summaryrefslogtreecommitdiff
path: root/src/mainboard/google/gru/bootblock.c
AgeCommit message (Collapse)Author
2016-10-06rockchip/rk3399: Move big CPU cluster initialization into ramstageJulius Werner
This patch moves the big CPU cluster initialization on the RK3399 from the clock init bootblock function into ramstage. We're only really doing this to put the cluster into a sane state for the OS, we're never actually taking it out of reset ourselves... so there's no reason to do this so early. Also cleaned up the interface for rkclk_configure_cpu() a bit to make it more readable. BRANCH=None BUG=chrome-os-partner:54906 TEST=Booted Kevin. Change-Id: I568b891da0abb404760d120cef847737c1f9e3ec Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bd7aa7ec3e6d211b17ed61419f80a818cee78919 Original-Change-Id: Ic3d01a51531683b53e17addf1942441663a8ea40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/377541 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16698 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04google/gru: Ensure correct pull resistors for special-function pinsJulius Werner
Several of the special function pins we're using in firmware have a pre-assigned pull-up or pull-down on power-on reset. We don't want those to interfere with any of the signaling we're trying to do on those pins, so this patch disables them. Also do some house-cleaning to group the bootblock code better, and change the setup code for all SPI and I2C buses to first initialize the controller and then mux the pins... I assume this might be a little safer (in case the controller peripheral has some pins in a weird state before it gets fully initialized, we don't want to mux it through too early). BRANCH=None BUG=chrome-os-partner:52526 TEST=Booted Kevin. Change-Id: I4d5bd3f7657b8113d90b65d9571583142ba10a27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f8f7fd56e945987eb0b1124b699f676bc68d0560 Original-Change-Id: I6bcf2b9a5dc686f2b6f82bd80fc9a1a245661c47 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/382532 Reviewed-on: https://review.coreboot.org/16711 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04gru: Increase SPI speed to 33MHzSimon Glass
Increase the SPI bus speed to speed up boot time. The maximum supported speed at 1.8V is 37.5MHz, and 33MHz is the next lowest convenient speed, given the clock parents. BUG=chrome-os-partner:56556 BRANCH=none TEST=boot on gru and see that things still work correctly. Total time spent on reading from SPI reduces from 185ms to 141ms. Change-Id: I71436c9e343b18360fa63d528dea5cfcfbc831e6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d7576f6e53e407af61160be142c3d589e864a8cf Original-Change-Id: I55a19f523817862e081d23469e94fd795456dd67 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381313 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16708 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-20gru/kevin: Decrease voltage for little cpu 1.5G to 1.15vShunqian Zheng
In kernel side we set 1.1v for 1.5G, even for coreboot RO, a higher voltage could be safer, 1.2v now seems too high. BRANCH=none BUG=chrome-os-partner:56948 TEST=bootup Change-Id: I852e0d532369aad51b12770e2efb01aacf6662ce Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 000b5c099373be2a1f83c020ba23a0e79ea78fab Original-Change-Id: Iecc620deee553c61a330353ac160aa3a36f516df Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/380896 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16583 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru: Add watchdog reset supportJulius Werner
This patch adds support to reboot the whole board after a hardware watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to Veyron. From my tests it looks like both SRAM and PMUSRAM get preserved across warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that makes it easier to deal with in coreboot (PMUSRAM is currently not mapped as cached, so we don't need to worry about flushing the results back before reboot). BRANCH=None BUG=chrome-os-partner:56600 TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30 seconds. Confirm that system reboots correctly without entering recovery and we get a HW watchdog event in the eventlog. Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098 Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/375562 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16578 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-31rockchip/rk3399: Add pwm_regulator.c for pwm then ramp boot up cpuEric Gao
Before, we calculate the pwm duties for cpu cores and centerlogic by hand, adding pwm_regulator.c to handle this. The default pwm design min/max voltage may be different between revs. With the pwm regulator, this patch changes the little cpu frequency from 600M to 1512M, and raises CPU voltage to 1.2V correspondingly. This also means we decide to drop the ES1 because it may fail to bootup with 1.5G ~ 1.2v. BRANCH=none BUG=chrome-os-partner:54376,chrome-os-partner:54862 TEST=Bootup on kevin board Change-Id: Id04c176bddfb9cdf3d25b65736e40249a85f6aa1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ee4365c787ec523b7ee1028ea100dcfbb331b3a9 Original-Change-Id: Ide75bbd92d1cbb14f934baeec0e38862bc08402b Original-Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364410 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16368 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-18Kconfig: rename BOOT_MEDIA_SPI_BUS to BOOT_DEVICE_SPI_FLASH_BUSAaron Durbin
Provide a default value of 0 in drivers/spi as there weren't default values aside from specific mainboards and arch/x86. Remove any default 0 values while noting to keep the option's default to 0. BUG=chrome-os-partner:56151 Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16192 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03google/gru: Add code to support I2C TPM for KevinJulius Werner
Coming Kevin revisions will switch back to an I2C TPM. This patch adds the required configuration options and code to support that. Since the TPM type can currently only be changed at compile time, we can no longer support older Kevins with the same image. In order to build for Kevin revisions < 5, you have to explicitly override the CONFIG_GRU_HAS_TPM2. BRANCH=None BUG=chrome-os-partner:55523 TEST=Compiled both Kevin and Gru, confirmed that bootblock and verstage binary had the appropriate code differences. Change-Id: I1b2abe0f331eb103eb0a84f773ee7521d31ae5d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3245bff937154f0f9f39894de9c98a75631d59d9 Original-Change-Id: I81a15c9fb037a7ca2d69818e46cbb4f9a5ae1989 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/364222 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16029 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-07-25google/gru: Change UART _Static_assert() condition to #ifJulius Werner
_Static_assert() gets evaluated even when the code path it's in is unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that depend on a disabled Kconfig are always 0, meaning that CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the condition it is wrapped in to a preprocessor #if so that the _Static_assert() is not evaluated when building without serial support. BRANCH=None BUG=None TEST=Built and booted Kevin without serial Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524 Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361581 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15810 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-23gru: kevin: initialize cr50 SPI interfaceVadim Bendebury
Set up the pins and initialize the driver. BRANCH=none BUG=chrome-os-partner:50645, chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to communicate with the cr50. Change-Id: I9fc1cb84ccababa6f58b2d5beec4572dc1d79da1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 6100471db2a00fd411afc05d621429b8f8a2f81d Original-Change-Id: I0ccd8777288e35870658268813c9202dd850c70d Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349852 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/15296 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: enable EC SPI interfaceVadim Bendebury
This configures and enables SPI interface #5 used for EC communications on Gru/Kevin. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the appropriate depthcharge change it is possible to trigger booting Chrome OS from the SD card by pressing '^U' on Gru keyboard at the right time. Change-Id: I5304bf47e030c0b9b7794752f30ffdca6c03a4f4 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: b5cc177 Original-Change-Id: I99883daa60562ccddfaeb858c1957d497f05a501 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346632 Reviewed-on: https://review.coreboot.org/15032 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-08gru: kevin: configure board GPIOsVadim Bendebury
Set board GPIOs as required and add their description into the appropriate section of the coreboot table, to make them available to depthcharge. BRANCH=none BUG=chrome-os-partner:51537 TEST=with the rest of the patches applied it is possible to use keyboard on Gru, which indicates that the EC interrupt GPIO is properly configured. The rest of the pins will be verified later. Change-Id: I5818bfe855f4e7faa2114484a9b7b44c7d469727 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e02a05f Original-Change-Id: I82be76bbd3211179e696526a34cc842cb1987e69 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346631 Reviewed-on: https://review.coreboot.org/15031 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-09google/gru: enable pp1500 and pp3000 rails as soon as possibleVadim Bendebury
The idea is that they stay low unless we know that we booted from SPI flash. As this code runs in SPI flash - it is ok to turn these rails on as soon as possible, and pp3000 rail it is essential for UART to work. Kevin rev1 and Gru designs are going to be using these pins to control these rails. Kevin rev1 had those GPIO pins routed to two chip enable signals, it is save to assert them high. BRANCH=none BUG=chrome-os-partner:51537 TEST=kevin rev0 still boots (which does not prove much) TEST=run coreboot on kevin rev1 to kernel Change-Id: I5f3eb4cf5d6f04a0253574dd8b5c039eab0bae1a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 987042246672e9391087dbd5060785a379dde131 Original-Change-Id: I31bb03334ad9e3aa57db726fb43dec85014a3f05 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/341543 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/14729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: select 1.8V as gpio2ab io domainLin Huang
On kevin board, both the gpio2ab's io domain APIO2_VDDPST and APIO2_VDD are 1.8V. So gpio2ab can only output 1.8V. BRANCH=none BUG=chrome-os-partner:52510 TEST=Apply this patch, CPU1_SDIO_PWREN(GPIO2_A2) can output 1.8V Change-Id: Iefe58cf5ad83a8e79916ad177d148c1036283668 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c4afee265f3f31c1defee08cb89ab3e45ff8d1a Original-Change-Id: I0216c8efb7ef9256b878adeeee0a52335bf69f93 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/337194 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14726 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add spi clock driverShunqian Zheng
This patch implements spi clock driver and initialize SPI flash rom for the baseboard gru. There are 6 on-chip SPI controllers inside RK3399. For SPI3, it's source clk from ppll, while the others from gpll. Please refer to CRU session of TRM for detail. BRANCH=none BUG=chrome-os-partner:51537 TEST=emerge-kevin coreboot Change-Id: I597ae2cc8ba1bfaefdfbf6116027d009daa8e049 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4c6a9b0aedd427727ed4f4a821c5c54fb3a174b9 Original-Change-Id: I68ad859bf4fc5dacaaee5a2cd33418c729cf39b8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338946 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09google/gru: enable uart2 if configuredShunqian Zheng
This patch select gpio pins for UART2 which is the default debug port of rk3399. Please refer to TRM V0.3 Part1 Page 325,395 for GRF details. BRANCH=none BUG=chrome-os-partner:51537 TEST=check logs from console manually Change-Id: I91eeadd543e7e895c3972d8dd7a2195c9d78968b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0c51955e18d4ff9cd3208697666af4fa77046e0f Original-Change-Id: I960178628f4020a59d100f2f0b2a6be487892549 Original-Signed-off-by: hunag lin <hl@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/338945 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/14709 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-16google/gru: Add a stub rk3399 mainboardhuang lin
Most things still need to be filled in, but this will allow us to build boards which use this SOC. [pg: separated out from the combined commit that added both SoC and board. Added board_info.txt that will be added downstream, too.] Change-Id: I7facce7b98a5d19fb77746b1aee67fff74da8150 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840 Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332385 Reviewed-on: https://review.coreboot.org/14279 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>