summaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/spd
AgeCommit message (Collapse)Author
2019-06-09mb/google/hatch: Add 16G 2666 LPDDR3 SPDShelley Chen
One variant is asking for support for 16G 2666 LPDDR3, so adding generic SPD for that. BUG=b:133455595 BRANCH=None TEST=None as this is not being used yet Change-Id: If16a101119aabc30d6ea83e95e9ded2e089a982d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-09mb/google/hatch: Add 8G 3200 SPDShelley Chen
One variant is asking for support for 8G 3200 DDR4, so adding generic SPD for that. BUG=b:132920013 BRANCH=None TEST=None as this is not being used yet Change-Id: I89cd3287aaf0baf384c4fe82d0881b0c48e09753 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33258 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29mb/google/hatch/variants/kohaku: Add support for LPDDR3 configurationsPaul Fagerburg
First configuration supported is 8 GB system memory: 4 x 2 GB (K4E6E304ED-EGCG). BRANCH=none BUG=b:129706819 TEST=ensure the firmware builds without error; I don't have hardware available to test this just yet. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: Ibd92d585118ff75492e8a7188dcdb2a286836d56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-08mb/google/hatch: Replace part-specific SPD files with generic onesShelley Chen
Traditionally, we have always allocated 1 DRAM ID per part number. However, on nami, we have run out of DRAM IDs because we have supported so many different parts. We are now adopting the use of generic SPD files that are feature-based rather than specific to each part, allowing us to support multiple parts with a single SPD. The common SPDs were created by taking current SPDs in Nami (which is using the same DDR4 parts as Hatch) and zeroing out all the manufacturer information and part names. Additionally, we zeroed out bytes 128 (raw card extension, module nominal height), 129 (module maximum thickness), and 130 (reference raw card used) after verifying that they are not used in FSP. We verified with these fields zeroed out, all nami devices could boot up without errors. We also verified on the two Hatch skus that we have (4G 2400, 8G 2666) that the generic SPDs boot properly. BUG=b:122959294 BRANCH=None TEST=Make sure that we can boot up on both 4G Samsung and 8G Hynix DDR4 devices that we currently have. Change-Id: I14d9e6b13975b6a65b506e6cd475160711b8f6d4 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-23mb/google/hatch: Add memory init setup for hatchAamir Bohra
This implementation adds below support: 1. Add support to read memory strap. 2. Add support to configure below memory parameters -> rcomp resistor configuration -> dqs mapping -> ect and ca vref config 3. Include SPD configuration BUG=b:120914069 BRANCH=None TEST=USE="-intel_mrc -bmplk" emerge-hatch coreboot Change-Id: I9bda08bd0b9f91ebb96b39291e15473492a6bf19 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30248 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>