summaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants
AgeCommit message (Expand)Author
2020-04-16mb/google/hatch/var/kindred: Override VBT selection for kledDavid Wu
2020-04-16mb/google/puff: Add variant specific DPTF parametersTim Chen
2020-04-15mb/google/hatch: Add Kaisa variantAndrew McRae
2020-04-15mb/google/hatch: Add Duffy variantEdward O'Callaghan
2020-04-15mb/google/puff: Fix up WLAN_OFF gpio configurationEdward O'Callaghan
2020-04-15mainboard/puff: Tune ALC5682I rise_fall times on i2cEdward O'Callaghan
2020-04-14mb/google/nightfury: Update tdp_pl1_override valueSeunghwan Kim
2020-04-14mb/google/hatch: Use tabs for alignmentPaul Menzel
2020-04-07mb/google/nightfury: Update DPTF parametersSeunghwan Kim
2020-04-06mb/google/hatch: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-30mb/google/kohaku: Add enable_delay_ms for wacom penEvan Green
2020-03-30mb/google/hatch/var/kindred: set wifi sar for kledDavid Wu
2020-03-29hatch: Create sushi variantPaul Fagerburg
2020-03-26mb/google/hatch/variants/nightfury: Replace unneeded white spaces by tabsElyes HAOUAS
2020-03-26drivers/net/r8168: Fix ethernet_mac[0-9] format for vpdEdward O'Callaghan
2020-03-24mb/google/hatch: Give first NIC in Puff idx 1 for vpdEdward O'Callaghan
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
2020-03-20mb/google/nightfury: Update overridetree.cbSeunghwan Kim
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2020-03-15mb/google/hatch: Create palkia variantKane Chen
2020-03-12mb/google/hatch: Create nightfury variantraymondchung
2020-03-11mb/google/puff: Enable cros_ec_keyb deviceKangheui Won
2020-03-02mb/google/kohaku: Add LPDDR 16G 2133 supportSeunghwan Kim
2020-03-02mb/google/hatch/var/jinlon: Disable EPS on some SKUsRajat Jain
2020-03-02mb/google/hatch/var/jinlon: Enable gfx/generic driverRajat Jain
2020-02-28mainboard/google/hatch/puff: Toggle on TetonGlacierModeEdward O'Callaghan
2020-02-28mainboard/google/hatch: Migrate onto SKU ID helpersEdward O'Callaghan
2020-02-27mb/google/hatch/var/jinlon: Configure GPP_E0 as outputRajat Jain
2020-02-26mb/google/hatch: reflow commentPatrick Georgi
2020-02-26mainboard/hatch: Fix GPE wake commentsEdward O'Callaghan
2020-02-17Revert "mb/google/hatch: Override CPU flex ratio"Tim Wawrzynczak
2020-02-07mainboard/hatch: Fix puff DP output on cold bootsEdward O'Callaghan
2020-02-06mb/google/hatch: Add noise mitigation setting for dratini/jinlonWisley Chen
2020-02-05mb/google/hatch: Correct PCIe ports setting for mushuAmanda Huang
2020-02-04mb/google/hatch: Enable Audio DSP oscillator qualification for S0ixAamir Bohra
2020-02-04mb/google/puff: Enable HECI communicationJamie Chen
2020-02-01hatch/mushu: Fix FPMCU pwr/rst gpio handlingCraig Hesling
2020-02-01mb/google/hatch/variants/mushu: Enable dGPU BOMACO modeAmanda Huang
2020-02-01mb/google/hatch: Modify kohaku's EC_SCI_EVENTS maskTim Wawrzynczak
2020-02-01mb/google/hatch: Override CPU flex ratioSubrata Banik
2020-01-30mainboard/google/hatch: Fix Puff _PR to toggle NIC ISOLATE# for S0ixEdward O'Callaghan
2020-01-27mainboard/google/hatch: Set GPP_C7 as the wake pin for the NIC on PuffSam McNally
2020-01-22mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
2020-01-22mb/google/hatch: Kohaku: Add MKBP to suspend wake eventsTim Wawrzynczak
2020-01-21mb/google/puff: Add ac/dc loadline configuationsJamie Chen
2020-01-21mb/google/hatch/var/jinlon: Remove DPTF fan controlWisley Chen
2020-01-21mainboard/hatch: Fix puff USB ACPI names and typesEdward O'Callaghan
2020-01-18mainboard/google/puff: update SATA strengthTim Chen
2020-01-18mainboard/google/puff: update USB configurationJamie Chen
2020-01-18mainboard/puff: Fix ACPI tables to advertise correct featuresEdward O'Callaghan
2020-01-16/mb/google/hatch/variants/helios: Remove MAX98357A devicetree entryKrishna Prasad Bhat
2020-01-10mb/google/hatch/variants/helios: Modify DPTF parametersKane Chen
2020-01-08mb/google/hatch: Remove fixed IccMax valuesJamie Chen
2020-01-03mainboard/google/puff: Clean up pcie 15.3 ep in dtEdward O'Callaghan
2020-01-02mainboard/google/puff: Enable net driver on pcie epEdward O'Callaghan
2019-12-31mb/google/hatch/akemi: modify DPTF parameters for new FANPeichao Wang
2019-12-27mb/google/kohaku: Update reset_delay_ms for digitizer deviceSeunghwan Kim
2019-12-27mb/google/hatch/var/dratini: Add a new sku for dragonairWisley Chen
2019-12-26mb/google/hatch/akemi: Set touchpad data hold time more thanPeichao Wang
2019-12-26hatch: Fix FPMCU pwr/rst gpio handling for dratini/jinlonWisley Chen
2019-12-26mb/google/hatch/var/jinlon: Update DPTF parametersWisley Chen
2019-12-25mainboard/google/puff: Add GPIO configurationEdward O'Callaghan
2019-12-25mb/google/hatch/variant/kohaku: Fix Kohaku baseboard/gpio.c mux commentsEdward O'Callaghan
2019-12-25mainboard/google/hatch: Move gpio GPP_H3 config up from baseboardEdward O'Callaghan
2019-12-25mainboard/google/hatch: Move gpio GPP_C* NC down into baseboardEdward O'Callaghan
2019-12-25mainboard/google/hatch: Move gpio GPP_A* NC down into baseboardEdward O'Callaghan
2019-12-24mainboard/variant/puff: set PL values for puffKangheui Won
2019-12-24mainboard/google/hatch: Remove MAX98357A assumption from baseboardEdward O'Callaghan
2019-12-23mainboard/google/puff: Configure HDA registersEdward O'Callaghan
2019-12-23mainboard/google/puff: Enable func0 of 1c for nicEdward O'Callaghan
2019-12-20mb/google/hatch/var/kindred: Decrease i2c frequency below 400 KHzDavid Wu
2019-12-20mb/google/hatch/var/jinlon: Config WWAN_RESETWisley Chen
2019-12-20mainboard/google/puff: Add extra USB configurationKangheui Won
2019-12-20mainboard/google/puff: Enable pcie7 ep in dtEdward O'Callaghan
2019-12-20mainboard/google/puff: Clean up dt for pci 15.2Edward O'Callaghan
2019-12-19mb/google/hatch: Add mushu variantBob Moragues
2019-12-19mainboard/google/puff: enable emmcKangheui Won
2019-12-12mb/google/hatch/variant/akemi: Increase Goodix touch screen reset delay timePeichao Wang
2019-12-12mb/google/hatch: Add new SKU ID 3 and 4Peichao Wang
2019-12-11mb/goog/hatch/var/dratini: Tune i2c frequency to 400 KHzWisley Chen
2019-12-10mb/google/kohaku: Update TCC offset settingSeunghwan Kim
2019-12-05hatch: Fix FPMCU pwr/rst gpio handlingCraig Hesling
2019-12-05Revert "mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatch"Kane Chen
2019-12-04mb/google/kohaku: Adjust I2C clock frequencySeunghwan Kim
2019-12-04mb/google/hatch/var/akemi: tune DPTF for AkemiPeichao Wang
2019-12-03hatch: Create stryke variantDtrain Hsu
2019-12-02mb/google/hatch/variants/helios: DPTF solution updateKane Chen
2019-11-27mb/google/hatch/var/kindred: Add ELAN touchscreen supportDavid Wu
2019-11-22mb/google/hatch/variant/kohaku: Config MEM_STRAP GPIOsShelley Chen
2019-11-20/mb/google/hatch: Create jinlon variantWisley Chen
2019-11-16kohaku: Set GPP_A10 to NCShelley Chen
2019-11-14/mb/google/hatch/var/dratini: Add new memory supportWisley Chen
2019-11-13mb/google/hatch/variants/helios: Fix leakage voltage problem on touchscreenKane Chen
2019-11-12mainboard/google/hatch: Create helios_diskswap variantAlexis Savery
2019-11-11Helios: Set the reset delay for Goodix touchscreen to 120msShelley Chen
2019-11-08mb/google/hatch/var/akemi: disable unused USB port for Akemi platformPeichao Wang
2019-11-07hatch: Create puff variantEdward O'Callaghan
2019-11-07mb/google/hatch/variants/helios: Modify touchscreen power on sequenceKane Chen
2019-11-05mb/google/hatch/variants/helios: Update TSR3 sensor thresholdsSumeet Pawnikar
2019-11-04mb/google/hatch: update DLL values for KindredJamie Chen
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 05:47:26 +0000