doesn't remember if the last AP reset was due to AP watchdog. We need to enable CHROMEOS_USE_EC_WATCHDOG_FLAG so that it will query the reset reason from EC. BUG=b:109900671,b:118654976 BRANCH=none TEST=1. run 'mosys eventlog clear; stop daisydog; echo > /dev/watchdog' 2. wait for watchdog reset 3. check 'mosys eventlog list | grep watchdog' Change-Id: I053cc7664bbaf0d3fcae26ba9481a0ad700dca90 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-23mb/google/kukui: Add panel for KodamaPeichao Wang
Declare the following panel for Kodama: - AUO B101UAN08.3 BUG=b:139699622 TEST=builds Kodama image and working properly Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I3f688ffd0ece6afac08d353ab5a6cf1cf876b32f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35001 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22mb/google/kukui: Add flapjack panelsHung-Te Lin
Add panels supported by flapjack. Change-Id: I547bf6f26bdbfed52a00c8cfb268d4e7c17ed889 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21mb/google/kukui: Move panel description to CBFS filesHung-Te Lin
The panel description may be pretty large (for example, 1.3k for BOE TV101) due to init commands and we should only load the right config when display is needed. BUG=None TEST=make -j; boots and see display on Krane. Change-Id: I2560a11ecf7badfd0605ab189d57ec9456850f75 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21mediatek/mt8183: add scp voltage initializationHsin-Hsiung Wang
Add scp voltage initialization. BUG=b:135985700 BRANCH=none Test=Boots correctly on Kukui and scp can boot up normally Change-Id: I5afb60af3c14490e20f28f1c089cfca42ddf7fcf Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-16mediatek/mt8183: Add SAMSUNG 4GB LPDDR4X discrete DDR supportHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test passes on Kukui. Change-Id: I27164f0909edb9d9398835e292fb845f0e342391 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34532 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/kukui: Report panel manufacturer nameHung-Te Lin
The src/lib/edid now supports reporting manufacturer name so we should define that in MIPI panels and print out in initialization. BUG=None TEST=emerge-kukui coreboot; boots properly Change-Id: If844da84ecca31307127b14c66bbe17c408699f3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-15soc/mediatek: Change DSI init commands to take flexible length arrayHung-Te Lin
The fixed size of init command in lcm_init_table is wasting lots of space and we should change to packed array since the command buffer already provides length information. With this change, BOE panel init commands have been reduced from 4848 bytes to 1309 bytes. BUG=b:80501386,b:117254947 TEST=emerge-kukui coreboot chromeos-bootimage; Boots properly Change-Id: I359dde8e6f2e1c0983f4677193bb47a7ae497ca6 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34778 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/kukui: Support eDP panels via PS8640Hung-Te Lin
Some Kukui variants may have eDP panels connected via a PS8640 MIPI bridge which we may retrieve EDID dynamically. BUG=b:b:137517228 TEST=emerge-jacuzzi coreboot chromeos-bootimage; boots and see display. Change-Id: I85aac5255e6a3e6019299670486214ecffbf9801 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34516 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/kukui: Add panel for KodamaPeichao Wang
Declare the following panel for Kodama: - BOE TV101WUM-N53 BUG=b:138156559 TEST=builds Kodama image and working properly Change-Id: I129cb6bf084b76da3ad33b7a19e38e884442b1aa Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34505 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/kukui: Add panel for KukuiHung-Te Lin
Support Kukui rev 2 panel (via SSD2858). BUG=b:129299873 BRANCH=none TEST=Build as Kukui and boots on Rev 2 unit. Change-Id: Icc16c4297eb3c6b6a4770a36661a2e3cab418048 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-15mb/google/kukui: Add panels for KraneJitao Shi
Declare the following panels for Krane: - BOE TV101WUM-NL6 - AUO KD101N80-45NA The edid info and init command are from: https://crrev.com/c/1565758 BUG=b:129299873 BRANCH=none TEST=Builds krane image and boots properly. Change-Id: Id19c6c2b4c1c728c39aa26301adf7d6fb5046403 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-15mb/google/kukui: Initialize displayHung-Te Lin
Many devices in Kukui family will be using MIPI panels, which needs hard-coded EDID and initialization commands. And because each device may have its own layout and ID, there should be very few devices sharing same panel configuration. As a result, we want to put panel data (EDID and init commands) into board-specific modules, provided by `get_panel_description` function. The panel numeric ID is identified by ADC 2, and is currently available as higher 4 bits of sku_id(). After ID is retrieved, the get_panel_description should return a reference to the EDID and table of init commands. The default implementation is to simply return NULL, and the data for real devices should be provided by panel_*.c in further commits. BUG=b:80501386,b:117254947 BRANCH=none TEST=boot correctly on Kukui Change-Id: I19213aee1ac0f69f42e73be9e5ab72394f412a01 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-31mb/google/kukui: Enable config for coreboot displayYongqiang Niu
BUG=b:80501386,b:117254947 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I478e06686158dd77b075bcef8a41763ae26c79f9 Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31521 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21mediatek/mt8183: support more EMCP LPDDR4X DDR bootupHuayang Duan
Support SANDISK SDADA4CR-128G, SAMSUNG KMDP6001DA-B425, KMDV6001DA-B620 EMCP LPDDR4X DDR bootup. BUG=b:80501386 BRANCH=none TEST=Boots correctly on EMCP DRAM Change-Id: I7de4c9a27282d3d00f51adf46dcb3d2f3984bfff Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-07-21mb/google/kukui: Introduce a new 'Jacuzzi' familyHung-Te Lin
The 'Jacuzzi' is a different base board that will share most of Kukui design. For AP firmware, there will be only a few changes expected, mostly in display (for MIPI bridge) and EC/keyboard so we want to create it as variants inside Kukui folder, not forking a new directory. BUG=b:137517228 TEST=make menuconfig; select 'krane' and build; select 'jacuzzi' and build. Change-Id: Ic2b04e01628dc3db40f79f9bbdd5cc77d9466753 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34344 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16mediatek/mt8183: add a new configuration for KodamaPeichao Wang
These configuration files can be used to build Kodama firmware. BUG=b:135490566 TEST=check variant: kodama via make menuconfig; make -j Change-Id: I72e80e800ba041df1dda2b0f84470d1ef58bc946 Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33616 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11google/kukui: Adjust LCM ID voltagesYu-Ping Wu
Currently some of the LCM ID voltage gaps are below 100mV. For example, the voltage difference between ID 2 and 3 is 503-440=63mV. To reduce the risk of misrecognition from the hardware level, the voltages are adjusted so that all the voltage gaps are larger than 100mV. The RD2 resistor values are also updated. BUG=b:136987483 TEST=emerge-kukui coreboot Change-Id: Ib5c1f927fb54d8c9579f030e42eeec5a27daaceb Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34192 Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11board/kukui: Remove ADC tolerance from boardidHung-Te Lin
The tolerance of ADC is +-10mV, but the resistors may also introduce 1% variation, and causing the final measured voltage to vary around 5%. By the advisory from hardware team, checking the tolerance seems not really solving or helping anything so we should just ignore that and try to find best matched ID (this also aligns to what Gru did). BUG=b:136990271 TEST=Booted on Krane and no longer seeing ADC out of range BRANCH=None Change-Id: Ie02ca5aaafbcfa8f411d973ad0266eee385d6878 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34161 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mediatek/mt8183: support SAMSUNG and MICRON EMCP LPDDR4X DDR bootupHuayang Duan
Support SAMSUNG KMDP6001DA-B425 and MICRON MT29VZZZAD8DQKSL EMCP LPDDR4X DDR From the calibration log of MICRON MT29VZZZAD8DQKSL, we found the begin pass range of RX window earlier than with other DDR type. So need change the DQS starting offset to increase the scan range of RX window. BUG=b:80501386 BRANCH=none TEST=Boots correctly on EMCP DRAM Change-Id: I5fcc8673a2fbd7ec3a8776ab61c57f8903ddda20 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
2019-06-21google/kukui: Increase SPI flash speed to boot fasterMengqi Zhang
Increase SPI flash speed from 26MHz to 56MHz and set correct tick_dly to get faster boot process. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: I8f44883b4f4a198146330caf5420dc39d5592a0a Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32462 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21mediatek: Add SPI tick_dly settingMengqi Zhang
Add spi tick_dly setting for high-speed spi xfer. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: Ie49fc3efe2a4a6dcdf2a2fc4c91b47e35d4f086e Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mediatek/mt8183: Add SPI GPIO driving settingMengqi Zhang
Set SPI GPIO driving to support SPI FLASH. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; emerge-elm coreboot Change-Id: I95002ec71abd751c33c089185db04ed4a8686699 Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32460 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21google/kukui: Enable RTCYou-Cheng Syu
Enable RTC so that we can see correct timestamp in CrOS eventlogs. BUG=b:134461866 TEST='mosys eventlog list' shows correct timestamp on Kukui Change-Id: Ie9ef7c9343c781e348429cd5376a4a5519641e16 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-06-21google/kukui: Revise FMAP firmware layoutHung-Te Lin
Adjust FMAP sections that - ELOG only needs 4K (by driver limitation) - SHARED_DATA only needs 4K or less (for netboot params) - SMMSTORE is probably not needed since UEFI@ARM is not available yet - VPD can be smaller (most x86 devices have only 16/8K for RO/RW) - Increase RW_LEGACY to 1M (recommended value) - Move all new saved space to CBFS BUG=b:134624821 TEST=Built Kukui image and boots on Rev2 units. Change-Id: Id2910df73ea47bfa32e056d631d1c3e5f1eed0d1 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-21mediatek/mt8183: Calibrate vsim2 to 2.7 VHsin-Hsiung Wang
The default voltage of vsim2 is set to 2.76V for sim card usage. In general, 2.76V of vsim2 is composed of 2.7V main voltage and 0.06V calibration voltage. However, vsim2 is used for the tx_ovdd power of display port IT6505 on the kukui board design which needs 2.7V. So we set it to 2.7V with modifying calibration value. BUG=b:126139364 BRANCH=none TEST=measure vsim2 voltage with multimeter Change-Id: I4dffdde89cbde91286d92e6c2b445f0b3d0ad2fe Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-13mainboard: remove "recovery" gpio, selectively add "presence" gpio.Matt Delco
The gpio table is only used by depthcharge, and depthcharge rarely has a need for the "recovery" gpio. On a few boards it does use the gpio as a signal for confirming physical presence, so on that boards we'll advertise the board as "presence". All these strings probably should have been #defines to help avoid typos (e.g., the "ec_in_rw" in stout seems questionable since everybody else uses "EC in RW"). Cq-Depend: chromium:1580454 BUG=b:129471321 BRANCH=None TEST=Local compile and flash (with corresponding changes to depthcharge) to 2 systems, one with a "presence" gpio and another without. Confirmed that both systems could enter dev mode. Change-Id: Id6d62d9e48d3e6646cbc1277ea53f0ca95dd849e Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-07google/kukui: Support sound in boot processJiaxin Yu
Configure and enable GPIO for speaker amp max98357a. BUG=b:117254418 TEST=Build pass and verified on kukui p1 board BRANCH=None Change-Id: I97655702dff402245326d2eff71fae0e336df9f5 Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-06google/kukui: Raise the CPU frequencyTristan Shieh
Run CPU at the highest freqency (1989MHz) to speed up the boot time. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui Change-Id: I703ffcb99367f87e6792a72485f5634e0505e5ac Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32466 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-22board/kukui: Support ADC value for NCHung-Te Lin
When the components like LCM ID are not installed (i.e., NC), ADC will return some value with much larger variation from standard value (out of the tolerance we set). To support that, we should check tolerance only on non-NC voltages. Also improve the error messages so we can see the ADC raw values instead of simple assertion error (which makes debugging more difficult since we have to build another firmware image just to print the values). BUG=None TEST=Booted on Kukui and got correct SKU ID for NC LCMID. BRANCH=None Change-Id: I8d00956e0e3b48ddbcaa505dd3ade24720c3b4ad Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32353 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-17google/kukui: Get write protection status from WP GPIOHung-Te Lin
Write protection (get_write_protect_state) was hard-coded to 0 and should be fixed to read from correct GPIO (PERIPHERAL_EN0 from schematics). BUG=b:130681408 TEST=make -j; boots on Kukui Rev2. BRANCH=None Change-Id: I75b98b1d587abe5e8cdf3df28ea661bc1ffa19f9 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-04-15google/kukui: Include LCD module identifier (LCM ID) into SKU IDHung-Te Lin
Kukui is using MIPI display panel and needs some identifier to tell payloads which LCD module is installed, and to select right kernel device tree. Following Scarlet, the decision is to embed LCD module ID as part of SKU ID. The LCM ID is using a different voltage mapping table from the rest. Considering the complexity in computation of SKU ID, it is better to move the cache logic from get_index to caller. Also revise the mapping table since ADC on 8183 only supports 12 levels. BUG=b:129299873 TEST=make -j; boots on Kukui Rev2 unit. Change-Id: Ib0c00bc8ce3c71c445c5c4561403ce8ef4dd5844 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32263 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-11google/kukui: Add variant 'Krane'Hung-Te Lin
Add the new configuration 'Krane' that will need at least its own EC. There's currently no difference in coreboot side. BUG=b:130011505 TEST=make menuconfig; make -j # select board=Krane BRANCH=None Change-Id: Ibb2ec42b08f9a51b22c22f3fe99b203f5eb31627 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-11google/kukui: Use internal CR50_IRQ pull-upYou-Cheng Syu
For Kukui CR50_IRQ pin, we're going to replace external pull-up with internal pull-up. This change won't break older boards, so we can just always do that when setting up GPIOs. BUG=b:124821269 BRANCH=none TEST=Waveform looks correct. Change-Id: Ib1a90dce583a6aa0cec8ac8ba96d1362f50c16a8 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-04-09google/kukui: Configure AP_IN_SLEEP_L correctlyYou-Cheng Syu
This pin should be set to its alternative function SRCLKENA0 instead of GPIO, so that SPM (a power management component of MT8183) can control it. BUG=b:113367227 BRANCH=none TEST=1. Boot. Run 'powerinfo' in EC console and see power state in S0. 2. Run 'powerd_dbus_suspend --wakeup_timeout=10', and then run 'powerinfo' in EC console and see power state in S3. 3. Wait until AP resume. 4. Run 'powerinfo' in EC console and see power state back to S0. Change-Id: I0a7e34f95381dec17eb6d166d6552c12e021bd9a Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32120 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
For Chrome OS (or vboot), The PRESERVE flags should be applied on following sections: RO_PRESERVE, RO_VPD, RW_PRESERVE, RW_ELOG, RW_NVRAM, RW_SMMSTORE, RW_VPD, RO_FSG (b:116326638), SI_GBE (chromium:936768), SI_PDR (chromium:936768) With the new PRESERVE flag, we don't need RO_PRESERVE and RW_PRESERVE in the future. But it's still no harm to use it if there are multiple sections all needing to be preserved. BUG=chromium:936768 TEST=Builds google/eve and google/kukui inside Chrome OS source tree. Also boots successfully on eve and kukui devices. Change-Id: I6664ae3d955001ed14374e2788d400ba5fb9b7f8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-02-28google/kukui: Add RTC initializationRan Bi
Initialize RTC at ROM stage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I9d9c68755e8a6ac65dd794211e6ccf06e5057567 Signed-off-by: Ran Bi <ran.bi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-02-27flapjack: use sku_id 0 for un-provisioned boardYH Lin
Instead of using 2, 0 is now used for non-CBI provisioned board or corrupted CBI board to confrom to the sku encoding. BUG=b:123676982 BRANCH=kukui TEST=test with un-provisioned board to verify the sku_id. Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I66f29f8a46cd774b40354def7d3623ec44cb96ce Reviewed-on: https://review.coreboot.org/c/31623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-02-26flapjack: get sku_id from ec (cbi)YH Lin
On flapjack, retrieve the board information via CBI interface. Also reserving 0x2 sku_id for the case of un-provisioned board as this is the id used prior to the readiness of cbi. BUG=b:123676982 BRANCH=kukui TEST=provisioned cbi info and verify the sku_id. Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: Iad7a52df38e2045abbdded8ba0a1f1544de961fc Reviewed-on: https://review.coreboot.org/c/31586 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-05mb/google/kukui: Add default HWID for Chrome OSHung-Te Lin
The default value for Chrome OS HWID should be different. Calculated as HWID v1. BUG=b:123336677 BRANCH=kukui TEST=build and boots properly. Change-Id: I39c640562c1c3b117292b8abacd36a4a9c2fa6c6 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/31088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-31google/kukui: Set GPIO_RESET to output modeTristan Shieh
In payloads, we didn't set GPIO modes. We have to set up GPIO mode in coreboot for payloads. BUG=b:80501386 BRANCH=none TEST=HW reboot works in depthcharge Change-Id: Ibd2c6c071871edc59497fbb245cdbec6a814f621 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31148 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-29google/kukui: Move some initialization from bootblock to verstageYou-Cheng Syu
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. This CL moves some initialization steps from bootblock to verstage. This will save us about 2700 bytes (before compression) / 1024 bytes (after LZ4 compression) in bootblock. In case of CONFIG_VBOOT is disabled, these initialization steps will be done in romstage. BRANCH=none BUG=b:120588396 TEST=manually boot into kernel Change-Id: I9968d88c54283ef334d1ab975086d4adb3363bd6 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/30331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-29google/kukui: Implement HW reset functionTristan Shieh
Asserting GPIO PERIPHERAL_EN8 will send a signal to EC to trigger a HW reset for SoC and H1. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; manually verified the do_board_reset() on Kukui P1 Change-Id: I9afad84af2031a766bc08fc76c8b5f55588c453a Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31118 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-29mediatek: Separate WDT reset function from WDT driverTristan Shieh
Separate WDT reset function from WDT driver, then we can use the common WDT driver and have a board-specific reset function on different boards. In Kukui, we plan to use GPIO HW reset, instead of WDT reset. Add config "MISSING_BOARD_RESET" in Kukui to pass the build for now. BUG=b:80501386 BRANCH=none TEST=emerge-elm coreboot; emerge-kukui coreboot; Change-Id: Ica07fe3a027cd7e9eb6d10202c3ef3ed7bea00c2 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31121 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24mediatek/mt8183: Move some initialization into mt8183_early_initYou-Cheng Syu
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. This CL adds a new function mt8183_early_init, which includes all initializations that should be done in early stages. All mainboards using MT8183 should manually call it in either bootblock or verstage. BRANCH=none BUG=b:120588396 TEST=manually boot into kernel Change-Id: I35d7ab875395da913b967ae1f7b72359be3e744a Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-23google/kukui: Revise FMAP layout for larger CBFSHung-Te Lin
Kukui with vboot enabled will build with `detachable_ui`, which needs larger space in CBFS for more complicated assets. So we need to revise FMAP sections: - BOOTBLOCK (not really used) only needs <= 32K. - GBB can be much smaller since assets moved from GBB to CBFS. - FMAP is re-ordered (with the cost of less efficient in bsearch) so CBFS can get larger continuous space. - COREBOOT(CBFS) should take all space left. Since FMAP and COREBOOT have changed location, the system will need to reflash EC (which contains the new bootblock) as well. BUG=b:123202015 TEST=Builds and boots on Kukui P1 Change-Id: I22cff99dca8c396c5897c3f6631721af40f3ffbd Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/31035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-23mediatek/mt8183: Add Micron 4GB LPDDR4X DDR supportHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: I985c5061ce4ed4d88a17619aa5cde7d0121dd3a3 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-13mb/google/kukui: add flapjack on top of kukuiYH Lin
Add placeholder for future flapjack additions/modifications. BUG=None BRANCH=kukui TEST=build with kukui/flapjack configurations Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: Ib9cd39e284f19b9179da73ed9f2b13d97442960e Reviewed-on: https://review.coreboot.org/c/30859 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10google/kukui: Correct boardid sources and add sku_idHung-Te Lin
Kukui is going to use ADC#4 as SKU ID, and utilizing EC BoardID as global board_id (i.e., board revision). BUG=b:122060615 TEST=make; manually tested on Kukui P1 board. Change-Id: I7bba368c141a7ba6db11f24b8e8e7158f0fc729e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Complete board ID ADC valuesHung-Te Lin
The ID from ADC on Kukui supports 16 different values and we should list all voltage values ahead. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ic3abe07abfe818ca68e180c262fd431d1167b801 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Correct boardid init valuesHung-Te Lin
From `boardid.h`, the uninitialized ID values should be BOARD_ID_INIT instead of BOARD_ID_UNKNOWN. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ie5267e575e38b92ec64a7317defbd00ee153fa0a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-09google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flashTristan Shieh
Reading nvdata from non-volatile flash storage. With this patch, it will pass the firmware test that corrupts FW_MAIN_A and boots up with FW_MAIN_B. BUG=b:80501386 BRANCH=none Test=test_that --board=kukui 172.23.213.147 firmware_CorruptFwSigA Change-Id: I9ef6bff019ee986ff018202bfd4d4a875526ec6c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/30701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-03google/kukui: Initialize DRAM from romstageJunzhi Zhao
Add DRAM support for google kukui. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1ed01404343745c883b22a648966327bdcabc5c2 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/28438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-12-05google/kukui: Support TPMTristan Shieh
Init SPI bus 0 to connect TPM, configure interrupt type of GPIO CR50_IRQ, implement tis_plat_irq_status(), and set up chromeos GPIO table for TPM interrupt. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui. Change-Id: Ieaa6ae65fbfb5ab6323e226e8171dd7a992c3a39 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/29192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-29mediatek/mt8183: Add MT6358 PMIC supportHsin-Hsiung Wang
PMIC provides power features like auxadc, buck/ldo, interrupt-controller..etc BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ic247faf73517f6512f9c9a69ba0254c749d68d4c Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/29422 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-02google/kukui: Add board id supportTristan Shieh
Get board id from AUXIN4 and RAM code from AUXIN3. BUG=b:80501386 BRANCH=none TEST=AUXIN4 is 0.074v and AUXIN3 is 0.212v on P0. AUXIN4 is 0.212v and AUXIN3 is 0.212v on P1. Change-Id: I50533e851d2fae66ae8c5e4e1aa36708d9058e94 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/29062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-25google/kukui: Support recovery modeTristan Shieh
Get recovery mode switch from EC and pass it to payload. BUG=b:80501386 BRANCH=none Test: Boots correctly on Kukui. Change-Id: Ib92afca885e5a97ec4646f55f2279ef56a61af5a Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/29190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-10-17google/kukui: Configure USBTristan Shieh
Set up USB host controller. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Iec98f3dc1bbf3dda3d28dbefad15339d48608c7e Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-09-21google/kukui: Set up EC_IN_RW GPIO for ChromeOSTristan Shieh
Set up EC_IN_RW GPIO to boot depthcharge. Without this patch, depthcharge will fail to tell if the EC firmware is RW. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and see in logs, that depthcharge detects EC_IN_RW GPIO. Change-Id: Icb39d663f65b72e0ad54059c9590d9693106ee25 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28670 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-16google/kukui: Configure EMMCTristan Shieh
Set up EMMC gpios for payloads. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1e7ee9bfe3a26ed04374e8c74243f48552a1d254 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-09-16google/kukui: Notify EC that AP is in S0Hung-Te Lin
We have a pin from AP to EC, called AP_IN_SLEEP_L (SRCLKENA0 on AP side, pad R23) that is supposed to be high in S0, and low in S3 (and X/don't care in S5). This should be set as early as possible in bootblock. BUG=b:113367227 TEST=make; boots and verified AP_IN_SLEEP_L GPIO is high. BRANCH=None Change-Id: Icd59fa366c162e7443b8932a851e65f110f551ab Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@google.com>
2018-09-12mainboards: Add SMMSTORE region in chromeos configsPatrick Georgi
Only for those that are x86 and also have a RW_LEGACY region. The assumption is that all devices touched have 64k block sizes when choosing size and alignment of the region. Change-Id: I12addb137604f003d1296f34f555dae219330b18 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-28google/kukui: Init SPI bus for ECTristan Shieh
Set EC SPI bus config and init SPI bus according to the config. BUG=b:80501386 BRANCH=none TEST=EC is not working yet. This makes depthcharge go forward a little. Change-Id: Id9209b6429417430cfcf7f5a5a1659e7e4bc7866 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28251 Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-28google/kukui: Set up GPIOs for ChromeOSTristan Shieh
Set up EC interrupt GPIO to boot depthcharge. Without this patch, depthcharge will fail to detect EC interrupt GPIO. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and see in logs, that depthcharge detects EC interrupt GPIO. Change-Id: I0ec2c70c189a059219954e0384aaf98995285728 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-17arm64: Factor out common parts of romstage execution flowJulius Werner
The romstage main() entry point on arm64 boards is usually in mainboard code, but there are a handful of lines that are always needed in there and not really mainboard specific (or chipset specific). We keep arguing every once in a while that this isn't ideal, so rather than arguing any longer let's just fix it. This patch moves the main() function into arch code with callbacks that the platform can hook into. (This approach can probably be expanded onto other architectures, so when that happens this file should move into src/lib.) Tested on Cheza and Kevin. I think the approach is straight-forward enough that we can take this without testing every board. (Note that in a few cases, this delays some platform-specific calls until after console_init() and exception_init()... since these functions don't really take that long, especially if there is no serial console configured, I don't expect this to cause any issues.) Change-Id: I7503acafebabed00dfeedb00b1354a26c536f0fe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28199 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30google/kukui: Enable eMMC in bootblock.Hung-Te Lin
On kukui board, the eMMC is routed to EC for boot ROM emulation when loading bootblock, and should be set back to real eMMC as early as possible after bootblock is loaded. BUG=b:80501386 TEST=make; boots and verified BOOTBLOCK_EN_L GPIO is enabled. BRANCH=None Change-Id: Ifefb2e26ed048c38595907cc0875757410129828 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/27601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-27google/kukui: Add SPI NOR supportTristan Shieh
This patch sets SPI flash related configs and inits SPI bus 1 to support SPI NOR flash. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1a18a456f41a7c7daec954e961c9fbee3650493d Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-26mediatek/mt8183: Enable bootblock self-decompressionHung-Te Lin
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. A fully functional bootblock (that can boot into verstage or romstage) is about 38000 bytes. If self decompression (CONFIG_COMPRESS_BOOTBLOCK) is enabled, only 25088 (66%) bytes are needed. Inspired from crosreview.com/1070018. BUG=b:80501386 TEST=manually flashed into kukui and boots into romstage. Change-Id: I7a739866a4ea3bcafe2ff7b9e88d5ed00f3f3e40 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/27599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11google/kukui: Update MMU table in romstage and ramstageTristan Shieh
In order to get better performance, map dram as cached after dram ready in romstage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Need a futher check after dram calibration code ready. Change-Id: Ie541fe08ee1d5b260abbabc0a5c18fb04e602b9c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27304 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11google/kukui: Add MediaTek MT8183 reference boardTristan Shieh
BUG=b:80501386 BRANCH=none TEST=timer and uart work fine Change-Id: I08644892d34925574f791b000b0035d5afad7022 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/26722 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>