summaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch
AgeCommit message (Expand)Author
2019-06-15mainboard/google/hatch: Scrub Helios GPIOsTim Wawrzynczak
2019-06-14hatch: Fix pen eject wake polarityTim Wawrzynczak
2019-06-14mainboard/google/hatch: Update Helios device treeTim Wawrzynczak
2019-06-13mb/google/hatch/variants/helios: Use LPDDR3 memoryPaul Fagerburg
2019-06-13mb/google/{hatch, sarien, arcada}: Make HECI1 chip config disableSubrata Banik
2019-06-12mb/google/hatch: Disable dynamic clock gating for cr50's GPIOSubrata Banik
2019-06-09mb/google/hatch: Add 16G 2666 LPDDR3 SPDShelley Chen
2019-06-09mb/google/hatch: Add 8G 3200 SPDShelley Chen
2019-06-05mb/google/hatch: Increase RW_LEGACY to 1M for 16MB BIOSShelley Chen
2019-06-04mb/google/hatch: Enable LTR for PCIe portsFurquan Shaikh
2019-05-31mainboard/google/hatch: Add Helios supportTim Wawrzynczak
2019-05-31mb/google/hatch: Create helios variantTim Wawrzynczak
2019-05-31mb/google/hatch: Create kindred variantPaul Fagerburg
2019-05-23mb/google/hatch/variants: Fix DPTF sensor IDsEvan Green
2019-05-21mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset INTKane Chen
2019-05-20mb/google/{arcada, hatch, sarien}: Override FSP default GPIO PM configurationSubrata Banik
2019-05-20mb/google/hatch: Change SD_CD# reset config to PLTRSTKrishna Prasad Bhat
2019-05-15soc/intel/cannonlake: Support different SPD read type for each slotPhilip Chen
2019-05-13mainboard: remove "recovery" gpio, selectively add "presence" gpio.Matt Delco
2019-05-10mb/google/hatch: Fine tune Goodix touch screen timingDtrain Hsu
2019-05-10mb/google/hatch: Fix GBB_HWID for kohakuFurquan Shaikh
2019-05-06mainboard/google/hatch: Enable PEN_EJECT_L as wake & notify source.Tim Wawrzynczak
2019-04-30mb/google/hatch: Modify IRQ configuration to enable RT5682 headset INTNaveen Manohar
2019-04-29mb/google/hatch/variants/baseboard: remove unused dqs_mapPaul Fagerburg
2019-04-29mb/google/hatch/variants/kohaku: Add support for LPDDR3 configurationsPaul Fagerburg
2019-04-25mb/google/hatch/: FPMCU not rebooted when DUT rebootsTim Wawrzynczak
2019-04-25mb/google/hatch: Pull up GPP_C13 for hatch and hatch_whlPhilip Chen
2019-04-24mb/google/kohaku: Update overridetree.cbTim Wawrzynczak
2019-04-24mb/google/hatch: Move SD card detect GPIO.Tim Wawrzynczak
2019-04-24mb/google/hatch/var/kohaku: Skip UART0 config in FSPFurquan Shaikh
2019-04-19kohaku: mb/hatch/gpio: Scrub Kohaku GPIOs.Tim Wawrzynczak
2019-04-15mb/google/hatch: Update sleep signal assertion widthsRizwan Qureshi
2019-04-13mb/google/hatch: Restore Goodix Touch ScreenEric Lai
2019-04-12mb/google/hatch: Use GPIO IRQ for sx9310 deviceFurquan Shaikh
2019-04-12mb/google/hatch: Configure reset config to PLTRST for IOAPIC padsFurquan Shaikh
2019-04-12mb/google/hatch: Skip UART0 config in FSPFurquan Shaikh
2019-04-09mb/google/hatch: Support 16MiB fmapPhilip Chen
2019-04-09mb/google/hatch: Add ACPI support for BT reset functionalityTim Wawrzynczak
2019-04-04mb/google/hatch: Move I2C/SPI options to override treeFurquan Shaikh
2019-04-04mb/google/hatch: Change the DEVSLP reset config to PLTRSTRizwan Qureshi
2019-04-04mb/google/hatch: Add Kohaku boardShelley Chen
2019-04-04mb/google/hatch: Create kohaku variantShelley Chen
2019-04-03mb/google/hatch: Enable Goodix Touch ScreenEric Lai
2019-04-02mb/google/hatch: Change GPIO_E1 settingJohn Su
2019-04-02mb/google/hatch: Re-configure GPP_A12 as GPO before entering sleepKrishna Prasad Bhat
2019-04-01mb/google/hatch: Unlock GPIO padsKrishna Prasad Bhat
2019-03-29mb/google/hatch: Deassert EN_PP3300_WWAN during sleepMaulik V Vaghela
2019-03-28mb/google/hatch/variants: Add DPTF based Fan controlSumeet Pawnikar
2019-03-28mb/google/hatch: Initialize FPMCU_PCH_BOOT1Shelley Chen
2019-03-27mb/mainboard/google/hatch/variants: Set tcc_offset valueSumeet Pawnikar
2019-03-27mb/google/hatch: Add GPIO_A8 for Pen detect functionDtrain Hsu
2019-03-22mb/google/hatch: Enable FP MCUShelley Chen
2019-03-22mb/google/hatch: Add overridetree to hatch variantShelley Chen
2019-03-22mb/google/hatch: Add SX9310 SAR0 sensorEvan Green
2019-03-22mb/google/hatch: Enable HUNG_TASK wake interruptEvan Green
2019-03-21soc/intel/cannonlake: Assign FSP UPDs for HPD and Data/CLK of DDI portsKrishna Prasad Bhat
2019-03-19mb/google/hatch: Log EC events during S0ix resumeV Sowmya
2019-03-18mb/google/hatch: Set hatch to use SOC_INTEL_COMETLAKEShelley Chen
2019-03-16x86/smbios: Untangle system and board tablesNico Huber
2019-03-15mb/google/hatch: Enable TBMC deviceDtrain Hsu
2019-03-14mb/google/hatch: Define GPP_C13 as EC_SYNC_IRQPhilip Chen
2019-03-14mb/google/hatch: fix RCompResistor[0] valueShelley Chen
2019-03-14mb/google/hatch: Update DRAM IDsShelley Chen
2019-03-14mb/google/hatch: Use MEM_CH_SEL to indicate single_channel skuShelley Chen
2019-03-14mb/google/hatch: Query the EC for board versionIvy Jian
2019-03-13mb/google/hatch: Provide DRAM part number from EEPROMFurquan Shaikh
2019-03-11mb/google/hatch: Add Hatch_whl boardShelley Chen
2019-03-11mb/google/hatch: Enable audio supportSathya Prakash M R
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
2019-03-08mb/google/hatch: Create hatch_whl variantShelley Chen
2019-03-08mb/google/hatch: Initialize all gpiosShelley Chen
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
2019-02-28mb/google/hatch: Add GPIO programming for GPP_C0 to GPP_C7Maulik V Vaghela
2019-02-27mb/google/hatch: Initialize GPIO_PCH_WP early in bootRizwan Qureshi
2019-02-27mb/google/hatch: Select SD_PWR_EN Active high configRizwan Qureshi
2019-02-27mb/google/hatch: update SD card detect GPIORizwan Qureshi
2019-02-22mb/google/hatch: Enable wake from trackpadShelley Chen
2019-02-22mb/google/hatch: Make EC software sync enabled by defaultScott Collyer
2019-02-15mb/google/hatch: Enable DPTF functionalitySumeet Pawnikar
2019-02-13mb/google/hatch: Bump up the BIOS region to 28MiBFurquan Shaikh
2019-02-13mb/google/hatch: Configure GPIO pad for non-inversionAamir Bohra
2019-02-08mb/google/hatch: Replace part-specific SPD files with generic onesShelley Chen
2019-02-07mb/google/{hatch,sarien}: Configure GPIOs using cnl_configure_padsFurquan Shaikh
2019-02-07soc/intel/cannonlake: Add Whiskeylake SoC kconfigSubrata Banik
2019-02-06mb/google/hatch: Configure I2C busesFurquan Shaikh
2019-02-05mb/google/hatch: Add keyboard backlight supportIvy Jian
2019-02-05mb/google/hatch: Add USB port capability ACPI support for USB2 port10Aamir Bohra
2019-02-04soc/intel/cannonlake: Remove SOC_INTEL_CANNONLAKE_MEMCFG_INIT KconfigSubrata Banik
2019-02-01mb/google/hatch: Enable S0ixShelley Chen
2019-01-30mb/google/hatch: Enable AP Wake from ECShelley Chen
2019-01-24mb/google/hatch: Enable support for WWANMaulik V Vaghela
2019-01-24mb/google/hatch: Enable PCIe WLAN and BTMaulik V Vaghela
2019-01-23mb/google/hatch: Enable SD card support for hatchMaulik V Vaghela
2019-01-22mb/google/hatch: Remove MAINBOARD_USES_IFD_EC_REGION selectionSubrata Banik
2019-01-17mb/google/hatch: Configure miscellaneous featuresRonak Kanabar
2019-01-17hatch: Add sbmios_mainboard_sku functionShelley Chen
2019-01-17hatch: disable sw syncShelley Chen
2019-01-14mb/google/hatch: Use USB2 Port 10 for BT over CnViAamir Bohra
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
2019-01-10sb/intel/common: Show "Add EC firmware" only for boards that need itJan Tatje
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 16:45:57 +0000