summaryrefslogtreecommitdiff
path: root/src/mainboard/google/gru
AgeCommit message (Collapse)Author
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
Instead of defining the same functions for reading/clearing boot-mode switches from EC in every mainboard, add a common infrastructure to enable common functions for handling boot-mode switches if GOOGLE_CHROMEEC is being used. Only boards that were not moved to this new infrastructure are those that do not use GOOGLE_CHROMEEC or which rely on some mainboard specific mechanism for reading boot-mode switches. BUG=None BRANCH=None TEST=abuild compiles all boards successfully with and without ChromeOS option. Change-Id: I267aadea9e616464563df04b51a668b877f0d578 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17449 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-11-17google/gru: Move to one CA training patternDerek Basehore
This changes memory to only do CA training with one pattern, 0xfffff/0x00000 and to also make sure CA training waits for all of the captures during training. BRANCH=none BUG=chrome-os-partner:56940 TEST=boot kevin and run stressapptest -M 1500 -s 1000 Change-Id: I0982674b4f4415f4d7865923ced93fa09bdd877e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 75cdd911cea9c4e5744fd04505b260fa5755513c Original-Change-Id: I3b86e6d4662c6fbbf9ddef274fce191a367904e5 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/410320 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17383 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17google/gru: Add new CA training patternDerek Basehore
This adds a new CA training pattern for all of the supported frequencies. This pattern increases the hold time on CA. BRANCH=none BUG=chrome-os-partner:57845 TEST=boot kevin and run: while true; do sleep 0.1; memtester 500K 1 > /dev/null; done for several hours Change-Id: Ie5958cf67c16247ef90ee261da9faef4ffa5b339 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8babeafe75bffcb2dab17eb007b4f5bb0eb42606 Original-Change-Id: I7f7652f88e43dc9b2f6069e60514931bf7582ed1 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/403547 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17382 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: display: Do not allocate framebuffer in corebootLin Huang
framebuffer address is dynamically chosen by libpayload now, so there's no need to configure it in coreboot. CQ-DEPEND=CL:401402 BUG=chrome-os-partner:58675 BRANCH=none TEST=Boot from kevin, dev screen is visible Change-Id: I9f1e581d5c63b3579b26be22ce5c8d1e71679f6f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b3b6675420592c30e1e0abc8f8e9dd6ed5abd04c Original-Change-Id: I7e3162f24a4dc426fe4e10d74865cf0042c80db5 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/401401 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17109 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: sdram: also prepare the index1 configurationLin Huang
To enable DDR Dynamic Voltage and Frequency Scaling (DVFS) we need to train alternative configurations first, so do the training and store the values. BUG=None BRANCH=None TEST=Boot from kevin Change-Id: I944a4b297a4ed6966893aa09553da88171307a42 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94533ff3ba21bcb0ace00bedcf0cebb89a341be2 Original-Change-Id: I4a98bc0db5553d154fedb657e35b926a92aa80c7 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/386596 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17104 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25rockchip/rk3399: gru/kevin: drop unused sdram configsLin Huang
There are some sdram configurations that are no longer used. Drop them. BUG=None BRANCH=None TEST=None Change-Id: Ib6d2d58c3071147a3095bc1ed7fa7b02c748e1a5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 111d375005ec6a3b91e47acdd676e8f1644c931c Original-Change-Id: I5f9278093f02e785b2894faa8e8cf09ecec20325 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/399122 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17103 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25rockchip/rk3399: reset system if DDR init failsLin Huang
We found sdram may fail in pctl_cfg(), so we check the status in this function. If it exceeds 100ms still in this function, we will restart the system. We also found there are rare chances DDR training fails, so also restart system in that case. BUG=chrome-os-partner:57988 BRANCH=None TEST=coreboot resets on failure and eventually the system comes up Change-Id: Icc0688da028a8f4f81eafe36bbaa79fdf2bcea74 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89e45f8352f62e19a203316330aba14ccc5c8b11 Original-Change-Id: If4e78983abcfdfe1e0e26847448d86169e598700 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/397439 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17045 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-08google/gru: Add USB 2.0 PHY tuning for Kevin PHY0 and PHY1William wu
We found that Kevin board PHY0 and PHY1 eye-diagram margin is not enough to make compliance test pass, and the PHY0 USB SI is worse than PHY1, because of the higher PCB impedance. For PHY0, we can't improve the eye-diagram by SW PHY tuning, so we need to reduce the RBIAS resistance from 133 ohm to 115 ohm, it can help to increase the eye-height. For PHY1, we can improve the eye-diagram by setting the max pre-emphasis level. And after the above change, the USB2 signal amplitude will become larger at the test point near to SOC USB2 PHY, in order to avoid mis-trigger the disconnect detection (650mV), we need to disable pre-emphasize in eop state. BRANCH=None BUG=chrome-os-partner:53863 TEST=do USB 2.0 compliance test for Kevin C0 and C1 port. Change-Id: I95c0acd79623aeca9a0ae077b1dd3836d91fe561 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de3cdef128966d76e7d8e2ebd641763b911c3ad5 Original-Change-Id: I00cb325b9938e4276cc77b5d6f5faa7023379608 Original-Signed-off-by: William wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/390615 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16911 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: drive WLAN_MODULE_RST# low as early as possibleBrian Norris
GPIO1_B3 (WLAN_MODULE_RST#) defaults as a pull-up input, but it is also "pulled up" by 1.8V_WLAN. However, 1.8V_WLAN remains low for some time during early boot. This leaves the signal floating somewhere in the middle. This has two potential issues: (1) we're leaking some power for some (hopefully) short period of time (2) we are possibly screwing with the Wifi power sequence; we aren't supposed to deassert PDn (i.e., MODULE_RST#) until all the rails have fully ramped for some period of time Neither of the above issues are likely to be significant, but it is nice to fix, I expect. BRANCH=gru BUG=chrome-os-partner:54026 TEST=measure WLAN_MODULE_RST# on scope at boot time Change-Id: Ia6af9ad6954ad8feeda33015e3f205842380939e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0e890a2787bf034d3358a33fc88c2dd8078593ab Original-Change-Id: I120e26ad0ca486a326874986e142dcaee965b62d Original-Signed-off-by: Brian Norris <briannorris@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/388009 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16882 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: set W2W_DIFFCS_DLY to 5Lin Huang
PHY_PER_CS_TRAINING is being enabled when DDR frequency >= 666. For per cs training, the controller should consider the PHY delay line switch time and there should be more cycles to switch the delay line, so update the W2W_DIFFCS_DLY_ value from 0x1 to 0x5. BRANCH=none BUG=chrome-os-partner:56940 TEST=do memtester on kevin board, and pass Change-Id: I00df2d4724b0b77f3e7565809fb35bbd2ff01ea5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c135ea3e33d810ed322d947eb8d512d1ac119cfc Original-Change-Id: I81b99cbc085769b7028e770509d79bd8d550820b Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/387506 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16721 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: pass apio number to arm-trust-firmwareLin Huang
To save power when entering suspend, gpios 2 to 4 need to be set to input and 'pull none' mode. Pass the APIO configuration to ATF so it can do a proper job here. BRANCH=None BUG=chrome-os-partner:56423 TEST=run suspend_stress_test on kevin board Change-Id: Id57fe8f622ae3f9c2bc7e58be89518b2b846cd37 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c42082d1ca9a6baa735821382d3e83c1f8dc9ad Original-Change-Id: Iaf441e8e34c5591ffe7c65f6533fcf0b733ff5ac Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/378475 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: pass the gpio power supply enable pin to bl31Lin Huang
We need to disable some regulators when the device goes into suspend. This means that we need to pass some gpios to bl31, and disable these gpios when bl31 runs the suspend function. BRANCH=None BUG=chrome-os-partner:56423 TEST=enter suspend, measure suspend gpio go to low [pg: also update arm-trusted-firmware to match] Change-Id: Ia0835e16f7e65de6dd24a892241f0af542ec5b4b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f3332ef2136fd93f7faad579386ba5af003cf70 Original-Change-Id: I03d0407e0ef035823519a997534dcfea078a7ccd Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/374046 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16719 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip: rk3399: improve write leveling flowJianqun Xu
To improve sdram 800MHz and 933MHz stability, we need to modify write leveling flow to get the proper write leveling value. BUG=chrome-os-partner:56940 BRANCH=none TEST=Boot from kevin on 933MHz, and do stressapptest Change-Id: I5b24c93d4a57917fb9af7e5e2a95d8423ccbaa7e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d84bf25b3e5de373c7913e6d534a810cb984b3fd Original-Change-Id: I87efddf628c3683fcb85d6875e029cf3cbc482be Original-Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/384292 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16716 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06google/gru: Shrink RW_ELOG region to 4KBJulius Werner
Since there's currently a limitation in coreboot's code that prevents more than 4KB to be used by the eventlog anyway, this patch shrinks the available RW_ELOG area in the FMAP for Gru down to 4KB. This may prove prudent later if we ever resolve that limitation, so that tools can rely on the area in the FMAP being the same as the area actually used by the read-only firmware code on these boards. BRANCH=gru BUG=chrome-os-partner:55593 TEST=Booted Kevin, confirmed that eventlog got written normally. Ran a reboot loop to exhaust eventlog space, confirmed that the shrink code kicks in as expected before reaching 4KB. Change-Id: I3c55d836c72486665a19783fe98ce9e0df174b6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 05efb82ca00703fd92d925ebf717738e37295c18 Original-Change-Id: Ia2617681f9394e953f5beb4abf419fe8d97e6d3e Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/384585 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Simon Glass <sjg@google.com> Reviewed-on: https://review.coreboot.org/16715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip: rk3399: improve sdram noc timingLin Huang
sdram noc timing will affect ddr latency, this patch improves rk3399 sdram noc timing so improve memory performance. BRANCH=gru BUG=chrome-os-partner:57248 TEST=Boot from kevin board Change-Id: I09e984490a7ad747ef8abfc6542d0e2c95ec19bc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 43dfe55d713d371e39d21312772fd353614b7642 Original-Change-Id: I393e74ecdeb72930ac38ae9bcf311e5654f65162 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/382725 Original-Reviewed-by: Sonny Rao <sonnyrao@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Sonny Rao <sonnyrao@chromium.org> Original-Commit-Queue: Sonny Rao <sonnyrao@chromium.org> Reviewed-on: https://review.coreboot.org/16713 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip/rk3399: lower kevin board sdram frequency to 800MHzLin Huang
We found some boards are not stable when sdram is run at 933Mhz. Before we can fix it, we need to lower the sdram frequency to 800MHz. In this patch we modify the DQS delay from 0x280 to 0x260 and extend the DQS window. BRANCH=None BUG=chrome-os-partner:56940 TEST=Booted Kevin. Change-Id: I68561c4aa4d9ab66acfa3515a42d696157aff759 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 877a7f6ad22a5bde9f9e458bcb65f133f2f001bd Original-Change-Id: I5eab6bbe96f0dae095c5353403292022e7a25421 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/382724 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16709 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip/rk3399: Move big CPU cluster initialization into ramstageJulius Werner
This patch moves the big CPU cluster initialization on the RK3399 from the clock init bootblock function into ramstage. We're only really doing this to put the cluster into a sane state for the OS, we're never actually taking it out of reset ourselves... so there's no reason to do this so early. Also cleaned up the interface for rkclk_configure_cpu() a bit to make it more readable. BRANCH=None BUG=chrome-os-partner:54906 TEST=Booted Kevin. Change-Id: I568b891da0abb404760d120cef847737c1f9e3ec Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bd7aa7ec3e6d211b17ed61419f80a818cee78919 Original-Change-Id: Ic3d01a51531683b53e17addf1942441663a8ea40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/377541 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16698 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04google/gru: Ensure correct pull resistors for special-function pinsJulius Werner
Several of the special function pins we're using in firmware have a pre-assigned pull-up or pull-down on power-on reset. We don't want those to interfere with any of the signaling we're trying to do on those pins, so this patch disables them. Also do some house-cleaning to group the bootblock code better, and change the setup code for all SPI and I2C buses to first initialize the controller and then mux the pins... I assume this might be a little safer (in case the controller peripheral has some pins in a weird state before it gets fully initialized, we don't want to mux it through too early). BRANCH=None BUG=chrome-os-partner:52526 TEST=Booted Kevin. Change-Id: I4d5bd3f7657b8113d90b65d9571583142ba10a27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f8f7fd56e945987eb0b1124b699f676bc68d0560 Original-Change-Id: I6bcf2b9a5dc686f2b6f82bd80fc9a1a245661c47 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/382532 Reviewed-on: https://review.coreboot.org/16711 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04gru: Increase SPI speed to 33MHzSimon Glass
Increase the SPI bus speed to speed up boot time. The maximum supported speed at 1.8V is 37.5MHz, and 33MHz is the next lowest convenient speed, given the clock parents. BUG=chrome-os-partner:56556 BRANCH=none TEST=boot on gru and see that things still work correctly. Total time spent on reading from SPI reduces from 185ms to 141ms. Change-Id: I71436c9e343b18360fa63d528dea5cfcfbc831e6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d7576f6e53e407af61160be142c3d589e864a8cf Original-Change-Id: I55a19f523817862e081d23469e94fd795456dd67 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381313 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16708 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-04google/gru: Init the PWM pinmux after setting up the PWMDouglas Anderson
If we setup the PWM _after_ the pinmux then there's a period of time when we're driving the PWM incorrectly. Let's setup the regulator and _then_ configure the pinmux. This fixes no known bugs, but it is more correct and probably makes the signals look better at bootup. BRANCH=None BUG=None TEST=scope Change-Id: I311c0eded873b65e0489373e87b88bcdd8e4b806 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fcf4d0ba29d82cce779c0b25ead36de4a95d97a1 Original-Change-Id: I5124f48d04a18c07bbd2d54bc08ee001c9c7e8d1 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381592 Original-Reviewed-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16700 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-09-20gru/kevin: Decrease voltage for little cpu 1.5G to 1.15vShunqian Zheng
In kernel side we set 1.1v for 1.5G, even for coreboot RO, a higher voltage could be safer, 1.2v now seems too high. BRANCH=none BUG=chrome-os-partner:56948 TEST=bootup Change-Id: I852e0d532369aad51b12770e2efb01aacf6662ce Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 000b5c099373be2a1f83c020ba23a0e79ea78fab Original-Change-Id: Iecc620deee553c61a330353ac160aa3a36f516df Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/380896 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16583 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20google/gru: Fix up PWM regulator rangesJulius Werner
We did yet another small adjustment to the PWM regulator ranges for Kevin rev6... this patch reflects that in code. Also rewrite code and descriptions to indicate that these new ranges are not just for Kevin, but also planned to be used on Gru rev2 and any future Gru derivatives (which as I understand it is the plan, right?). BRANCH=None BUG=chrome-os-partner:54888 TEST=Booted my rev5, for whatever that's worth... Change-Id: Id78501453814d0257ee86a05f6dbd6118b719309 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4e8be3f09ac16c1c9782dee634e5704e0bd6c7f9 Original-Change-Id: I723dc09b9711c7c6d2b3402d012198438309a8ff Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/379921 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16580 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20Gru: Increase bit-per-pixel to 32Daisuke Nojiri
This enhances gradation of some icons on vboot screens. BUG=chrome-os-partner:56056 BRANCH=none TEST=Booted kevin-tpm2 Change-Id: I2fc943f89386ccc6cd9293f5811182a5a51d99b0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: bb1f0fb00d023c045305edc6c9fc655b764a4e8c Original-Change-Id: Ieb61830b9555da232936087cdcf7c61a1e55bab4 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376883 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16579 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru: Add watchdog reset supportJulius Werner
This patch adds support to reboot the whole board after a hardware watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to Veyron. From my tests it looks like both SRAM and PMUSRAM get preserved across warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that makes it easier to deal with in coreboot (PMUSRAM is currently not mapped as cached, so we don't need to worry about flushing the results back before reboot). BRANCH=None BUG=chrome-os-partner:56600 TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30 seconds. Confirm that system reboots correctly without entering recovery and we get a HW watchdog event in the eventlog. Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098 Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/375562 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16578 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru: Add USB 2.0 PHY tuning for KevinJulius Werner
This patch sets some magic number in magic undocumented registers that are rumored to make USB 2.0 signal integrity better on Kevin. I don't see any difference (unfortunately it doesn't solve the problems with long cables on my board), but I guess it doesn't hurt either way. BRANCH=None BUG=chrome-os-partner:56108,chrome-os-partner:54788 TEST=Booted Kevin with USB connected through Servo. Seems to have roughly the same failure rate as before. Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84 Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/370900 Original-Reviewed-by: Guenter Roeck <groeck@chromium.org> Original-Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-on: https://review.coreboot.org/16265 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-31rockchip/rk3399: Add pwm_regulator.c for pwm then ramp boot up cpuEric Gao
Before, we calculate the pwm duties for cpu cores and centerlogic by hand, adding pwm_regulator.c to handle this. The default pwm design min/max voltage may be different between revs. With the pwm regulator, this patch changes the little cpu frequency from 600M to 1512M, and raises CPU voltage to 1.2V correspondingly. This also means we decide to drop the ES1 because it may fail to bootup with 1.5G ~ 1.2v. BRANCH=none BUG=chrome-os-partner:54376,chrome-os-partner:54862 TEST=Bootup on kevin board Change-Id: Id04c176bddfb9cdf3d25b65736e40249a85f6aa1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ee4365c787ec523b7ee1028ea100dcfbb331b3a9 Original-Change-Id: Ide75bbd92d1cbb14f934baeec0e38862bc08402b Original-Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364410 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16368 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31rockchip/rk3399: Move romstage.c to mainboard/gruShunqian Zheng
The romstage.c is more board related than soc specific, like setting the pwm regulators, so moving it to mainboard/gru. BRANCH=none BUG=chrome-os-partner:54819 TEST=Bootup on kevin board Change-Id: I83c6cde9f451480e47e2b4b549cedf65b345134c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 35feeb07131a6a9de4adde035236987391833474 Original-Change-Id: If2bf245302eb4fb20bb089c1b3ffa03909722443 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/375398 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16367 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27gru: Make SDRAM parameters individual struct files in CBFSJulius Werner
This patch changes Gru SDRAM parameters from structures that just get compiled into the romstage to individual CBFS files. This allows us to only load the parameter set we need for the board we're booting from flash, which reduces our boot time and the SRAM memory footprint required to hold the romstage. TEST=Booted Kevin. Change-Id: Ie88a515cbdb19a794ca0a230a56bcc82bed1e550 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16274 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-19rockchip/rk3399 & gru/kevin: support sdram 933MHz on kevinLin Huang
We should be running faster. Faster = better. BRANCH=None BUG=chrome-os-partner:54873 TEST=Boot; stressapptest -M 1028 -s 10000 Change-Id: I7f855960af3142efb71cf9c15edd1da66084e9d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 51bfd2abb1aba839bd0b5b85e9e918f3cc4fd94d Original-Change-Id: Iec9343763c1a5a5344959b6e8c4dee8079cf8a20 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/362822 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16241 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-18Kconfig: rename BOOT_MEDIA_SPI_BUS to BOOT_DEVICE_SPI_FLASH_BUSAaron Durbin
Provide a default value of 0 in drivers/spi as there weren't default values aside from specific mainboards and arch/x86. Remove any default 0 values while noting to keep the option's default to 0. BUG=chrome-os-partner:56151 Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16192 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-16Revert "rockchip: rk3399: enable sdhci clk for emmc"Shunqian Zheng
This reverts commit 462e1413 ("rockchip: rk3399: enable sdhci clk for emmc") Enabling this clock in coreboot is no longer needed as it's handled in the kernel driver now. BUG=chrome-os-partner:52873 TEST=boot from usb/sdcard and check there is /dev/mmcblk0 BRANCH=none Change-Id: I92cf51f175fe56a09ab9329b29a27c77ef4328e1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 5707d1269a253dabf825be120d1f9348ffaab6d0 Original-Change-Id: I8bca870c663d8ce8fac5daaaaf8225489f22ed13 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/367421 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16152 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-13Revert "gru: Show the current time on start-up"Julius Werner
This reverts commit 850e45f19f498eedd80da4a97a5ce641e2cec6d5. google_chromeec_init() is a weird function that can lead to confusing behavior. I'm not sure how it's meant to work on the boards that use it, but it causes problems on Kevin and other non-x86 boards have never used it either. It doesn't really do anything anyway (the EC works fine without an initial HELLO), so at best it's just a waste of time... let's take it back out. There's also no need to display the current time on every boot... other boards don't do that and the eventlog already fills the same purpose. Cut it out to avoid one extra host command overhead. BRANCH=None BUG=chrome-os-partner:55995 TEST=Recovery reasons now get correctly propagated across the EC reboot. Change-Id: Ic3b772780d4d05e362c269969e6e4e7069482bb6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 103d86e68cd164bea39aa1edc8668d80358edbde Original-Change-Id: I58fd5e6094e1c8cb6368e7a4569ab9231375fbc9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/367351 Original-Reviewed-by: Simon Glass <sjg@chromium.org> Original-Reviewed-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/16153 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-11rockchip/rk3399: Add code to neuter Type-C PHY for firmware USBJulius Werner
The Rockchip RK3399 integrates a USB Type-C PHY in charge of things like SuperSpeed line muxing for rotated cable orientations in the SoC. While fancy, this is very complicated and we don't want to implement support for the whole thing in firmware. The USB Type-C standard has intentionally been designed in a way that the USB 2.0 (HighSpeed) lines always "just work" in any orientation (by just shorting different pins in the connector together) so that simple use cases like ours can get basic USB functionality without much hassle. However, a semi-configured Type-C PHY can confuse USB 3.0 capable devices into thinking we're actually supporting SuperSpeed, and fail at that rather than establishing a reliable HighSpeed connection. This patch sets enough bits in the Type-C PHY to electrically isolate the SuperSpeed lines from the connector so that the connected device isn't going to get any fancy ideas and reliably falls back to USB 2.0. Also clean up the rest of the USB code while we're at it: avoid writing a few bits that are already in the right state from their reset values anyway, or reading values whose content we already know for this SoC. Rename the USB controllers to the name actually used in the Rockchip documentation (USB OTGx) rather than the name blindly copied from Exynos code (USB DRDx). BRANCH=None BUG=chrome-os-partner:54621 TEST=Plug a USB 3.0 Patriot Memory stick into both ports in all orientations, observe how it gets reliably detected now (safe for some known hardware issues on my board). Change-Id: Ifce6bcddd69f2e8f2e2a2f48faf65551e084da1e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c526906f998bf66067d3addb8b3d3a126c188b1e Original-Change-Id: Ie80a201a58764c4d851fe4a5098a5acfc4bcebdf Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/366160 Original-Reviewed-by: liangfeng wu <wulf@rock-chips.com> Original-Reviewed-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-by: <515506667@qq.com> Reviewed-on: https://review.coreboot.org/16125 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09google/gru: Fix rk3399-gru write protectDouglas Anderson
The write protect GPIO is active high, not active low. After fixing I can see this after removing the write-protect screw: $ crossystem | grep wpsw_boot wpsw_boot = 0 Putting the screw in shows: $ crossystem | grep wpsw_boot wpsw_boot = 1 Caution: this CL contains explicit material. It explicitly sets the pullup on the WP GPIO even though that's the boot default. BRANCH=None BUG=chrome-os-partner:55933 TEST=See desc. Change-Id: I23e17e3bbbe7dcd83e81814de46117491e61baaa Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e6969f4be42c00c6e88bbb14929cf0454462ad21 Original-Change-Id: Ie65db9cf182b0a0a05ae412f86904df6b239e0f4 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/366131 Original-Tested-by: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16115 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09google/gru: Update board/RAM ID ADC valuesJulius Werner
Looks like our hardware guys have decided to change some voltage ranges in the Gru/Kevin ADC IDs since we last wrote a table. This patch updates it to the latest values from the Spreadsheet of Truth. Also adds further values up to rev15. BRANCH=none BUG=none TEST=none Change-Id: I1aa093ca3abe952afd658eb7da01b325f798eaa0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e42b4685c91f01ce1cff61638b17042be9d575fd Original-Change-Id: I646fd03dc385df1a8f0af8cb85ff3128cc31f8d8 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/365111 Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16053 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-03google/gru: Add code to support I2C TPM for KevinJulius Werner
Coming Kevin revisions will switch back to an I2C TPM. This patch adds the required configuration options and code to support that. Since the TPM type can currently only be changed at compile time, we can no longer support older Kevins with the same image. In order to build for Kevin revisions < 5, you have to explicitly override the CONFIG_GRU_HAS_TPM2. BRANCH=None BUG=chrome-os-partner:55523 TEST=Compiled both Kevin and Gru, confirmed that bootblock and verstage binary had the appropriate code differences. Change-Id: I1b2abe0f331eb103eb0a84f773ee7521d31ae5d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3245bff937154f0f9f39894de9c98a75631d59d9 Original-Change-Id: I81a15c9fb037a7ca2d69818e46cbb4f9a5ae1989 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/364222 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16029 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-08-03google/gru: Add support for Gru rev1Julius Werner
This patch adds support for the Gru rev1 board. This board differs from rev0 by no longer relying on the I2C backlight booster and requiring the same ODT SDRAM settings as newer Kevin boards. BRANCH=None BUG=chrome-os-partner:55087 TEST=None Change-Id: I1428760540a0aaaa0c02c6cb5b0981294ba4df33 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8de7bcc78c6c48c251c85185e238cea7812f7a28 Original-Change-Id: I3cb49bc644190f35300e6c618b2934956fa88e5b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/364624 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16028 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-28google/gru & kevin: Update DRAM configurationLin Huang
We need to enable DRAM ODT on kevin/gru board to improve the DRAM signal. Note, if the DRAM ODT is enabled and set to 120ohms, the sdram VREF need to adjust to 840mv. This patch also makes following changes: 1. For compatiblity with the old board, add the "sdram-lpddr3-hynix-4GB-666-no-odt.inc" and "sdram-lpddr3-hynix-4GB-800-no-odt.inc" files which do not enable sdram ODT. 2. Delete the 300MHz dram inc file. The 300MHz sdram config just reduced 666MHz to 300MHz based on the 666MHz config file, and it is not stable, so delete it. 3. Delete the 928MHz dram inc file, 928MHz sdram config still in debuging, delete it for now. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Change-Id: If0248e1bc4cef2c298762080f1ca018653af0521 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 78d8a28e2d3489c99c9bba2c1c9aa76812e2e33f Original-Change-Id: I35f0685782d6fb178a95780ec77c45f565dd2194 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358763 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15813 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-28chromeos: Clean up elog handlingFurquan Shaikh
1. Currenty, boot reason is being added to elog only for some ARM32/ARM64 platforms. Change this so that boot reason is logged by default in elog for all devices which have CHROMEOS selected. 2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that want to add details about watchdog reset in elog. This requires a special region WATCHDOG to be present in the memlayout. 3. Remove calls to elog add boot reason and watchdog reset from mainboards. BUG=chrome-os-partner:55639 Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use of verified boot library without having to stick to CHROMEOS. BUG=chrome-os-partner:55639 Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15867 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-25google/gru: Change UART _Static_assert() condition to #ifJulius Werner
_Static_assert() gets evaluated even when the code path it's in is unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that depend on a disabled Kconfig are always 0, meaning that CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the condition it is wrapped in to a preprocessor #if so that the _Static_assert() is not evaluated when building without serial support. BRANCH=None BUG=None TEST=Built and booted Kevin without serial Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524 Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361581 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15810 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-18gru: implement hw reset functionVadim Bendebury
Asserting this GPIO will send a signal to the EC to trigger a reset for the AP and the CR50. BRANCH=none BUG=chrome-os-partner:55252 TEST=the device now reboots when it needs to switch between different boot modes instead of hanging with "failed to reboot" message. Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7 Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/360238 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15718 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-13gru: Enable TPM2Vadim Bendebury
Gru and derivative boards use TPM2 to support Chrome OS verified boot. BRANCH=none BUG=chrome-os-partner:50645 TEST=re-built Kevin firmware, verified that TPM2 support over SPI is enabled, and that with appropriate vboot and depthcharge patches applied the device can boot into chrome os properly verifying RW firmware and kernel key indices. Change-Id: Id14a51cea49517bd2cc090ba05d71385aad5b54c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 60e229d93d7e219e261b851f654e459eb2cf4f41 Original-Change-Id: Ic6f3c15aa23e4972bf175b2629728a338c45e44c Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354781 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: https://review.coreboot.org/15606 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-13oak/gru: Fix derivative KconfigsJulius Werner
Add a few missing Kconfig defaults for derivatives of the Oak and Gru baseboards. Also group all Kconfigs that must change for derivatives together for easier updating. BRANCH=None BUG=None TEST=None Change-Id: I95ebb08b4f13f09f2539b451d7b96a826ddf98f8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ae3f13c1dc323f4c7c4a176a4f5e1285fec312ce Original-Change-Id: I658130e88daa2d113fd722b0527cf0e7ab66c7ef Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357922 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15605 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-12google/gru: Read RAM & board ids from the ADCShelley Chen
- Update so that the RAM id is read from ADC instead of hard-coded from the config array. - Update the boardid readings so that they are bucketed instead of within an error margin. BRANCH=None BUG=chrome-os-partner:54566,chrome-os-partner:53988 TEST=hexdump /proc/device-tree/firmware/coreboot/ram-code and boardid when OS boots up. Also verified that voltage read in debug output returns correct id. Change-Id: I963406d8c440cd90c3024c814c0de61d35ebe2fd Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 068705a38734d2604f71c8a7b5bf2cc15b0f7045 Original-Change-Id: I1c847558d54a0f7f9427904eeda853074ebb0e2e Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/356584 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/15586 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12google/gru: Enable coreboot read recovery eventShelley Chen
Enable reading of keyboard recovery host event from coreboot. BUG=None BRANCH=None TEST=esc+refresh+power combo and make sure you see recovery fw screen. Change-Id: I166619d6202e23569395434e9dc1adb2a6a53296 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f9279c8c06abb170589b1b11bf5287fbf38c9905 Original-Change-Id: Id980c77c8d7695b2c1b3343d968ad2a302d42aaa Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357841 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: https://review.coreboot.org/15585 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-12google/gru: enable EC software syncShelley Chen
Enable CONFIG_EC_SOFTWARE_SYNC. Crossystem needs this to get ec RW/RO info. BUG=chrome-os-partner:54566 BRANCH=None TEST=1. apreset from ec console. Check for "VbEcSoftwareSync() check for RW update" string in ap console. 2. Run "ectool version" from OS to check that RO/RW version are different and that we're in RW: RO version: kevin_v1.1.4818-8243672 RW version: kevin_v1.1.4762-1957187 Firmware copy: RW 3. Run crossystem ecfw_act. check for RW return value. Change-Id: If6524f2cca4a6223ab9704d0af827e8c1072670f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0deb0e1c69d6bf21acf7640bf76f9196e14437d7 Original-Change-Id: I0db8235cf7d472f0aa642eea1998282d010d3433 Original-Signed-off-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357811 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15584 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-10gru: include ram_code in coreboot tableVadim Bendebury
This is needed to ensure that the ram-code node is included in the device tree by depthcharge. BRANCH=none BUG=chrome-os-partner:54566 TEST=built updated firmware, booted on kevin into Linux shell, checked the device tree contents: localhost ~ # od -tx1 /proc/device-tree/firmware/coreboot/ram-code 0000000 00 00 00 01 0000004 localhost # Change-Id: Ibe96e3bc8fc0106013241738f5726783d74bd78b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 53c002114f7044b88728c9e17150cd3a2cf1f80f Original-Change-Id: Iba573fba9f9b88b87867c6963e48215e254319ed Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354705 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15566 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24rockchip/rk3399: provide multiple SDRAM configurationsLin Huang
We want to be able to easily change SDRAM clock rate for debugging purposes. This patch adds configurations for 4 different clock rates. Same configs are used for all rk3399 boards at 200, 666 and 800 MHz. Kevin board does not run reliably at 666 MHz, an option for it is added to run at 300 MHz, this option is available to Kevin only. There is not much room left in the coreboot romstage section, this is why the config file for 928 MHz is being added with this patch but is not included in the code, one of the lower frequency options will have to be dropped for the higher frequency option to be added. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 3600" and pass on both kevin and gru. Verified that on Kevin the firmware reports starting up SDRAM at 300 MHz and on Gru at 800 MHz. Change-Id: Ie24c1813d5a0e9f0f9bfc781cade9e28fb6eb2f1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ef5e4551b79c3f0531f9af35491f2c593f8482f1 Original-Change-Id: I08bccd40147ad89d851b995a8aab4d2b6da8258a Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353493 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15309 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add elog supportSimon Glass
Add code to start up elog. This uses the EC RTC to obtain the timestamp. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages Change-Id: I4971d661b267ae8b7e3befeff482ca703b741743 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e4e9823d8cecbf9873e78b048e389c7a737ff512 Original-Change-Id: I0fcf55b3feccf9a0ad915deb6d323b65bf2e9811 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353822 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15306 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add get_developer_mode_switch()Simon Glass
Add this function and make it return 0, as there is no physical dev switch (at least I think this is what we are supposed to do). This is needed for elog to work, which is needed so we can test RTC properly. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages: elog_init() SF: Detected W25Q64 with sector size 0x1000, total 0x800000 elog_find_flash() FMAP: area RW_ELOG found @ 5d8000 (32768 bytes) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) ELOG: flash area invalid elog_flash_erase(address=0x000000000031d668 offset=0x005d8000 size=4096) SF: Successfully erased 4096 bytes @ 0x5d8000 elog_prepare_empty() elog_flash_write(address=0x000000000031d668 offset=0x005d8000 size=8) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) elog_is_header_valid() elog_update_event_buffer_state() elog_is_buffer_clear(base=0x000000000031d670 size=4088) elog_is_area_valid() ELOG: FLASH @0x000000000031d668 [SPI 0x005d8000] ELOG: area is 4096 bytes, full threshold 3834, shrink size 1024 elog_add_event_raw(type=16) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d670 offset=0x005d8008 size=11) ELOG: Event(16) added with size 11 elog_add_event_raw(type=17) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d67b offset=0x005d8013 size=13) ELOG: Event(17) added with size 13 elog_add_event_raw(type=A0) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d688 offset=0x005d8020 size=9) ELOG: Event(A0) added with size 9 elog_add_boot_reason: Logged dev mode boot I can't actually see the timestamp, but the EC traffic is visible. Change-Id: I82bcf296dce4f4d146edf90b23bfae955fbe9e3a Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ffc7a7e0e7b136144d2a0b2ed21a543eafee49fa Original-Change-Id: I1489c6b874cc49495635aec0bf303f7098455716 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353821 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15305 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Show the current time on start-upSimon Glass
Display the current time from the EC. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) boot on gru and see output: Date: 1970-01-17 (Saturday) Time: 1:42:44 Then reboot ~10 seconds later and see output: Date: 1970-01-17 (Saturday) Time: 1:42:53 Change-Id: I4288efc56f00e47f7575d0379a44871351da6200 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d0361193e0ec135e21f0611d7fa6e5c02f2b2bfc Original-Change-Id: I04a072c788ba3fc915e6d73703f966955bbd3e7e Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351783 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15304 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Enable EC-based RTCSimon Glass
Obtain the real-time clock value from the EC on start-up and show the current time. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) with future commits and EC clock set, boot on gru into Linux shell and check the firmware log: localhost ~ # grep Date: /sys/firmware/log Date: 2016-06-20 (Monday) Time: 18:09:16 Change-Id: Id3ef791f546419c4881a891251cbb62d7596884b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 348e9373b0e95a17f5c39ec28a480712e6e45caf Original-Change-Id: Iff43b16a86d9fee483420ee2eff5ff3d276716a3 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351781 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15303 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23rockchip/rk3399: correct sdram inc file DENALI_CTL_217_DATA valueLin Huang
for per cs training, there should be more cycles to switch delay line. so increase W2W_DIFFCS_DLY_F0 value from 0x1 to 0x5. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 1000" and pass Change-Id: I11720b7c6f009789b88ca26fc5da88597ed1622e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9de93beae09174d50a31d2df655529f71628f77c Original-Change-Id: Ide23fff04fd63fb0afc538b610b7685756f79f8d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/352953 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15307 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23gru: kevin: initialize cr50 SPI interfaceVadim Bendebury
Set up the pins and initialize the driver. BRANCH=none BUG=chrome-os-partner:50645, chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to communicate with the cr50. Change-Id: I9fc1cb84ccababa6f58b2d5beec4572dc1d79da1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 6100471db2a00fd411afc05d621429b8f8a2f81d Original-Change-Id: I0ccd8777288e35870658268813c9202dd850c70d Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349852 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/15296 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: kevin/gru: Slow memory down to 300 MHzDouglas Anderson
At the higher speeds stressapptest shows memory errors. We don't want to track down random problems due to simple memory corruption, so slow memory back down to 300 MHz until someone figures out how to make it faster without sacrificing reliability. BRANCH=None BUG=chrome-os-partner:54144 TEST=stressapptest -M 1024 -s 240 Change-Id: I2417f93f65b1491a028a63ce563ed7dd7831becc Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: I02182b25e677e27e8541445938f9da9ae9553fa6 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/350480 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15120 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: gru: pass poweroff gpio parameter to BL31Lin Huang
To support gpio power off SOC, we need to pass the power off gpio parameter to BL31. Gru reuse tsadc overtemp pin as power off gpio, so need to iomux to gpio function when use gpio power off function, either in bl31 or depthcharge. BRANCH=None BUG=chrome-os-partner:53448 TEST=Build gru Change-Id: Ibfe64042f39f6df1b87536b50fe432859bf74426 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: Ie7a1bbea4a12753f0abac7a9142f2e032686ce31 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349703 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15119 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21rockchip: gru: pass reset gpio parameter to BL31Lin Huang
To support gpio reset SOC, we need to pass the reset gpio parameter to BL31. Note: request BL31 have supported this function. BRANCH=None BUG=chrome-os-partner:51924 TEST=Build gru Change-Id: I182cff11ce6f5dc3354db0dc053c128b813acf9f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: Original-Change-Id: I8283596565d552b1f3db31c28621a1601c226999 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349702 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15118 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-12rockchip: gru: Add USB DRD DWC3 controller supportLiangfeng Wu
This patch adds code to initialize the two DWC3 USB host controllers, and uses them to initialize USB3.0 on the gru rk3399 board. BRANCH=none BUG=chrome-os-partner:52684 TEST=boot from USB3.0 on gru/kevin rk3399 platform Change-Id: If6a6e56f3a7c7ce8e8b098634cfc2f250a91810d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0306a9e Original-Change-Id: I796fa1133510876f75873d134ea752e1b52e40a8 Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com> Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/347524 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15112 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08rockchip: rk3399: Add support i2sXing Zheng
This patch enable and configure the clocks and IOMUX for i2s audio path, and the i2s0 clock is from CPLL. Please refer to TRM V0.3 Part 1 Chapter 3 CRU, P126/P128/P144/P154/P155 for the i2s clock div and gate setting. BRANCH=none BUG=chrome-os-partner:52172 TEST=boot kevin rev1, press ctrl+u and hear the beep voice. Change-Id: Id00baac965c8b9213270ba5516e1ca684e4304a6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 9c58fa7 Original-Change-Id: I130a874a0400712317e5e7a8b3b10a6f04586f68 Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/347526 Original-Commit-Ready: Wonjoon Lee <woojoo.lee@samsung.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15034 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: enable EC SPI interfaceVadim Bendebury
This configures and enables SPI interface #5 used for EC communications on Gru/Kevin. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the appropriate depthcharge change it is possible to trigger booting Chrome OS from the SD card by pressing '^U' on Gru keyboard at the right time. Change-Id: I5304bf47e030c0b9b7794752f30ffdca6c03a4f4 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: b5cc177 Original-Change-Id: I99883daa60562ccddfaeb858c1957d497f05a501 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346632 Reviewed-on: https://review.coreboot.org/15032 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: configure board GPIOsVadim Bendebury
Set board GPIOs as required and add their description into the appropriate section of the coreboot table, to make them available to depthcharge. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to use keyboard on Gru, which indicates that the EC interrupt GPIO is properly configured. The rest of the pins will be verified later. Change-Id: I5818bfe855f4e7faa2114484a9b7b44c7d469727 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e02a05f Original-Change-Id: I82be76bbd3211179e696526a34cc842cb1987e69 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346631 Reviewed-on: https://review.coreboot.org/15031 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: define GPIOs used on both platformsVadim Bendebury
The same GPIOs are used on both platforms, definitions are added an a new .h to make it easier to re-use them across the code. BRANCH=none BUG=chrome-os-partner:51537 TEST=panel backlight still enabled on Gru as before. The rest of the GPIOs are used in the upcoming patches. Change-Id: If06f4b33720ab4bf098d23fb91322bba23fe6e90 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c587880 Original-Change-Id: I1a6c5b5beb82ffcc5fea397e8e9ec2f183f4a7e0 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346219 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/15029 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-07Kevin/Gru : Update Board ID table.jongpil19.jung
Add board id table as kevin/gru configuration. BUG=chrome-os-partner:53519 BRANCH=chromeos-2016.02 TEST=check boot on Kevin board. Change-Id: I30c16916f3cda0ac88d2ce5a922e936a405fcc89 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 16c7b5486befd73c3e31624970ba1c97e526676f Original-Change-Id: Ib69ed9dad8e1a9e08717545c6be19a90e0298c43 Original-Signed-off-by: jongpil19.jung <jongpil19.jung@samsung.com> Original-Reviewed-on: https://chromium-review.googlesource.com/345736 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15028 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-07rockchip: gru: update the hynix lpddr3 config to run at 928MHzShunqian Zheng
Update the DDR config and DRAM driver to allow running at up to 928MHz. Kevin config/clock rate are not being changed, but Gru now runs at 928 MHz. BRANCH=none BUG=chrome-os-partner:51537 TEST=booted Kevin and Gru to Linux prompt. Ran stressapptest for 10 min on Gru, Change-Id: I66c1a171d5c7d05b2878c7bc5eaa0d436c7a1be2 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8baf0d82816a7ea1c4428e15caeefa2795d001f9 Original-Change-Id: I5e1d6d1025f10203da8f11afc3bbdf95f133c586 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/343984 Original-Reviewed-by: Stephen Barber <smbarber@chromium.org> Reviewed-on: https://review.coreboot.org/15027 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-03rockchip: gru: enable eDP displayLin Huang
This patch enables eDP display by: o. setting HPD pinmux, backlight, vdd for eDP o. setting vop mode o. enabling VGA configs for edid BRANCH=none BUG=chrome-os-partner:51537 TEST=The dev screen is shown on kevin board Change-Id: If8b07307454daa88727d317cc208d6c97de07ad7 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: b1ad9337510f5437f691153dc68883edf273e4c7 Original-Change-Id: Id7006619b5be638b286a5402d892a5361ac1e430 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340026 Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14858 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-18rockchip: rk3399: enable sdhci clk for emmcShunqian Zheng
If booting from sdcard/usb, kernel can't recognize the /dev/mmcblk0. Before kernel find it's root cause, we add this workaround patch to enable clk for emmc. BRANCH=none BUG=chrome-os-partner:52873 TEST=boot from sdcard and check the /dev/mmcblk0 exists Change-Id: Ie36cc6fdbc24db8c30984c02ccfe2f8aaaf30cd2 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 39b87ec3c73d6f56efc8c3f52b7ed759e548ee85 Original-Change-Id: I88a9cc2e3ea5a56aadfdbd94ef910daaf92a7eb7 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/341632 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14856 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rockchip: rk3399: configure emmc clkLin Huang
Select aclk_emmc and clk_emmc source from GPLL, and both to 198MHz, that is GPLL(594MHz) divided by 3. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot kevin rev1 to chromeos prompt from both emmc and sdcard TEST=LoadKernel faster, more than twice as I measured manually. Change-Id: I2580c43b8c79049c3fe16bbf60bfa1a8e0559948 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 5fd37b66dcce77354e1cafab0d6e806d832c08d2 Original-Change-Id: Id22815b302af3204e0e5537af99c1577b09b0877 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/339152 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14855 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18rk3399: set proper configuration of SDMMC interfaceVadim Bendebury
For proper interface operation the drive strength on all pins is set to 8 mA and all pull ups/pull downs disabled, this matches the current kernel configuration. BRANCH=none BUG=chrome-os-partner:53257 TEST=it is possible to boot Chrome OS on Gru from various micro SD cards which were failing to boot before. Change-Id: Ie43e52a52cd0513d48d0ecc8ac02fbb100baf9a4 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 6bb0549ed728ac3c5faab6cbe16e2487400e67ed Original-Change-Id: I5180537d3ceb74a9a2f7b3982ca94d3e2daf0369 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/344491 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14853 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18gru: set correct gpio for SD card detectVadim Bendebury
The only outlier at this time is Kevin rev 0, treat it specially, the rest of the targets use the same GPIO. BRANCH=none BUG=none TEST=gru still boots off SD card just fine Change-Id: Ic603093a990d27166b16175db3303f155b4775aa Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: 5788c5add1d1f803e7b22fb53215b6003ac04d03 Original-Change-Id: Ic5183f08dd1119f9588f243bd9e9c080d84687f9 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/344151 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14851 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-18Gru: support 4GB sdram on gruLin Huang
now we use 4GB sdram on gru board, enable it. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot from kevin board Change-Id: Icc483a8ba91c5deea85e6e4009a8a132851b1853 Signed-off-by: Martin Roth <martinroth@google.com> Original-Commit-Id: efa94aee02bedf51d73c91059b06afcbb1320282 Original-Change-Id: I26f77ff4ad9b2aa35ab5ff50f23984796f4f06bc Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/342585 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14850 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-05-09google/gru: enable pp1500 and pp3000 rails as soon as possibleVadim Bendebury
The idea is that they stay low unless we know that we booted from SPI flash. As this code runs in SPI flash - it is ok to turn these rails on as soon as possible, and pp3000 rail it is essential for UART to work. Kevin rev1 and Gru designs are going to be using these pins to control these rails. Kevin rev1 had those GPIO pins routed to two chip enable signals, it is save to assert them high. BRANCH=none BUG=chrome-os-partner:51537 TEST=kevin rev0 still boots (which does not prove much) TEST=run coreboot on kevin rev1 to kernel Change-Id: I5f3eb4cf5d6f04a0253574dd8b5c039eab0bae1a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 987042246672e9391087dbd5060785a379dde131 Original-Change-Id: I31bb03334ad9e3aa57db726fb43dec85014a3f05 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/341543 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: kevin: use board version specific SD detect GPIO pinVadim Bendebury
This change reflects Kevin schematics differences, Gru will have to be addressed separately. BRANCH=None BUG=None TEST=the code still works fine on Kevin proto 1. Change-Id: Iecae0e82e6bd4d185b49587b6053dcef8ad2162d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e821bbebe902a293b1e78cdd868f6bf3548ddd30 Original-Change-Id: Icd606285aeca1e19189f5e3d24c09b376942708b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340429 Original-Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/14728 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: select 1.8V as gpio2ab io domainLin Huang
On kevin board, both the gpio2ab's io domain APIO2_VDDPST and APIO2_VDD are 1.8V. So gpio2ab can only output 1.8V. BRANCH=none BUG=chrome-os-partner:52510 TEST=Apply this patch, CPU1_SDIO_PWREN(GPIO2_A2) can output 1.8V Change-Id: Iefe58cf5ad83a8e79916ad177d148c1036283668 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c4afee265f3f31c1defee08cb89ab3e45ff8d1a Original-Change-Id: I0216c8efb7ef9256b878adeeee0a52335bf69f93 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/337194 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14726 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: add board nameVadim Bendebury
Gru is the common name of a set of coreboot boards, each of them has the config option BOARD_GOOGLE_GRU enabled. Now we need to add the actual board called Gru to the set. Let's rename the common config option to BOARD_GOOGLE_GRU_COMMON and use BOARD_GOOGLE_GRU for the actual board. BRANCH=none BUG=none TEST=with corresponding depthcharge and configuration space changes it is possible to build the Gru board which boots the kernel using the proper compatibility string of google,gru-rev0 Change-Id: I363d4b690b7549f50ed75d77b56e6a1e1d17b60f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 327ecc0de20ac0b93ec3cd28ef398393d4ea7c42 Original-Change-Id: Ia43278225c2d32d2af37193a77ea792551c9f8d9 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340793 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14724 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: Determine Board ID based on the input voltage of ADC1Vadim Bendebury
The Board ID on the Gru family of boards is determined by reading the voltage from a resistor divider, each hardware revision is supposed to have a unique resistor ratio, which allows to distinctly tell between different Board ID. While the long time approach to mapping resistor ratios (and voltages) into Board ID remains under discussion, we know for sure the values for Proto 1 and Proto 2. Let's just use them for now. Since Board ID can be queried multiple times during boot, ideally it should be read once and placed in the coreboot table to be available to all coreboot stages. For now we just cache it so that at least during the same stage the ADC has to run only once. BRANCH=None BUG=chrome-os-partner:51537 TEST=verified that the voltage reading on Proto 1 is as expected, and Board ID 0 is reported. Change-Id: I94bc7fc235dae4155feb6ca35b5ef0ab20c3ec9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bb4064d0af8174b6ae247cdad9378b7f4e5f22ba Original-Change-Id: I105ea97f8862b5707b582904c6f2e3e9406a0f07 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340428 Original-Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/14722 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: power up SD cardVadim Bendebury
Make sure SD card is powered up properly. Please refer to TRM V0.3 Part1 Page 324 for sdmmc pinmux. BRANCH=none BUG=chrome-os-partner:51537 TEST=With other patches, boot into chromeos prompt Change-Id: Ib53b05c1fce851ca7cbcc2207fce2dce3b1bfe9a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d37e688a458749e331a50c2ebf2018cba6629823 Original-Change-Id: I9f67c0bc16ddefa5ebe52a10c6d9e54194828a89 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/337192 Reviewed-on: https://review.coreboot.org/14718 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add sdram driverLin Huang
Add the sdram driver for rk3399. With this patch we can boot into depthcharge. This patch also include a config file for lpddr3-hynix-4GB that generated bases on its datasheet. Please refer to TRM V0.3 Part1 Chapter 9 for DMC. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot to depthcharge on kevin Change-Id: I2afcaa3b68dbad77a5fe677b835289b675ed2bef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5d777e29942057fb7237eefa34051d1f54b19405 Original-Change-Id: Ifa1fe98a7058869518757d50678a64620610d91d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332562 Reviewed-on: https://review.coreboot.org/14716 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add spi clock driverShunqian Zheng
This patch implements spi clock driver and initialize SPI flash rom for the baseboard gru. There are 6 on-chip SPI controllers inside RK3399. For SPI3, it's source clk from ppll, while the others from gpll. Please refer to CRU session of TRM for detail. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I597ae2cc8ba1bfaefdfbf6116027d009daa8e049 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4c6a9b0aedd427727ed4f4a821c5c54fb3a174b9 Original-Change-Id: I68ad859bf4fc5dacaaee5a2cd33418c729cf39b8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338946 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: enable uart2 if configuredShunqian Zheng
This patch select gpio pins for UART2 which is the default debug port of rk3399. Please refer to TRM V0.3 Part1 Page 325,395 for GRF details. BRANCH=none BUG=chrome-os-partner:51537 TEST=check logs from console manually Change-Id: I91eeadd543e7e895c3972d8dd7a2195c9d78968b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0c51955e18d4ff9cd3208697666af4fa77046e0f Original-Change-Id: I960178628f4020a59d100f2f0b2a6be487892549 Original-Signed-off-by: hunag lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338945 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14709 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-16mainboard/google/gru: Add license header to memlayout.ldMartin Roth
I missed this license header, and it's causing a build breakage. Change-Id: If472e5c081bd282f0b482af629d6ec2314a2c329 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14388 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2016-04-16google/gru: Incorporate feedback to #14279Patrick Georgi
To avoid diverging too much on an actively developed code base, keep the changes to a separate commit that can be downstreamed more easily: - removed unused includes - gave kevin board a "Kevin" part number - marked RW_LEGACY as CBFS region (to follow up upstream changes) - moved romstage entry point to SoC code (instead of encouraging per-board copy pasta) Change-Id: Ief0c8db3c4af96fe2be2e2397d8874ad06fb6f1f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14362 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-16google/gru: Add a stub rk3399 mainboardhuang lin
Most things still need to be filled in, but this will allow us to build boards which use this SOC. [pg: separated out from the combined commit that added both SoC and board. Added board_info.txt that will be added downstream, too.] Change-Id: I7facce7b98a5d19fb77746b1aee67fff74da8150 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840 Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332385 Reviewed-on: https://review.coreboot.org/14279 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 01:01:35 +0000