aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/kahlee/variants/baseboard/gpio.c
AgeCommit message (Expand)Author
2021-02-03src: Remove unused <boardid.h>Elyes HAOUAS
2020-12-13mb/google/kahlee: move SMI/SCI GPIO setup to ramstageFelix Held
2020-06-30mb/google/kahlee: Do not enable SCI for H1_PCH_INT_ODLFurquan Shaikh
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-10mb/google/kahlee: Don't reset the touchpad/screen on bootMartin Roth
2020-05-02mainboard/google/kahlee: Add hook for early wlan rst gpio initKevin Chiu
2020-04-06mb/google/kahlee: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2019-12-19mb/{gizmosphere,google}: Remove unused <stdlib.h>Elyes HAOUAS
2019-02-11mb/google/kahlee: Use GPIO_10 for EC_SYNC_IRQEdward Hill
2019-01-22Revert "UPSTREAM: mainboard/google/kahlee: Also configure GPIO_9 in RAM stage"Daniel Kurtz
2019-01-16mainboard/google/kahlee: Also configure GPIO_9 in RAM stageDaniel Kurtz
2018-12-05mainboard/google/kahlee: Add romstage GPIO initializationMartin Roth
2018-11-22grunt: Default SPK_PA_EN to LOWRaul E Rangel
2018-11-09mb/google/kahlee: Tune eDP panel initialization timeChris Wang
2018-10-08Move compiler.h to commonlibNico Huber
2018-09-18mainboard/google/kahlee: Set EMMC reset pin to output lowMartin Roth
2018-09-09mainboard/google/kahlee: Reset trackpad & touchscreenMartin Roth
2018-09-05mainboard/google/kahlee: Enable the BCLK bufferMartin Roth
2018-07-17mainboard/google/kahlee: Don't default backlight onMarc Jones
2018-06-11mainboard/google/kahlee: Remove unused baseboard codeMartin Roth
2018-06-08mb/google/kahlee: Configure EC_PCH_WAKE_L as an SCI sourceDaniel Kurtz
2018-06-03mb/google/kahlee: Remove #include <soc/smi.h>Richard Spiegel
2018-05-27stoneyridge GPIO: Create and use PAD_INT for interrupt pinsRichard Spiegel
2018-05-25mb/google/kahlee: Init APU_BIOS_FLASH_WP_L GPIO to reset stageDaniel Kurtz
2018-04-26mainboard/google/kahlee: Enable EC wake on GPIO24Daniel Kurtz
2018-04-24mb/google/kahlee/variants/baseboard/gpio.c: move all non-critical gpiosRichard Spiegel
2018-04-24compiler.h: add __weak macroAaron Durbin
2018-04-20soc/amd/stoneyridge/include/soc/southbridge.c: Rename gpio structureRichard Spiegel
2018-03-21mainboard/google/kahlee: Update GPIOs based on board IDMartin Roth
2018-03-09mainboard/google/kahlee: Set GPIO 40 to inputMartin Roth
2018-02-22mb/google/kahlee: Use GPIO macros for baseboardJustin TerAvest
2018-02-22mb/google/kahlee: Correct bad gpio entryJustin TerAvest
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
2018-02-05mb/google/kahlee: Enable wlan card so it can be detectedMartin Roth
2018-01-30mb/google/kahlee: correct comments in baseboard gpio.cAaron Durbin
2018-01-23google/kahlee/variants/(kahlee/baseboard)/gpio.c: Convert GPIO tableRichard Spiegel
2018-01-23soc/amd/stoneyridge/southbridge.c: Create a GPIO programming functionRichard Spiegel
2018-01-13mainboard/google/kahlee: Fix GPIO tableMartin Roth
2017-12-14mainboard/google/kahlee: Update overcurrent pinsMartin Roth
2017-12-12soc/amd/common: Move Agesa related headersRichard Spiegel
2017-12-09mainboard/google/kahlee: Update GPIOsMartin Roth
2017-12-06google/kahlee: Set USB OC pinsMarc Jones
2017-12-02mainboard/google/kahlee: Add Baseboard GPIOsMartin Roth
2017-11-14mb/google/kahlee: Remove direct AGESA header includesMartin Roth
2017-11-13mb/google/kahlee: Add getter function for GPIO arrayMartin Roth
2017-11-13mb/google/kahlee: Remove mainboard.hMartin Roth
2017-11-13mainboard/google/kahlee: Add baseboard frameworkMartin Roth