coreboot.git - my copy of coreboot

Age	Commit message (Expand)	Author
2018-05-04	mainboard/google: Comment variant names in Kconfig	Martin Roth
2018-04-17	cbfs: Add cbfs_boot_load_file()	T Michael Turney
2018-03-08	google/scarlet: Adjust K&D power sequence from software	Brian Norris
2018-02-16	google/gru: Fix GPIO_WP pull and polarity for Scarlet	Julius Werner
2018-02-06	google/gru: Add another 512KB to the COREBOOT FMAP region	Julius Werner
2018-02-02	google/gru: Use newer version of Innolux P097PFG panel init code	Lin Huang
2018-01-29	google/scarlet: Add initialization sequence for Innolux P097PFG panel	Lin Huang
2018-01-29	rockchip/rk3399: Support LONG_WRITE type in MIPI DSI	Lin Huang
2018-01-18	security/tpm: Change TPM naming for different layers.	Philipp Deppenwiese
2018-01-18	security/tpm: Move tpm TSS and TSPI layer to security section	Philipp Deppenwiese
2018-01-08	google/gru: switch to spi2 for all scarlet based boards	Ege Mihmanli
2017-12-20	google/gru: Adjust to incorrect strapping resistors on Kevin	Julius Werner
2017-12-20	google/gru: Prettify strapping ID ADC table	Julius Werner
2017-12-12	google/scarlet: support INNOLUX P097PFG panel	Lin Huang
2017-12-11	google/gru: Stop mucking with unused I2S0 pins in codec config	Julius Werner
2017-12-11	google/gru: Change Scarlet SKU ID pins to pull-ups	Julius Werner
2017-12-07	google/scarlet: update Kingdisplay kd097d04 timing	Lin Huang
2017-12-07	google/gru: Add SKU ID for Scarlet	Julius Werner
2017-12-07	boardid: Switch from Kconfig to weak functions	Julius Werner
2017-12-07	boardid: Minor clean up and standardization	Julius Werner
2017-12-05	google/gru: update RAMID table	Lin Huang
2017-11-28	google/scarlet: support kd097d04 panel	Lin Huang
2017-11-28	google/gru: correct backlight gpio	Lin Huang
2017-11-28	rockchip/rk3399: support dual mipi dsi	Lin Huang
2017-11-22	google/gru: Add support for rainier	Ege Mihmanli
2017-11-20	google/gru: Add config for scarlet-derived boards	Ege Mihmanli
2017-11-17	mb/google: Add Chromebook marketing names	Jonathan Neuschäfer
2017-11-06	gru: Fix and export SPK_PA_EN GPIO for Scarlet	Julius Werner
2017-10-02	google/gru: Fix pmu1833_volsel handling	Julius Werner
2017-09-06	google/gru: Re-enable 3V rail GPIO on Scarlet	Julius Werner
2017-08-31	google/gru: Support Nefario rev0	Philip Chen
2017-08-18	include/device: Split i2c.h into three	Nico Huber
2017-08-06	rockchip: gpio: add gpio_pull argument in gpio_input_irq() function	Lin Huang
2017-08-01	google/gru: Correct Scarlet pwm regulator minimum value and maximum value	Lin Huang
2017-08-01	google/gru: Correct the Sdcard control gpio setting for Scarlet	Lin Huang
2017-08-01	google/gru: Use 1.8V powerdomain for gpio4cd on Scarlet	Lin Huang
2017-07-19	google/gru: Add support for Scarlet rev1	Julius Werner
2017-07-19	rockchip/rk3399: Adjust gpio_t format to match ARM TF	Julius Werner
2017-07-12	google/gru: Add Nefario	Philip Chen
2017-06-19	rockchip/rk3399: fix DRAM gate training issue	Lin Huang
2017-06-15	google/gru: drive the stronger pull-up for touchpad	Caesar Wang
2017-06-13	Consolidate reset API, add generic reset_prepare mechanism	Julius Werner
2017-06-08	device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INIT	Nico Huber
2017-05-18	google/scarlet: Enable innolux,p079zca MIPI panel	Nickey Yang
2017-05-11	google/gru: support 800M/928M frequency for bob	Caesar Wang
2017-05-11	rockchip/rk3399: enable DPLL SSC for DDR EMI test on bob	Caesar Wang
2017-05-05	Revert "google/scarlet: Enable innolux,p079zca MIPI panel"	Martin Roth
2017-05-05	google/scarlet: Enable innolux,p079zca MIPI panel	Nickey Yang
2017-05-03	google/gru: skip usbphy1 setup for Scarlet	philipchen
2017-04-28	google/gru: tpm on bob: cr50: add irq clear/irq status for tpm irq	Jeffy Chen
2017-04-25	google/gru: change the sd power sequence	Caesar Wang
2017-04-24	Kconfig: provide MAINBOARD_HAS_TPM_CR50 option	Aaron Durbin
2017-04-19	google/gru: change kevin boot-time center logic voltage to 925mV	Douglas Anderson
2017-04-19	google/gru: change center logic voltage to 900mV	Derek Basehore
2017-04-11	scarlet/gru: skip display because mipi driver not ready	Shunqian Zheng
2017-04-06	gru: Initialize I2C bus for ARC2C0608	Philip Chen
2017-03-28	vboot: Move remaining features out of vendorcode/google/chromeos	Julius Werner
2017-03-28	vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by default	Julius Werner
2017-03-09	drivers/spi/tpm: provide Kconfig to indicate CR50 usage	Aaron Durbin
2017-03-07	google/gru: add MAX_SDRAM_FREQ config to choose max ddr freq	Shunqian Zheng
2017-02-23	google/gru: whitespace fix	Patrick Georgi
2017-02-23	google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection threshold	William wu
2017-02-23	google/gru: update the pwm regulator	Caesar Wang
2017-02-23	google/gru: improve eye diagram for passing the test	Caesar Wang
2017-02-22	google/gru: Fix whitespace	Patrick Georgi
2017-02-11	google/gru: add scarlet variant	philipchen
2017-01-22	gru: kevin: define GPIOs used on both platforms	Vadim Bendebury
2017-01-13	gru: Tuning USB 2.0 PHY0 and PHY1 host-port	William wu
2016-12-06	Bob: Update the memory ramid of bob	Shasha Zhao
2016-12-06	Bob: add bob in coreboot	Shasha Zhao
2016-12-06	rockchip/rk3399: sdram: use register to calculate sdram sizes	Lin Huang
2016-12-06	google/gru: Power-cycle USB ports in developer/recovery modes	Julius Werner
2016-12-01	lib: put romstage_handoff implementation in own compilation unit	Aaron Durbin
2016-11-29	google/gru: Tune USB 2.0 PHY to increase compatibility	William wu
2016-11-18	google/chromeec: Add common infrastructure for boot-mode switches	Furquan Shaikh
2016-11-17	google/gru: Move to one CA training pattern	Derek Basehore
2016-11-17	google/gru: Add new CA training pattern	Derek Basehore
2016-11-02	rockchip/rk3399: display: Do not allocate framebuffer in coreboot	Lin Huang
2016-11-02	rockchip/rk3399: sdram: also prepare the index1 configuration	Lin Huang
2016-10-25	rockchip/rk3399: gru/kevin: drop unused sdram configs	Lin Huang
2016-10-25	rockchip/rk3399: reset system if DDR init fails	Lin Huang
2016-10-08	google/gru: Add USB 2.0 PHY tuning for Kevin PHY0 and PHY1	William wu
2016-10-07	google/gru: drive WLAN_MODULE_RST# low as early as possible	Brian Norris
2016-10-07	google/gru: set W2W_DIFFCS_DLY to 5	Lin Huang
2016-10-07	google/gru: pass apio number to arm-trust-firmware	Lin Huang
2016-10-07	google/gru: pass the gpio power supply enable pin to bl31	Lin Huang
2016-10-06	rockchip: rk3399: improve write leveling flow	Jianqun Xu
2016-10-06	google/gru: Shrink RW_ELOG region to 4KB	Julius Werner
2016-10-06	rockchip: rk3399: improve sdram noc timing	Lin Huang
2016-10-06	rockchip/rk3399: lower kevin board sdram frequency to 800MHz	Lin Huang
2016-10-06	rockchip/rk3399: Move big CPU cluster initialization into ramstage	Julius Werner
2016-10-04	google/gru: Ensure correct pull resistors for special-function pins	Julius Werner
2016-10-04	gru: Increase SPI speed to 33MHz	Simon Glass
2016-10-04	google/gru: Init the PWM pinmux after setting up the PWM	Douglas Anderson
2016-10-02	Kconfig: Update default hex values to start with 0x	Martin Roth
2016-09-20	gru/kevin: Decrease voltage for little cpu 1.5G to 1.15v	Shunqian Zheng
2016-09-20	google/gru: Fix up PWM regulator ranges	Julius Werner
2016-09-20	Gru: Increase bit-per-pixel to 32	Daisuke Nojiri
2016-09-20	gru: Add watchdog reset support	Julius Werner
2016-09-20	gru: Add USB 2.0 PHY tuning for Kevin	Julius Werner