| Age | Commit message (Collapse) | Author |
|---|
|
Due to faffy has PL-2303 connect to USB2 port6(count from port0),
needs to enable it.
BUG=b:159760559
BRANCH=None
TEST=emerge-puff coreboot chromeos-bootimage
boot on puff board
Change-Id: Icc805757b043e7fac4d05188cbf2f9c9c56c2a2e
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
This change allows mainboard to configure different wakeup routes that
can be used by a GPIO key:
1. SCI: This is selected when SCI route is used to wake the system. It
results in _PRW property being exposed in ACPI tables.
2. GPIO IRQ: This is selected when GPIO controller wake is used to
wake the system. It is typically used when the input signal is not
dual routed and the GPIO controller block is not capable of applying
filters for IRQ and wake separately. In this case, _PRW is not exposed
in ACPI tables for the key device.
3. Disabled: No wakeup supported.
Based on these wakeup routes, gpio_keys_add_child_node() is updated to
expose _PRW and _DSD properties for wakeup appropriately.
Additionally, the change updates mainboards that were already using
gpio_keys to set wakeup_route attribute correctly and renames "wake"
to "wake_gpe" to make the usage clear.
BUG=b:159942427
Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This reverts commit 1408798637125f1707ded7215e22461c623a79a8.
Reason for revert: Causing backlight issues in device. Will reland after more debugging to figure out the root cause.
BUG=b:159370566
BRANCH=None
TEST=boot up device and make sure when kernel is booted, backlight comes up.
Change-Id: I643854c6c805d262539bbb482808e8c322059a49
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Currently, Reset Power Cycle Duration is set with default value (4s).
This adds around ~5 seconds of delay during power cycle or global reset.
So, this patch sets PchPmPwrCycDur (Reset Power Cycle Duration) to 1s
to minimize the delay.
Delay with Power Cycle or Global Reset:
Existing behaviour:
S0->S5 -> [ ~5 seconds delay ] -> S5->S0
With the patch:
S0->S5 -> [ ~2 seconds delay ] -> S5->S0
Also, correct the comment mentioned for PchPmSlpAMinAssert.
The value(3) defined for PchPmSlpAMinAssert triggers signal assertion width
to 98ms not 2s.
Test=Verified on Hatch and Puff boards
BUG=b:158634281
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I368c6716a92e06903a872f9e87ae0698eab95bdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42441
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the wyvern variant of the puff reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:158269582
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_WYVERN
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: Id7a090058d2926707495387f7e90b3b8ed83dac7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42551
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the faffy variant of the puff reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
V.2: Manually modified to keep Kconfig sorted.
BUG=b:157448038
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_FAFFY
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Change-Id: I5f14c2d6144ce3c2e48488ca81f31b3c04dc5fb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42717
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are two touch screen controllers on the Palkia device.
One is on the lid; another is on the base. To support
the different control path (for example: turning off the base's
touch event when we don't want to use it however still keeping
the lid's touch event), we use the different gpio pins to control
the second touch. As a result, we need to modify the devicetree
to adopt this change. With this change, we can control the
primary and secondary touch screen controller respectively.
BUG=b:149714955
TEST=lid/base touch screen works correctly
Change-Id: I1f896e334e51c78300af724cbef8d57641ae5612
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Here we consolidate some of the mainboard.c duplication between
Puff and it's variants.
Customizations can be done later via introducing a devicetree
parameterisation.
BUG=b:154071868
BRANCH=none
TEST=none
Change-Id: I75c2de7ae8efd544d800bc77e34e667c3afa4b01
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42672
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix Puff and its variants to not shutdown the AP before the cr50 reboot.
This is the same approach that Sarien do to remain on during a cr50
cycle.
BUG=b:154071064
BRANCH=none
TEST=none
Change-Id: I5f92b4f769654b67c10c91e4cc7b2bce785e302f
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42497
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Here we consolidate some of the dptf.asl duplication between
Puff and it's variants. Customizations can be done later
either as a direct copy or preferably via introducing a #define.
BUG=b:154071868
BRANCH=none
TEST=none
Change-Id: I35fa1e152adb5f04fb6ef1bd2448376cf9f37980
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
Here we consolidate some of the ec.h duplication between
Puff and it's variants.
BUG=b:154071868
BRANCH=none
TEST=none
Change-Id: I13dfe09da5c7a19677b156063bb51a58bc059b93
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
Kconfig 4.17 started using the $(..) syntax for environment variable
expansion while we want to keep expansion to the build system.
Older Kconfig versions (like ours) simply drop the escapes, not
changing the behavior.
While we could let Kconfig expand some of the variables, that only
splits the handling in two places, making debugging harder and
potentially messing with reproducible builds (e.g. when paths end up
in configs), so escape them all.
Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
|
|
Remove cannonlake dptf.asl include file from all the dsdt files
as per soc/intel/common/acpi code changes for dptf.
BUG=None
BRANCH=None
TEST=Build and boot on the system
Change-Id: I961a3ecb27e7bb7bb0b98c8630900bada0531639
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CHROMEOS_DSM_CALIB requires/selects CHROMEOS, so only select if
CHROMEOS already selected, otherwise building for non-ChromeOS
targets fails.
Test: build HELIOS for non-ChromeOS target (Tianocore payload)
Change-Id: Ic0fd3b0a0efbc5a1f6896eb379569a55cb0f67f8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update the following in dptf.asl
- Add support for TSR3
- Change TSR0/TSR1/TSR2/TSR3
From: Charger, 5V, GPU , None
To: Charger, GPU, F75303_GPU, F75303_GPU_POWER
- Adjust fan/cpu trip point accordingly
- Fix formating in dptf.asl
- Throttle charger when TSR0 (charger) is hot instead of throttle CPU
BUG=b:158676970
BRANCH=None
TEST=grep . /sys/class/thermal/thermal_zone5/{type,temp}
/sys/class/thermal/thermal_zone5/type:TSR3
/sys/class/thermal/thermal_zone5/temp:50800
Change-Id: Iedbb6bc7c1e59a027119c70791b9bc8a4d83ff87
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42270
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added device hid info to the MST and LSPCON devices on
kaisa, duffy and noibat.
BRANCH=None
BUG=b:156546414
TEST=None
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Change-Id: I7b54512cd88e7280374c188315cabc2fba197f69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Added device hid info to the MST and LSPCON devices.
BRANCH=None
BUG=b:156546414
TEST=Manual tested and able to see update on sysfs and ssdt table
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Change-Id: Iaef6c08f241ea671d1487a8524162dbb438b8e98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch adds correct PL2 baseline setting and PsysPL2 for different
SKUs. There is no way to identify the barral jack power rating, the
assumption is following that ships with the product:
1. i3/i5/i7: 90W BJ
2. Celeron/Pentium: 65W BJ
For Type-C adapter, we don't have Pcritcial (10ms) data, keeps the
original settings as 90% of adapter rating for PsyspL2/PL4 and PL2
as min(PL2, 0.9n) where n is adapter rating power.
BUG=b:143246320
TEST=Run with U62 and Celeron CPU and ensure the PL2 settings are correct
Change-Id: Ib16d4f65707801b430f06892ab45ecfa7551593f
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Switch USB2 port1 and port3 for noibat due to circuit change.
BUG=b:154585046,b:156429564
BRANCH=none
TEST=none
Change-Id: I711038624f3efe397be73c29a940b3e17802598f
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42296
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This port isn't packed on the board, so remove from
the devicetree.
BUG=b:154585046,b:156429564
BRANCH=none
TEST=none
Change-Id: Ib4aee337f67453adcebff7e93e25db7a838e3b2d
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42269
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BRANCH=none
BUG=b:158713330
TEST=Flashing the LSPCON firmware works
Change-Id: Ib371f6954115145047c70cfd25262026cce087fd
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Selecting VBOOT_LID_SWITCH under BOARD_GOOGLE_BASEBOARD_HATCH creates a
requirement for VBOOT, and prevents building in the non-vboot/non-ChromeOS
case. As this symbol is already selected by CHROMEOS below, there's no need
for the baseboard (and only one of the two) to select it, so don't.
Change-Id: I060e82185997bce451648173dd97dd6a3d5d237f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch adds correct PL2 baseline setting and PsysPL2 for different
SKUs. There is no way to identify the barral jack power rating, the
assumption is following that ships with the product:
1. i3/i5/i7: 90W BJ
2. Celeron/Pentium: 65W BJ
For Type-C adapter, we don't have Pcritcial (10ms) data, keeps the
original settings as 90% of adapter rating for PsyspL2/PL4 and PL2
as min(PL2, 0.9n) where n is adapter rating power.
BUG=b:143246320
TEST=Run with U62 and Celeron CPU and ensure the PL2 settings are correct
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: If7de614d58366158a566563990ee1ecc8c0110bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
This patch enables enables the CSE Lite SKU for all the
puff variant boards.
BUG=b:143229683
TEST=Build and boot puff with CSE Lite SKU.
Cq-Depend: chrome-internal:3046770
Change-Id: I0de6bca162b01870ca554ae97bc4a41cf66fef18
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch modified the puff fmd files to support CSE Lite SKU.
* Reduce the SI_ALL size to 3MiB since ME binary size is less
than 2.5MiB.
* Increase the FW_MAIN_A/B size to accommodate the ME_RW update
binary with CSE Lite SKU.
BUG=b:154561163
TEST=Build and boot puff with CSE Lite SKU.
Cq-Depend: chrome-internal:3046770
Change-Id: I4d39a1bdeabf48fc740da67539f48a9ff72c442c
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41198
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I54eda3d51ecda77309841e598f06eb9cea3babc1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
A verbatim copy of variants/puff.
BUG=b:156429564
BRANCH=none
TEST=none
Change-Id: I8c76d468177e1f3fcab53e0790599041b1a944d8
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41851
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects the fmd files based on config
BOARD_GOOGLE_BASEBOARD_PUFF and also renames the files
to align with basebaord name and layout size.
BUG=b:154561163
TEST=Built puff and verified that it selects the right fmd file.
Change-Id: Ice6196ca778c6c118ce89e1510a445339a5c3455
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch selects the fmd files based on config
BOARD_GOOGLE_BASEBOARD_HATCH and also renames them to
add the baseboard name and layout size tags.
BUG=b:154561163
TEST=Built hatch variants and verified that they select the
right fmd files.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I5d99ae28cc972ffa635adf100b756c36e168a8f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All hatch and puff variants use 16MiB SPI flash except the legacy ones
which used 32MiB flash. Kconfig.name is updated to select
BOARD_ROMSIZE_KB_32768 only for the legacy variants and
BOARD_GOOGLE_HATCH_COMMON selects BOARD_ROMSIZE_KB_16384 by default if
BOARD_ROMSIZE_KB_32768 is not selected.
TEST=Verified using abuild --timeless that all hatch variants generate
the same coreboot.rom image with and without this change.
Change-Id: I708506182966936ea38562db8b0325470e34c908
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41662
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VBOOT_EC_EFS is for EFS1 and EFS1 is deprecated. Puff uses EFS2
and its variants should follow.
BUG=b:157372086
BRANCH=none
TEST=emerge-puff coreboot
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I581f137b506a96df45e5bed21833856bb4f6aaa3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Change-Id: I6c69dcad82ee217ed4760dea1792dd1a6612cd8b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This change drops rt8168 ethernet Kconfig options for baseboard hatch
since it does not really support an ethernet device.
Change-Id: I7c19dbeb2f64b0643b082a9c588f8b14db4dfb8a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41661
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
mb/google/hatch supports two different reference platforms - Hatch and
Puff. This change adds Kconfigs BOARD_GOOGLE_BASEBOARD_PUFF in
addition to BOARD_GOOGLE_BASEBOARD_HATCH to better organize the
Kconfig selections and reduce redundancy. In addition to this, a new
config BOARD_GOOGLE_HATCH_COMMON is added that selects all the common
configs for both baseboards.
TEST=Verified using abuild --timeless option that all hatch variants
generate the same coreboot.rom image with and without this change.
Change-Id: I46f8b2ed924c10228fa55e5168bf4fe6b41ec36c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41660
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables max98390 audio codec on nightfury.
BUG=b:149443429
BRANCH=firmware-hatch-12672.B
TEST=Built and checked audio function on nightfury
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Ic9678583370cf5e41c87e35ba12f86572708fada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:147249494,b:147249494
BRANCH=None
TEST=boot up mushu
check cbmem -1 to make sure PCIe 1d.4 is enabled
Change-Id: I36404217f0ecffb0cce1105e76f507c9062df053
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update processor power limit configuration parameters based on
common code base support for Intel Cannonlake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on drallion system
Change-Id: Iac6e6f81343fcd769619e9d7ac339430966834f6
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some existing devicetrees were manually adapted to anticipate
root-port switching. Now, their PCI-device on/off settings should
just reflect the `PcieRpEnable` state and configuration happens
on the PCI function that was assigned at reset.
Change-Id: I4d76f38c222b74053c6a2f80b492d4660ab4db6d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Originally variants make use of a 32MB chip whereas now they
use a 16MB SPI flash. Allow for the coordination of dealing
with the transition between phases.
V.2: Leave Puff alone at the moment due to the complexity of
coordination.
BUG=b:153682192
BRANCH=none
TEST=none
Change-Id: Ic336168ea1a0055c30f718f5540209d2cf69d029
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40897
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The change applies the DPTF parameters received from thermal team.
1. Set PL1 Max to 25W
2. Set PL2 Max to 44W
3. Update Temp sensor parameters
BUG=b:152011093
BRANCH=none
TEST=build and verified by thermal team
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I225897832b02f9de6221053b68fbdba30f8b199a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41165
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a SPI rom region RW_SPD_CACHE on Puff and it can be used
on spd_cache to reduce reading SPD data from SODIMM by smbus. It's for
saving the boot time and it can be used to trigger MRC retraining when
memory DIMM is changed.
BUG=b:146457985
BRANCH=None
TEST=Build puff successfully and verified below two items.
1. To change memory DIMM can trigger retraining.
2. one DIMM save the boot time : 158ms
two DIMM save the boot time : 265ms
Change-Id: I8d07fddf113a767d62394cb31e33b56f22f74351
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Used commands:
perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves all ACPI table support in coreboot currently living
under arch/x86 into common code to make it architecture
independent. ACPI table generation is not really tied to any
architecture and hence it makes sense to move this to its own
directory.
In order to make it easier to review, this change is being split into
multiple CLs. This is change 3/5 which basically is generated by
running the following command:
$ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g'
BUG=b:155428745
Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This patch adds psys_pmax calculation. There are two types of power
sources. One is barrel jack and the other is USB TYPE-C. The voltage
level is fixed for a barrel jack while TYPE-C may vary depending
on power ratings. We need to get voltage information from
EC and calculate correct psys_pmax value. The psys_pmax needs to be
set before FSP-S since FSP-S will handle the setting passing to pcode,
so move the routine ahead to variant_ramstage_init.
BUG=b:151972149
TEST=emerge-puff coreboot chromeos-bootimage
check firmware log and ensure psys_pmax is passed to FSP
check the data from dump_intel_rapl_consumption in the OS and
ensure the power data is close to an external power meter.
Change-Id: Iff767d4b44a01e766258345545438a54a16d1af5
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Update DPTF settings for smooth fan speed control.
BRANCH=firmware-hatch-12672.B
BUG=b:154074920
TEST=Built and test on Helios system
Change-Id: I3f4d9fd9e17541dd5fb7982a8b43a039c41cba87
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update usb2 port strength parameter for usb2_port[0] to improve SI.
BUG=b:154668734
BRANCH=firmware-hatch-12672.B
TEST=Built and checked SI margin of USB2 ports
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I8b4b58a67dc0835a677770a2968e8d8d61e0374f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Based on USB SI report to fine tune the strength for USB2 port0.
BRANCH=none
BUG=b:153590143
TEST=build and test USB2 port0 function works fine.
Change-Id: I070c9e1c8153a680fb8f827889738a764d7ea9f4
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Since `commit 0ee9b14c09c` the SPD array is set to NULL if no
DIMM is present. This causes failure due to an unconditional use
of `blk.spd_array[i]`, : i={0,1}.
This validates the spd_array is non-NULL before use otherwise it
sets the DIMM as not present.
Puff fails boot with the following log:
```
...
SPD: banks 16, ranks 2, rows 16, columns 10, density 8192 Mb
SPD: device width 8 bits, bus width 64 bits
SPD: module size is 16384 MB (per channel)
ASSERTION ERROR: file 'src/soc/intel/cannonlake/cnl_memcfg_init.c', line 47
```
BUG=b:155220125
BRANCH=none
TEST=none
Change-Id: I5f47c849344951d53fa8c67e779b7c46d632d124
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40820
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The change applies the DPTF parameters received from the thermal team.
1. Set PL1 Min to 3W
2. Set sample period of TCPU/TSR0/TSR1 to 30 Sec
3. Enable EC_ENABLE_MULTIPLE_DPTF_PROFILES and add trigger points
for tablet mode.
4. Update trigger points of CPU/TSR0/TSR1
BUG=b:154564062, b:154290855
BRANCH=hatch
TEST=build and verified by thermal team.
Change-Id: I87170e63de222487a3bda1217c4ee87a2ec1984f
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Tuning i2c frequency for jinlon:
I2C0: 392.7 KHz
I2C1: 390 KHz
I2C3: unused
I2C4: 388.8 KHz
BUG=b:154900217
BRANCH=hatch
TEST=emerge-hatch coreboot chromeos-bootimage, and measured with
scope
Change-Id: I9b186193f34027d03dd349cf1e29bb266b167383
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
1) Allows MKBP events from the EC to wake the system from suspend states.
2) Remove EC_HOST_EVENT_MKBP from the EC_SCI_EVENTS mask, so that MKBP
events don't generate an SCI. The EC is also being changed to use host
events to wake up the system, and use the EC_INT_L line for MKBP IRQ
signalling. Otherwise, there would be two IRQs generated for MKBP events.
BUG=b:148976961
BRANCH=firmware-hatch-12672.B
TEST=Verify MKBP events wake system
TEST=Verify MKBP IRQs are run
Change-Id: I8420a996cb1975007cbbbefe9e2f8f1fca91b666
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
BUG=b:154071868
BRANCH=none
TEST=builds
Change-Id: I9c602476a80a97438af01e3c48fac385532373a4
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Copy over DPTF parameters from Puff.
BUG=b:153589525
BRANCH=none
TEST=none
Change-Id: Ic619826205be06f30055fbbc537f3d302dd039bd
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40423
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Copy over DPTF parameters from Puff.
BUG=b:153589525
BRANCH=none
TEST=none
Change-Id: I7270db1283a9c0ee4746da038020e432aeb6dc5e
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40422
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch USB2 port1 and port3 for duffy and kaisa due to circuit change.
BUG=b:153682207, b:154451230, b:154445635
BRANCH=None
TEST=emerge-puff coreboot chromeos-bootimage
boot on puff board
Change-Id: I9c0cbcbefd045085fb70cf4f41869ab9b98103c4
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Romstage is now where software sync is performed for chromebooks.
EFS2 has been ported to romstage from Depthcharge. Puff should
follow.
This patch enables CONFIG_EARLY_EC_SYNC and disables
CONFIG_VBOOT_EC_EFS. EFS2 will be done in romstage.
BUG=b:147298634, chromium:1045217
BRANCH=none
TEST=Verify software sync succeeds on Puff.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I8d7c25f8281496c7adb282f5d4e0fc192d746e3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40390
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
USB routing has changed on reference schematics after Puff rev1 has
built. This may confuse people trying to c&p devicetree from the Puff.
So add comment to clearly note that there was change, hopefully
preventing c&p errors.
BUG=b:153682207
BRANCH=None
TEST=None
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I5c43a5c04c81b6708c9eeabc48ef11961d7c8561
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40546
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Each physical port should have the same group and position for both USB2
and USB3, but puff and its variants use different layout than the
baseboard so they must override PLD.
Ports are split into two groups for front and back, with positions in
each group numbered from left to right.
BUG=b:151579409
BRANCH=none
TEST=PLD_GroupToken and PLD_GroupPosition are set as expected in SSDT.
Change-Id: Ibe19e4faa1fbc7117687d789e9bd5584852a48c0
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There have been two cases of incompatibilities between overlapping
changes, and they need to be resolved in a single commit to unbreak the
tree:
1. CB:40389 introduced a new use of write_secdata while CB:40359 removed
that function in favor of safe_write.
Follow the refactor of the latter in the code introduced by the former.
2. CB:39849 changed google_chromeec_get_usb_pd_power_info()'s interface
and adapted all its users. Except for duffy and kaisa which were only
added in CB:40223 and CB:40393 respectively, so reapply the patch to
puff's mainboard.c to their mainboard.c files.
Change-Id: Ib8dfcd61bb79e0a487eaa60e719bd93561f2d97a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds psys_pmax calculation. There are two types of power
sources. One is barrel jack and the other is USB TYPE-C. The voltage
level is fixed for a barrel jack while TYPE-C may vary depending
on power ratings. We need to get voltage information from
EC and calculate correct psys_pmax value. The psys_pmax needs to be
set before FSP-S since FSP-S will handle the setting passing to pcode,
so move the routine ahead to variant_ramstage_init.
BUG=b:151972149
TEST=emerge-puff coreboot chromeos-bootimage
check firmware log and ensure psys_pmax is passed to FSP
check the data from dump_intel_rapl_consumption in the OS and
ensure the power data is close to an external power meter.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: I8ea01f856411e05a533489280fc2b4a46a1440c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
This patch adds voltage and curent parameters in
google_chromeec_get_usb_pd_power_info and remove power parameter. Caller could
use the voltage and current information to calculate charger power rating.
The reason for this change is, some applications need the voltage information
to calculate correct system power eg PsysPmax.
BUG=b:151972149
TEST=emerge-puff coreboot; emerge-fizz coreboot
Change-Id: I11efe6f45f2f929fcb2763d192268e677d7426cb
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Override VBT to fix CRC error issue with psr2 panel for kled.
Cq-Depend: chrome-internal:2877637
BUG=b:145963505
BRANCH=hatch
TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-bootimage
Change-Id: If201d449e910f80dc514c142aec4808a44fa31a9
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Modify DPTF parameters for OEM EVT build from thermal team.
BUG=b:153589525
BRANCH=None
TEST=emerge-puff coreboot chromeos-bootimage and boot on puff board
Change-Id: I36db172e4d2ccc854856641c510cff9fe04ea235
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
A verbatim copy of variants/puff
V.2: rebased on duffy.
BUG=b:152951180
BRANCH=none
TEST=none
Change-Id: I7ea28e96c8b6867e17097a8bfab848928195654d
Signed-off-by: Andrew McRae <amcrae@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
A verbatim copy of variants/puff.
BUG=b:152951181
BRANCH=none
TEST=none
Change-Id: I9ac262bba60a8d0059722e947ed1b47dddb94f55
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40223
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:152927525
BRANCH=none
TEST=builds
Change-Id: I691377624c870eb0fc6f7e84a4b9cd50b7b09654
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
Tunes the headphone amp i2c with measured signal shape.
BUG=b:147192377
BRANCH=none
TEST=builds and measured i2c frequency below 400khz
Change-Id: I60f73bcf60ed140f595c953be371b982a63f7b95
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update tdp_pl1_override value to 15W for CML-U based nightfury platform.
BUG=None
BRANCH=firmware-hatch-12672.B
TEST=Built
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Ib0155b961b9d304bed2e9456c4964ebd598af4dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I38d429245810f64a03253b5076391af843f8d0de
Fixes: e2ac5b7a36 ("mb/google/hatch/variants: Add DPTF based Fan control")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When EC_GOOGLE_CHROMEEC_SKUID is selected provide an
implementation of smbios_mainboard_manufacturer() so the code
doesn't need to be duplicated in the mainboards.
BUG=b:153767369
Change-Id: Ib65fe373a79d606cffcba71882b0db61be5a18c3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In some cases Hatch variants are not laptop form-factors such
as Puff. Ensure that the base configuration does not assume
the form factor and allow variants to elect their intended
use-case.
Note that the issue is that early ec sync needs to be
disabled for EFS2 to function correctly, see commit 6daa8c3ba5f
from the FIXME line. The relationship is that desktops do not
have a battery.
BUG=b:152951181
BRANCH=none
TEST=none
Change-Id: I15dc9efa51e9d61297868df287879dfb62909e33
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40252
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apply initial DPTF parameters for nightfury from internal thermal team. Will update after further thermal/performance tuning.
BUG=b:149226871
BRANCH=firmware-hatch-12672.B
TEST=built and verified FAN worked by DPTF active policy
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I712bdd8edc999ef7ee33f4adf21893be12e86bec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: If85e246550abe323d6a2a7c6301e8e91858cbe3a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
These two identifiers were always very confusing. We're not filling and
injecting generators. We are filling SSDTs and injecting into the DSDT.
So drop the `_generator` suffix. Hopefully, this also makes ACPI look a
little less scary.
Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: David Guckian
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add an enable reset delay to avoid messages like this in the
kernel:
i2c_hid i2c-WCOM50C1:00: failed to change power setting.
This gets rid of all the warnings except one on reboot/shutdown.
That last case likely isn't fixed because the sleep command is
being sent directly from i2c_hid_shutdown(), so no ACPI routines
get to run and provide the delay. Since the machine is going down
for shutdown/reboot anyway, fixing that last case is a lower
priority.
BUG=b:145094539
TEST=Run on kohaku, switch to guest mode and log out, no errors
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: I8fadf497dd09e5b95b1d74443fb0543d3555dbb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable wifi sar feature and set wifi sar name for kled sku.
BUG=b:152277272
TEST=emerge-hatch coreboot chromeos-bootimage and
verify wifi SAR load by sku-id
Change-Id: I9ee242773fd05cc2bcd7bde07da8176022827677
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Create the sushi variant of the hatch reference
board by copying the template files to a new directory named
for the variant.
(Auto-Generated by create_coreboot_variant.sh version 3.0.0).
BUG=None
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_SUSHI
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: Ie900d09ff55e695527eafe68a5a75cd4a0b6d340
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Icda241cfac7b428176515d7996a48cb01b1dc976
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39815
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The format for VPD has changed s.t. the first NIC should
always have a zero concat to the end.
Adjust all the respective boards to shift back by one and
adjust drivers/net friends to remove the 'special casing'
of idx == 0.
Background:
https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn
V.2: Fixup a code comment typo while we are here.
V.3: Vary special casing semantics for idx==0 => default mac addr is set.
V.4: Rework to still support the legacy path.
BUG=b:152157720
BRANCH=none
TEST=none
Change-Id: Idf83cc621a9333186dabb668b22c4b78e211930a
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The format for VPD has changed s.t. the first NIC should
always have a zero concat to the end. drivers/net supports
this with the workaround of setting the idx to 1.
The longer term fix is to adjust all the respective boards
to shift back by one and adjust drivers/net friends to
remove the 'special casing' of idx == 0.
Background:
https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn
BUG=b:152157720
BRANCH=none
TEST=none
Change-Id: I510428c555b92398a5199b346dffb85d38495d74
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add HID field in max98357a_config and allow mainboards to set it.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating devicetree to enable ELAN touchpad and ELAN touchscreen on nightfury
BUG=none
BRANCH=firmware-hatch-12672.B
TEST=built and verified touchpad and touchscreen worked
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Change-Id: Ieba6558ce3897ce2f95f51ed667465d84b4ab189
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I09cc279b1f75952bb397de2c3f2b299255163685
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Add Palkia as a variant of Hatch.
BUG=b:150254194
BRANCH=none
TEST=none
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I6a303d9fc2be9ea358ad66cd648738187c974193
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38860
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Early ec sync needs to be disabled for EFS2 to function.
BUG=b:151115320
BRANCH=none
TEST=none
Change-Id: I384d072d9614a5cd30837f7cdfb777ad5e4f6b19
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create new variant and build for nightfury.
BUG=b:149226871
TEST=FW_NAME="nightfury" emerge-hatch coreboot chromeos-bootimage
Change-Id: If08692f4a2d216c57499098cc0e35abd708d99d4
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Add LPDDR3 4GB 2133MHz SPD file.
BUG=b:149226871
TEST=Build and check cbfs has the spd.bin
Change-Id: I1598774a87eecc76082286540beadaa3c26eda69
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39271
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Philip Chen <philipchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is required to transmit button information from EC to kernel.
BUG=b:150830342
BRANCH=None
TEST=firmware_ECPowerButton test passes on puff
Change-Id: I10ba9d55e8997ce2412deb0613cfcaa8f24f271d
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
wpsw_boot is deprecated in favour of wpsw_cur. As such,
coreboot no longer needs to share "write protect" GPIO
with depthcharge.
BUG=b:124141368, chromium:950273
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I2fcb7f82aa063fd72928171af5cbef0356ba620c
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:2088434
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39318
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the ChromeOS EC uses EC early firmware selection (EFS), the AP vboot
build must also enable EC EFS. Puff EC uses EFS, so enable it in the AP
vboot build.
BUG=b:150742950
TEST=Puff can boot with EC EFS with hardware write protect enabled
BRANCH=none
Signed-off-by: Sam McNally <sammc@chromium.org>
Change-Id: I0877000b7d277106436831f2d69775c25299da9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Internalise smbios_system_sku() strong symbol inwards in the ec_skuid.c
implementation and simply wrap a call to:
google_chromeec_smbios_system_sku().
BUG=b:150735116
BRANCH=none
TEST=none
Change-Id: I05ebfc8126c0fb176ca52c307c658f50611ab6ab
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39146
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:149775711
BRANCH=firmware-hatch-12672.B
TEST=emerge-hatch coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Change-Id: I856d7b361e70b657966cd4036c79f2fedfabb766
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39126
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable EPS on the SKUs that do not have it.
Change-Id: I7305097beea3484634933ab856fd084933868a10
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Enable the GFX device for Jinlon.
Change-Id: I6ba90bf464e315ec364b6f35e7670924a2aba25a
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Leverage in Puff to avoid diskswap variants. Later this could become
part of the baseboard definition and hatch diskswap variants migrated
over to use it as well.
BUG=b:149171631
BRANCH=none
TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and
run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration
on Puff.
Change-Id: Ie87f0823f28457db397d495d9f1629d85cfd5215
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Leverage the common sku id space helper encoders.
BUG=b:149348474
BRANCH=none
TEST=tested on hatch
Change-Id: I96e10010fd375b127f1e10387d6f7a839bc35fdd
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39019
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure GPP_E0 as output for view angle management
Change-Id: Iad640eed855b47e365da55fa994c6a3c4c38caf9
Signed-off-by: Rajat Jain <rajatja@google.com>.
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I8c721c7ccba4f87d4acb9dae74213a46151fe2ed
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
