summaryrefslogtreecommitdiff
path: root/src/mainboard/google/gru
AgeCommit message (Collapse)Author
2016-07-28google/gru & kevin: Update DRAM configurationLin Huang
We need to enable DRAM ODT on kevin/gru board to improve the DRAM signal. Note, if the DRAM ODT is enabled and set to 120ohms, the sdram VREF need to adjust to 840mv. This patch also makes following changes: 1. For compatiblity with the old board, add the "sdram-lpddr3-hynix-4GB-666-no-odt.inc" and "sdram-lpddr3-hynix-4GB-800-no-odt.inc" files which do not enable sdram ODT. 2. Delete the 300MHz dram inc file. The 300MHz sdram config just reduced 666MHz to 300MHz based on the 666MHz config file, and it is not stable, so delete it. 3. Delete the 928MHz dram inc file, 928MHz sdram config still in debuging, delete it for now. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Change-Id: If0248e1bc4cef2c298762080f1ca018653af0521 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 78d8a28e2d3489c99c9bba2c1c9aa76812e2e33f Original-Change-Id: I35f0685782d6fb178a95780ec77c45f565dd2194 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358763 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15813 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-28chromeos: Clean up elog handlingFurquan Shaikh
1. Currenty, boot reason is being added to elog only for some ARM32/ARM64 platforms. Change this so that boot reason is logged by default in elog for all devices which have CHROMEOS selected. 2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that want to add details about watchdog reset in elog. This requires a special region WATCHDOG to be present in the memlayout. 3. Remove calls to elog add boot reason and watchdog reset from mainboards. BUG=chrome-os-partner:55639 Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use of verified boot library without having to stick to CHROMEOS. BUG=chrome-os-partner:55639 Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15867 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-25google/gru: Change UART _Static_assert() condition to #ifJulius Werner
_Static_assert() gets evaluated even when the code path it's in is unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that depend on a disabled Kconfig are always 0, meaning that CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the condition it is wrapped in to a preprocessor #if so that the _Static_assert() is not evaluated when building without serial support. BRANCH=None BUG=None TEST=Built and booted Kevin without serial Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524 Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361581 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15810 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-18gru: implement hw reset functionVadim Bendebury
Asserting this GPIO will send a signal to the EC to trigger a reset for the AP and the CR50. BRANCH=none BUG=chrome-os-partner:55252 TEST=the device now reboots when it needs to switch between different boot modes instead of hanging with "failed to reboot" message. Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7 Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/360238 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15718 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-13gru: Enable TPM2Vadim Bendebury
Gru and derivative boards use TPM2 to support Chrome OS verified boot. BRANCH=none BUG=chrome-os-partner:50645 TEST=re-built Kevin firmware, verified that TPM2 support over SPI is enabled, and that with appropriate vboot and depthcharge patches applied the device can boot into chrome os properly verifying RW firmware and kernel key indices. Change-Id: Id14a51cea49517bd2cc090ba05d71385aad5b54c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 60e229d93d7e219e261b851f654e459eb2cf4f41 Original-Change-Id: Ic6f3c15aa23e4972bf175b2629728a338c45e44c Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354781 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: https://review.coreboot.org/15606 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-13oak/gru: Fix derivative KconfigsJulius Werner
Add a few missing Kconfig defaults for derivatives of the Oak and Gru baseboards. Also group all Kconfigs that must change for derivatives together for easier updating. BRANCH=None BUG=None TEST=None Change-Id: I95ebb08b4f13f09f2539b451d7b96a826ddf98f8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ae3f13c1dc323f4c7c4a176a4f5e1285fec312ce Original-Change-Id: I658130e88daa2d113fd722b0527cf0e7ab66c7ef Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357922 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15605 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-12google/gru: Read RAM & board ids from the ADCShelley Chen
- Update so that the RAM id is read from ADC instead of hard-coded from the config array. - Update the boardid readings so that they are bucketed instead of within an error margin. BRANCH=None BUG=chrome-os-partner:54566,chrome-os-partner:53988 TEST=hexdump /proc/device-tree/firmware/coreboot/ram-code and boardid when OS boots up. Also verified that voltage read in debug output returns correct id. Change-Id: I963406d8c440cd90c3024c814c0de61d35ebe2fd Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 068705a38734d2604f71c8a7b5bf2cc15b0f7045 Original-Change-Id: I1c847558d54a0f7f9427904eeda853074ebb0e2e Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/356584 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/15586 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12google/gru: Enable coreboot read recovery eventShelley Chen
Enable reading of keyboard recovery host event from coreboot. BUG=None BRANCH=None TEST=esc+refresh+power combo and make sure you see recovery fw screen. Change-Id: I166619d6202e23569395434e9dc1adb2a6a53296 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f9279c8c06abb170589b1b11bf5287fbf38c9905 Original-Change-Id: Id980c77c8d7695b2c1b3343d968ad2a302d42aaa Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357841 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: https://review.coreboot.org/15585 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12google/gru: enable EC software syncShelley Chen
Enable CONFIG_EC_SOFTWARE_SYNC. Crossystem needs this to get ec RW/RO info. BUG=chrome-os-partner:54566 BRANCH=None TEST=1. apreset from ec console. Check for "VbEcSoftwareSync() check for RW update" string in ap console. 2. Run "ectool version" from OS to check that RO/RW version are different and that we're in RW: RO version: kevin_v1.1.4818-8243672 RW version: kevin_v1.1.4762-1957187 Firmware copy: RW 3. Run crossystem ecfw_act. check for RW return value. Change-Id: If6524f2cca4a6223ab9704d0af827e8c1072670f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0deb0e1c69d6bf21acf7640bf76f9196e14437d7 Original-Change-Id: I0db8235cf7d472f0aa642eea1998282d010d3433 Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357811 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15584 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-10gru: include ram_code in coreboot tableVadim Bendebury
This is needed to ensure that the ram-code node is included in the device tree by depthcharge. BRANCH=none BUG=chrome-os-partner:54566 TEST=built updated firmware, booted on kevin into Linux shell, checked the device tree contents: localhost ~ # od -tx1 /proc/device-tree/firmware/coreboot/ram-code 0000000 00 00 00 01 0000004 localhost # Change-Id: Ibe96e3bc8fc0106013241738f5726783d74bd78b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 53c002114f7044b88728c9e17150cd3a2cf1f80f Original-Change-Id: Iba573fba9f9b88b87867c6963e48215e254319ed Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354705 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15566 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24rockchip/rk3399: provide multiple SDRAM configurationsLin Huang
We want to be able to easily change SDRAM clock rate for debugging purposes. This patch adds configurations for 4 different clock rates. Same configs are used for all rk3399 boards at 200, 666 and 800 MHz. Kevin board does not run reliably at 666 MHz, an option for it is added to run at 300 MHz, this option is available to Kevin only. There is not much room left in the coreboot romstage section, this is why the config file for 928 MHz is being added with this patch but is not included in the code, one of the lower frequency options will have to be dropped for the higher frequency option to be added. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 3600" and pass on both kevin and gru. Verified that on Kevin the firmware reports starting up SDRAM at 300 MHz and on Gru at 800 MHz. Change-Id: Ie24c1813d5a0e9f0f9bfc781cade9e28fb6eb2f1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ef5e4551b79c3f0531f9af35491f2c593f8482f1 Original-Change-Id: I08bccd40147ad89d851b995a8aab4d2b6da8258a Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353493 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15309 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add elog supportSimon Glass
Add code to start up elog. This uses the EC RTC to obtain the timestamp. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages Change-Id: I4971d661b267ae8b7e3befeff482ca703b741743 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e4e9823d8cecbf9873e78b048e389c7a737ff512 Original-Change-Id: I0fcf55b3feccf9a0ad915deb6d323b65bf2e9811 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353822 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15306 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add get_developer_mode_switch()Simon Glass
Add this function and make it return 0, as there is no physical dev switch (at least I think this is what we are supposed to do). This is needed for elog to work, which is needed so we can test RTC properly. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages: elog_init() SF: Detected W25Q64 with sector size 0x1000, total 0x800000 elog_find_flash() FMAP: area RW_ELOG found @ 5d8000 (32768 bytes) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) ELOG: flash area invalid elog_flash_erase(address=0x000000000031d668 offset=0x005d8000 size=4096) SF: Successfully erased 4096 bytes @ 0x5d8000 elog_prepare_empty() elog_flash_write(address=0x000000000031d668 offset=0x005d8000 size=8) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) elog_is_header_valid() elog_update_event_buffer_state() elog_is_buffer_clear(base=0x000000000031d670 size=4088) elog_is_area_valid() ELOG: FLASH @0x000000000031d668 [SPI 0x005d8000] ELOG: area is 4096 bytes, full threshold 3834, shrink size 1024 elog_add_event_raw(type=16) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d670 offset=0x005d8008 size=11) ELOG: Event(16) added with size 11 elog_add_event_raw(type=17) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d67b offset=0x005d8013 size=13) ELOG: Event(17) added with size 13 elog_add_event_raw(type=A0) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d688 offset=0x005d8020 size=9) ELOG: Event(A0) added with size 9 elog_add_boot_reason: Logged dev mode boot I can't actually see the timestamp, but the EC traffic is visible. Change-Id: I82bcf296dce4f4d146edf90b23bfae955fbe9e3a Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ffc7a7e0e7b136144d2a0b2ed21a543eafee49fa Original-Change-Id: I1489c6b874cc49495635aec0bf303f7098455716 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353821 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15305 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Show the current time on start-upSimon Glass
Display the current time from the EC. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) boot on gru and see output: Date: 1970-01-17 (Saturday) Time: 1:42:44 Then reboot ~10 seconds later and see output: Date: 1970-01-17 (Saturday) Time: 1:42:53 Change-Id: I4288efc56f00e47f7575d0379a44871351da6200 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d0361193e0ec135e21f0611d7fa6e5c02f2b2bfc Original-Change-Id: I04a072c788ba3fc915e6d73703f966955bbd3e7e Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351783 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15304 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Enable EC-based RTCSimon Glass
Obtain the real-time clock value from the EC on start-up and show the current time. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) with future commits and EC clock set, boot on gru into Linux shell and check the firmware log: localhost ~ # grep Date: /sys/firmware/log Date: 2016-06-20 (Monday) Time: 18:09:16 Change-Id: Id3ef791f546419c4881a891251cbb62d7596884b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 348e9373b0e95a17f5c39ec28a480712e6e45caf Original-Change-Id: Iff43b16a86d9fee483420ee2eff5ff3d276716a3 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351781 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15303 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23rockchip/rk3399: correct sdram inc file DENALI_CTL_217_DATA valueLin Huang
for per cs training, there should be more cycles to switch delay line. so increase W2W_DIFFCS_DLY_F0 value from 0x1 to 0x5. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 1000" and pass Change-Id: I11720b7c6f009789b88ca26fc5da88597ed1622e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9de93beae09174d50a31d2df655529f71628f77c Original-Change-Id: Ide23fff04fd63fb0afc538b610b7685756f79f8d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/352953 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15307 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23gru: kevin: initialize cr50 SPI interfaceVadim Bendebury
Set up the pins and initialize the driver. BRANCH=none BUG=chrome-os-partner:50645, chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to communicate with the cr50. Change-Id: I9fc1cb84ccababa6f58b2d5beec4572dc1d79da1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 6100471db2a00fd411afc05d621429b8f8a2f81d Original-Change-Id: I0ccd8777288e35870658268813c9202dd850c70d Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349852 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/15296 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: kevin/gru: Slow memory down to 300 MHzDouglas Anderson
At the higher speeds stressapptest shows memory errors. We don't want to track down random problems due to simple memory corruption, so slow memory back down to 300 MHz until someone figures out how to make it faster without sacrificing reliability. BRANCH=None BUG=chrome-os-partner:54144 TEST=stressapptest -M 1024 -s 240 Change-Id: I2417f93f65b1491a028a63ce563ed7dd7831becc Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: I02182b25e677e27e8541445938f9da9ae9553fa6 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/350480 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15120 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: gru: pass poweroff gpio parameter to BL31Lin Huang
To support gpio power off SOC, we need to pass the power off gpio parameter to BL31. Gru reuse tsadc overtemp pin as power off gpio, so need to iomux to gpio function when use gpio power off function, either in bl31 or depthcharge. BRANCH=None BUG=chrome-os-partner:53448 TEST=Build gru Change-Id: Ibfe64042f39f6df1b87536b50fe432859bf74426 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: Ie7a1bbea4a12753f0abac7a9142f2e032686ce31 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349703 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15119 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: gru: pass reset gpio parameter to BL31Lin Huang
To support gpio reset SOC, we need to pass the reset gpio parameter to BL31. Note: request BL31 have supported this function. BRANCH=None BUG=chrome-os-partner:51924 TEST=Build gru Change-Id: I182cff11ce6f5dc3354db0dc053c128b813acf9f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: I8283596565d552b1f3db31c28621a1601c226999 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349702 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15118 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-12rockchip: gru: Add USB DRD DWC3 controller supportLiangfeng Wu
This patch adds code to initialize the two DWC3 USB host controllers, and uses them to initialize USB3.0 on the gru rk3399 board. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB3.0 on gru/kevin rk3399 platform Change-Id: If6a6e56f3a7c7ce8e8b098634cfc2f250a91810d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0306a9e Original-Change-Id: I796fa1133510876f75873d134ea752e1b52e40a8 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/347524 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15112 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08rockchip: rk3399: Add support i2sXing Zheng
This patch enable and configure the clocks and IOMUX for i2s audio path, and the i2s0 clock is from CPLL. Please refer to TRM V0.3 Part 1 Chapter 3 CRU, P126/P128/P144/P154/P155 for the i2s clock div and gate setting. BRANCH=none BUG=chrome-os-partner:52172 TEST=boot kevin rev1, press ctrl+u and hear the beep voice. Change-Id: Id00baac965c8b9213270ba5516e1ca684e4304a6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c58fa7 Original-Change-Id: I130a874a0400712317e5e7a8b3b10a6f04586f68 Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/347526 Original-Commit-Ready: Wonjoon Lee <woojoo.lee@samsung.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15034 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: enable EC SPI interfaceVadim Bendebury
This configures and enables SPI interface #5 used for EC communications on Gru/Kevin. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the appropriate depthcharge change it is possible to trigger booting Chrome OS from the SD card by pressing '^U' on Gru keyboard at the right time. Change-Id: I5304bf47e030c0b9b7794752f30ffdca6c03a4f4 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: b5cc177 Original-Change-Id: I99883daa60562ccddfaeb858c1957d497f05a501 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346632 Reviewed-on: https://review.coreboot.org/15032 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: configure board GPIOsVadim Bendebury
Set board GPIOs as required and add their description into the appropriate section of the coreboot table, to make them available to depthcharge. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to use keyboard on Gru, which indicates that the EC interrupt GPIO is properly configured. The rest of the pins will be verified later. Change-Id: I5818bfe855f4e7faa2114484a9b7b44c7d469727 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e02a05f Original-Change-Id: I82be76bbd3211179e696526a34cc842cb1987e69 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346631 Reviewed-on: https://review.coreboot.org/15031 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: define GPIOs used on both platformsVadim Bendebury
The same GPIOs are used on both platforms, definitions are added an a new .h to make it easier to re-use them across the code. BRANCH=none BUG=chrome-os-partner:51537 TEST=panel backlight still enabled on Gru as before. The rest of the GPIOs are used in the upcoming patches. Change-Id: If06f4b33720ab4bf098d23fb91322bba23fe6e90 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c587880 Original-Change-Id: I1a6c5b5beb82ffcc5fea397e8e9ec2f183f4a7e0 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346219 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/15029 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-07Kevin/Gru : Update Board ID table.jongpil19.jung
Add board id table as kevin/gru configuration. BUG=chrome-os-partner:53519 BRANCH=chromeos-2016.02 TEST=check boot on Kevin board. Change-Id: I30c16916f3cda0ac88d2ce5a922e936a405fcc89 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 16c7b5486befd73c3e31624970ba1c97e526676f Original-Change-Id: Ib69ed9dad8e1a9e08717545c6be19a90e0298c43 Original-Signed-off-by: jongpil19.jung <jongpil19.jung@samsung.com> Original-Reviewed-on: https://chromium-review.googlesource.com/345736 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15028 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-07rockchip: gru: update the hynix lpddr3 config to run at 928MHzShunqian Zheng
Update the DDR config and DRAM driver to allow running at up to 928MHz. Kevin config/clock rate are not being changed, but Gru now runs at 928 MHz. BRANCH=none BUG=chrome-os-partner:51537 TEST=booted Kevin and Gru to Linux prompt. Ran stressapptest for 10 min on Gru, Change-Id: I66c1a171d5c7d05b2878c7bc5eaa0d436c7a1be2 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8baf0d82816a7ea1c4428e15caeefa2795d001f9 Original-Change-Id: I5e1d6d1025f10203da8f11afc3bbdf95f133c586 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/343984 Original-Reviewed-by: Stephen Barber <smbarber@chromium.org> Reviewed-on: https://review.coreboot.org/15027 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03rockchip: gru: enable eDP displayLin Huang
This patch enables eDP display by: o. setting HPD pinmux, backlight, vdd for eDP o. setting vop mode o. enabling VGA configs for edid BRANCH=none BUG=chrome-os-partner:51537 TEST=The dev screen is shown on kevin board Change-Id: If8b07307454daa88727d317cc208d6c97de07ad7 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: b1ad9337510f5437f691153dc68883edf273e4c7 Original-Change-Id: Id7006619b5be638b286a5402d892a5361ac1e430 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340026 Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14858 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-18rockchip: rk3399: enable sdhci clk for emmcShunqian Zheng
If booting from sdcard/usb, kernel can't recognize the /dev/mmcblk0. Before kernel find it's root cause, we add this workaround patch to enable clk for emmc. BRANCH=none BUG=chrome-os-partner:52873 TEST=boot from sdcard and check the /dev/mmcblk0 exists Change-Id: Ie36cc6fdbc24db8c30984c02ccfe2f8aaaf30cd2 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 39b87ec3c73d6f56efc8c3f52b7ed759e548ee85 Original-Change-Id: I88a9cc2e3ea5a56aadfdbd94ef910daaf92a7eb7 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341632 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14856 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: configure emmc clkLin Huang
Select aclk_emmc and clk_emmc source from GPLL, and both to 198MHz, that is GPLL(594MHz) divided by 3. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot kevin rev1 to chromeos prompt from both emmc and sdcard TEST=LoadKernel faster, more than twice as I measured manually. Change-Id: I2580c43b8c79049c3fe16bbf60bfa1a8e0559948 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 5fd37b66dcce77354e1cafab0d6e806d832c08d2 Original-Change-Id: Id22815b302af3204e0e5537af99c1577b09b0877 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/339152 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14855 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rk3399: set proper configuration of SDMMC interfaceVadim Bendebury
For proper interface operation the drive strength on all pins is set to 8 mA and all pull ups/pull downs disabled, this matches the current kernel configuration. BRANCH=none BUG=chrome-os-partner:53257 TEST=it is possible to boot Chrome OS on Gru from various micro SD cards which were failing to boot before. Change-Id: Ie43e52a52cd0513d48d0ecc8ac02fbb100baf9a4 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 6bb0549ed728ac3c5faab6cbe16e2487400e67ed Original-Change-Id: I5180537d3ceb74a9a2f7b3982ca94d3e2daf0369 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/344491 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14853 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18gru: set correct gpio for SD card detectVadim Bendebury
The only outlier at this time is Kevin rev 0, treat it specially, the rest of the targets use the same GPIO. BRANCH=none BUG=none TEST=gru still boots off SD card just fine Change-Id: Ic603093a990d27166b16175db3303f155b4775aa Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 5788c5add1d1f803e7b22fb53215b6003ac04d03 Original-Change-Id: Ic5183f08dd1119f9588f243bd9e9c080d84687f9 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/344151 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14851 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18Gru: support 4GB sdram on gruLin Huang
now we use 4GB sdram on gru board, enable it. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot from kevin board Change-Id: Icc483a8ba91c5deea85e6e4009a8a132851b1853 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: efa94aee02bedf51d73c91059b06afcbb1320282 Original-Change-Id: I26f77ff4ad9b2aa35ab5ff50f23984796f4f06bc Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342585 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14850 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-09google/gru: enable pp1500 and pp3000 rails as soon as possibleVadim Bendebury
The idea is that they stay low unless we know that we booted from SPI flash. As this code runs in SPI flash - it is ok to turn these rails on as soon as possible, and pp3000 rail it is essential for UART to work. Kevin rev1 and Gru designs are going to be using these pins to control these rails. Kevin rev1 had those GPIO pins routed to two chip enable signals, it is save to assert them high. BRANCH=none BUG=chrome-os-partner:51537 TEST=kevin rev0 still boots (which does not prove much) TEST=run coreboot on kevin rev1 to kernel Change-Id: I5f3eb4cf5d6f04a0253574dd8b5c039eab0bae1a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 987042246672e9391087dbd5060785a379dde131 Original-Change-Id: I31bb03334ad9e3aa57db726fb43dec85014a3f05 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/341543 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: kevin: use board version specific SD detect GPIO pinVadim Bendebury
This change reflects Kevin schematics differences, Gru will have to be addressed separately. BRANCH=None BUG=None TEST=the code still works fine on Kevin proto 1. Change-Id: Iecae0e82e6bd4d185b49587b6053dcef8ad2162d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e821bbebe902a293b1e78cdd868f6bf3548ddd30 Original-Change-Id: Icd606285aeca1e19189f5e3d24c09b376942708b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340429 Original-Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/14728 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: select 1.8V as gpio2ab io domainLin Huang
On kevin board, both the gpio2ab's io domain APIO2_VDDPST and APIO2_VDD are 1.8V. So gpio2ab can only output 1.8V. BRANCH=none BUG=chrome-os-partner:52510 TEST=Apply this patch, CPU1_SDIO_PWREN(GPIO2_A2) can output 1.8V Change-Id: Iefe58cf5ad83a8e79916ad177d148c1036283668 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c4afee265f3f31c1defee08cb89ab3e45ff8d1a Original-Change-Id: I0216c8efb7ef9256b878adeeee0a52335bf69f93 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/337194 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14726 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: add board nameVadim Bendebury
Gru is the common name of a set of coreboot boards, each of them has the config option BOARD_GOOGLE_GRU enabled. Now we need to add the actual board called Gru to the set. Let's rename the common config option to BOARD_GOOGLE_GRU_COMMON and use BOARD_GOOGLE_GRU for the actual board. BRANCH=none BUG=none TEST=with corresponding depthcharge and configuration space changes it is possible to build the Gru board which boots the kernel using the proper compatibility string of google,gru-rev0 Change-Id: I363d4b690b7549f50ed75d77b56e6a1e1d17b60f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 327ecc0de20ac0b93ec3cd28ef398393d4ea7c42 Original-Change-Id: Ia43278225c2d32d2af37193a77ea792551c9f8d9 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340793 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14724 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: Determine Board ID based on the input voltage of ADC1Vadim Bendebury
The Board ID on the Gru family of boards is determined by reading the voltage from a resistor divider, each hardware revision is supposed to have a unique resistor ratio, which allows to distinctly tell between different Board ID. While the long time approach to mapping resistor ratios (and voltages) into Board ID remains under discussion, we know for sure the values for Proto 1 and Proto 2. Let's just use them for now. Since Board ID can be queried multiple times during boot, ideally it should be read once and placed in the coreboot table to be available to all coreboot stages. For now we just cache it so that at least during the same stage the ADC has to run only once. BRANCH=None BUG=chrome-os-partner:51537 TEST=verified that the voltage reading on Proto 1 is as expected, and Board ID 0 is reported. Change-Id: I94bc7fc235dae4155feb6ca35b5ef0ab20c3ec9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bb4064d0af8174b6ae247cdad9378b7f4e5f22ba Original-Change-Id: I105ea97f8862b5707b582904c6f2e3e9406a0f07 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340428 Original-Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/14722 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: power up SD cardVadim Bendebury
Make sure SD card is powered up properly. Please refer to TRM V0.3 Part1 Page 324 for sdmmc pinmux. BRANCH=none BUG=chrome-os-partner:51537 TEST=With other patches, boot into chromeos prompt Change-Id: Ib53b05c1fce851ca7cbcc2207fce2dce3b1bfe9a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d37e688a458749e331a50c2ebf2018cba6629823 Original-Change-Id: I9f67c0bc16ddefa5ebe52a10c6d9e54194828a89 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/337192 Reviewed-on: https://review.coreboot.org/14718 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add sdram driverLin Huang
Add the sdram driver for rk3399. With this patch we can boot into depthcharge. This patch also include a config file for lpddr3-hynix-4GB that generated bases on its datasheet. Please refer to TRM V0.3 Part1 Chapter 9 for DMC. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot to depthcharge on kevin Change-Id: I2afcaa3b68dbad77a5fe677b835289b675ed2bef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5d777e29942057fb7237eefa34051d1f54b19405 Original-Change-Id: Ifa1fe98a7058869518757d50678a64620610d91d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332562 Reviewed-on: https://review.coreboot.org/14716 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add spi clock driverShunqian Zheng
This patch implements spi clock driver and initialize SPI flash rom for the baseboard gru. There are 6 on-chip SPI controllers inside RK3399. For SPI3, it's source clk from ppll, while the others from gpll. Please refer to CRU session of TRM for detail. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I597ae2cc8ba1bfaefdfbf6116027d009daa8e049 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4c6a9b0aedd427727ed4f4a821c5c54fb3a174b9 Original-Change-Id: I68ad859bf4fc5dacaaee5a2cd33418c729cf39b8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338946 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: enable uart2 if configuredShunqian Zheng
This patch select gpio pins for UART2 which is the default debug port of rk3399. Please refer to TRM V0.3 Part1 Page 325,395 for GRF details. BRANCH=none BUG=chrome-os-partner:51537 TEST=check logs from console manually Change-Id: I91eeadd543e7e895c3972d8dd7a2195c9d78968b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0c51955e18d4ff9cd3208697666af4fa77046e0f Original-Change-Id: I960178628f4020a59d100f2f0b2a6be487892549 Original-Signed-off-by: hunag lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338945 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14709 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-16mainboard/google/gru: Add license header to memlayout.ldMartin Roth
I missed this license header, and it's causing a build breakage. Change-Id: If472e5c081bd282f0b482af629d6ec2314a2c329 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14388 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2016-04-16google/gru: Incorporate feedback to #14279Patrick Georgi
To avoid diverging too much on an actively developed code base, keep the changes to a separate commit that can be downstreamed more easily: - removed unused includes - gave kevin board a "Kevin" part number - marked RW_LEGACY as CBFS region (to follow up upstream changes) - moved romstage entry point to SoC code (instead of encouraging per-board copy pasta) Change-Id: Ief0c8db3c4af96fe2be2e2397d8874ad06fb6f1f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14362 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-16google/gru: Add a stub rk3399 mainboardhuang lin
Most things still need to be filled in, but this will allow us to build boards which use this SOC. [pg: separated out from the combined commit that added both SoC and board. Added board_info.txt that will be added downstream, too.] Change-Id: I7facce7b98a5d19fb77746b1aee67fff74da8150 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840 Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332385 Reviewed-on: https://review.coreboot.org/14279 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 04:33:23 +0000