aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants
AgeCommit message (Collapse)Author
2020-02-17Revert "mb/google/hatch: Override CPU flex ratio"Tim Wawrzynczak
This reverts commit a017e5fb3dda5ea6bbc94ee15b2e981eeaa2d918. Reason for revert: The extra reset in the FSP after the flex ratio is changed causes recovery reasons to be lost. There are some vboot changes that recently landed that could help with this issue, but for now, we are working on a new AU image for Kohaku and this is causing our automated testing to fail. Change-Id: Ic38b390842e2a533033587b3247b7c8d982b1dff Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-07mainboard/hatch: Fix puff DP output on cold bootsEdward O'Callaghan
Wait for HPD DP unless HDMI is plugged. Some Type-C monitors do not immediately assert HPD. If we continue to boot without HPD asserted, Depthcharge fails to show pictures on a monitor even if HPD is asserted later. Similar to that of b:72387533 however our DP&HDMI are beind a MST. See commit d182b63347c744c on how this was done for mainboard/fizz. BUG=b:147992492 BRANCH=none TEST=Verify firmware screen is displayed even when a type-c monitor does not immediately assert HPD. Verify if HDMI monitor is connected, AP does not wait (and firmware screen is displayed on HDMI monitor). Change-Id: I19d40056e58f1737f87fd07d62b07a723a63d610 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2020-02-06mb/google/hatch: Add noise mitigation setting for dratini/jinlonWisley Chen
Enable acoustic noise mitigation, the slow slew rates are fast time divided by 8 and disable Fast PKG C State Ramp (IA, GT, SA). BRANCH=hatch BUG=b:143501884 TEST=build and verify that noise reduce. Change-Id: I65f47288a7b1da98296fdba87ab5ca0c3a567aaf Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38212 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-05mb/google/hatch: Correct PCIe ports setting for mushuAmanda Huang
1. Enable PCIe port for dGPU 2. Change WLAN PCIe port from port 14 to port 7 BUG=b:147249494 TEST=Ensure dGPU and WLAN shows up with lspci. Change-Id: Iea3292be7d8029c35847118228bbb773418632a1 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38399 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-04mb/google/hatch: Enable Audio DSP oscillator qualification for S0ixAamir Bohra
BUG=b:139481313 Change-Id: I1a0911b7967e5823fdce98195420728bd38c80f6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-02-04mb/google/puff: Enable HECI communicationJamie Chen
Set HeciEnabled = 1 on puff device tree to turn on Intel ME communication interface. BUG=b:143232330 BRANCH=None TEST=Build puff and boot up OS. ran lspci and confirmed there is a HECI device. 00:16.0 Communication controller: Intel Corporation Device 02e0 Change-Id: I2debb885022ae31e395869d014a91824b5dd980c Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-02-01hatch/mushu: Fix FPMCU pwr/rst gpio handlingCraig Hesling
Asserting reset in RO instead of in RW has no impact on security or performance, but it does limit improvements to this process later. This fix removes reset line control from RO and makes these variants consistent with other hatch variants. This fix reinforces the concept from commit fcd8c9e99e (hatch: Fix FPMCU pwr/rst gpio handling). BUG=b:148457345 TEST=None Change-Id: I12dc0c3bead7672e2d3207771212efb0d246973a Signed-off-by: Craig Hesling <hesling@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-02-01mb/google/hatch/variants/mushu: Enable dGPU BOMACO modeAmanda Huang
Configure GPP_H22 as output pin for BOMACO mode enabled. BOMACO stands for "Bus Off Memory Alive Core Off". BUG=b:146081272 TEST=emerge-mushu coreboot Change-Id: Ic35e55771d76b7254bcb457fcb38f37433b9ad67 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38210 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/google/hatch: Modify kohaku's EC_SCI_EVENTS maskTim Wawrzynczak
Remove EC_HOST_EVENT_MKBP from kohaku's EC_SCI_EVENTS mask, so that MKBP events don't generate an SCI. The EC is also being changed to use host events to wake up the system, and use the EC_INT_L line for MKBP IRQ signalling. Otherwise, there would be two IRQs generated for MKBP events. BUG=b:144122000 BRANCH=firmware-hatch-12672.B TEST=System shows ACPI interrupt as the wakeup IRQ, and the MKBP host event is properly processed as well. Change-Id: I9ff964e38e66ccb953a1adad5a936a9da6e4f3a1 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38654 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/google/hatch: Override CPU flex ratioSubrata Banik
This patch overrides CPU flex ratio on hatch in order to get better boot time numbers in vboot_reference. BUG=b:142264107 TEST=Able to save ~100ms of platform boot time while running with lower cpu flex ratio (i.e. freq ~1500MHz) Without this CL 1100:finished vboot kernel verification 802,443 (148,108) With this CL 1100:finished vboot kernel verification 685,382 (46,496) Change-Id: Idd1d1c0c04b1f742f17227a1335f27a956ee940d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36865 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-30mainboard/google/hatch: Fix Puff _PR to toggle NIC ISOLATE# for S0ixEdward O'Callaghan
Turns out when going into S0ix we want the kernel to toggle de-assert to 0 for the ISOLATE# pin on the NIC for S0ix not to be woken by PCIe traffic on PCH. Upon resume the ISOLATE# pin on the NIC is then re-asserted for it to become lively again. BUG=b:147026979 BRANCH=none TEST=Boot puff and do 1500 cycles of S0ix. Change-Id: I3470e1edd93b461b66fc6444541a64339bcdcce3 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38523 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-27mainboard/google/hatch: Set GPP_C7 as the wake pin for the NIC on PuffSam McNally
BUG=b:148252157 BRANCH=none TEST=Put a puff in s0ix, send a WoL magic packet. Change-Id: I4a08a2f5505d00909c9301315fcf72f687141f91 Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-22mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
1. Add a TEMP_SENSOR3 2. Update DFPS (fan performance state) table with values received from thermal team 3. Update PL1 override to 15W 4. Update PL2 override to 51W BRANCH=hatch BUG=b:147792204 TEST=build and verify by thermal team Change-Id: I21c17c09a097c963f4dd1b7d5f8212c83a639dc3 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38025 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22mb/google/hatch: Kohaku: Add MKBP to suspend wake eventsTim Wawrzynczak
This CL allows MKBP events from the EC to wake the system from suspend states. BUG=b:144122000 BRANCH=firmware-hatch-12672.B TEST=Verify that MKBP events generated from EC will wake the system from S0ix. Change-Id: I8a0d2c7ed89fa1ea937a08c3082cc5d3e782efff Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-21mb/google/puff: Add ac/dc loadline configuationsJamie Chen
According to VRTT report, add ac/dc loadline configuations in puff device tree. BUG=b:147206535 BRANCH=None TEST=build coreboot and fsp with enabled fw_debug. Flashed to puff and checked the log. All ac/dc loadline configs were set correctly. Change-Id: Ia806de23a1fefcaac3ce9a462a8a04eee5eabcae Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-21mb/google/hatch/var/jinlon: Remove DPTF fan controlWisley Chen
Jinlon will use EC to control fan, so remove DPTF fan control. BUG=b:141259174 TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I8ada4fe72eee260fecf45d00510da8b91e3f10a4 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-21mainboard/hatch: Fix puff USB ACPI names and typesEdward O'Callaghan
Fix devicetree to advertise the correct USB names and types in the generated ASL. BUG=b:146437991 BRANCH=none TEST=booted and inspected the reported generated ASL. Change-Id: I133b4db444f9a5f0a36d8e976ae490f24cf307d8 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-01-18mainboard/google/puff: update SATA strengthTim Chen
Base on SATA SI report to fine tune the strength for port 1. BRANCH=none BUG=b:147351936 TEST=build and test SATA port works fine. Change-Id: Ib82b7e5df32b4ce794682781f33c44dfeb6e68bf Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-18mainboard/google/puff: update USB configurationJamie Chen
Base on USB SI report to fine tune the strength and correct some OC pin settings. BRANCH=none BUG=b:147206010 TEST=build and test all usb ports function work fine. Change-Id: Idbee5cdddf3a83f97109214a95e0f9875b3b3f8f Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-18mainboard/puff: Fix ACPI tables to advertise correct featuresEdward O'Callaghan
Provide Puff with it's own copy of ec.h copied from the baseboard/includes however with the battery, lid and ps2 defines stripped. This is to ensure the correct ASL is generated so that we don't advertise PS2 keyboard support and battery/lid interrupts which don't exist. V.2: drop EC_ENABLE_ALS_DEVICE as well. V.3: set MAINBOARD_EC_SMI_EVENTS to 0 and drop EC_HOST_EVENT_LID_CLOSED smi event. V.4: drop EC_HOST_EVENT_MODE_CHANGE && provide wake pin for EC for _PRW WoL method V.5: drop EC_HOST_EVENT_KEY_PRESSED BUG=b:147850335 BRANCH=none TEST=builds Change-Id: If13bd124c7229ced996efb841980604d13be09af Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-16/mb/google/hatch/variants/helios: Remove MAX98357A devicetree entryKrishna Prasad Bhat
Helios does not have MAX98357A speaker amplifier, so remove the devicetree entry. BRANCH=firmware-hatch-12672.B Change-Id: Id02410553f018385d407086b2f9bc3ee1e7a5f40 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@google.com>
2020-01-10mb/google/hatch/variants/helios: Modify DPTF parametersKane Chen
Modify DTRT CPU Throttle Effect on TSR0 change to TSR3. BUG=b:131272830 BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I5b4645d7552e795a33c1b86d95c4061da71c65bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/38299 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-08mb/google/hatch: Remove fixed IccMax valuesJamie Chen
Remove fixed IccMax values for all domains. IccMax will be selected by CPU SKU in fill_vr_domain_config function. BUG=b:145094963 BRANCH=None TEST=build coreboot and fsp with enabled fw_debug. Flashed to device and checked the log. Signed-off-by: Jamie Chen <jamie.chen@intel.com> Change-Id: I3f623d143f66c4f6ec63705844c9be7173feeb52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-03mainboard/google/puff: Clean up pcie 15.3 ep in dtEdward O'Callaghan
Clean up devicetree as nothing special is needed here. BUG=b:142769041 BRANCH=none TEST=builds Change-Id: I0790631233fdcaa6a785d2cb41e79b8f2f469d44 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-01-02mainboard/google/puff: Enable net driver on pcie epEdward O'Callaghan
Let coreboot know there is a NIC device on the end so that the mac from vpd is set at early boot. Properly configure the link-leds in devicetree s.t. valid values are written out to the register at initialization. BUG=b:146592075,146999042,146999043 BRANCH=none TEST=Boot to kernel. Insert mac address into VPD vpd -s ethernet_mac=<address> reboot the system. Ensure we have ip address and corresponding mac address with ifconfig. Ensure ethernet controller shows up with lspci. Change-Id: I76ce6d8a5a26842fcb2544ee96567fe0da8603b1 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-12-31mb/google/hatch/akemi: modify DPTF parameters for new FANPeichao Wang
New FAN use NTN bearing, so tune DPTF parameters to satisfy requirement BUG=b:144370669 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6fbf0c80cd2421ce9a489c8923a97d860a11b545 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-27mb/google/kohaku: Update reset_delay_ms for digitizer deviceSeunghwan Kim
We found the driver binding failure issue could be cleared with 100ms of "reset_delay_ms". Needs further check with device vendor, anyway it seems the IC need some time before communication after de-assertion of reset. BUG=b:129159369 BRANCH=firmware-hatch-12672.B TEST=Verified driver bound successfully. Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Iccb33c13c9a390a2c971325c74c0c4ad4b08618e Reviewed-on: https://review.coreboot.org/c/coreboot/+/37911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-27mb/google/hatch/var/dratini: Add a new sku for dragonairWisley Chen
Add a new sku for dragonair BUG=b:146504217 TEST=emerge-hatch coreboot Change-Id: I4492d65f35d3583df1606c5f2901228b3ae14e4a Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-26mb/google/hatch/akemi: Set touchpad data hold time more thanPeichao Wang
300ns According to SI team and vendor request, need to tune I2C bus 0 data hold time more than 300ns BUG=b:146163044 TEST=build firmware and measure I2C bus 0 data hold time Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I75e33419cbaef746487de6ee8628d07cf08adaa9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37322 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26hatch: Fix FPMCU pwr/rst gpio handling for dratini/jinlonWisley Chen
In https://review.coreboot.org/c/coreboot/+/37459 (commit fcd8c9e99e7f70e2b9494f2fa28a08ba13126daa) which moves power/reset pin control of FPMCU to var/board/ramstage, but does not implement it for dratini/jinlon. So, add it in dratini/jinlon. BUG=b:146366921 TEST=emerge-hatch coreboot Change-Id: I1b6dbe4ba0a1242aa64346410beed4152b4f457f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37833 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/hatch/var/jinlon: Update DPTF parametersWisley Chen
The change applies the DPTF parameters received from the thermal team. BUG=b:146540028 TEST=build and verified by thermal team. Change-Id: I222bac5f04ba5cdde1788c6d4ca8af80d323ca98 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-25mainboard/google/puff: Add GPIO configurationEdward O'Callaghan
BUG=b:144809606,142094759 BRANCH=none TEST=none Change-Id: Iae20d2262c910044dde84f10d795f4aee3318532 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Kangheui Won <khwon@chromium.org> Co-Author: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37925 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25mb/google/hatch/variant/kohaku: Fix Kohaku baseboard/gpio.c mux commentsEdward O'Callaghan
Follow MEM_STRAP_* comment style to be consistent with other boards. BUG=b:144809606 BRANCH=hatch TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I4945f676f307af9b8c0baa1fbcaf33113de647c3 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37592 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25mainboard/google/hatch: Move gpio GPP_H3 config up from baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_H3 gpio config for easier review. This toggles the MAX amp which not all boards have. Move the pin configuration to boards with the respective devicetree configuration following on from the theme of commit b417786525. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: Iefd2223af79a13c8a42d07bc10b2772dbff6d3e5 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25mainboard/google/hatch: Move gpio GPP_C* NC down into baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_C15 group for easier review. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: I578245e24895d361d80ad016a4f18204e2b6e1ca Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25mainboard/google/hatch: Move gpio GPP_A* NC down into baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_A* group for easier review. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: I29b4323ac80b1288b2562846217c4f377714fc2c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-24mainboard/variant/puff: set PL values for puffKangheui Won
To be safe for now, don't differentiate between SKUs and use lower values to ensure board won't be browned out. BUG=b:143246320 TEST=none BRANCH=none Change-Id: I041ebaa33bf2582386198290e625099ba8e2f3c9 Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37651 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-24mainboard/google/hatch: Remove MAX98357A assumption from baseboardEdward O'Callaghan
Generally work towards a more loose baseboard definition by moving out some original assumptions to be board specifics. Specifically Puff does not have the MAX98357A speaker amp and enabling the driver winds up generating incorrect SSDT tables that confuse the kernel. Since devicetree inherits the chip from device node in base and an override will also inherit the chip and thus dispatch the unwanted fill_ssdt fn call. V.2: lean on linker to drop max98357a driver when not in dt. BRANCH=none BUG=b:146519004 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I8e7fed69a4c6d9610ac100da6bae147828ebfa81 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37909 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-23mainboard/google/puff: Configure HDA registersEdward O'Callaghan
Enable PCH HDA and configure dmic+ssp registers. BRANCH=none BUG=b:146519004 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: If9495261201ca256cdb35352338c0b3a82a50196 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-12-23mainboard/google/puff: Enable func0 of 1c for nicEdward O'Callaghan
Two things here: i. ) FSP requires that function 0 be enabled whenever any non-zero functions hang under the same bus:device. ii.) FSP reorders function 6 RP to be function 0 if function 0 is indeed unused. BUG=b:146437819 BRANCH=none TEST=none Change-Id: I0f499a23495e18cfcc712c7c96024433a6181a4c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-20mb/google/hatch/var/kindred: Decrease i2c frequency below 400 KHzDavid Wu
Before tuning i2c frequency, I2C0: 479.4 KHz I2C1: 491.4 KHz I2C4: 476.4 KHz After tuning i2c frequency, I2C0: 391.8 KHz I2C1: 396.4 KHz I2C4: 388.8 KHz BUG=b:146535585 BRANCH=hatch TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I55d095efb60eba4e860b54bb90e8e0df62d88419 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37831 Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20mb/google/hatch/var/jinlon: Config WWAN_RESETWisley Chen
jinlon supports LTE, so remove WWAN_RESET NC configuration BUG=none TEST=emerge-hatch coreboot Change-Id: Ibc5d21f0a33952f519265a5ce2df559a79346d9e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37837 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20mainboard/google/puff: Add extra USB configurationKangheui Won
Adding extra USB configuration since Puff has different USB ports compared to hatch BRANCH=none BUG=b:146437609 TEST=none Change-Id: I42ef6b6b718274953711c84ebe90971f108501fa Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-12-20mainboard/google/puff: Enable pcie7 ep in dtEdward O'Callaghan
Missing bus init for RTL8111H ethernet chip hanging on bus. V.2: Include admendments from Kangheui. BRANCH=none BUG=b:146437819 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I22aba312f183ea05eeb81d326ca0c05ce340a2e8 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-20mainboard/google/puff: Clean up dt for pci 15.2Edward O'Callaghan
Seems nothing special is needed here from coreboot. V.2: Fix typo as well in speed map. BRANCH=none BUG=b:143047058 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: Ief750f98677b2017af78fb0b5bc98e1492dedbe4 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-19mb/google/hatch: Add mushu variantBob Moragues
Create initial overlays and build for mushu Signed-off-by: Bob Moragues <moragues@chromium.org> Change-Id: I81b5bf960ead0463159ac35f4f96e3ccc8c0364e Reviewed-on: https://review.coreboot.org/c/coreboot/+/37645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-19mainboard/google/puff: enable emmcKangheui Won
enable eMMC in puff/overridetree.cb BRANCH=none BUG=b:146455177 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I432f437e0c9a618bbbf76d22976ea757c8fbdb83 Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-12-12mb/google/hatch/variant/akemi: Increase Goodix touch screen reset delay timePeichao Wang
Confirmed with Goodix team, so increase reset delay time from 120ms to 150ms. BUG=b:144267684 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I4ff95ac89314fc031620ca28e4f6e6e26cdef3f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37544 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12mb/google/hatch: Add new SKU ID 3 and 4Peichao Wang
1. SKU ID 1 and 3 for eMMC 2. SKU ID 2 and 4 for SSD BUG=b:144815890 BRANCH=firmware-hatch-12672.B TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-bootimage Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I25f0c4142be024ba55f671491601d1f6ec26d68a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37498 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11mb/goog/hatch/var/dratini: Tune i2c frequency to 400 KHzWisley Chen
Tuning i2c frequency for dratini: I2C0: 396 KHz I2C1: 398 KHz I2C3: unused I2C4: 394 KHz BUG=b:145891557 BRANCH=hatch TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I1431554fbce5f3ce113ef1a934e39448e7ba321c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37605 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-10mb/google/kohaku: Update TCC offset settingSeunghwan Kim
This change sets TCC offset to 10 for kohaku. BUG=b:144532818 BRANCH=firmware-hatch-12672.B TEST=Checked thermal and performance efficiency internally (b:144532818) Change-Id: Ia4b53de3a53bc39c1cd0f7626ae23d4c11a7a3db Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37587 Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Grace Kao <grace.kao@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-05hatch: Fix FPMCU pwr/rst gpio handlingCraig Hesling
1. No gpio control in bootblock 2. Disable power and assert reset in ramstage gpio 3. Power on and then deassert reset at the end of ramstage gpio 4. Disable power and assert reset when entering S5 On "reboot", the amount of time the power is disabled for is equivalent to the amount of time between triggering #4 and wrapping around to #3, which is about 400ms on Kohaku. Since #2 forces power off for FPMCU, S3 resume will still not work properly. Additionally, we must ensure that GPP_A12 is reconfigured as an output before going to any sleep state, since user space could have configured it to use its native3 function. See https://review.coreboot.org/c/coreboot/+/32111 for more detail. The control signals have been validated on a Kohaku in the following scenarios: 1. Cold startup 2. Issuing a "reboot" command 3. Issuing a "halt -p" and powering back on within 10 seconds 4. Issuing a "halt -p" and powering back on after 10 seconds 5. Entering and leaving S3 (does not work properly) 6. Entering and leaving S0iX BRANCH=hatch BUG=b/142751685 TEST=Verify all signals as mentioned above TEST=reboot flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin TEST=halt -p # power back on within 10 seconds flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin TEST=halt -p # power back on after 10 seconds flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin Change-Id: I2e3ff42715611d519677a4256bdd172ec98687f9 Signed-off-by: Craig Hesling <hesling@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-05Revert "mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatch"Kane Chen
This reverts commit 0bc35af93326ec3232ec73c9b1334241b85f0252. Reason for revert: This change breaks runtime s0ix. BRANCH=hatch BUG=b:141831197 TEST=Check slp_s0 residency increased when system is idle. Change-Id: Ida80f55b56de7129ed629eb29bd14f2ef300126f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-04mb/google/kohaku: Adjust I2C clock frequencySeunghwan Kim
All serial I2C bus frequencies should not be over 400KHz in kohaku, but the measurement showed frequencies of I2C1 and I2C4 were over 400KHz. (b:144885961) This change adjusts I2C speed settings to limit that frequencies to 400KHz. The new setting values have been from other projects using same I2C components, and verified I2C1 and I2C4 frequencies < 400MHz internally. BUG=b:144885961 BRANCH=firmware-hatch-12672.B TEST=Verified I2C1 and I2C4 frequency not over 400KHz Change-Id: I9614fb39b6e55cb2ce1b0879a9f5204e55002f8d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-04mb/google/hatch/var/akemi: tune DPTF for AkemiPeichao Wang
Tune DPTF to ensure compliance with Akemi thermal design requirements BUG=b:144195069 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ie0e6d93e1fc0c684e067d1450eb119a53cfefaed Reviewed-on: https://review.coreboot.org/c/coreboot/+/36716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-03hatch: Create stryke variantDtrain Hsu
(Auto-Generated by create_coreboot_variant.sh version 1.0.0). BUG=b:145101696 TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_STRYKE Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iea6f8a1c6c24a1e3545c364551cb623debdc4a1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-02mb/google/hatch/variants/helios: DPTF solution updateKane Chen
Modify DPTF parameters. BUG=b:131272830 BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I93930525edf4c5efb6b73bdfc8f16950754f7c9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37272 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-27mb/google/hatch/var/kindred: Add ELAN touchscreen supportDavid Wu
Add ELAN EKTH6918 USI touchsreen support. BUG=b:131205495 b:127996093 TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-bootimage and check touchscreen work. Change-Id: I8b003685cd7ee68738bcd4298b63a44d6e6118e4 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37236 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-22mb/google/hatch/variant/kohaku: Config MEM_STRAP GPIOsShelley Chen
Kohaku always used the default MEM_STRAPs in hatch baseboard. Adding explicit configuration for Kohaku in the event that MEM_STRAP is set differently in the baseboard gpio file. BUG=b:144895517 BRANCH=hatch TEST=None ./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I8f7105b3925f17c1741660d84c83c5d15f398a8d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37106 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20/mb/google/hatch: Create jinlon variantWisley Chen
Create new variant for jinlon BUG=b:144150654 TEST=emerge-hatch coreboot chromeos-bootimage and boot on jinlon proto board Change-Id: I8deb29041475e38cbbf2f54519940f62b9f21822 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36681 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-16kohaku: Set GPP_A10 to NCShelley Chen
Setting GPP_A10 to NC now that older boards are deprecated and this GPIO is not in use anymore. BUG=b:142056166 BRANCH=hatch TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: If8a249a3dcba90bb4ccb5e3f02595e680f789f93 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36869 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14/mb/google/hatch/var/dratini: Add new memory supportWisley Chen
1. ram id 8: 16G 2666 2 bank groups memory 2. ram id 9: 16G 3200 4 bank groups memory BUG=b:142762387 TEST=boot with memory (KAAG165WA-BCT/H5ANAG6NCMR-XNC) Change-Id: Ic63d911458b59de11c12ce776f6f7d04b1eb3b6c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36667 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-13mb/google/hatch/variants/helios: Fix leakage voltage problem on touchscreenKane Chen
Set GPP_C4 default to low to fix leakage voltage problem on touchscreen during power on. BUG=b:142368161 BRANCH=Master TEST=emerge-hatch coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure touchscreen works. Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ie9197192c9d6dfb30c10559990c6010b1b2d3a45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36670 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-12mainboard/google/hatch: Create helios_diskswap variantAlexis Savery
Created helios_diskswap as a variant of helios (hatch variant). BUG=b:143378037 BRANCH=None TEST=none Change-Id: I6536b3908ec569e1ac42ea7c5be85701012ab177 Signed-off-by: Alexis Savery <asavery@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-11-11Helios: Set the reset delay for Goodix touchscreen to 120msShelley Chen
With the 0.71586+ Goodix FW, we can reduce the reset delay from 500ms to 120ms. We should do the change in coreboot device tree after we ensure Helios DVT build is flashed with 0.71586+ Goodix FW. BUG=b:142316026 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I000ee4ea84c598b437992f1000f6e5b561cae605 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2019-11-08mb/google/hatch/var/akemi: disable unused USB port for Akemi platformPeichao Wang
Akemi platform dosen't support WWAN device and unused USB2 port 3, 4, 5, 7, 8 and USB3 port 3, 4, 5 so close them. BUG=None TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I7eff4da77caea7d4fe46597320be134d34d78a22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-11-07hatch: Create puff variantEdward O'Callaghan
Includes: - gpio mappings, - overridetree.cb, - kconfig adjustments for reading spd over smbus. V.2: Rework devicetree with comments and drop some useless gpio maps. BUG=b:141658115 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I6449c4fcc1df702ed4f0d35afd7b0981e4c72323 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-11-07mb/google/hatch/variants/helios: Modify touchscreen power on sequenceKane Chen
The previous values do not affect the touchscreen function. But, the previous values cause the power leakage in S0ix. from b/142368161: 1. Modify GPP_D: The specification define T1 >= 10ms. We change it to 12ms for a safety and low impact value in our mind. Enable pin as GPP_D9 is define to be AVDD in specification. Set it to 10ms to make it to be the final one to pull low during power off sequence . 2. Add GPP_C4: If we set stop_off_delay_ms to be 1. The true T4 we got will be 300us . Set stop_off_delay_ms to be 2 . True T4 will be 500us . So we change it to 5 to be a low impact value in our mind according to the true T4 value we got . BUG=b:142368161 BRANCH=Master TEST=emerge-hatch coreboot chromeos-bootimage ./util/abuild/abuild -p none -t google/hatch -x -a Signed-off-by: YenLu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I86c920ff1d5c0b510adde8a37f60003072d5f4e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35907 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-05mb/google/hatch/variants/helios: Update TSR3 sensor thresholdsSumeet Pawnikar
Update thermal threshold settings for TSR3 sensor. There is an issue fan is always running, even during system idle state. This change fixes this issue and fan starts only when it breaches the temperature threshold. BRANCH=None BUG=b:143861559 TEST=Built and tested on Helios system Change-Id: Ia417f8c51442005cc8c2251c188cebc197e0a773 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36609 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04mb/google/hatch: update DLL values for KindredJamie Chen
Update emmc DLL values for Kindred BUG=b:131401116 BRANCH=none TEST=Boot to OS 100 times on Kindred EVT Change-Id: Ibd840b31bb0e5a742495758de55b532e6c3946aa Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-30mb/google/hatch/variants/helios: Modify DPTF parametersKane Chen
Modify DPTF parameters. Modify TDP PL1 values to 15. Remove TCHG Level 3 - 0.5A. BUG=b:131272830 BRANCH=none TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: YenLu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I0e5c079856a167b1c2ef52e446d055404e565858 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35794 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-30hatch: refactor gpio table into baseboard, allow empty SPDsPaul Fagerburg
Each variant needed to define variant_early_gpio_table(), even if it didn't need to make any changes. Added a __weak version of the function into baseboard/gpio.c. Certain upcoming Hatch variants will not use SPD files. Allow SPD_SOURCES in spd/Makefile.inc to be empty. BUG=None BRANCH=None TEST=Build coreboot and see that it builds without error Change-Id: Ie946cfd7c071824168faa38fd53bd338a5a451e1 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36068 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-27Dragonair: Add sku23Wisley Chen
BUG=b:142987639 TEST=emerge-hatch coreboot Change-Id: I0ff1a81d0579d0b328a48bc7d4f867592ec63e8b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-25mb/google/hatch: Set DSM parameters for HeliosCheng-Yi Chiang
Set VPD keys for DSM parameters in overridetree.cb for Helios. RT1011 driver will load values from VPD and set them to device property. BUG=b:140397934 BRANCH=none TEST=On Helios, with patch series, check realtek,r0_calib and realtek,temperature_calib are available to rt1011 codec driver. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Change-Id: Ic72fd57becf93e70a1a716dbb76633509f2fd5c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-25mb/google/hatch: Fix speaker mapping for HeliosCheng-Yi Chiang
The correct mapping for speakers to their names should be: uid 0: Woofer Left uid 1: Woofer Right uid 2: Tweeter Left uid 3: Tweeter Right Also, fix the name to be 4-character. BUG=b:140397934, b:143192767 BRANCH=none TEST=On Helios, with patch series, check realtek,r0_calib and realtek,temperature_calib are available to rt1011 codec driver. And the speaker mapping is correct. Change-Id: I353fb9ad0ca8ec85431eb2b59be748b4887278cf Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36256 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24mb/google/hatch/var/akemi: Update DPTF thermal sensor for AkemiPeichao Wang
Add thermal sensor: TSR2 to ACPI table, monitor CPU temperature BUG=b:143046086 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Id150c5c3cb6d07407fd20417237457b5722e6f2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/36052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Philip Chen <philipchen@google.com>
2019-10-22mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatchKane Chen
On hatch and variant HW designs supports VCCPRIM_CORE Low Voltage Mode. VCCPRIM_CORE can be down to 0.75v when slp_s0 is asserted. This commit enables PchPmSlpS0Vm075VSupport UPD so that FSP can program related setttings to save power. BUG=b:134092071 TEST=Run suspend_stress_test on kohaku and pass 100 cycles Change-Id: Ia02ff8823883489b36349457213409496f082f36 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-22mb/mainboard/hatch: support Goodix touch panel for AkemiPeichao Wang
Configure enable pin GPP_D9 pull high when active BUG=b:143046441 TEST=build bios and verify touch screen works fine Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I83060f31d4d22c9be05bba119816c6aa66e4126c Reviewed-on: https://review.coreboot.org/c/coreboot/+/36186 Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-21src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>'Elyes HAOUAS
Change-Id: I0c965e598e260ff8129aa07fb9fc5bf6e784e1d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-21mb/google/hatch/var/dratini: Add ELAN touchscreen supportWisley Chen
Add ELAN EKTH6915 USI touchsreen support. BUG=b:139392144 TEST=check touchscreen work, and confirmed power sequence with vendor. Change-Id: I8ebc067bbb407498de00ea0b6c23b0848023cffe Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36125 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-21mb/google/hatch/akemi: disable unused devices for AkemiPeichao Wang
Akemi unused devices declare: - I2C #1 gpio_keys - close I2C #3 - close GSPO #1 BUG=b:142800988 TEST=Reboot stress test and suspend stress test, the DUT will be able to working properly Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ibff1446ccb213abce1a2ae19718774d9d6737cc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36086 Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
The change applies the DPTF parameters. BUG=b:142849037 TEST=build and verified by thermal team Change-Id: I5da8d373f38d23929ffec95bc1c9e942f131297f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-16mb/google/hatch/akemi: Tune I2C bus 1 clockPeichao Wang
Tune I2C bus 1 clock and insure it meets I2C spec. BUG=b:142683257 TEST==flash coreboot to the DUT and measure I2C bus 1 clock frequency less than 400KHz Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Id4cdbad4dd9d451763fb536988402d6e6fe3a378 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-16mb/google/hatch/var/dratini: Add enable pin for elan touchscreenWisley Chen
Add enable pin for elan touchscreen BUG=b:142710871 TEST=touchscreen work Change-Id: I09b6ffb962272bfe46e63b057be885b1bdf13554 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-16mb/google/hatch/var/dratini: update goodix power sequenceWisley Chen
Update power sequence to meet spec. BUG=b:142710867 TEST=touchscreen work, and make sure power sequence to meet spec with vendor. Change-Id: I98f8b095374caa8c3540307a51f9d3b69baec905 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36060 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-15helios: Add TEMP_SENSOR4 to DPTFPaul Fagerburg
Helios adds TEMP_SENSOR4 to the EC ADC2 pin. Add this to the DPTF. BRANCH=None BUG=b:142266102 TEST=`emerge-hatch coreboot` Verify that Helios builds correctly. Change-Id: I3bc19f9b9bd644e134987749ad9a4d875ad8b40a Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-15mb/google/hatch: set wifi sar for dragonairWisley Chen
Enable wifi sar feature and set wifi sar name for dragonair sku. BUG=b:142109545 TEST=emerge-hatch coreboot chromeos-bootimage 1. Check wifi_sar-dragonair.hex in /cbfs-rw-raw/dratini 2. Add iwlwifi.debug into kernel params. 3. check SAR value from dmesg only when sku id is 21/22 Change-Id: I0e08610b7c7d2d8da5a749d278bcde26af590e31 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-10-15mb/google/hatch: Initialize FPMCU_PCH_BOOT1Wisley Chen
FPMCU_PCH_BOOT1 pin is connected to GPP_C12. So, config GPP_C12. BUG=b:142188003 TEST=emerge-hatch coreboot Change-Id: I73a5c3529330ef3e72f4c7d5fcbbd2f6693494d8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35845 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-11mb/google/hatch: Add new touchscreen option for KohakuTim Wawrzynczak
The next board rev will have a new option for an Elan touchscreen. Add support for this in the devicetree, as well as use the 'probed' property on both touchscreen options. BUG=b:141957731 BRANCH=none TEST=compiles (next board rev not available yet) Change-Id: I135e693304cbb8dffc0caf4c07846033d6802208 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-09mb/google/hatch: Remove pen device for dratini/dragonairWisley Chen
Dratini/Dragonair doesn't support pen insertion/ejection feature, so remove it. BUG=b:142159117 TEST=emerge-hatch coreboot Change-Id: I64859a162d8dc75ffe55d98b72a056dd72e8de75 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-09mb/google/hatch: Set FPS as wake sourceShelley Chen
BUG=b:142131099 BRANCH=None TEST=powerd_dbus_suspend, ensure DUT in S0ix touch fp sensor and ensure DUT wakes up in S0 Change-Id: If57094aa1076d79ac0886b71fa5532411bfeb45f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-08mb/google/kohaku: Assign GPP_A19 as reset_gpio of stylusSeunghwan Kim
Applying reset_gpio config of stylus for kohaku. GPP_A19 has been assigned in the latest schematics. We would keep GPP_A10 as output high for old revision devices temporarily. BUG=b:141914474 BRANCH=none TEST=verified stylus works internally Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: I61f0f9a4378f47bf455f0726d44beeaf2f67197b Reviewed-on: https://review.coreboot.org/c/coreboot/+/35748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-10-02soc/intel: Replace config_of_path() with config_of_soc()Kyösti Mälkki
The previously provided device path made no difference, all integrated PCI devices point back to the same chip_info structure. Change reduces the exposure of various SA_DEVFN_xx and PCH_DEVFN_xx from (ugly) soc/pci_devs.h. Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-26mb/mainboard/hatch: support elan touchpad for AkemiPeichao Wang
Modify IRQ pin from D21 to A21 and support wake-up from touchpad BUG=b:141519690 TEST=build bios and verify elan touchpad works fine Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6cc5b780ffcee24f1f2a04e88c30628ceb5904e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35551 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24mb/google/kohaku: Update DPTF parameters and TCC offset settingSeunghwan Kim
This change applies fine-tuned DPTF parameters and TCC offset setting for kohaku. Also enables EC_ENABLE_MULTIPLE_DPTF_PROFILES for tablet mode. BUG=b:137688474 BRANCH=none TEST=built and verified the setting values Change-Id: I92e268b2e07ca5a04e29bda84ddb8fc21eb23251 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-09-22mb/mainboard/hatch: add spd: 8G_3200 for AkemiPeichao Wang
BUG=b:140545732 TEST=build bios and spd index set to 6, verify DUT bring up normally Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I337b0bdcd37a9c4baacccbc6786968031a41b31e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35511 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/google/hatch: Add G2Touch Touchscreen supportWisley Chen
Add G2Touch Touchscreen support for dratini BUG=b:141281841 TEST=emerge-hatch coreboot chromeos-bootimage, and check touchscreen work. Change-Id: I0dbde7f8396da6335b22aeb4a9703336e2b862b8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-20mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configurationTim Wawrzynczak
A closer read of the EDS indicates that when GPIO Driver mode is selected, GPIO input event updates are limited to GPI_STS only. GPI_GPE_STS updates are therefore masked, and we don't want to enable this behavior. It masks the GPE and does not allow us to see this GPE as a wake source, obscuring the reason that the system woke up. Also switch the IRQ from level-triggered to edge-triggered, otherwise the system will auto-wake from any sleep state when the pen is ejected from the garage. BUG=b:132981083 BRANCH=none TEST=Wake up system from S0ix using pen eject, verify that mosys eventlog shows GPE#8 as the S0ix wakeup source. Wake up system from S3 via pen eject, and verify that the wakeup source shows as GPE#8. Change-Id: If017e12e23134f5cfed7cbb6047cc9badd9bf7e8 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35459 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/hatch/variants/helios: Add DPTF control for ambient sensorSumeet Pawnikar
Add DPTF based thermal control for ambient sensor for CML based Helios system. Also, update other sensor names information. BUG=b:139335207 BRANCH=None TEST=Build and Boot on Helios board and check all sensor details. Change-Id: I322d53536fbdf6db70f5a24afb322d9f206eaeac Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-18mb/google/hatch/variants/helios: Update DPTF parametersSumeet Pawnikar
Update DPTF thermal temperature threshold values for CML based Helios system. This updates CPU active cooling temperature threshold to appropriate values which addresses the issue of running the Fan at lower CPU temperature as per bug. Also, added active cooling temperature thresholds for other TSR sensors. BUG=b:141087272 BRANCH=None TEST=Build and boot on Helios board to check the fan functionality. Change-Id: I5c8502f8c9e6121c18024d2a8d5a4f7680797b8d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35446 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 10:11:16 +0000