summaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants
AgeCommit message (Expand)Author
2020-01-03mainboard/google/puff: Clean up pcie 15.3 ep in dtEdward O'Callaghan
2020-01-02mainboard/google/puff: Enable net driver on pcie epEdward O'Callaghan
2019-12-31mb/google/hatch/akemi: modify DPTF parameters for new FANPeichao Wang
2019-12-27mb/google/kohaku: Update reset_delay_ms for digitizer deviceSeunghwan Kim
2019-12-27mb/google/hatch/var/dratini: Add a new sku for dragonairWisley Chen
2019-12-26mb/google/hatch/akemi: Set touchpad data hold time more thanPeichao Wang
2019-12-26hatch: Fix FPMCU pwr/rst gpio handling for dratini/jinlonWisley Chen
2019-12-26mb/google/hatch/var/jinlon: Update DPTF parametersWisley Chen
2019-12-25mainboard/google/puff: Add GPIO configurationEdward O'Callaghan
2019-12-25mb/google/hatch/variant/kohaku: Fix Kohaku baseboard/gpio.c mux commentsEdward O'Callaghan
2019-12-25mainboard/google/hatch: Move gpio GPP_H3 config up from baseboardEdward O'Callaghan
2019-12-25mainboard/google/hatch: Move gpio GPP_C* NC down into baseboardEdward O'Callaghan
2019-12-25mainboard/google/hatch: Move gpio GPP_A* NC down into baseboardEdward O'Callaghan
2019-12-24mainboard/variant/puff: set PL values for puffKangheui Won
2019-12-24mainboard/google/hatch: Remove MAX98357A assumption from baseboardEdward O'Callaghan
2019-12-23mainboard/google/puff: Configure HDA registersEdward O'Callaghan
2019-12-23mainboard/google/puff: Enable func0 of 1c for nicEdward O'Callaghan
2019-12-20mb/google/hatch/var/kindred: Decrease i2c frequency below 400 KHzDavid Wu
2019-12-20mb/google/hatch/var/jinlon: Config WWAN_RESETWisley Chen
2019-12-20mainboard/google/puff: Add extra USB configurationKangheui Won
2019-12-20mainboard/google/puff: Enable pcie7 ep in dtEdward O'Callaghan
2019-12-20mainboard/google/puff: Clean up dt for pci 15.2Edward O'Callaghan
2019-12-19mb/google/hatch: Add mushu variantBob Moragues
2019-12-19mainboard/google/puff: enable emmcKangheui Won
2019-12-12mb/google/hatch/variant/akemi: Increase Goodix touch screen reset delay timePeichao Wang
2019-12-12mb/google/hatch: Add new SKU ID 3 and 4Peichao Wang
2019-12-11mb/goog/hatch/var/dratini: Tune i2c frequency to 400 KHzWisley Chen
2019-12-10mb/google/kohaku: Update TCC offset settingSeunghwan Kim
2019-12-05hatch: Fix FPMCU pwr/rst gpio handlingCraig Hesling
2019-12-05Revert "mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatch"Kane Chen
2019-12-04mb/google/kohaku: Adjust I2C clock frequencySeunghwan Kim
2019-12-04mb/google/hatch/var/akemi: tune DPTF for AkemiPeichao Wang
2019-12-03hatch: Create stryke variantDtrain Hsu
2019-12-02mb/google/hatch/variants/helios: DPTF solution updateKane Chen
2019-11-27mb/google/hatch/var/kindred: Add ELAN touchscreen supportDavid Wu
2019-11-22mb/google/hatch/variant/kohaku: Config MEM_STRAP GPIOsShelley Chen
2019-11-20/mb/google/hatch: Create jinlon variantWisley Chen
2019-11-16kohaku: Set GPP_A10 to NCShelley Chen
2019-11-14/mb/google/hatch/var/dratini: Add new memory supportWisley Chen
2019-11-13mb/google/hatch/variants/helios: Fix leakage voltage problem on touchscreenKane Chen
2019-11-12mainboard/google/hatch: Create helios_diskswap variantAlexis Savery
2019-11-11Helios: Set the reset delay for Goodix touchscreen to 120msShelley Chen
2019-11-08mb/google/hatch/var/akemi: disable unused USB port for Akemi platformPeichao Wang
2019-11-07hatch: Create puff variantEdward O'Callaghan
2019-11-07mb/google/hatch/variants/helios: Modify touchscreen power on sequenceKane Chen
2019-11-05mb/google/hatch/variants/helios: Update TSR3 sensor thresholdsSumeet Pawnikar
2019-11-04mb/google/hatch: update DLL values for KindredJamie Chen
2019-10-30mb/google/hatch/variants/helios: Modify DPTF parametersKane Chen
2019-10-30hatch: refactor gpio table into baseboard, allow empty SPDsPaul Fagerburg
2019-10-27Dragonair: Add sku23Wisley Chen
2019-10-25mb/google/hatch: Set DSM parameters for HeliosCheng-Yi Chiang
2019-10-25mb/google/hatch: Fix speaker mapping for HeliosCheng-Yi Chiang
2019-10-24mb/google/hatch/var/akemi: Update DPTF thermal sensor for AkemiPeichao Wang
2019-10-22mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatchKane Chen
2019-10-22mb/mainboard/hatch: support Goodix touch panel for AkemiPeichao Wang
2019-10-21src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>'Elyes HAOUAS
2019-10-21mb/google/hatch/var/dratini: Add ELAN touchscreen supportWisley Chen
2019-10-21mb/google/hatch/akemi: disable unused devices for AkemiPeichao Wang
2019-10-18mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
2019-10-16mb/google/hatch/akemi: Tune I2C bus 1 clockPeichao Wang
2019-10-16mb/google/hatch/var/dratini: Add enable pin for elan touchscreenWisley Chen
2019-10-16mb/google/hatch/var/dratini: update goodix power sequenceWisley Chen
2019-10-15helios: Add TEMP_SENSOR4 to DPTFPaul Fagerburg
2019-10-15mb/google/hatch: set wifi sar for dragonairWisley Chen
2019-10-15mb/google/hatch: Initialize FPMCU_PCH_BOOT1Wisley Chen
2019-10-11mb/google/hatch: Add new touchscreen option for KohakuTim Wawrzynczak
2019-10-09mb/google/hatch: Remove pen device for dratini/dragonairWisley Chen
2019-10-09mb/google/hatch: Set FPS as wake sourceShelley Chen
2019-10-08mb/google/kohaku: Assign GPP_A19 as reset_gpio of stylusSeunghwan Kim
2019-10-02soc/intel: Replace config_of_path() with config_of_soc()Kyösti Mälkki
2019-09-26mb/mainboard/hatch: support elan touchpad for AkemiPeichao Wang
2019-09-24mb/google/kohaku: Update DPTF parameters and TCC offset settingSeunghwan Kim
2019-09-22mb/mainboard/hatch: add spd: 8G_3200 for AkemiPeichao Wang
2019-09-22mb/google/hatch: Add G2Touch Touchscreen supportWisley Chen
2019-09-20mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configurationTim Wawrzynczak
2019-09-18mb/google/hatch/variants/helios: Add DPTF control for ambient sensorSumeet Pawnikar
2019-09-18mb/google/hatch/variants/helios: Update DPTF parametersSumeet Pawnikar
2019-09-16mb/google/kohaku: Update USB port settingsSeunghwan Kim
2019-09-13mb/google/hatch: Merge emmc_sku_gpio_table and gpio_table to one tablePeichao Wang
2019-09-13mb/google/hatch/var: Increase Goodix touchscreen reset delay to 500msPhilip Chen
2019-09-12mb/google/hatch: Configure SATA DEVSLP pad reset config to PLT_RSTAamir Bohra
2019-09-11mb/google/hatch: Create dratini variantWisley Chen
2019-09-10mb/google/hatch/variants/helios: Modify FPU power on sequenceFrank_Chu
2019-09-09mb/google/hatch: Distinguish SKU1 and 2 for eMMC and SSD respectivelyPeichao Wang
2019-09-06mb/google/hatch/variants/helios: Update DPTF parameters and TDP PL1/PL2Frank_Chu
2019-09-04mb/google/hatch/var/kindred: Update DPTF parameters and TDP PL1/PL2David Wu
2019-09-03mb/google/hatch/var/kindred: Update DRAM IDs for 8G and 16G 3200David Wu
2019-09-02mb/google/hatch/var/helios: Increase touchscreen reset delay to 120msPhilip Chen
2019-08-30mb/google/hatch: Add settings for noise mitgationDtrain Hsu
2019-08-28mb/google/hatch/variants: Increase touchscreen reset delay to 120msSumeet Pawnikar
2019-08-28mb/google/hatch: Override DLL values for KindredJamie Chen
2019-08-23mb/google/hatch/var/kindred:: Add enable signal for touch screenPhilip Chen
2019-08-23mb/google/hatch/variants/kindred: Remove unused devicesPhilip Chen
2019-08-21mb/google/kohaku: Correct DPTF temp sensor IDsSeunghwan Kim
2019-08-20mb/google/hatch: Skip SD card controller WP pin configuration from FSPAamir Bohra
2019-08-20mb/google/kohaku: Use level trigger for touchscreen interruptSeunghwan Kim
2019-08-16mb/google/hatch: Create Akemi variantPeichao Wang
2019-08-15mb/google/hatch/var/kindred: Configure GPIOs for eMMC SKUsDavid Wu
2019-08-15mb/google/hatch/var/kindred: Disable SATA controller for eMMC SKUsDavid Wu
2019-08-15mb/google/hatch/var/kindred: Configure GPIOs for SSD SKUsDavid Wu
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 10:13:02 +0000