aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants/baseboard
AgeCommit message (Collapse)Author
2019-03-27mb/mainboard/google/hatch/variants: Set tcc_offset valueSumeet Pawnikar
Set tcc_offset value to 10C. It configures the Thermal Control Circuit (TCC) activation value to 90C. This prevents any abrupt thermal shutdown by taking early thermal throttling action when CPU temperature goes above 90C. Change-Id: Ifee0fcc326530622b04e60af0f3b9cb9e3aea7ea Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31984 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27mb/google/hatch: Add GPIO_A8 for Pen detect functionDtrain Hsu
Add GPIO_A8 for pen detect function. BUG=b:122765828 TEST=flash BIOS and using switch to verify GPIO_A8 value change. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ie7c888ea61dd61e60c1d184565bd95e6b03777be Reviewed-on: https://review.coreboot.org/c/coreboot/+/31815 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22mb/google/hatch: Enable FP MCUShelley Chen
AP communicates with FP MCU through gspi1. BUG=b:126455006 BRANCH=None TEST=ensure during bootup we see spi id spi-PRP0001:01 in dmesg FP MCU fw is not ready yet, so not much testing to be done yet. Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I2eba205d5e63664dca684fbd849454c5a2fe0d0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32017 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22mb/google/hatch: Add SX9310 SAR0 sensorEvan Green
Add SAR0, which is an SX9310. The schematics and layout have a second SAR1 sensor provisioned on I2C4, with an interrupt of GPP_A6, but this is not populated. Signed-off-by: Evan Green <evgreen@chromium.org> BUG=b:128540461 BRANCH=none TEST=Boot kernel with sx9310 driver, see it come up happily Change-Id: I63943cc7da5ff56f6ef6dcbd99bb8f8f031e8bf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-22mb/google/hatch: Enable HUNG_TASK wake interruptEvan Green
Enable the HUNG_TASK as a wakeup host event, as it's used by S0ix failure detection to wake the system back up if a suspend to S0ix never asserted S0_SLP#. BUG=b:123716513 BRANCH=None TEST=Test S0ix on Hatch with appropriate EC and kernel changes. Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I447211892df210af97e8df0380bab032b14cbee8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32004 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-21soc/intel/cannonlake: Assign FSP UPDs for HPD and Data/CLK of DDI portsKrishna Prasad Bhat
Assign the FSP UPDs for HPD and DDC of DDI ports. FSP assumes that all DDI ports are enabled and hence configures the HPD and CLK for DDI ports. This patch initializes only the required UPDs to enable display ports. BUG=b:123907904 TEST=DP devices working correctly. Change-Id: Ic0c172cd3d087fc8f49b01ab23feffdababf7166 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-15mb/google/hatch: Enable TBMC deviceDtrain Hsu
This change enables tablet mode ACPI device for all hatch boards. BUG=b:125355874 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I4d3818497172828d750b34fe91cbb6cc65e69fc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-14mb/google/hatch: Define GPP_C13 as EC_SYNC_IRQPhilip Chen
BUG=b:125933998 CQ-DEPEND=CL:1510513 BRANCH=None TEST=manually verify on hatch, chromeos-ec interrupt count increases Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I1dd38ca5aed1e0ddecb4738910cbfa92de33d315 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31814 Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-14mb/google/hatch: fix RCompResistor[0] valueShelley Chen
From doc#573387 CML System Memory DQ DQS Rcomp Mapping Information User Guide, RCompResistor[0] should be 121. BUG=b:122959294 BRANCH=None TEST=emerge coreboot and make sure boots up Change-Id: If69e7fb41e79d88d21b0e50fb65107a1686d696a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31868 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-14mb/google/hatch: Update DRAM IDsShelley Chen
Update Hatch DRAM IDs to use the new DRAM ID assignment for general spds: 0 = 4G 2400 1 = 4G 2666 2 = 8G 2400 3 = 8G 2666 4 = 16G 2400 5 = 16G 2666 BUG=b:122959294 BRANCH=None TEST=emerge coreboot and make sure boots up Change-Id: Ic47737ce37597318bb794b63a47ced2467d8bbb0 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-14mb/google/hatch: Use MEM_CH_SEL to indicate single_channel skuShelley Chen
MEM_CH_SEL is used to indicate whether we are on a single or dual channel device, where MEM_CH_SEL = 1 for single channel skus and MEM_CH_SEL = 0 for dual channel skus. Initialize single_channel field (from GPP_F2), which will in turn initialize MemorySpdPtr pointers in cannonlake soc code. In the first build, we did not use GPP_F2, so we need to add an internal pulldown as those early devices were all dual channel devices. BUG=b:123062346, b:122959294 BRANCH=None TEST=Boot into current boards and ensure that we have 2 channels as expected Also, verify that GPP_F2 is set to 0. Change-Id: I89d022793580be603a93d0b177d73ce968529b5c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-11mb/google/hatch: Enable audio supportSathya Prakash M R
Following changes are done to enable audio support on hatch 1. Enable I2C4 device at 400Khz at 1.8V 2. Configure GPIO for HP INT and SPKR_PA_EN 3. Add ACPI entry for RT5682 and MAX98357A 4. Enable I2S0 and I2S1 lines 5. Enable generic max98357a driver in Kconfig BUG=b:123738217 BRANCH=none TEST=Check SSDT table for RT5682 & MAX98357a entry. Verify audio using Sound Open firmware (SOF) Change-Id: I93f3917c19cc3f0f8fd7b5e1b4d9b24a59f45f84 Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-08mb/google/hatch: Initialize all gpiosShelley Chen
BUG=b:123490912 BRANCH=None TEST=flash BIOS and make sure hatch boots up properly Change-Id: I9e41f0b38703f2c7a2b5a7ac9b108f8f10070004 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31724 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-28mb/google/hatch: Add GPIO programming for GPP_C0 to GPP_C7Maulik V Vaghela
coreboot did not program all GPIOs from C0 to C7 correctly which are SMBUS GPIO. Some of the GPIOs are left in default mode which is native function but we need to configure as GPIO mode and provide proper configuration as per schematic. After fixing GPIO, CSME power gating issue also gets fixed since SMBUS was not getting idle due to GPIO configuration and CSME was not getting power gated due to SMBUS. BUG=b:123702553 BRANCH=none TEST=Check on hatch board. CSME was not getting power gated for s0ix. After applying this patch CSME is power gated now Change-Id: I5c6b9310dcc7bade0023abd5524781ce71df28be Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-27mb/google/hatch: Initialize GPIO_PCH_WP early in bootRizwan Qureshi
Initialize GPIO_PCH_WP early in boot. Update cros_gpios[] array with GPIO_PCH_WP information. Also, Configure recovery mode GPIO as virtual since hatch does not have one. BUG=b:125943273 Change-Id: I0b7e6dbf9229941aca4952965fb54f07457dccae Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/31599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-27mb/google/hatch: update SD card detect GPIORizwan Qureshi
SD_CD# in Cannonlake PCH is also wired to an internal virtual GPIO, expose that GPIO for kernel to configure card detect IRQ. BUG=b:123350329 Change-Id: I566cc2eb11dc257366897a1efba905b8ddcf493d Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/31553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-22mb/google/hatch: Enable wake from trackpadShelley Chen
For some reason, wake does not currently work from GPP_D21, but IRQs are working fine from that gpio. Thus, we have to switch IRQ to GPP_D21 and wake to GPP_A21, which was previously used for IRQs from the trackpad. Additionally, we need to use two gpios for irqs and wake source at the moment because of b:123967687, where FSP is locking down PCR and configuring ITSS. We need to configure the wake source gpio as inverted and the IRQ gpio as non-inverted until the bug is resolved. BUG=b:121212459 BRANCH=None TEST=run evtest with trackpad Use trackpad with ChromeOS UI and make sure it reacts as expected. Run powerd_dbus_suspend and press trackpad and make sure DUT wakes. Change-Id: I7b236136befc05c6586d9ba69185ed4b5d385273 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-15mb/google/hatch: Enable DPTF functionalitySumeet Pawnikar
Enable DPTF functionality on hatch platform. Change-Id: If9ef74364616f95b27b73c39fea42d2623d78ae2 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/31276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-13mb/google/hatch: Configure GPIO pad for non-inversionAamir Bohra
This implementation configures GPIO (GPP_A21, GPP_C21, GPP_D16) pad in non-inversion mode i.e Rx PAD state is not inverted as it is sent from GPIO to IOAPIC. BUG=b:123315212 TEST=Tested for below: -> Verify touchpad is working fine. -> TPM init is successful and boot with fixed boot media. Change-Id: I6034fd07ccc96a19218d57ef8bb9049c4b963ea5 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/31328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-02-08mb/google/hatch: Replace part-specific SPD files with generic onesShelley Chen
Traditionally, we have always allocated 1 DRAM ID per part number. However, on nami, we have run out of DRAM IDs because we have supported so many different parts. We are now adopting the use of generic SPD files that are feature-based rather than specific to each part, allowing us to support multiple parts with a single SPD. The common SPDs were created by taking current SPDs in Nami (which is using the same DDR4 parts as Hatch) and zeroing out all the manufacturer information and part names. Additionally, we zeroed out bytes 128 (raw card extension, module nominal height), 129 (module maximum thickness), and 130 (reference raw card used) after verifying that they are not used in FSP. We verified with these fields zeroed out, all nami devices could boot up without errors. We also verified on the two Hatch skus that we have (4G 2400, 8G 2666) that the generic SPDs boot properly. BUG=b:122959294 BRANCH=None TEST=Make sure that we can boot up on both 4G Samsung and 8G Hynix DDR4 devices that we currently have. Change-Id: I14d9e6b13975b6a65b506e6cd475160711b8f6d4 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-06mb/google/hatch: Configure I2C busesFurquan Shaikh
This change enables I2C bus 2, 3 and 4 in devicetree and configures GPIO pads for the same. It also configures pads for I2C5 as no-connect. BUG=b:123711244 TEST=Verified that i2c shows up in "i2cdetect -l" after booting to OS. Change-Id: Ib4714a670d73228332115415e4393f82802c6475 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/31237 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-05mb/google/hatch: Add keyboard backlight supportIvy Jian
This change adds keyboard backlight feature for Hatch platform. BUG=b:122799544 BRANCH=none TEST=keyboard backlight works when EC reports correct info. Change-Id: I29273122f061e0e442f6629351ef3670535c0507 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31175 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-05mb/google/hatch: Add USB port capability ACPI support for USB2 port10Aamir Bohra
This implementation adds support to create ACPI package for USB port capability (_UPC) and physical location of device (_PLD) for USB2 port 10. BUG:b:123375275 TEST:Verify _UPC and _PLD ACPI packages gets published for USB2 Port 10 in SSDT and BT is functional in discrete and integrated mode. Change-Id: Ifeab24505a700e8e4677be20074c7d0400769cec Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/31197 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-01mb/google/hatch: Enable S0ixShelley Chen
BUG=b:123540469 BRANCH=None TEST=None Change-Id: I713e6ad70efdd152895afa45aee44a5b53a8136b Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31157 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30mb/google/hatch: Enable AP Wake from ECShelley Chen
Initialize EC_PCH_WAKE_ODL GPIO to make sure that ec events will wake the AP from suspend. Also create a task to initialize the hostevent wake mask properly. BUG=b:123325238,b:123325720 BRANCH=None TEST=from AP console: powerd_dbus_suspend from EC console: hostevent (make sure wake mask set) from EC console: gpioset PCH_WAKE_L 0 Make sure device wakes up Also, checked to make sure keyboard press wakes up device from S3. Change-Id: I53d5291a6b9ab9a21e89ccd21f172180ce473bd5 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24mb/google/hatch: Enable support for WWANMaulik V Vaghela
This patch enables relevant GPIOs to enable WWAN. WWAN also requires to enable USB 2 port 6 and USB3 port 5 which is already enabled in device tree related changes. BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I1559bbc6168aec1a369bf3291d2c1e2f9a2fbe07 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24mb/google/hatch: Enable PCIe WLAN and BTMaulik V Vaghela
Enable PCIe WLAN for hatch 1. Enable PCI port 14 for PCIe WLAN 2. Enable CLKREQ, CLK SRC 3 for PCI port 14 3. GPIO pad config for WLAN and BT USB port for BT has already been enabled so not included in this patch BUG=b:120914069 BRANCH=none TEST=check if code compiles correctly and verify GPIO configuration with schematics Change-Id: I4f2a6eb37a467ad8b8cdde8fe6b657fabb383b04 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-23mb/google/hatch: Enable SD card support for hatchMaulik V Vaghela
Enable support for SD card support for hatch 1. Enable PCI device for SD and also configure SD detect GPIO 2. Configure SD card related GPIOs in gpio.c BUG=b:120914069 BRANCH=none TEST=Verify GPIO configuration with schematics Change-Id: I8ccaa28323b1e1fcc192e245347a96309227660b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-17mb/google/hatch: Configure miscellaneous featuresRonak Kanabar
set SaGv = SaGv_Enabled , To Enable System Agent dynamic frequency support set HeciEnabled = 1, To Enable heci communication set speed_shift_enable = 1 To Enable Speed Shift Technology support Change-Id: Iea90a65a77ef5e45a802cfe6fd31e1921163b02b Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/30774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-01-14mb/google/hatch: Use USB2 Port 10 for BT over CnViAamir Bohra
Integrated BT controller in CnVi uses USB port 10 for communication. BUG=b:122552619 TEST=lsusb shows BT device Change-Id: Iad1ca0e9419b534f50a3ce3fdcbd660caf8efb5c Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30809 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10mb/google/hatch: enable CPU cluster deviceAamir Bohra
Change-Id: I28c67fbdf2b4f371c4b533b64cad2c4376ca2bd2 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30785 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-09mb/google/hatch: Disable the SA IPU for hatchV Sowmya
This patch disables the SA IPU for hatch since it is not using the IPU. Change-Id: Ib2afc4cc4fd7ef98365b0b98130b0e8bc757ac2a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-07mb/google/hatch: Enable touch panel supportMaulik V Vaghela
Following changes are done to enable touch screen support on hatch 1. Enable I2C1 device at 400Khz at 3.3V 2. Configure GPIO for touch screen 3. Add ACPI entry for ELAN touch panel 4. update GPIO table with not connected GPIO pins for panel BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I8dab07dad4cb197865bb9cf0e8da240810fcfabe Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-01mb/google/hatch: Enable CNVi Wifi for hatchMaulik V Vaghela
This patch enables CNVi wifi for hatch 1. Enable CNVi device in device tree 2. Configure GPIO pad config for CNVi BUG=b:120914069 BRANCH=none TEST=check if code compiles correctly and verify GPIO configuration with schematics Change-Id: I0c5542737d3a629b6a40116b4aa8ab6cbdd6a4dc Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30436 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-01mb/google/hatch: Add NC gpios for display and correct the orderMaulik V Vaghela
Correcting order of display related GPIOs and also adding not connected pin definitions for display GPIOs BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I9498284d263516f65513d6395883b6b09dd70fd5 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-12-31mb/google/hatch: Enable NVME support for HatchV Sowmya
This patch enables the x4 NVME device for hatch, * Enable the Root port 9. * Assign the usage type for clock source. * Configure the GPIO for CLK SRC 1. BUG=b:120914069 BRANCH=none TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot. Change-Id: I69be6b21a5ae5962877a5c38180b5ffac532fed4 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30431 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-31mb/google/hatch: Add the USB port configurationV Sowmya
This patch adds the configurations for, * USB 2.0 ports. * USB 3.0 ports. * Enables USB xHCI controller. * GPIO config for USB2_OC2 and USB2_OC3. * Add the ACPI objects to configure USB ports. BUG=b:120914069 BRANCH=none TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot. Change-Id: Ia7b25c25b8208c678aeae3a32033611b69b54062 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30457 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-31mb/google/hatch: Enable SATA for HatchV Sowmya
This patch enables the SATA for hatch, * Enable the SATA port 1. * Configure the GPIO for SATA. BUG=b:120914069 BRANCH=none TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot. Change-Id: Iaf800d1531688c3d3b82600038ea1d7160ae4b0b Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30435 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-29mb/google/hatch: Enable Host Bridge/CSME/PMC/P2SB/SMBusRizwan Qureshi
* Enable host bridge. * Enable CSME. * Enable Power Management Controller. * Enable Primary to Side Band Bridge Controller. * Enable SmBus Controller. BUG=b:120914069 BRANCH=None TEST=code compiles with the changes Change-Id: I2fbf0ece845a7114ce5ab7f6482a935d9275deee Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/30465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-28mb/google/hatch: Enable SPI controller for HatchRizwan Qureshi
Enable SPI controller(D31:F5). BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I4d3acd3f31650d5b39927f8e3cfbb6187541653f Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/30438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-28mb/google/hatch: Enable console UARTMaulik V Vaghela
This patch incorporates following changes to enable console on UART0 1. update default console number to 0 2. Enable PCI port for UART0 GPIO configuration will be done by coreboot based on correct console number. Change-Id: I735d33674b276b28e2cbb753d3a6d83edbabe89d Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-12-28mb/google/hatch: Enable LPC/eSPI controllerAamir Bohra
Enable LPC/eSPI controller(D31:F0). EC would be using eSPI interface, since the strap GPP_C5 is pulled up. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ia4baf80a775ba8898055f82e80dc583e65c4ed0b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-12-25mb/google/hatch: Add HPD GPIO support for displaysMaulik V Vaghela
Adding hot plug detect GPIO support for external Type-C display in event for cable connect/disconnect. Change-Id: If9d52dc0f9916f761c8fdd88c76968aaf663e650 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30365 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-25mb/google/hatch: Enable EC LPC interface and configure IO decode rangeAamir Bohra
Enable EC LPC interface and configure below LPC IO decode ranges: 1. 0x200-020F: EC host command range. 2. 0x800-0x8FF: EC host command args and params. 3. 0x900-0x9ff: EC memory map range. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ie5d92df80d6b3a5913d0cbe78c1b8eefb5269d4a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add SoC and EC asl files in DSDTAamir Bohra
This implementation adds below code: 1. Add SOC ACPI code in dsdt.asl -> platform.asl -> globalnvs.asl -> cpu.asl -> northbridge.asl -> southbridge.asl -> sleepstate.asl 2. Add chromeos.asl in dsdt.asl 3. Add EC ACPI code in dsdt.asl -> superio.asl -> ec.asl 4. Remove config for WAK/PTS ACPI method as chromeec doesn't implement those. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Icf1b1d7e34a7e863139c3583903f3b1e2cdc8da6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-25mb/google/hatch: Add EC trigger events and acpi configsAamir Bohra
This implemetation adds EC SCI, SMI, S5/S3 wake trigger events. Also adds the EC specific ACPI configs to enable support for ALS, EC PD device and PS2 keyboard device. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I3a86f609c269cb59e546fc7ba4ba032e5ea8341a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30281 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-23mb/google/hatch: Enable IGD (Integrated GFX Device)Maulik V Vaghela
This patch ensures following 2 features 1. Enable IGD controller in devicetree.cb 2. Pass required FSP UPD to perform internal graphics initialization Change-Id: I607199590d793a70e1e20bb3241fc34467aa829d Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-23mb/google/hatch: Add memory init setup for hatchAamir Bohra
This implementation adds below support: 1. Add support to read memory strap. 2. Add support to configure below memory parameters -> rcomp resistor configuration -> dqs mapping -> ect and ca vref config 3. Include SPD configuration BUG=b:120914069 BRANCH=None TEST=USE="-intel_mrc -bmplk" emerge-hatch coreboot Change-Id: I9bda08bd0b9f91ebb96b39291e15473492a6bf19 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30248 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-22mb/google/hatch: Enable Elan TrackpadShelley Chen
BUG=b:120914069 BRANCH=None TEST=USE="-intel_mrc" emerge-hatch coreboot Change-Id: I91db5745d1db16ab4b2fbb7f8c415bd7c1eb29e9 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-22mb/google/hatch: Fixes to initial hatch mainboard checkinShelley Chen
Incorporating some feedback to initial hatch mainboard checking (CL:30169) that came in after the CL merged. Updated the chromeos.fmd with the following, * SI_ALL = 3MB * SI_BIOS = 16MB BUG=b:20914069 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a -v Change-Id: I4e311c68873f10f71314e44d3a714639a06dbee8 Signed-off-by: Shelley Chen <shchen@google.com> Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30296 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-21mb/google/hatch: Enable H1 TPM support over SPI interfaceAamir Bohra
Add code support to enable H1 TPM interfaced to SOC on GSPI0. The TPM interrupt is mapped to GPP_C21. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: Ib63a0b473f632d91745102ebd01993e8d65b9552 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30210 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-21mb/google/hatch: Clean up gpio definitions in hatch variantAamir Bohra
This implementation cleans up gpio configuration functions and limit definition to baseboard only for now, until variant specfic overides are needed. BUG=b:120914069 TEST=USE="-intel_mrc -bmpblk" emerge-hatch coreboot Change-Id: I563f6b97812b32d6e3d99e3df512dc112da78aea Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30291 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-13mb/google/hatch: Creating skeleton directories and filesShelley Chen
Creating skeleton files and directories in mainboard for the new Hatch board. This is to facilitate development for different parties involved. BUG=None BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I5fc60c178f83034abe5d846d0f4169072b66f448 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-21 22:15:25 +0000