Age | Commit message (Expand) | Author |
2020-11-22 | mb/google/puff/var/dooly: update USB2 type-c strength | Tony Huang |
2020-11-18 | mb/google/hatch/var/ambassador: configure FSP option PcieRpSlotImplemented | Matt Ziegelbaum |
2020-11-18 | mb/google/hatch/var/ambassador: update fan table and tdp config | Matt Ziegelbaum |
2020-11-17 | src: Add missing 'include <console/console.h>' | Elyes HAOUAS |
2020-11-16 | mb/google/hatch/dratini: Describe the privacy_gpio | Ricardo Ribalda |
2020-11-13 | soc/intel/cnl: replace the remains of HeciEnabled by device state in dt | Michael Niewöhner |
2020-11-13 | soc/intel/{skl,cnl}: replace PM ACPI timer dt option by Kconfig | Michael Niewöhner |
2020-11-13 | mb/google/hatch: Configure IRQs as level triggered for HID over I2C | Karthikeyan Ramasubramanian |
2020-11-10 | mb/google/puff/var/dooly: Add WEIDA touchscreen device | Tony Huang |
2020-11-09 | hatch: Create genesis variant | Matt Ziegelbaum |
2020-11-09 | mb/google/hatch/jinlon: Describe the privacy_gpio | Ricardo Ribalda |
2020-11-09 | soc/intel/*/chip: Remove unused devicetree entry | Patrick Rudolph |
2020-11-09 | mb/google/puff/var/dooly: Set default I2C0 frequency | Tony Huang |
2020-11-02 | mb, soc/intel: Reorganize CNVi device entries in devicetree | Furquan Shaikh |
2020-10-29 | hatch: Create ambassador variant | Matt Ziegelbaum |
2020-10-28 | mb/google/nightfury: Set internal pull-down for GPP_D19 | Seunghwan Kim |
2020-10-26 | mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable` | Michael Niewöhner |
2020-10-14 | mb/google/puff/var/dooly: Enable Ambient Light Sensor (ALS) | Tony Huang |
2020-10-13 | mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devices | Furquan Shaikh |
2020-10-13 | mb/google/puff/var/dooly: Update devicetree for audio and display configuration | Tony Huang |
2020-10-13 | mb/google/puff/var/dooly: Update devicetree to remove unused devices | Tony Huang |
2020-10-13 | mb/google/puff/var/dooly: Update devicetree for USB configuration | Tony Huang |
2020-10-13 | mb/google/puff/var/dooly: Update GPIO table for project change | Tony Huang |
2020-10-12 | mb/google/puff: Enable SATA0 on wyvern | Sam McNally |
2020-09-30 | mb/google/puff: Update DPTF parameters for faffy | David Wu |
2020-09-09 | mb/google/puff: Increase DPTF parameters for faffy | David Wu |
2020-09-08 | src/mb/google/hatch: remove "sushi" variant. | Paul Fagerburg |
2020-09-08 | hatch: Create dooly variant | Tony Huang |
2020-09-06 | mb/*: devicetree: drop now unneeded USBx_PORT_EMPTY | Michael Niewöhner |
2020-09-02 | mb/google/puff/var/noibat: Update DPTF parameters for noibat | Wisley Chen |
2020-09-02 | mb/google/puff: Update DPTF parameters and TCC offset for faffy | David Wu |
2020-09-01 | mb/google/puff: Update DPTF parameters for kaisa and duffy | David Wu |
2020-09-01 | mb/google/puff: Convert ASL file to new DPTF dt impl | Edward O'Callaghan |
2020-08-31 | mb/google/puff: Set TCC offset to 5 for kaisa and duffy | David Wu |
2020-08-27 | mb/google/puff: Update psyspl2 to 97% of adapter rating | David Wu |
2020-08-23 | soc/intel/cnl: Configure FSP option PcieRpSlotImplemented | Nico Huber |
2020-08-18 | src: Remove unused 'include <delay.h>' | Elyes HAOUAS |
2020-08-07 | soc/intel/cnl: Set Heci1Disable depending on devicetree config | Felix Singer |
2020-08-06 | mainboard/google/puff: Remove second temp sensor | Andrew McRae |
2020-08-04 | mb/**/{devicetree,overridetree}.cb: Indent with tabs | Angel Pons |
2020-07-27 | mb/google/hatch: Add smart battery I2C passthrough for Dratini | Tim Wawrzynczak |
2020-07-26 | src: Remove extra lines in license header | Elyes HAOUAS |
2020-07-20 | mb/google/puff: update USB3 gen2 parameters | Tim Chen |
2020-07-14 | mb/hatch: Fix Puff baseboard missing mainboard symbols | Edward O'Callaghan |
2020-07-14 | mb/google/hatch: Set SA slow slew rate to 1/2 for jinlon/dratini | Wisley Chen |
2020-07-03 | mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in Wyvern | Edward O'Callaghan |
2020-07-03 | mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in Noibat | Edward O'Callaghan |
2020-07-03 | mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in Faffy | Edward O'Callaghan |
2020-07-03 | mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in Kaisa | Edward O'Callaghan |
2020-07-03 | mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in Duffy | Edward O'Callaghan |
2020-07-02 | mb/google/faffy: update DPTF parameters | Tim Chen |
2020-07-01 | mb/google/nightfury: Override VBT selection for nightfury 2nd sku | Seunghwan Kim |
2020-06-30 | mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in dt | Edward O'Callaghan |
2020-06-28 | mb/google/faffy: Enable USB2 port6 | Tim Chen |
2020-06-28 | gpio_keys: Allow boards to configure different wakeup routes | Furquan Shaikh |
2020-06-26 | Revert "Mushu: Enable PCIe 1d.4 to enable dgpu" | Shelley Chen |
2020-06-26 | mb/google/hatch: Set Reset Power Cycle Duration for hatch platforms | Sridhar Siricilla |
2020-06-23 | hatch: Create wyvern variant | Paul Fagerburg |
2020-06-23 | hatch: Create faffy variant | Edward O'Callaghan |
2020-06-23 | palkia: separate the gpio pins control for the second touch | Zhuohao Lee |
2020-06-23 | mb/google/hatch: Make puff and variants share common mainboard.c | Edward O'Callaghan |
2020-06-22 | mb/google/hatch: Make puff and variants share common dptf.asl | Edward O'Callaghan |
2020-06-22 | mb/google/hatch: Make puff and variants share common ec.h | Edward O'Callaghan |
2020-06-17 | mb/google/hatch: mushu: Add F75303 temp sensor to dptf | Puthikorn Voravootivat |
2020-06-17 | mb/google/puff: add MST and LSPCON details to variants devicetree | Shiyu Sun |
2020-06-14 | mb/google/puff: add MST and LSPCON details to devicetree | Shiyu Sun |
2020-06-14 | mb/google/hatch/vr/puff: Set up PL2 and PsysPL2 | Tim Chen |
2020-06-14 | mb/google/hatch: Switch USB2 port1 and port3 on Noibat | Edward O'Callaghan |
2020-06-12 | mb/google/hatch: Remove unused USB2 port from Noibat | Edward O'Callaghan |
2020-06-12 | mb/google/puff: Update i2c[2] and i2c[3] rise and fall times | Sam McNally |
2020-06-09 | mb/google/hatch/vr/puff: Set up PL2 and PsysPL2 | Gaggery Tsai |
2020-06-02 | src: Remove unused 'include <bootstate.h>' | Elyes HAOUAS |
2020-06-01 | mb/google/hatch: Add Noibat variant | Edward O'Callaghan |
2020-05-28 | Remove new additions of "this file is part of" lines | Elyes HAOUAS |
2020-05-26 | mb/google/nightfury: Enable max98390 amp | Seunghwan Kim |
2020-05-26 | Mushu: Enable PCIe 1d.4 to enable dgpu | Shelley Chen |
2020-05-26 | cannonlake: update processor power limits configuration | Sumeet R Pawnikar |
2020-05-26 | intel/cannonlake: Implement PCIe RP devicetree update | Nico Huber |
2020-05-18 | mb/google/hatch: Add Mushu variant specific DPTF parameters | John Su |
2020-05-18 | src: Remove leading blank lines from SPDX header | Elyes HAOUAS |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-05-09 | src/: Replace GPL boilerplate with SPDX headers | Patrick Georgi |
2020-05-02 | acpi: Move ACPI table support out of arch/x86 (3/5) | Furquan Shaikh |
2020-05-01 | mb/google/hatch/vr/puff: Add psys_pmax calculation | Tim Chen |
2020-05-01 | Helios: Update DPTF settings for smooth fan speed control | Sumeet R Pawnikar |
2020-05-01 | mb/google/nightfury: Tune the usb2_port[0] strength | Seunghwan Kim |
2020-04-30 | mb/google/puff: update USB2 strength | Tim Chen |
2020-04-27 | mb/google/hatch/var/jinlon: Update DPTF parameters | Wisley Chen |
2020-04-25 | mb/google/hatch/var/jinlon: Tune i2c frequency under 400 KHz | Wisley Chen |
2020-04-24 | mb/google/hatch: Change baseboard EC wake & SCI masks to match kohaku | Tim Wawrzynczak |
2020-04-24 | mb/google/hatch: Add Duffy variant specific DPTF parameters | Edward O'Callaghan |
2020-04-24 | mb/google/hatch: Add Kaisa variant specific DPTF parameters | Edward O'Callaghan |
2020-04-23 | mb/google/puff: Switch USB2 port1 and port3 | Tim Chen |
2020-04-22 | mb/google/puff: comment schematics changes for USB | Kangheui Won |
2020-04-21 | mb/google/puff: configure USB PLD groups | Peter Marheine |
2020-04-20 | security/vboot, mb/google: Fix build errors | Patrick Georgi |
2020-04-20 | mb/google/hatch/vr/puff: Add psys_pmax calculation | Gaggery Tsai |
2020-04-20 | google/chromeec: Revise parameters of EC USB PD API call | Gaggery Tsai |
2020-04-16 | mb/google/hatch/var/kindred: Override VBT selection for kled | David Wu |
2020-04-16 | mb/google/puff: Add variant specific DPTF parameters | Tim Chen |