index
:
coreboot.git
macbookair5_2
macbookpro10_1
main
master
mbp101_medisable
mbp101_medisable_1
mbp82
x230
my copy of coreboot
User &
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
/
mainboard
/
google
/
hatch
Age
Commit message (
Expand
)
Author
2019-08-15
mb/google/hatch/var/kindred: Disable eMMC for new SKU ID 23 and 24
David Wu
2019-08-15
mainboard/google: Fix indirect includes
Kyösti Mälkki
2019-08-13
mb/google/hatch/var/kohaku: Change Atmel touchscreen HID to PRP0001
Furquan Shaikh
2019-08-13
mb/google/hatch: Kohaku: Enable DMIC1 in device tree
Mac Chiang
2019-08-11
kohaku: add TEMP_SENSOR_3 and TEMP_SENSOR_4 to DPTF
Paul Fagerburg
2019-08-11
mb/google/hatch: Fix Kohaku pen GPIO configuration
Tim Wawrzynczak
2019-08-09
mb/google/hatch: Refactor override_early_gpio_table
Tim Wawrzynczak
2019-08-07
mb/google/hatch: Kohaku: Re-setup dual-routing of EMR_GARAGE_DET
Tim Wawrzynczak
2019-08-07
mb/google/hatch: Kohaku: Add touchscreen controller to device tree
Tim Wawrzynczak
2019-08-07
mb/google/kohaku: Enable stylus pen device
Seunghwan Kim
2019-08-05
mb/google/helios: Set SPKR_PA_EN PIN high for boot beep
Subrata Banik
2019-08-03
mb/google/hatch/variants/helios: Adjust all I2C CLK and I2C0 SDA hold time
Frank_Chu
2019-08-03
mb/google/hatch: Enable PmTimerDisabled config to reduce S0ix power usage
Subrata Banik
2019-08-02
mb/google/hatch: Fine-tune Kohaku I2C CLK frequency
Philip Chen
2019-07-31
mb/google/hatch: Initialize SSD GPIOs in bootblock
Shelley Chen
2019-07-31
mb/google/kohaku: Update DPTF parameters and TDP PL1/PL2
Seunghwan Kim
2019-07-31
mb/google/hatch/variants/hatch: Set PCH Thermal Threshold value to 77 deg C
Sumeet Pawnikar
2019-07-30
mb/google/hatch: Enable chipset_lockdown coreboot config for hatch
Subrata Banik
2019-07-30
mb/google/hatch: Add option to enable WiFi SAR configs
Furquan Shaikh
2019-07-26
mb/google/hatch/helios: Update GPIO and device tree
Tim Wawrzynczak
2019-07-23
mb/google/hatch: Add FP MCU to helios device tree
Philip Chen
2019-07-21
mb/google/hatch: Remove hatch_whl
Philip Chen
2019-07-21
mb/google/hatch/var/kindred: Implement variant_devtree_update()
David Wu
2019-07-21
mb/google/hatch: expose get_board_sku() as global
David Wu
2019-07-21
mb/google/hatch: Add support for variant_devtree_update()
David Wu
2019-07-19
mb/google/hatch: Fix SD card is detected as read only issue
Subrata Banik
2019-07-19
mb/google/helios: Add ALC1011 in device tree to enable speaker amps
Sathya Prakash M R
2019-07-18
mb/google/hatch/var/helios: Implement variant_memory_sku()
Furquan Shaikh
2019-07-18
mb/google/hatch: Add support for variant_memory_sku()
Furquan Shaikh
2019-07-18
mb/google/hatch: Add FP MCU to kohaku device tree
Shelley Chen
2019-07-18
mb/google/hatch: Disable wireless charging
Subrata Banik
2019-07-16
mb/google/hatch: Disable Bluetooth in bootblock and enable in ramstage
Shelley Chen
2019-07-13
mb/google/hatch: Fix trackpad configuration in overridetree
Furquan Shaikh
2019-07-11
mb/google/hatch: Update AC/DC loadline values
Rizwan Qureshi
2019-07-11
mb/google/hatch/variants: Fix nonworking touch pad
Frank_Chu
2019-07-11
mb/google/hatch: Enable/disable GPIO clock gating
Tim Wawrzynczak
2019-07-11
mb/google/hatch: Enable LPIT inclusion in DSDT
Tim Wawrzynczak
2019-07-11
mb/google/hatch: Disable GPIO community dynamic clock gating
Tim Wawrzynczak
2019-07-11
mb/google/hatch: Fix interrupt trigger type for GPP_H0(HP_INT_L)
Furquan Shaikh
2019-07-09
arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-class
Kyösti Mälkki
2019-07-08
mb/google/hatch: Set GPP_D9 as enable pin for Goodix Touch Screen and
Frank Wu
2019-07-07
mb/google/hatch: Update GPIO settings for SD card and SPI1 Chip select
Krishna Prasad Bhat
2019-07-07
mb/google/hatch/var/kindred: Add Raydium touchscreen support
David Wu
2019-07-07
mb/google/hatch/var/kindred: Update ELAN GPIO/IRQ and add Synaptics Touchpad
David Wu
2019-07-07
mb/google/hatch/variants/kindred: Enable eMMC support
David Wu
2019-07-02
mb/google/hatch: Set trackpad irq and wake to GPP_A21
Shelley Chen
2019-07-02
mb/google/hatch: Add INVERT to all IOAPIC pads
Shelley Chen
2019-06-28
mb/google/kohaku: Correct trackpad i2c address
Seunghwan Kim
2019-06-26
mb/google/hatch: Add a GPIO to enable/disable FPMCU power
Philip Chen
2019-06-26
mb/google/hatch: Remove pulls on NC pads
Furquan Shaikh
2019-06-26
mb/google/hatch/variants/baseboard: Update PL2 power limit value
Sumeet Pawnikar
2019-06-21
mb/google/hatch/variants/kindred: Update memory strap GPIOs
David Wu
2019-06-21
mb/google/hatch: Do not pull down GPP_F2 internally
Philip Chen
2019-06-20
mb/google/hatch: Remove unused USB2 port5 from baseboard devicetree
Aamir Bohra
2019-06-19
mb/google/hatch/variants/hatch: Adjust all I2C CLK to meet spec
John Su
2019-06-16
mb/google/hatch: Move memory strap GPIOs under variant gpio header
Aamir Bohra
2019-06-15
mainboard/google/hatch: Scrub Helios GPIOs
Tim Wawrzynczak
2019-06-14
hatch: Fix pen eject wake polarity
Tim Wawrzynczak
2019-06-14
mainboard/google/hatch: Update Helios device tree
Tim Wawrzynczak
2019-06-13
mb/google/hatch/variants/helios: Use LPDDR3 memory
Paul Fagerburg
2019-06-13
mb/google/{hatch, sarien, arcada}: Make HECI1 chip config disable
Subrata Banik
2019-06-12
mb/google/hatch: Disable dynamic clock gating for cr50's GPIO
Subrata Banik
2019-06-09
mb/google/hatch: Add 16G 2666 LPDDR3 SPD
Shelley Chen
2019-06-09
mb/google/hatch: Add 8G 3200 SPD
Shelley Chen
2019-06-05
mb/google/hatch: Increase RW_LEGACY to 1M for 16MB BIOS
Shelley Chen
2019-06-04
mb/google/hatch: Enable LTR for PCIe ports
Furquan Shaikh
2019-05-31
mainboard/google/hatch: Add Helios support
Tim Wawrzynczak
2019-05-31
mb/google/hatch: Create helios variant
Tim Wawrzynczak
2019-05-31
mb/google/hatch: Create kindred variant
Paul Fagerburg
2019-05-23
mb/google/hatch/variants: Fix DPTF sensor IDs
Evan Green
2019-05-21
mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset INT
Kane Chen
2019-05-20
mb/google/{arcada, hatch, sarien}: Override FSP default GPIO PM configuration
Subrata Banik
2019-05-20
mb/google/hatch: Change SD_CD# reset config to PLTRST
Krishna Prasad Bhat
2019-05-15
soc/intel/cannonlake: Support different SPD read type for each slot
Philip Chen
2019-05-13
mainboard: remove "recovery" gpio, selectively add "presence" gpio.
Matt Delco
2019-05-10
mb/google/hatch: Fine tune Goodix touch screen timing
Dtrain Hsu
2019-05-10
mb/google/hatch: Fix GBB_HWID for kohaku
Furquan Shaikh
2019-05-06
mainboard/google/hatch: Enable PEN_EJECT_L as wake & notify source.
Tim Wawrzynczak
2019-04-30
mb/google/hatch: Modify IRQ configuration to enable RT5682 headset INT
Naveen Manohar
2019-04-29
mb/google/hatch/variants/baseboard: remove unused dqs_map
Paul Fagerburg
2019-04-29
mb/google/hatch/variants/kohaku: Add support for LPDDR3 configurations
Paul Fagerburg
2019-04-25
mb/google/hatch/: FPMCU not rebooted when DUT reboots
Tim Wawrzynczak
2019-04-25
mb/google/hatch: Pull up GPP_C13 for hatch and hatch_whl
Philip Chen
2019-04-24
mb/google/kohaku: Update overridetree.cb
Tim Wawrzynczak
2019-04-24
mb/google/hatch: Move SD card detect GPIO.
Tim Wawrzynczak
2019-04-24
mb/google/hatch/var/kohaku: Skip UART0 config in FSP
Furquan Shaikh
2019-04-19
kohaku: mb/hatch/gpio: Scrub Kohaku GPIOs.
Tim Wawrzynczak
2019-04-15
mb/google/hatch: Update sleep signal assertion widths
Rizwan Qureshi
2019-04-13
mb/google/hatch: Restore Goodix Touch Screen
Eric Lai
2019-04-12
mb/google/hatch: Use GPIO IRQ for sx9310 device
Furquan Shaikh
2019-04-12
mb/google/hatch: Configure reset config to PLTRST for IOAPIC pads
Furquan Shaikh
2019-04-12
mb/google/hatch: Skip UART0 config in FSP
Furquan Shaikh
2019-04-09
mb/google/hatch: Support 16MiB fmap
Philip Chen
2019-04-09
mb/google/hatch: Add ACPI support for BT reset functionality
Tim Wawrzynczak
2019-04-04
mb/google/hatch: Move I2C/SPI options to override tree
Furquan Shaikh
2019-04-04
mb/google/hatch: Change the DEVSLP reset config to PLTRST
Rizwan Qureshi
2019-04-04
mb/google/hatch: Add Kohaku board
Shelley Chen
2019-04-04
mb/google/hatch: Create kohaku variant
Shelley Chen
2019-04-03
mb/google/hatch: Enable Goodix Touch Screen
Eric Lai
2019-04-02
mb/google/hatch: Change GPIO_E1 setting
John Su
[next]