summaryrefslogtreecommitdiff
path: root/src/mainboard/google/kahlee/variants
AgeCommit message (Expand)Author
2019-06-19grunt: Change Bayhub eMMC base clock to 200MHzRaul E Rangel
2019-06-11mainboard/google/kahlee: Reduce VRAM to 16MBMartin Roth
2019-05-10mainboard/google/kahlee: Fix Micron MT40A512M16TB-062E:J SPD CRC errorKevin Chiu
2019-05-08soc/amd/stoneyridge: Rename AcpiMmio blocksMarshall Dawson
2019-03-21grunt: Mark RW_LEGACY as CBFSMathew King
2019-03-14mb/google/kahlee/aleena: Add EC_ENABLE_TBMC_DEVICEEdward Hill
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
2019-03-07mainboard/google/kahlee: Add additional Micron MT40A512M16TB-062E:J SPD for v...Kevin Chiu
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
2019-03-01device/pci: Fix PCI accessor headersKyösti Mälkki
2019-02-18mb/google/kahlee: Enable mode change as wake source for S3Mengqi Guo
2019-02-18src/mainboard/kahlee: Remove delan variantMartin Roth
2019-02-12google/kahlee: Remove unneeded HAVE_ACPI_RESUME guardKyösti Mälkki
2019-02-11mb/google/kahlee: Use GPIO_10 for EC_SYNC_IRQEdward Hill
2019-01-25mb/google/kahlee/variants/aleena: Add support Synaptics touch padLucas Chen
2019-01-22Revert "UPSTREAM: mainboard/google/kahlee: Also configure GPIO_9 in RAM stage"Daniel Kurtz
2019-01-16mainboard/google/kahlee: Also configure GPIO_9 in RAM stageDaniel Kurtz
2019-01-16mb/google/kahlee/careena: Add 20ms delay to captureAkshu Agrawal
2019-01-16mb/google/kahlee/liara: Add 20ms delay to captureAkshu Agrawal
2018-12-18mb/google/kahlee/liara: Document why IOMMU is disabledJonathan Neuschäfer
2018-12-14google/grunt: Correct mismatch character hynix-H5AN8G6NAFR-UH.spd.hex SPD fil...Lucas Chen
2018-12-14google/grunt: Correct mismatch character hynix-H5ANAG6NAMR-UH.spd.hex SPD fil...Lucas Chen
2018-12-08google/grunt: Update micron-MT40A1G16KNR-075-E.spd.hex SPD file ModuleLucas Chen
2018-12-07google/grunt: Update hynix-H5AN8G6NAFR-UH.spd.hex SPD file Module PartLucas Chen
2018-12-07google/grunt: Update micron-MT40A512M16JY-083E-B.spd.hex SPD file ModuleLucas Chen
2018-12-05mainboard/google/kahlee: Add romstage GPIO initializationMartin Roth
2018-11-29google/kahlee/variants/aleena: Set STAPM values.Lucas Chen
2018-11-29google/grunt: Update hynix-H5ANAG6NAMR-UH.spd.hex SPD file Module Part NumberLucas Chen
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
2018-11-22grunt: Default SPK_PA_EN to LOWRaul E Rangel
2018-11-19mb/google/kahlee/variants/delan: Enable Weida touchscreen deviceIvy Jian
2018-11-13google/grunt: Update Samsung K4A8G165WC-BCTD SPD Module Part NumberKevin Chiu
2018-11-13google/grunt/aleena: Update H1/TP/TS i2c timingsLucas Chen
2018-11-09mb/google/kahlee/variants/liara: Decrease eDP adjust time to 20 msChris Wang
2018-11-09mb/google/kahlee: Tune eDP panel initialization timeChris Wang
2018-10-30mb/google/kahlee: Disable IOMMUMartin Roth
2018-10-24mb/google/kahlee: Enable 2T mode for liarachris wang
2018-10-19google/grunt: Remove unused MRC regions from FMAPRaul E Rangel
2018-10-11amd/stoneyridge: Indicate STAPM units in their nameRichard Spiegel
2018-10-11mainboard/google/kahlee: Set PSPP setting to BalanceLowAkshu Agrawal
2018-10-11mb/google/kahlee: Set stapm parameters with time value fixedAkshu Agrawal
2018-10-10mb/google/kahlee/variants/*/devicetree.cb: Reset I2C slavesRichard Spiegel
2018-10-10mb/google/kahlee: Add delan variantMartin Roth
2018-10-09mb/google/kahlee/variants/liara: Update H1/TP/TS i2c timingsChris Zhou
2018-10-08mainboard/google/kahlee: Set PSPP setting to BalancedHighAkshu Agrawal
2018-10-08Move compiler.h to commonlibNico Huber
2018-10-04mb/google/kahlee: Don't set stapm parametersMartin Roth
2018-10-04google/grunt: Correctly extract OEM string from CBFSKevin Chiu
2018-10-03mb/google/kahlee: Update careena Audio/TP i2c timingKevin Chiu
2018-10-03google/kahlee: Enable IOMMU deviceMarc Jones
2018-10-01google/kahlee: Run FCH PTS and WAK methodsMarshall Dawson
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
2018-09-25mainboard/google/kahlee: Only read a single vendor from oem.binMartin Roth
2018-09-25mb/google/kahlee/variants/liara: Disable NbP-state on LiaraAmanda Huang
2018-09-24soc/amd/stoneyridge/romstage.c: Move STAPM code to SOC specificRichard Spiegel
2018-09-21mainboard/google/kahlee: allow oem.bin file to update smbiosMartin Roth
2018-09-18mb/google/kahlee/variants/careena/devicetree.cb: Set STAPM valuesRichard Spiegel
2018-09-18mainboard/google/kahlee: Set EMMC reset pin to output lowMartin Roth
2018-09-18mainboard/google/kahlee: Don't set global subsystem IDsMartin Roth
2018-09-17mb/google/kahlee/variants/baseboard: Set STAPM percentageRichard Spiegel
2018-09-12mainboards: Add SMMSTORE region in chromeos configsPatrick Georgi
2018-09-09mainboard/google/kahlee: Reset trackpad & touchscreenMartin Roth
2018-09-05mainboard/google/kahlee: Enable the BCLK bufferMartin Roth
2018-09-02mainboard/google/kahlee/var/liara: Enable Synaptics touchpad deviceCrystal Lin
2018-08-31mb/google/kahlee/variants/liara: Update Audio/H1/TP i2c timingsChris Zhou
2018-08-28google/grunt: Reset BayHub EMMC freq to SD base CLK 50MHzKevin Chiu
2018-08-27mb/google/kahlee: Fix I2C bus 0 timing for GruntAkshu Agrawal
2018-08-17google/grunt: Update TP/TS/H1 i2c timingsKevin Chiu
2018-08-17mainboard/google/kahlee: Fix ACPI method Not Serialized errorMarc Jones
2018-08-16google/grunt/aleena: Update Raydium TS device ACPI nodesTim Chen
2018-08-15google/grunt: Remove BayHub EMMC driving strength overrideKevin Chiu
2018-08-13mb/google/kahlee: Remove unneeded blank linePaul Menzel
2018-08-09google/grunt: Override BayHub EMMC driving strengthKevin Chiu
2018-08-06mainboard/google/kahlee: Add PSPP override settingMarc Jones
2018-08-06mb/google/kahlee: Disable SATA in all boardsRichard Spiegel
2018-07-30mainboard/google/kahlee: Pad SPD serial Number with spacesMartin Roth
2018-07-28mainboard/google/kahlee: Fix Micron MT40A512M16LY-075:E POST CRC errorKevin Chiu
2018-07-25mb/google/x86-boards: Get rid of power button device in corebootFurquan Shaikh
2018-07-23mb/google/kahlee: Update i2c timingsMatt Wells
2018-07-20mainboard/google/kahlee: Create Liara variantMartin Roth
2018-07-20mainboard/google/kahlee: Create Aleena variantMartin Roth
2018-07-17mainboard/google/kahlee: Don't default backlight onMarc Jones
2018-07-17mainboard/google/kahlee: Enable backlight on resumeMarc Jones
2018-07-17mainboard/google/kahlee: Add mainboard resume functionMarc Jones
2018-07-16google/grunt: fix thermal zone CPU temperature reportKevin Chiu
2018-07-13mainboard/google/kahlee: Add more 3 SPD filesMartin Roth
2018-07-11mainboard/google/kahlee: Update existing SPD filesMartin Roth
2018-07-11mainboard/google/kahlee: Add additional SPDs for variantsMartin Roth
2018-07-06google/grunt: Update Raydium TS device ACPI nodesKevin Chiu
2018-06-15mainboard/google/kahlee: Enable keyboard backlight for careena specific SKUKevin Chiu
2018-06-11mainboard/google/kahlee: Remove unused baseboard codeMartin Roth
2018-06-11mainboard/google/kahlee: Remove Kahlee variantMartin Roth
2018-06-08mainboard/google/kahlee: Turn on backlight for all SKUsMartin Roth
2018-06-08src/mainboard/kahlee: Use common mainboard and romstage filesMartin Roth
2018-06-08mb/google/kahlee: Configure EC_PCH_WAKE_L as an SCI sourceDaniel Kurtz
2018-06-07mainboard/google/kahlee: Remove colon from filenamesMartin Roth
2018-06-03mb/google/kahlee: Remove #include <soc/smi.h>Richard Spiegel
2018-05-31mainboard/google/kahlee: Add careena variantMartin Roth
2018-05-30mainboard/google/kahlee: move grunt's chromeos.fmd to baseboardMartin Roth