summaryrefslogtreecommitdiff
path: root/src/mainboard/google/kahlee/bootblock
AgeCommit message (Collapse)Author
2018-06-08mainboard/google/kahlee: Use 66MHz SPI clock for fast readMartin Roth
Looking at the 100MHz signal, we were violating the timing requirements. 66MHz still isn't great, but it's a good tradeoff between improving the signal and losing boot speed time. This slows down the boot time by about 20mS. BUG=b:109583457 TEST=Boot grunt, look at signal on scope Change-Id: I7ce70c992822dd17c5877226e74c1890660768c6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-05-27stoneyridge GPIO: Create and use PAD_INT for interrupt pinsRichard Spiegel
The default interrupt control for GPIO pins within stoneyridge is for edge triggered, high. However, sometimes these need to change, or maybe the interrupt needs to be reported or delivered. This was the case of platform grunt, where the interrupt related bits were being changed afterwards. Ideally all the bits should be programmed through the same procedure. Create several PAD_INT definitions (for general configuration, for trigger configuration and for interrupt type configuration) and change function sb_program_gpios() to accept the output from PAD_INT_XX and program all the necessary bits while keeping compatibility with other PAD_XX definitions. BUG=b:72875858 TEST=Add code to report GPIO and interrupt configuration, build grunt and record a baseline. Add new code, rebuild grunt and record a test output. Compare baseline against test, there should be no change in GPIO or interrupt programming. Remove code that reports GPIO/interrupt configuration. Change-Id: I3457543bdf64ec757fd82df53c83fdc1d03c1f22 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-02google/kahlee: Set SPI 100 MHz and SPI Dual Read IO modeMarc Jones
Set SPI Fast Read to 100MHz and Dual Read IO mode to speed up the boot process by over a half second. Also, increase the Normal Read speed to 33MHz as supported by the W25Q128FW. BUG=b:70558952 TEST=Run cbmem -t to get boot times. Change-Id: I616a96526ed90bb4ab0c9c6b78787799faa02633 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/25970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-26mainboard/google/kahlee: Set SPI speed in bootblockMarc Jones
Set the SPI speed for Normal, Fast, AltIO, and TPM in bootblock. This setup is needed when moving AGESA out of the bootblock. It sets the SPI bus speed of the TPM access in verstage. BUG=b:70558952 TEST=Boot with AGESA moved out of the bootblock. Change-Id: Ida77d78eb1f290e46b57a46298400ed6c8015e2c Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/25756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-20soc/amd/stoneyridge/include/soc/southbridge.c: Rename gpio structureRichard Spiegel
The GPIO definition structure has evolved to a point where it's no longer specific to stoneyridge, though probably still specific to AMD. Therefore, rename the GPIO declaration structure removing stoneyridge from it. BUG=b:72875858 TEST=Build kahlee, grunt, gardenia. Change-Id: Ib034d3f7840c36ee8f5c5384241d7326d3fe5543 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25726 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11src/amd/stoneyridge: Fix a typo (EDGEL_TRIG -> EDGE_TRIG)Jonathan Neuschäfer
Fixes: 2269a3c328 ("soc/amd/stoneyridge: Add functions for GPIO interrupts") Change-Id: I5730259bc6819defc482d31644e1f476679257b2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25588 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-20mainboard/google/kahlee: Initialize EC earlier in the bootblockMartin Roth
Set up the EC communication a little earlier so we can read the board ID before programming GPIOS. BUG=b:73078053 TEST=Build & Boot grunt, board_id() now gets ID correctly Change-Id: Icf3f598824cfed69fa03ba2bb86503bb3c3699a5 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25286 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-01mb/{amd/gardenia,google/kahlee}: Initialize GPIOs earlierJustin TerAvest
The GPIOs for PCIe reset and power enable for WLAN must be set up before amdinitearly for wlan to function. BUG=b:73898539 TEST=Boot, see WLAN controller in lspci Change-Id: I568a3240a54817ab6dcf15fe39f7f1336943852b Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/24916 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-21mainboard/google/kahlee: Add tis_plat_irq_statusChris Ching
For variants that have a cr50 tpm, this enables faster polling when interacting with the tpm. BUG=b:72838769 BRANCH=none TEST=verified on grunt that irq is used and not timeouts for tpm Change-Id: I5786d334b6c1cc70f4c7107c75b07a7e27ac4428 Signed-off-by: Chris Ching <chingcodes@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
This makes the flow for GPIO initialization more closely follow that what is performed for other boards so that it's easier to read the flow (and stops relying on BS_WRITE_TABLES). BUG=b:72875858 TEST=Built and booted grunt, built gardenia. Change-Id: Ic97db96581a69798b193a6bdeb93644f6a74fc9d Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23679 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-09mainboard/google/kahlee: Update PCIe port mapMartin Roth
- Grunt moved the EMMC chip to port 2, where Kahlee had the SD reader on PCIe port 1, so move the OemCustomize file into the variant directory. - Add comments in baseboard version so it's easier to understand. - Update reset pins, put the definitions in gpio.h BUG=b:70255003 TEST=Build and boot Kahlee. Build Grunt. Change-Id: I78ec72e9d6fd52b8ac75e7187bd01ee7ddc3ba2a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-11-19mb/google/kahlee: Move ec.h into variant include directoriesMartin Roth
The mainboard directory is included through the PI makefile - most mainboard directories aren't in the include path at all. Move the ec.h file into the baseboard/variant directory that is already in the include path. BUG=b:69220826 TEST=Build Change-Id: I89d361b700c66ba576de724927574fdab9461fc6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-19mainboard/google/kahlee: Remove direct AGESA header includesMartin Roth
All AGESA headers should be included only through agesawrapper.h I missed this file in the Kahlee cleanup. BUG=b:66818758 TEST=Build gardenia; Build & boot kahlee Change-Id: Id9b303cb3cee8088fb5cca5257566c033d28c692 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04mainboard/google/kahlee: remove unused FILECODE macroAaron Durbin
From what I can tell FILECODE isn't used at all in this file. Remove it. Change-Id: Ie88140e63a4917f470f42119c1fe4e8c7d2584ca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-10-28mainboard/google/Kahlee: Combine BiosCallOuts filesMartin Roth
There's no need to have these separated. BUG=b:64932381 Test=Build & Boot Change-Id: I22898d3bf95d5e9a8fc2643bfccae1e2f5b29e44 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20Stoney Ridge Platforms: cast AGESA tables to void *Martin Roth
In the original AGESA headers, these tables are not defined as const. Cast them to void * so that they'll work with either version of the headers. BUG=b:64766233 TEST=Build in cros tree and upstream coreboot, with old headers and updated headers. Change-Id: I75387b57caf5a3c6c25655120aafd942254b5c73 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22059 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-20Stoney Ridge Platforms: Make AGESA callout tables commonMartin Roth
There was no reason to have the AGESA callout tables in each mainboard, so move them to soc/amd/common. Move chip specific functions into the stoneyridge directory: - agesa_fch_initreset - agesa_fch_initenv - agesa_ReadSpd Combine agesa_ReadSpd and agesa_ReadSpd_from_cbfs, and figure out which to use. Soldered-down memory still needs to be supported in a future commit, as stoney supports both DDR3 & DDR4. A bug has been filed for support for the upcoming Grunt platform. BUG=b:67209686 TEST=Build and boot on Kahlee Change-Id: Ife9bd90be9eb0ce0a7ce41d75cfef979b11e640b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-13google/kahlee: Add AGESA_DO_RESET in bootblockMarc Jones
Support the required AGESA_DO_RESET in bootblock. BUG=b:64719937 BRANCH=none TEST=Check AGESA reset request in booblock does a reset in the serial console or ec console. Change-Id: I462a1f81b8d209c15417946a314f2bfb9b226e4d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-02mainboard/amd: Add required callouts to Stoney BiosCallouts.cMartin Roth
Hook the new required AGESA callout functions into the callouts tables. BUG=b:66690176 TEST=Build and boot Kahlee - see the functions get called. Change-Id: Ife9c2b20e59ede404edb1f700238e425fea35914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-26binaryPI boards: Fix indirect AGESA.h includeKyösti Mälkki
Change-Id: I3f6030879da61168adf42db0a4913d70a737594e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-14stoneyridge: Rename hudson to southbridgeMarc Jones
Simplify funciton names and remove reference to hudson in stoneyridge. The southbridge in Stoney Ridge is Kern and hudson naming is no longer accurate. BUG=b:62200157 BRANCH=none TEST=Build and booted on Kahlee. Change-Id: Ide7a72dae69b881997101f1e37a1ac739901744d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20912 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31google/kahlee: Enable TPMMarc Jones
Set up the TPM decode to SPI prior to verstage. Enable LPC TPM and remove the mock data. Note, Kahlee TPM is on SPI, but decoded by the LPC block. BRANCH=none BUG=b:62103024 TEST=coreboot and Depthcharge reports TPM found. Change-Id: Iab92259ebeaa40937309fad05cc45d9ca6d41357 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Set DDI port 2 to DPMarshall Dawson
Set DDI port 2 type to Display Port. Change-Id: Idc5e57e01d4f0073ac50533c1b04a95bcae67473 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Setup the I2S audio codecMarshall Dawson
Inform AGESA to setup an I2S codec instead of an Azalia codec. This is step one for audio to work. ASL to connect the driver and the hardware is in a follow-on patch. Change-Id: I7ece5d8c317ddc76e0e6b2a005256bc384fe51e2 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/19841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-27google/kahlee: Pass GPIO setting in amdinitenvMarshall Dawson
GPIOs for I2C3 were being unset in amdinitmid if the GPIO enable table wasn't passed. It had been initialy set in amdinitreset. Pull the GPIO settings into their own file that can be used in bootblock and later stages. Change-Id: I41cd7873f8c8543c95ad8653e0a3887f7d0487a2 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Update PCIe link/lane configurationMarshall Dawson
Enable: GPP0 x1 - WLan GPP1 x1 - Card Reader Change-Id: Idbfc2a3260b85949810bdd8dc904e59f8a779e48 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Add ChromeOS and ChromeECMarshall Dawson
Add the basics for building as a ChromeOS device. ChromeOS and ChromeEC are dependent on each other, so bring them in together. The EC is a Nuvoton and you can find additional details in the Chromium EC repo. Add the Google HWID "Kahlee TEST 6421". The chromeos.fmd for Kahlee takes advantage of the AGESA located outside cbfs and includes typical RW, VPD, and MRC areas. There are some updates required to depthcharge, vboot, GPIOs, and the ChromeEC before we have a complete-ish system. Change-Id: Ifb0a6afc01dd80ef9e7bb81039d9152936043999 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Update GPIO tableMarshall Dawson
Update GPIO settings based on the schematic. Change-Id: Ic8a876198a3ba9029d1aabb273418923e40bfcc6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-27google/kahlee: Start Kahlee mainboardMarc Jones
Copied from amd/gardenia. Update the appropriate board name strings. Uses the soc/ structure. Change-Id: Ia68b16969518f4d63d5d2dea7658a472b2daca05 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 09:35:08 +0000