aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants
AgeCommit message (Collapse)Author
2020-04-24mb/google/hatch: Change baseboard EC wake & SCI masks to match kohakuTim Wawrzynczak
1) Allows MKBP events from the EC to wake the system from suspend states. 2) Remove EC_HOST_EVENT_MKBP from the EC_SCI_EVENTS mask, so that MKBP events don't generate an SCI. The EC is also being changed to use host events to wake up the system, and use the EC_INT_L line for MKBP IRQ signalling. Otherwise, there would be two IRQs generated for MKBP events. BUG=b:148976961 BRANCH=firmware-hatch-12672.B TEST=Verify MKBP events wake system TEST=Verify MKBP IRQs are run Change-Id: I8420a996cb1975007cbbbefe9e2f8f1fca91b666 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com>
2020-04-24mb/google/hatch: Add Duffy variant specific DPTF parametersEdward O'Callaghan
Copy over DPTF parameters from Puff. BUG=b:153589525 BRANCH=none TEST=none Change-Id: Ic619826205be06f30055fbbc537f3d302dd039bd Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40423 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-24mb/google/hatch: Add Kaisa variant specific DPTF parametersEdward O'Callaghan
Copy over DPTF parameters from Puff. BUG=b:153589525 BRANCH=none TEST=none Change-Id: I7270db1283a9c0ee4746da038020e432aeb6dc5e Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40422 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-23mb/google/puff: Switch USB2 port1 and port3Tim Chen
Switch USB2 port1 and port3 for duffy and kaisa due to circuit change. BUG=b:153682207, b:154451230, b:154445635 BRANCH=None TEST=emerge-puff coreboot chromeos-bootimage boot on puff board Change-Id: I9c0cbcbefd045085fb70cf4f41869ab9b98103c4 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-04-22mb/google/puff: comment schematics changes for USBKangheui Won
USB routing has changed on reference schematics after Puff rev1 has built. This may confuse people trying to c&p devicetree from the Puff. So add comment to clearly note that there was change, hopefully preventing c&p errors. BUG=b:153682207 BRANCH=None TEST=None Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I5c43a5c04c81b6708c9eeabc48ef11961d7c8561 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40546 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-21mb/google/puff: configure USB PLD groupsPeter Marheine
Each physical port should have the same group and position for both USB2 and USB3, but puff and its variants use different layout than the baseboard so they must override PLD. Ports are split into two groups for front and back, with positions in each group numbered from left to right. BUG=b:151579409 BRANCH=none TEST=PLD_GroupToken and PLD_GroupPosition are set as expected in SSDT. Change-Id: Ibe19e4faa1fbc7117687d789e9bd5584852a48c0 Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-20security/vboot, mb/google: Fix build errorsPatrick Georgi
There have been two cases of incompatibilities between overlapping changes, and they need to be resolved in a single commit to unbreak the tree: 1. CB:40389 introduced a new use of write_secdata while CB:40359 removed that function in favor of safe_write. Follow the refactor of the latter in the code introduced by the former. 2. CB:39849 changed google_chromeec_get_usb_pd_power_info()'s interface and adapted all its users. Except for duffy and kaisa which were only added in CB:40223 and CB:40393 respectively, so reapply the patch to puff's mainboard.c to their mainboard.c files. Change-Id: Ib8dfcd61bb79e0a487eaa60e719bd93561f2d97a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-04-20mb/google/hatch/vr/puff: Add psys_pmax calculationGaggery Tsai
This patch adds psys_pmax calculation. There are two types of power sources. One is barrel jack and the other is USB TYPE-C. The voltage level is fixed for a barrel jack while TYPE-C may vary depending on power ratings. We need to get voltage information from EC and calculate correct psys_pmax value. The psys_pmax needs to be set before FSP-S since FSP-S will handle the setting passing to pcode, so move the routine ahead to variant_ramstage_init. BUG=b:151972149 TEST=emerge-puff coreboot chromeos-bootimage check firmware log and ensure psys_pmax is passed to FSP check the data from dump_intel_rapl_consumption in the OS and ensure the power data is close to an external power meter. Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Change-Id: I8ea01f856411e05a533489280fc2b4a46a1440c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-20google/chromeec: Revise parameters of EC USB PD API callGaggery Tsai
This patch adds voltage and curent parameters in google_chromeec_get_usb_pd_power_info and remove power parameter. Caller could use the voltage and current information to calculate charger power rating. The reason for this change is, some applications need the voltage information to calculate correct system power eg PsysPmax. BUG=b:151972149 TEST=emerge-puff coreboot; emerge-fizz coreboot Change-Id: I11efe6f45f2f929fcb2763d192268e677d7426cb Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-16mb/google/hatch/var/kindred: Override VBT selection for kledDavid Wu
Override VBT to fix CRC error issue with psr2 panel for kled. Cq-Depend: chrome-internal:2877637 BUG=b:145963505 BRANCH=hatch TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-bootimage Change-Id: If201d449e910f80dc514c142aec4808a44fa31a9 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-04-16mb/google/puff: Add variant specific DPTF parametersTim Chen
Modify DPTF parameters for OEM EVT build from thermal team. BUG=b:153589525 BRANCH=None TEST=emerge-puff coreboot chromeos-bootimage and boot on puff board Change-Id: I36db172e4d2ccc854856641c510cff9fe04ea235 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-15mb/google/hatch: Add Kaisa variantAndrew McRae
A verbatim copy of variants/puff V.2: rebased on duffy. BUG=b:152951180 BRANCH=none TEST=none Change-Id: I7ea28e96c8b6867e17097a8bfab848928195654d Signed-off-by: Andrew McRae <amcrae@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2020-04-15mb/google/hatch: Add Duffy variantEdward O'Callaghan
A verbatim copy of variants/puff. BUG=b:152951181 BRANCH=none TEST=none Change-Id: I9ac262bba60a8d0059722e947ed1b47dddb94f55 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40223 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-15mb/google/puff: Fix up WLAN_OFF gpio configurationEdward O'Callaghan
BUG=b:152927525 BRANCH=none TEST=builds Change-Id: I691377624c870eb0fc6f7e84a4b9cd50b7b09654 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2020-04-15mainboard/puff: Tune ALC5682I rise_fall times on i2cEdward O'Callaghan
Tunes the headphone amp i2c with measured signal shape. BUG=b:147192377 BRANCH=none TEST=builds and measured i2c frequency below 400khz Change-Id: I60f73bcf60ed140f595c953be371b982a63f7b95 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-14mb/google/nightfury: Update tdp_pl1_override valueSeunghwan Kim
Update tdp_pl1_override value to 15W for CML-U based nightfury platform. BUG=None BRANCH=firmware-hatch-12672.B TEST=Built Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: Ib0155b961b9d304bed2e9456c4964ebd598af4dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/40323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-04-14mb/google/hatch: Use tabs for alignmentPaul Menzel
Change-Id: I38d429245810f64a03253b5076391af843f8d0de Fixes: e2ac5b7a36 ("mb/google/hatch/variants: Add DPTF based Fan control") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-07mb/google/nightfury: Update DPTF parametersSeunghwan Kim
Apply initial DPTF parameters for nightfury from internal thermal team. Will update after further thermal/performance tuning. BUG=b:149226871 BRANCH=firmware-hatch-12672.B TEST=built and verified FAN worked by DPTF active policy Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I712bdd8edc999ef7ee33f4adf21893be12e86bec Reviewed-on: https://review.coreboot.org/c/coreboot/+/40115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-06mb/google/hatch: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: If85e246550abe323d6a2a7c6301e8e91858cbe3a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-30mb/google/kohaku: Add enable_delay_ms for wacom penEvan Green
Add an enable reset delay to avoid messages like this in the kernel: i2c_hid i2c-WCOM50C1:00: failed to change power setting. This gets rid of all the warnings except one on reboot/shutdown. That last case likely isn't fixed because the sleep command is being sent directly from i2c_hid_shutdown(), so no ACPI routines get to run and provide the delay. Since the machine is going down for shutdown/reboot anyway, fixing that last case is a lower priority. BUG=b:145094539 TEST=Run on kohaku, switch to guest mode and log out, no errors Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I8fadf497dd09e5b95b1d74443fb0543d3555dbb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-30mb/google/hatch/var/kindred: set wifi sar for kledDavid Wu
Enable wifi sar feature and set wifi sar name for kled sku. BUG=b:152277272 TEST=emerge-hatch coreboot chromeos-bootimage and verify wifi SAR load by sku-id Change-Id: I9ee242773fd05cc2bcd7bde07da8176022827677 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-03-29hatch: Create sushi variantPaul Fagerburg
Create the sushi variant of the hatch reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 3.0.0). BUG=None BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_SUSHI Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: Ie900d09ff55e695527eafe68a5a75cd4a0b6d340 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-03-26mb/google/hatch/variants/nightfury: Replace unneeded white spaces by tabsElyes HAOUAS
Change-Id: Icda241cfac7b428176515d7996a48cb01b1dc976 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39815 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26drivers/net/r8168: Fix ethernet_mac[0-9] format for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. Adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn V.2: Fixup a code comment typo while we are here. V.3: Vary special casing semantics for idx==0 => default mac addr is set. V.4: Rework to still support the legacy path. BUG=b:152157720 BRANCH=none TEST=none Change-Id: Idf83cc621a9333186dabb668b22c4b78e211930a Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-24mb/google/hatch: Give first NIC in Puff idx 1 for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. drivers/net supports this with the workaround of setting the idx to 1. The longer term fix is to adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn BUG=b:152157720 BRANCH=none TEST=none Change-Id: I510428c555b92398a5199b346dffb85d38495d74 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
Add HID field in max98357a_config and allow mainboards to set it. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-20mb/google/nightfury: Update overridetree.cbSeunghwan Kim
Updating devicetree to enable ELAN touchpad and ELAN touchscreen on nightfury BUG=none BRANCH=firmware-hatch-12672.B TEST=built and verified touchpad and touchscreen worked Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Ieba6558ce3897ce2f95f51ed667465d84b4ab189 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I09cc279b1f75952bb397de2c3f2b299255163685 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-15mb/google/hatch: Create palkia variantKane Chen
Add Palkia as a variant of Hatch. BUG=b:150254194 BRANCH=none TEST=none Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I6a303d9fc2be9ea358ad66cd648738187c974193 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38860 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-12mb/google/hatch: Create nightfury variantraymondchung
Create new variant and build for nightfury. BUG=b:149226871 TEST=FW_NAME="nightfury" emerge-hatch coreboot chromeos-bootimage Change-Id: If08692f4a2d216c57499098cc0e35abd708d99d4 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2020-03-11mb/google/puff: Enable cros_ec_keyb deviceKangheui Won
This is required to transmit button information from EC to kernel. BUG=b:150830342 BRANCH=None TEST=firmware_ECPowerButton test passes on puff Change-Id: I10ba9d55e8997ce2412deb0613cfcaa8f24f271d Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-03-02mb/google/kohaku: Add LPDDR 16G 2133 supportSeunghwan Kim
BUG=b:149775711 BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: I856d7b361e70b657966cd4036c79f2fedfabb766 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39126 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-02mb/google/hatch/var/jinlon: Disable EPS on some SKUsRajat Jain
Disable EPS on the SKUs that do not have it. Change-Id: I7305097beea3484634933ab856fd084933868a10 Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-03-02mb/google/hatch/var/jinlon: Enable gfx/generic driverRajat Jain
Enable the GFX device for Jinlon. Change-Id: I6ba90bf464e315ec364b6f35e7670924a2aba25a Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-02-28mainboard/google/hatch/puff: Toggle on TetonGlacierModeEdward O'Callaghan
Leverage in Puff to avoid diskswap variants. Later this could become part of the baseboard definition and hatch diskswap variants migrated over to use it as well. BUG=b:149171631 BRANCH=none TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration on Puff. Change-Id: Ie87f0823f28457db397d495d9f1629d85cfd5215 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-28mainboard/google/hatch: Migrate onto SKU ID helpersEdward O'Callaghan
Leverage the common sku id space helper encoders. BUG=b:149348474 BRANCH=none TEST=tested on hatch Change-Id: I96e10010fd375b127f1e10387d6f7a839bc35fdd Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39019 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-27mb/google/hatch/var/jinlon: Configure GPP_E0 as outputRajat Jain
Configure GPP_E0 as output for view angle management Change-Id: Iad640eed855b47e365da55fa994c6a3c4c38caf9 Signed-off-by: Rajat Jain <rajatja@google.com>. Reviewed-on: https://review.coreboot.org/c/coreboot/+/39144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-26mb/google/hatch: reflow commentPatrick Georgi
Change-Id: I8c721c7ccba4f87d4acb9dae74213a46151fe2ed Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-26mainboard/hatch: Fix GPE wake commentsEdward O'Callaghan
The indirection of names is exceedingly confusing for ultimately the single interrupt trace of EC_PCH_WAKE_ODL between the EC gpio#74 to GPD2/LAN_WAKE# on the PCH side. This helps folks chase this indirection down through the code. BUG=b:147026979 BRANCH=none TEST=builds Change-Id: I35d746a202dae06d2f6f1edfaa3889864b09f50d Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-17Revert "mb/google/hatch: Override CPU flex ratio"Tim Wawrzynczak
This reverts commit a017e5fb3dda5ea6bbc94ee15b2e981eeaa2d918. Reason for revert: The extra reset in the FSP after the flex ratio is changed causes recovery reasons to be lost. There are some vboot changes that recently landed that could help with this issue, but for now, we are working on a new AU image for Kohaku and this is causing our automated testing to fail. Change-Id: Ic38b390842e2a533033587b3247b7c8d982b1dff Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-07mainboard/hatch: Fix puff DP output on cold bootsEdward O'Callaghan
Wait for HPD DP unless HDMI is plugged. Some Type-C monitors do not immediately assert HPD. If we continue to boot without HPD asserted, Depthcharge fails to show pictures on a monitor even if HPD is asserted later. Similar to that of b:72387533 however our DP&HDMI are beind a MST. See commit d182b63347c744c on how this was done for mainboard/fizz. BUG=b:147992492 BRANCH=none TEST=Verify firmware screen is displayed even when a type-c monitor does not immediately assert HPD. Verify if HDMI monitor is connected, AP does not wait (and firmware screen is displayed on HDMI monitor). Change-Id: I19d40056e58f1737f87fd07d62b07a723a63d610 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2020-02-06mb/google/hatch: Add noise mitigation setting for dratini/jinlonWisley Chen
Enable acoustic noise mitigation, the slow slew rates are fast time divided by 8 and disable Fast PKG C State Ramp (IA, GT, SA). BRANCH=hatch BUG=b:143501884 TEST=build and verify that noise reduce. Change-Id: I65f47288a7b1da98296fdba87ab5ca0c3a567aaf Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38212 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-05mb/google/hatch: Correct PCIe ports setting for mushuAmanda Huang
1. Enable PCIe port for dGPU 2. Change WLAN PCIe port from port 14 to port 7 BUG=b:147249494 TEST=Ensure dGPU and WLAN shows up with lspci. Change-Id: Iea3292be7d8029c35847118228bbb773418632a1 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38399 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-04mb/google/hatch: Enable Audio DSP oscillator qualification for S0ixAamir Bohra
BUG=b:139481313 Change-Id: I1a0911b7967e5823fdce98195420728bd38c80f6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-04mb/google/puff: Enable HECI communicationJamie Chen
Set HeciEnabled = 1 on puff device tree to turn on Intel ME communication interface. BUG=b:143232330 BRANCH=None TEST=Build puff and boot up OS. ran lspci and confirmed there is a HECI device. 00:16.0 Communication controller: Intel Corporation Device 02e0 Change-Id: I2debb885022ae31e395869d014a91824b5dd980c Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-02-01hatch/mushu: Fix FPMCU pwr/rst gpio handlingCraig Hesling
Asserting reset in RO instead of in RW has no impact on security or performance, but it does limit improvements to this process later. This fix removes reset line control from RO and makes these variants consistent with other hatch variants. This fix reinforces the concept from commit fcd8c9e99e (hatch: Fix FPMCU pwr/rst gpio handling). BUG=b:148457345 TEST=None Change-Id: I12dc0c3bead7672e2d3207771212efb0d246973a Signed-off-by: Craig Hesling <hesling@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-02-01mb/google/hatch/variants/mushu: Enable dGPU BOMACO modeAmanda Huang
Configure GPP_H22 as output pin for BOMACO mode enabled. BOMACO stands for "Bus Off Memory Alive Core Off". BUG=b:146081272 TEST=emerge-mushu coreboot Change-Id: Ic35e55771d76b7254bcb457fcb38f37433b9ad67 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38210 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/google/hatch: Modify kohaku's EC_SCI_EVENTS maskTim Wawrzynczak
Remove EC_HOST_EVENT_MKBP from kohaku's EC_SCI_EVENTS mask, so that MKBP events don't generate an SCI. The EC is also being changed to use host events to wake up the system, and use the EC_INT_L line for MKBP IRQ signalling. Otherwise, there would be two IRQs generated for MKBP events. BUG=b:144122000 BRANCH=firmware-hatch-12672.B TEST=System shows ACPI interrupt as the wakeup IRQ, and the MKBP host event is properly processed as well. Change-Id: I9ff964e38e66ccb953a1adad5a936a9da6e4f3a1 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38654 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/google/hatch: Override CPU flex ratioSubrata Banik
This patch overrides CPU flex ratio on hatch in order to get better boot time numbers in vboot_reference. BUG=b:142264107 TEST=Able to save ~100ms of platform boot time while running with lower cpu flex ratio (i.e. freq ~1500MHz) Without this CL 1100:finished vboot kernel verification 802,443 (148,108) With this CL 1100:finished vboot kernel verification 685,382 (46,496) Change-Id: Idd1d1c0c04b1f742f17227a1335f27a956ee940d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36865 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-30mainboard/google/hatch: Fix Puff _PR to toggle NIC ISOLATE# for S0ixEdward O'Callaghan
Turns out when going into S0ix we want the kernel to toggle de-assert to 0 for the ISOLATE# pin on the NIC for S0ix not to be woken by PCIe traffic on PCH. Upon resume the ISOLATE# pin on the NIC is then re-asserted for it to become lively again. BUG=b:147026979 BRANCH=none TEST=Boot puff and do 1500 cycles of S0ix. Change-Id: I3470e1edd93b461b66fc6444541a64339bcdcce3 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38523 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-27mainboard/google/hatch: Set GPP_C7 as the wake pin for the NIC on PuffSam McNally
BUG=b:148252157 BRANCH=none TEST=Put a puff in s0ix, send a WoL magic packet. Change-Id: I4a08a2f5505d00909c9301315fcf72f687141f91 Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-22mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
1. Add a TEMP_SENSOR3 2. Update DFPS (fan performance state) table with values received from thermal team 3. Update PL1 override to 15W 4. Update PL2 override to 51W BRANCH=hatch BUG=b:147792204 TEST=build and verify by thermal team Change-Id: I21c17c09a097c963f4dd1b7d5f8212c83a639dc3 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38025 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22mb/google/hatch: Kohaku: Add MKBP to suspend wake eventsTim Wawrzynczak
This CL allows MKBP events from the EC to wake the system from suspend states. BUG=b:144122000 BRANCH=firmware-hatch-12672.B TEST=Verify that MKBP events generated from EC will wake the system from S0ix. Change-Id: I8a0d2c7ed89fa1ea937a08c3082cc5d3e782efff Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-21mb/google/puff: Add ac/dc loadline configuationsJamie Chen
According to VRTT report, add ac/dc loadline configuations in puff device tree. BUG=b:147206535 BRANCH=None TEST=build coreboot and fsp with enabled fw_debug. Flashed to puff and checked the log. All ac/dc loadline configs were set correctly. Change-Id: Ia806de23a1fefcaac3ce9a462a8a04eee5eabcae Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-21mb/google/hatch/var/jinlon: Remove DPTF fan controlWisley Chen
Jinlon will use EC to control fan, so remove DPTF fan control. BUG=b:141259174 TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I8ada4fe72eee260fecf45d00510da8b91e3f10a4 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-21mainboard/hatch: Fix puff USB ACPI names and typesEdward O'Callaghan
Fix devicetree to advertise the correct USB names and types in the generated ASL. BUG=b:146437991 BRANCH=none TEST=booted and inspected the reported generated ASL. Change-Id: I133b4db444f9a5f0a36d8e976ae490f24cf307d8 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-01-18mainboard/google/puff: update SATA strengthTim Chen
Base on SATA SI report to fine tune the strength for port 1. BRANCH=none BUG=b:147351936 TEST=build and test SATA port works fine. Change-Id: Ib82b7e5df32b4ce794682781f33c44dfeb6e68bf Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-18mainboard/google/puff: update USB configurationJamie Chen
Base on USB SI report to fine tune the strength and correct some OC pin settings. BRANCH=none BUG=b:147206010 TEST=build and test all usb ports function work fine. Change-Id: Idbee5cdddf3a83f97109214a95e0f9875b3b3f8f Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-18mainboard/puff: Fix ACPI tables to advertise correct featuresEdward O'Callaghan
Provide Puff with it's own copy of ec.h copied from the baseboard/includes however with the battery, lid and ps2 defines stripped. This is to ensure the correct ASL is generated so that we don't advertise PS2 keyboard support and battery/lid interrupts which don't exist. V.2: drop EC_ENABLE_ALS_DEVICE as well. V.3: set MAINBOARD_EC_SMI_EVENTS to 0 and drop EC_HOST_EVENT_LID_CLOSED smi event. V.4: drop EC_HOST_EVENT_MODE_CHANGE && provide wake pin for EC for _PRW WoL method V.5: drop EC_HOST_EVENT_KEY_PRESSED BUG=b:147850335 BRANCH=none TEST=builds Change-Id: If13bd124c7229ced996efb841980604d13be09af Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-16/mb/google/hatch/variants/helios: Remove MAX98357A devicetree entryKrishna Prasad Bhat
Helios does not have MAX98357A speaker amplifier, so remove the devicetree entry. BRANCH=firmware-hatch-12672.B Change-Id: Id02410553f018385d407086b2f9bc3ee1e7a5f40 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@google.com>
2020-01-10mb/google/hatch/variants/helios: Modify DPTF parametersKane Chen
Modify DTRT CPU Throttle Effect on TSR0 change to TSR3. BUG=b:131272830 BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I5b4645d7552e795a33c1b86d95c4061da71c65bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/38299 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-08mb/google/hatch: Remove fixed IccMax valuesJamie Chen
Remove fixed IccMax values for all domains. IccMax will be selected by CPU SKU in fill_vr_domain_config function. BUG=b:145094963 BRANCH=None TEST=build coreboot and fsp with enabled fw_debug. Flashed to device and checked the log. Signed-off-by: Jamie Chen <jamie.chen@intel.com> Change-Id: I3f623d143f66c4f6ec63705844c9be7173feeb52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-03mainboard/google/puff: Clean up pcie 15.3 ep in dtEdward O'Callaghan
Clean up devicetree as nothing special is needed here. BUG=b:142769041 BRANCH=none TEST=builds Change-Id: I0790631233fdcaa6a785d2cb41e79b8f2f469d44 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-01-02mainboard/google/puff: Enable net driver on pcie epEdward O'Callaghan
Let coreboot know there is a NIC device on the end so that the mac from vpd is set at early boot. Properly configure the link-leds in devicetree s.t. valid values are written out to the register at initialization. BUG=b:146592075,146999042,146999043 BRANCH=none TEST=Boot to kernel. Insert mac address into VPD vpd -s ethernet_mac=<address> reboot the system. Ensure we have ip address and corresponding mac address with ifconfig. Ensure ethernet controller shows up with lspci. Change-Id: I76ce6d8a5a26842fcb2544ee96567fe0da8603b1 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-12-31mb/google/hatch/akemi: modify DPTF parameters for new FANPeichao Wang
New FAN use NTN bearing, so tune DPTF parameters to satisfy requirement BUG=b:144370669 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6fbf0c80cd2421ce9a489c8923a97d860a11b545 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-27mb/google/kohaku: Update reset_delay_ms for digitizer deviceSeunghwan Kim
We found the driver binding failure issue could be cleared with 100ms of "reset_delay_ms". Needs further check with device vendor, anyway it seems the IC need some time before communication after de-assertion of reset. BUG=b:129159369 BRANCH=firmware-hatch-12672.B TEST=Verified driver bound successfully. Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Iccb33c13c9a390a2c971325c74c0c4ad4b08618e Reviewed-on: https://review.coreboot.org/c/coreboot/+/37911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-27mb/google/hatch/var/dratini: Add a new sku for dragonairWisley Chen
Add a new sku for dragonair BUG=b:146504217 TEST=emerge-hatch coreboot Change-Id: I4492d65f35d3583df1606c5f2901228b3ae14e4a Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-26mb/google/hatch/akemi: Set touchpad data hold time more thanPeichao Wang
300ns According to SI team and vendor request, need to tune I2C bus 0 data hold time more than 300ns BUG=b:146163044 TEST=build firmware and measure I2C bus 0 data hold time Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I75e33419cbaef746487de6ee8628d07cf08adaa9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37322 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26hatch: Fix FPMCU pwr/rst gpio handling for dratini/jinlonWisley Chen
In https://review.coreboot.org/c/coreboot/+/37459 (commit fcd8c9e99e7f70e2b9494f2fa28a08ba13126daa) which moves power/reset pin control of FPMCU to var/board/ramstage, but does not implement it for dratini/jinlon. So, add it in dratini/jinlon. BUG=b:146366921 TEST=emerge-hatch coreboot Change-Id: I1b6dbe4ba0a1242aa64346410beed4152b4f457f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37833 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/hatch/var/jinlon: Update DPTF parametersWisley Chen
The change applies the DPTF parameters received from the thermal team. BUG=b:146540028 TEST=build and verified by thermal team. Change-Id: I222bac5f04ba5cdde1788c6d4ca8af80d323ca98 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-25mainboard/google/puff: Add GPIO configurationEdward O'Callaghan
BUG=b:144809606,142094759 BRANCH=none TEST=none Change-Id: Iae20d2262c910044dde84f10d795f4aee3318532 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Kangheui Won <khwon@chromium.org> Co-Author: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37925 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25mb/google/hatch/variant/kohaku: Fix Kohaku baseboard/gpio.c mux commentsEdward O'Callaghan
Follow MEM_STRAP_* comment style to be consistent with other boards. BUG=b:144809606 BRANCH=hatch TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I4945f676f307af9b8c0baa1fbcaf33113de647c3 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37592 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25mainboard/google/hatch: Move gpio GPP_H3 config up from baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_H3 gpio config for easier review. This toggles the MAX amp which not all boards have. Move the pin configuration to boards with the respective devicetree configuration following on from the theme of commit b417786525. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: Iefd2223af79a13c8a42d07bc10b2772dbff6d3e5 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25mainboard/google/hatch: Move gpio GPP_C* NC down into baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_C15 group for easier review. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: I578245e24895d361d80ad016a4f18204e2b6e1ca Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25mainboard/google/hatch: Move gpio GPP_A* NC down into baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_A* group for easier review. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: I29b4323ac80b1288b2562846217c4f377714fc2c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-24mainboard/variant/puff: set PL values for puffKangheui Won
To be safe for now, don't differentiate between SKUs and use lower values to ensure board won't be browned out. BUG=b:143246320 TEST=none BRANCH=none Change-Id: I041ebaa33bf2582386198290e625099ba8e2f3c9 Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37651 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-24mainboard/google/hatch: Remove MAX98357A assumption from baseboardEdward O'Callaghan
Generally work towards a more loose baseboard definition by moving out some original assumptions to be board specifics. Specifically Puff does not have the MAX98357A speaker amp and enabling the driver winds up generating incorrect SSDT tables that confuse the kernel. Since devicetree inherits the chip from device node in base and an override will also inherit the chip and thus dispatch the unwanted fill_ssdt fn call. V.2: lean on linker to drop max98357a driver when not in dt. BRANCH=none BUG=b:146519004 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I8e7fed69a4c6d9610ac100da6bae147828ebfa81 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37909 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-23mainboard/google/puff: Configure HDA registersEdward O'Callaghan
Enable PCH HDA and configure dmic+ssp registers. BRANCH=none BUG=b:146519004 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: If9495261201ca256cdb35352338c0b3a82a50196 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-12-23mainboard/google/puff: Enable func0 of 1c for nicEdward O'Callaghan
Two things here: i. ) FSP requires that function 0 be enabled whenever any non-zero functions hang under the same bus:device. ii.) FSP reorders function 6 RP to be function 0 if function 0 is indeed unused. BUG=b:146437819 BRANCH=none TEST=none Change-Id: I0f499a23495e18cfcc712c7c96024433a6181a4c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-20mb/google/hatch/var/kindred: Decrease i2c frequency below 400 KHzDavid Wu
Before tuning i2c frequency, I2C0: 479.4 KHz I2C1: 491.4 KHz I2C4: 476.4 KHz After tuning i2c frequency, I2C0: 391.8 KHz I2C1: 396.4 KHz I2C4: 388.8 KHz BUG=b:146535585 BRANCH=hatch TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I55d095efb60eba4e860b54bb90e8e0df62d88419 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37831 Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20mb/google/hatch/var/jinlon: Config WWAN_RESETWisley Chen
jinlon supports LTE, so remove WWAN_RESET NC configuration BUG=none TEST=emerge-hatch coreboot Change-Id: Ibc5d21f0a33952f519265a5ce2df559a79346d9e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37837 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20mainboard/google/puff: Add extra USB configurationKangheui Won
Adding extra USB configuration since Puff has different USB ports compared to hatch BRANCH=none BUG=b:146437609 TEST=none Change-Id: I42ef6b6b718274953711c84ebe90971f108501fa Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-12-20mainboard/google/puff: Enable pcie7 ep in dtEdward O'Callaghan
Missing bus init for RTL8111H ethernet chip hanging on bus. V.2: Include admendments from Kangheui. BRANCH=none BUG=b:146437819 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I22aba312f183ea05eeb81d326ca0c05ce340a2e8 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-20mainboard/google/puff: Clean up dt for pci 15.2Edward O'Callaghan
Seems nothing special is needed here from coreboot. V.2: Fix typo as well in speed map. BRANCH=none BUG=b:143047058 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: Ief750f98677b2017af78fb0b5bc98e1492dedbe4 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-19mb/google/hatch: Add mushu variantBob Moragues
Create initial overlays and build for mushu Signed-off-by: Bob Moragues <moragues@chromium.org> Change-Id: I81b5bf960ead0463159ac35f4f96e3ccc8c0364e Reviewed-on: https://review.coreboot.org/c/coreboot/+/37645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-19mainboard/google/puff: enable emmcKangheui Won
enable eMMC in puff/overridetree.cb BRANCH=none BUG=b:146455177 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I432f437e0c9a618bbbf76d22976ea757c8fbdb83 Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-12-12mb/google/hatch/variant/akemi: Increase Goodix touch screen reset delay timePeichao Wang
Confirmed with Goodix team, so increase reset delay time from 120ms to 150ms. BUG=b:144267684 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I4ff95ac89314fc031620ca28e4f6e6e26cdef3f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37544 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12mb/google/hatch: Add new SKU ID 3 and 4Peichao Wang
1. SKU ID 1 and 3 for eMMC 2. SKU ID 2 and 4 for SSD BUG=b:144815890 BRANCH=firmware-hatch-12672.B TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-bootimage Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I25f0c4142be024ba55f671491601d1f6ec26d68a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37498 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11mb/goog/hatch/var/dratini: Tune i2c frequency to 400 KHzWisley Chen
Tuning i2c frequency for dratini: I2C0: 396 KHz I2C1: 398 KHz I2C3: unused I2C4: 394 KHz BUG=b:145891557 BRANCH=hatch TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I1431554fbce5f3ce113ef1a934e39448e7ba321c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37605 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-10mb/google/kohaku: Update TCC offset settingSeunghwan Kim
This change sets TCC offset to 10 for kohaku. BUG=b:144532818 BRANCH=firmware-hatch-12672.B TEST=Checked thermal and performance efficiency internally (b:144532818) Change-Id: Ia4b53de3a53bc39c1cd0f7626ae23d4c11a7a3db Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37587 Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Grace Kao <grace.kao@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-05hatch: Fix FPMCU pwr/rst gpio handlingCraig Hesling
1. No gpio control in bootblock 2. Disable power and assert reset in ramstage gpio 3. Power on and then deassert reset at the end of ramstage gpio 4. Disable power and assert reset when entering S5 On "reboot", the amount of time the power is disabled for is equivalent to the amount of time between triggering #4 and wrapping around to #3, which is about 400ms on Kohaku. Since #2 forces power off for FPMCU, S3 resume will still not work properly. Additionally, we must ensure that GPP_A12 is reconfigured as an output before going to any sleep state, since user space could have configured it to use its native3 function. See https://review.coreboot.org/c/coreboot/+/32111 for more detail. The control signals have been validated on a Kohaku in the following scenarios: 1. Cold startup 2. Issuing a "reboot" command 3. Issuing a "halt -p" and powering back on within 10 seconds 4. Issuing a "halt -p" and powering back on after 10 seconds 5. Entering and leaving S3 (does not work properly) 6. Entering and leaving S0iX BRANCH=hatch BUG=b/142751685 TEST=Verify all signals as mentioned above TEST=reboot flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin TEST=halt -p # power back on within 10 seconds flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin TEST=halt -p # power back on after 10 seconds flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin Change-Id: I2e3ff42715611d519677a4256bdd172ec98687f9 Signed-off-by: Craig Hesling <hesling@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-05Revert "mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatch"Kane Chen
This reverts commit 0bc35af93326ec3232ec73c9b1334241b85f0252. Reason for revert: This change breaks runtime s0ix. BRANCH=hatch BUG=b:141831197 TEST=Check slp_s0 residency increased when system is idle. Change-Id: Ida80f55b56de7129ed629eb29bd14f2ef300126f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-04mb/google/kohaku: Adjust I2C clock frequencySeunghwan Kim
All serial I2C bus frequencies should not be over 400KHz in kohaku, but the measurement showed frequencies of I2C1 and I2C4 were over 400KHz. (b:144885961) This change adjusts I2C speed settings to limit that frequencies to 400KHz. The new setting values have been from other projects using same I2C components, and verified I2C1 and I2C4 frequencies < 400MHz internally. BUG=b:144885961 BRANCH=firmware-hatch-12672.B TEST=Verified I2C1 and I2C4 frequency not over 400KHz Change-Id: I9614fb39b6e55cb2ce1b0879a9f5204e55002f8d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-04mb/google/hatch/var/akemi: tune DPTF for AkemiPeichao Wang
Tune DPTF to ensure compliance with Akemi thermal design requirements BUG=b:144195069 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ie0e6d93e1fc0c684e067d1450eb119a53cfefaed Reviewed-on: https://review.coreboot.org/c/coreboot/+/36716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-03hatch: Create stryke variantDtrain Hsu
(Auto-Generated by create_coreboot_variant.sh version 1.0.0). BUG=b:145101696 TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_STRYKE Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iea6f8a1c6c24a1e3545c364551cb623debdc4a1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-02mb/google/hatch/variants/helios: DPTF solution updateKane Chen
Modify DPTF parameters. BUG=b:131272830 BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I93930525edf4c5efb6b73bdfc8f16950754f7c9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37272 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-27mb/google/hatch/var/kindred: Add ELAN touchscreen supportDavid Wu
Add ELAN EKTH6918 USI touchsreen support. BUG=b:131205495 b:127996093 TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-bootimage and check touchscreen work. Change-Id: I8b003685cd7ee68738bcd4298b63a44d6e6118e4 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37236 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-22mb/google/hatch/variant/kohaku: Config MEM_STRAP GPIOsShelley Chen
Kohaku always used the default MEM_STRAPs in hatch baseboard. Adding explicit configuration for Kohaku in the event that MEM_STRAP is set differently in the baseboard gpio file. BUG=b:144895517 BRANCH=hatch TEST=None ./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I8f7105b3925f17c1741660d84c83c5d15f398a8d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37106 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20/mb/google/hatch: Create jinlon variantWisley Chen
Create new variant for jinlon BUG=b:144150654 TEST=emerge-hatch coreboot chromeos-bootimage and boot on jinlon proto board Change-Id: I8deb29041475e38cbbf2f54519940f62b9f21822 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36681 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-16kohaku: Set GPP_A10 to NCShelley Chen
Setting GPP_A10 to NC now that older boards are deprecated and this GPIO is not in use anymore. BUG=b:142056166 BRANCH=hatch TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: If8a249a3dcba90bb4ccb5e3f02595e680f789f93 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36869 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-08 02:59:13 +0000