aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch
AgeCommit message (Collapse)Author
2019-02-07mb/google/{hatch,sarien}: Configure GPIOs using cnl_configure_padsFurquan Shaikh
This change uses cnl_configure_pads to configure GPIOs in ramstage so that cannonlake SoC code can re-configure the GPIOs after FSP-S is run. This is just adding a workaround until FSP-S is fixed. BUG=b:123721147 BRANCH=None TEST=Verified that there are no TPM IRQ timeouts in boot log on hatch. Change-Id: I9973c6c49154f1225f0ac34a3240a0d19f911f18 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/31251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-02-07soc/intel/cannonlake: Add Whiskeylake SoC kconfigSubrata Banik
This patch performs below tasks 1. Create SOC_INTEL_COMMON_CANNONLAKE_BASE kconfig. 2. Allow required SoC to select this kconfig to extend CANNONLAKE SoC support and add incremental changes. 3. Select correct SoC support for hatch, sarien, cflrvps and whlrvp. * Hatch is WHL SoC based board * Sarien is WHL SoC based board * CFLRVP U/8/11 are CFL SoC based board * WHLRVP is based on WHL SoC 4. Add correct FSP blobs path for WHL SoC based designs. Change-Id: I66b63361841f5a16615ddce4225c4f6182eabdb3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-06mb/google/hatch: Configure I2C busesFurquan Shaikh
This change enables I2C bus 2, 3 and 4 in devicetree and configures GPIO pads for the same. It also configures pads for I2C5 as no-connect. BUG=b:123711244 TEST=Verified that i2c shows up in "i2cdetect -l" after booting to OS. Change-Id: Ib4714a670d73228332115415e4393f82802c6475 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/31237 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-05mb/google/hatch: Add keyboard backlight supportIvy Jian
This change adds keyboard backlight feature for Hatch platform. BUG=b:122799544 BRANCH=none TEST=keyboard backlight works when EC reports correct info. Change-Id: I29273122f061e0e442f6629351ef3670535c0507 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31175 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-05mb/google/hatch: Add USB port capability ACPI support for USB2 port10Aamir Bohra
This implementation adds support to create ACPI package for USB port capability (_UPC) and physical location of device (_PLD) for USB2 port 10. BUG:b:123375275 TEST:Verify _UPC and _PLD ACPI packages gets published for USB2 Port 10 in SSDT and BT is functional in discrete and integrated mode. Change-Id: Ifeab24505a700e8e4677be20074c7d0400769cec Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/31197 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-04soc/intel/cannonlake: Remove SOC_INTEL_CANNONLAKE_MEMCFG_INIT KconfigSubrata Banik
This patch removes duplicate selects of same SOC_INTEL_CANNONLAKE_MEMCFG_INIT from various CFL/WHL SoC based boards to include cnl_memcfg_init.c file and include the cnl_memcfg_init.c file by default in CNL SoC Makefile.inc. Change-Id: Ib21ea305871dc859e7db0720c18a9479100346c3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-01mb/google/hatch: Enable S0ixShelley Chen
BUG=b:123540469 BRANCH=None TEST=None Change-Id: I713e6ad70efdd152895afa45aee44a5b53a8136b Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31157 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30mb/google/hatch: Enable AP Wake from ECShelley Chen
Initialize EC_PCH_WAKE_ODL GPIO to make sure that ec events will wake the AP from suspend. Also create a task to initialize the hostevent wake mask properly. BUG=b:123325238,b:123325720 BRANCH=None TEST=from AP console: powerd_dbus_suspend from EC console: hostevent (make sure wake mask set) from EC console: gpioset PCH_WAKE_L 0 Make sure device wakes up Also, checked to make sure keyboard press wakes up device from S3. Change-Id: I53d5291a6b9ab9a21e89ccd21f172180ce473bd5 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24mb/google/hatch: Enable support for WWANMaulik V Vaghela
This patch enables relevant GPIOs to enable WWAN. WWAN also requires to enable USB 2 port 6 and USB3 port 5 which is already enabled in device tree related changes. BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I1559bbc6168aec1a369bf3291d2c1e2f9a2fbe07 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24mb/google/hatch: Enable PCIe WLAN and BTMaulik V Vaghela
Enable PCIe WLAN for hatch 1. Enable PCI port 14 for PCIe WLAN 2. Enable CLKREQ, CLK SRC 3 for PCI port 14 3. GPIO pad config for WLAN and BT USB port for BT has already been enabled so not included in this patch BUG=b:120914069 BRANCH=none TEST=check if code compiles correctly and verify GPIO configuration with schematics Change-Id: I4f2a6eb37a467ad8b8cdde8fe6b657fabb383b04 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-23mb/google/hatch: Enable SD card support for hatchMaulik V Vaghela
Enable support for SD card support for hatch 1. Enable PCI device for SD and also configure SD detect GPIO 2. Configure SD card related GPIOs in gpio.c BUG=b:120914069 BRANCH=none TEST=Verify GPIO configuration with schematics Change-Id: I8ccaa28323b1e1fcc192e245347a96309227660b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-22mb/google/hatch: Remove MAINBOARD_USES_IFD_EC_REGION selectionSubrata Banik
hatch shouldn't make use of internal ec.bin through IFD tool. Change-Id: Ib1a324291b1c8ac90a7d790b63427b2e85c74fd1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-17mb/google/hatch: Configure miscellaneous featuresRonak Kanabar
set SaGv = SaGv_Enabled , To Enable System Agent dynamic frequency support set HeciEnabled = 1, To Enable heci communication set speed_shift_enable = 1 To Enable Speed Shift Technology support Change-Id: Iea90a65a77ef5e45a802cfe6fd31e1921163b02b Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/30774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-17hatch: Add sbmios_mainboard_sku functionShelley Chen
BUG=b:122578255 BRANCH=None TEST=mosys platform id/name/family Change-Id: I6288ea1a4e9f692b6e04440e61f59ea53f01ebec Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-17hatch: disable sw syncShelley Chen
Disabling software sync since EC patches haven't landed yet. BUG=b:120914069 BRANCH=None TEST=build bios image and make sure gbb flag 0x200 is set Change-Id: I1661bcd6ebbee6d9aa8068efcc18b259fb4c8203 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-14mb/google/hatch: Use USB2 Port 10 for BT over CnViAamir Bohra
Integrated BT controller in CnVi uses USB port 10 for communication. BUG=b:122552619 TEST=lsusb shows BT device Change-Id: Iad1ca0e9419b534f50a3ce3fdcbd660caf8efb5c Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30809 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
After f5ca922 (Untangle CBFS microcode updates) got merged, all mainboard using intel apollolake, cannonlake, coffeelake, glk, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. BUG=N/A TEST=Build and test on Sarien platform, by default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port 2. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I550a00144cff21420537bb161c64e7a132c5d2de Reviewed-on: https://review.coreboot.org/c/30853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-10sb/intel/common: Show "Add EC firmware" only for boards that need itJan Tatje
Most boards currently do not use EC firmware from SPI flash in the IFD, this hides this option by default and shows it only for boards that need it. A new config variable MAINBOARD_USES_IFD_EC_REGION is introduced to enable this option for boards that need it. The following list of boards requiring this was provided by Lijian Zhao: 1. intel/cannonlake_rvp 2. intel/coffeelake_rvp 3. intel/icelake_rvp 4. google/sarien 5. google/hatch Change-Id: I52ab977319d99a23a5e982cc01479fe801e172a7 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10mb/google/hatch: enable CPU cluster deviceAamir Bohra
Change-Id: I28c67fbdf2b4f371c4b533b64cad2c4376ca2bd2 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30785 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-09mb/google/hatch: Disable the SA IPU for hatchV Sowmya
This patch disables the SA IPU for hatch since it is not using the IPU. Change-Id: Ib2afc4cc4fd7ef98365b0b98130b0e8bc757ac2a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-07mb/google/hatch: Enable touch panel supportMaulik V Vaghela
Following changes are done to enable touch screen support on hatch 1. Enable I2C1 device at 400Khz at 3.3V 2. Configure GPIO for touch screen 3. Add ACPI entry for ELAN touch panel 4. update GPIO table with not connected GPIO pins for panel BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I8dab07dad4cb197865bb9cf0e8da240810fcfabe Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-03mb/google/hatch: Make WP_RO range align with winbond specificationSubrata Banik
This patch ensures to make memory protected range between 01C00000h - 01FFFFFFh as per winbond spi datasheet https://www.winbond.com/resource-files/w25q256jv%20spi%20revb%2009202016.pdf section 7.1.15 BUG=none BRANCH=none TEST=build for hatch. Change-Id: I52d8dbba14bd060b48a7fe8ee009219413ef89ca Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30552 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-01mb/google/hatch: Enable CNVi Wifi for hatchMaulik V Vaghela
This patch enables CNVi wifi for hatch 1. Enable CNVi device in device tree 2. Configure GPIO pad config for CNVi BUG=b:120914069 BRANCH=none TEST=check if code compiles correctly and verify GPIO configuration with schematics Change-Id: I0c5542737d3a629b6a40116b4aa8ab6cbdd6a4dc Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30436 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-01mb/google/hatch: Add NC gpios for display and correct the orderMaulik V Vaghela
Correcting order of display related GPIOs and also adding not connected pin definitions for display GPIOs BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I9498284d263516f65513d6395883b6b09dd70fd5 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-12-31mb/google/hatch: Enable NVME support for HatchV Sowmya
This patch enables the x4 NVME device for hatch, * Enable the Root port 9. * Assign the usage type for clock source. * Configure the GPIO for CLK SRC 1. BUG=b:120914069 BRANCH=none TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot. Change-Id: I69be6b21a5ae5962877a5c38180b5ffac532fed4 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30431 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-31mb/google/hatch: Add the USB port configurationV Sowmya
This patch adds the configurations for, * USB 2.0 ports. * USB 3.0 ports. * Enables USB xHCI controller. * GPIO config for USB2_OC2 and USB2_OC3. * Add the ACPI objects to configure USB ports. BUG=b:120914069 BRANCH=none TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot. Change-Id: Ia7b25c25b8208c678aeae3a32033611b69b54062 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30457 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-31mb/google/hatch: Enable SATA for HatchV Sowmya
This patch enables the SATA for hatch, * Enable the SATA port 1. * Configure the GPIO for SATA. BUG=b:120914069 BRANCH=none TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot. Change-Id: Iaf800d1531688c3d3b82600038ea1d7160ae4b0b Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30435 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-29mb/google/hatch: Enable Host Bridge/CSME/PMC/P2SB/SMBusRizwan Qureshi
* Enable host bridge. * Enable CSME. * Enable Power Management Controller. * Enable Primary to Side Band Bridge Controller. * Enable SmBus Controller. BUG=b:120914069 BRANCH=None TEST=code compiles with the changes Change-Id: I2fbf0ece845a7114ce5ab7f6482a935d9275deee Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/30465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-28mb/google/hatch: Enable SPI controller for HatchRizwan Qureshi
Enable SPI controller(D31:F5). BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I4d3acd3f31650d5b39927f8e3cfbb6187541653f Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/30438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-28mb/google/hatch: Enable console UARTMaulik V Vaghela
This patch incorporates following changes to enable console on UART0 1. update default console number to 0 2. Enable PCI port for UART0 GPIO configuration will be done by coreboot based on correct console number. Change-Id: I735d33674b276b28e2cbb753d3a6d83edbabe89d Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-12-28mb/google/hatch: Enable LPC/eSPI controllerAamir Bohra
Enable LPC/eSPI controller(D31:F0). EC would be using eSPI interface, since the strap GPP_C5 is pulled up. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ia4baf80a775ba8898055f82e80dc583e65c4ed0b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-12-27mb/google/hatch: Add SMI handlersAamir Bohra
Add SMI handlers for below SMI events: 1. eSPI SMI event. 2. ACPI enable/disable SMI event -> Add support for EC to configure SMI mask on ACPI disable. -> Add support for EC to configure SCI mask on ACPI enable. 3. Sleep(S3/S5) SMI event -> Add support for EC to configure wake mask for S3/S5 event Change-Id: I7127b44712cd89b3d583e9948698870ca0c64b2b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add HPD GPIO support for displaysMaulik V Vaghela
Adding hot plug detect GPIO support for external Type-C display in event for cable connect/disconnect. Change-Id: If9d52dc0f9916f761c8fdd88c76968aaf663e650 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30365 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-25mb/google/hatch: Modify hatch SPI flash layoutV Sowmya
This patch modifies the hatch flash layout to support IFWI 1.6 with the following regions, Flash Region 0: Descriptor [0x0 - 0xFFF] Flash Region 1: IFWI (consist of ME and PMC FW) [0x1000 - 0x3FFFFF] Flash Region 2: BIOS [0x1400000 - 0x1FFFFFF] Change-Id: I3d05fb50e970737a2552b85d6aebed943bf2b6cb Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30413 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-25mb/google/hatch: Enable EC LPC interface and configure IO decode rangeAamir Bohra
Enable EC LPC interface and configure below LPC IO decode ranges: 1. 0x200-020F: EC host command range. 2. 0x800-0x8FF: EC host command args and params. 3. 0x900-0x9ff: EC memory map range. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ie5d92df80d6b3a5913d0cbe78c1b8eefb5269d4a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add SoC and EC asl files in DSDTAamir Bohra
This implementation adds below code: 1. Add SOC ACPI code in dsdt.asl -> platform.asl -> globalnvs.asl -> cpu.asl -> northbridge.asl -> southbridge.asl -> sleepstate.asl 2. Add chromeos.asl in dsdt.asl 3. Add EC ACPI code in dsdt.asl -> superio.asl -> ec.asl 4. Remove config for WAK/PTS ACPI method as chromeec doesn't implement those. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Icf1b1d7e34a7e863139c3583903f3b1e2cdc8da6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add EC trigger events and acpi configsAamir Bohra
This implemetation adds EC SCI, SMI, S5/S3 wake trigger events. Also adds the EC specific ACPI configs to enable support for ALS, EC PD device and PS2 keyboard device. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I3a86f609c269cb59e546fc7ba4ba032e5ea8341a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30281 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-23mb/google/hatch: Enable IGD (Integrated GFX Device)Maulik V Vaghela
This patch ensures following 2 features 1. Enable IGD controller in devicetree.cb 2. Pass required FSP UPD to perform internal graphics initialization Change-Id: I607199590d793a70e1e20bb3241fc34467aa829d Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-23mb/google/hatch: Add memory init setup for hatchAamir Bohra
This implementation adds below support: 1. Add support to read memory strap. 2. Add support to configure below memory parameters -> rcomp resistor configuration -> dqs mapping -> ect and ca vref config 3. Include SPD configuration BUG=b:120914069 BRANCH=None TEST=USE="-intel_mrc -bmplk" emerge-hatch coreboot Change-Id: I9bda08bd0b9f91ebb96b39291e15473492a6bf19 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30248 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-22mb/google/hatch: Enable Elan TrackpadShelley Chen
BUG=b:120914069 BRANCH=None TEST=USE="-intel_mrc" emerge-hatch coreboot Change-Id: I91db5745d1db16ab4b2fbb7f8c415bd7c1eb29e9 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-22mb/google/hatch: Fixes to initial hatch mainboard checkinShelley Chen
Incorporating some feedback to initial hatch mainboard checking (CL:30169) that came in after the CL merged. Updated the chromeos.fmd with the following, * SI_ALL = 3MB * SI_BIOS = 16MB BUG=b:20914069 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a -v Change-Id: I4e311c68873f10f71314e44d3a714639a06dbee8 Signed-off-by: Shelley Chen <shchen@google.com> Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30296 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-21mb/google/hatch: Enable H1 TPM support over SPI interfaceAamir Bohra
Add code support to enable H1 TPM interfaced to SOC on GSPI0. The TPM interrupt is mapped to GPP_C21. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ib63a0b473f632d91745102ebd01993e8d65b9552 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30210 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-21mb/google/hatch: Clean up gpio definitions in hatch variantAamir Bohra
This implementation cleans up gpio configuration functions and limit definition to baseboard only for now, until variant specfic overides are needed. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I563f6b97812b32d6e3d99e3df512dc112da78aea Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30291 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-13mb/google/hatch: Creating skeleton directories and filesShelley Chen
Creating skeleton files and directories in mainboard for the new Hatch board. This is to facilitate development for different parties involved. BUG=None BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I5fc60c178f83034abe5d846d0f4169072b66f448 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 14:29:52 +0000