summaryrefslogtreecommitdiff
path: root/src/mainboard/google/kukui
AgeCommit message (Expand)Author
2021-01-19mb/google/kukui: Add discrete EMCP LPDDR4X table for Kakadu/Katsuxuxinxiong
2021-01-15mb/google/kukui: Add new ddr architecture support for kukuiShaoming Chen
2021-01-01mb/google/kukui: Add panel api after dsi startJitao Shi
2020-12-24mb/google/kukui: Add a new config 'Katsu'Sunway
2020-12-17drivers: Replace set_vbe_mode_info_validPatrick Rudolph
2020-12-15mb/google/kukui: help payload to identify correct speaker amp typeHung-Te Lin
2020-12-10lib/edid_fill_fb: Support multiple framebuffersPatrick Rudolph
2020-12-02cbfs: Simplify load/map API names, remove type argumentsJulius Werner
2020-11-20soc/mediatek: Move auxadc driver from MT8183 to commonPo Xu
2020-11-16mb/google/kukui: Fix LCD sequence T3 fail issueTao Xia
2020-11-02mb/google/kukui: Enable MT8183_DRAM_EMCP for kakaduSunway
2020-10-27mb/google/kukui: change Jacuzzi followers LCMID to fixed valueKevin Chiu
2020-10-19mb/google/kukui: Support SKU from camera EEPROMHung-Te Lin
2020-10-08soc/mediatek: Add function to raise the CPU frequency of MT8192Weiyi Lu
2020-09-22mb/google: Drop unneeded empty linesElyes HAOUAS
2020-09-08mb/google/kukui: Add LPDDR4X Samsung K4UBE3D4AA-MGCR 4GB supportKevin Chiu
2020-09-02mb/google/kukui: Add LPDDR4X support for fennel/cerise/sternxuxinxiong
2020-08-30mb/google/kukui: Add LPDDR4X Samsung K4UBE3D4AA-MGCR 4GB support for burnet/e...Kevin Chiu
2020-08-24mb/google/kukui: Add LPDDR4X MT53E2G32D4NQ-046 8GB support for burnet/escheKevin Chiu
2020-08-12mb/google/kukui: revise per-device memory mapping tableHung-Te Lin
2020-08-06mb/google/kukui: Add ddr geometry to support 6GB, 8GB DDR bootupHuayang Duan
2020-08-06mb/google/kukui: Add a new config 'Fennel'xiatao5
2020-08-03mb/google/kukui: Add Micron 8GB discrete LPDDR4X DDR supportHuayang Duan
2020-08-03mb/google/kukui: indent config names for burnet and escheHung-Te Lin
2020-07-27mb/google/kukui: Add discrete LPDDR4X DDR table support for burnet/escheKevin Chiu
2020-07-26mb/google/kukui: send SKU ID to EC for device-specific configurationHung-Te Lin
2020-07-23mb/google/kukui: Add new configs 'esche' and 'burnet'Kevin Chiu
2020-07-22mb/google/kukui: revise config structure for Jacuzzi followersHung-Te Lin
2020-07-16mb/google/kukui: Add new config 'willow'Sheng-Liang Pan
2020-07-14mb/google/kukui: Add new configs 'Cerise' and 'Stern'xuxinxiong
2020-06-22mb/google/kukui: Add Hynix 4GB discrete LPDDR4X DDR supportHuayang Duan
2020-06-13treewide: Add Kconfig variable MEMLAYOUT_LD_FILEFurquan Shaikh
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
2020-05-18mainboard/*/*/*.cb: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-18mainboard/*/*/Kconfig*: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-13src: Remove unused '#include <stddef.h>'Elyes HAOUAS
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-11mb/google/kukui: fix screen scrolling on devices using anx7625Paul Ma
2020-05-11mb/google/kukui: Fix backlight flash white before show logoJitao Shi
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
2020-04-22mb/google/kukui: kakadu: update the EDID and sequenceScott Chao
2020-04-11mb/google/kukui: correct board nameScott Chao
2020-04-06mb/google/kukui: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2020-03-07chromeos: stop sharing write protect GPIO with depthchargeJoel Kitching
2020-02-17mb/google/kukui: fine tune the video timing of panel-BOE_TV101WUM_N53Jitao Shi
2020-02-17mb/google/kukui: Add panel for KakaduCasper Chang
2020-01-14mb/google/kukui: Support panels using ANX7625Hung-Te Lin
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
2019-11-15mb/google/kukui: Add new board 'kakadu'Hung-Te Lin
2019-11-12mb/google/kukui: Add new configs 'damu' and 'kappa'Hung-Te Lin
2019-11-01mb/google/kukui: Unselect FATAL_ASSERTElyes HAOUAS
2019-10-20src: Remove unused 'include <string.h>'Elyes HAOUAS
2019-10-09soc/mediatek/mt8183: Run DRAM full calibrationHuayang Duan
2019-10-09soc/mediatek/mt8183: Use cached calibration result for faster bootupHuayang Duan
2019-10-04mb/google/kukui: Extend FMAP to 8MB layoutHung-Te Lin
2019-10-02mediatek/mt8183: Rename fields of struct sdram_paramsYu-Ping Wu
2019-09-30mediatek/mt8183: Init SPM driverDawei Chien
2019-09-30mb: remove test-only HWIDsHung-Te Lin
2019-09-25mb/google/kukui: Add new build target 'Juniper'Hung-Te Lin
2019-09-17google/kukui: Pass reset gpio parameter to BL31Tristan Shieh
2019-09-12mediatek/mt8183: tune EDID for BOE panelPeichao Wang
2019-09-10mb/google/kukui: Enable MT8183_DRAM_EMCPHuayang Duan
2019-08-26google/kukui: Enable CHROMEOS_USE_EC_WATCHDOG_FLAGYu-Ping Wu
2019-08-23mb/google/kukui: Add panel for KodamaPeichao Wang
2019-08-22mb/google/kukui: Add flapjack panelsHung-Te Lin
2019-08-21mb/google/kukui: Move panel description to CBFS filesHung-Te Lin
2019-08-21mediatek/mt8183: add scp voltage initializationHsin-Hsiung Wang
2019-08-16mediatek/mt8183: Add SAMSUNG 4GB LPDDR4X discrete DDR supportHuayang Duan
2019-08-15mb/google/kukui: Report panel manufacturer nameHung-Te Lin
2019-08-15soc/mediatek: Change DSI init commands to take flexible length arrayHung-Te Lin
2019-08-15mb/google/kukui: Support eDP panels via PS8640Hung-Te Lin
2019-08-15mb/google/kukui: Add panel for KodamaPeichao Wang
2019-08-15mb/google/kukui: Add panel for KukuiHung-Te Lin
2019-08-15mb/google/kukui: Add panels for KraneJitao Shi
2019-08-15mb/google/kukui: Initialize displayHung-Te Lin
2019-07-31mb/google/kukui: Enable config for coreboot displayYongqiang Niu
2019-07-21mediatek/mt8183: support more EMCP LPDDR4X DDR bootupHuayang Duan
2019-07-21mb/google/kukui: Introduce a new 'Jacuzzi' familyHung-Te Lin
2019-07-16mediatek/mt8183: add a new configuration for KodamaPeichao Wang
2019-07-11google/kukui: Adjust LCM ID voltagesYu-Ping Wu
2019-07-11board/kukui: Remove ADC tolerance from boardidHung-Te Lin
2019-06-21mediatek/mt8183: support SAMSUNG and MICRON EMCP LPDDR4X DDR bootupHuayang Duan
2019-06-21google/kukui: Increase SPI flash speed to boot fasterMengqi Zhang
2019-06-21mediatek: Add SPI tick_dly settingMengqi Zhang
2019-06-21mediatek/mt8183: Add SPI GPIO driving settingMengqi Zhang
2019-06-21google/kukui: Enable RTCYou-Cheng Syu
2019-06-21google/kukui: Revise FMAP firmware layoutHung-Te Lin
2019-06-21mediatek/mt8183: Calibrate vsim2 to 2.7 VHsin-Hsiung Wang
2019-05-13mainboard: remove "recovery" gpio, selectively add "presence" gpio.Matt Delco
2019-05-07google/kukui: Support sound in boot processJiaxin Yu
2019-05-06google/kukui: Raise the CPU frequencyTristan Shieh
2019-04-22board/kukui: Support ADC value for NCHung-Te Lin
2019-04-17google/kukui: Get write protection status from WP GPIOHung-Te Lin
2019-04-15google/kukui: Include LCD module identifier (LCM ID) into SKU IDHung-Te Lin
2019-04-11google/kukui: Add variant 'Krane'Hung-Te Lin
2019-04-11google/kukui: Use internal CR50_IRQ pull-upYou-Cheng Syu
2019-04-09google/kukui: Configure AP_IN_SLEEP_L correctlyYou-Cheng Syu
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 06:23:53 +0000