summaryrefslogtreecommitdiff
path: root/src/mainboard/google/gru/Makefile.inc
AgeCommit message (Collapse)Author
2017-03-07google/gru: add MAX_SDRAM_FREQ config to choose max ddr freqShunqian Zheng
Gru/Kevin use 933 MHz (actually 928 MHz for better jitter) as max sdram frequency, while bob uses 800 MHz. It's normal some variants can't meet 928 MHz SI requirement and hence have to use a lower freq as spec. BUG=chrome-os-partner:61001 BRANCH=gru TEST=check dpll is 800 MHz on bob Change-Id: I6d19a351f25d1f48547715ce57c3a87d9505f6f1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8176bfea52422c713f144ffec419752aeca66db2 Original-Change-Id: I46afba8d091f1489feeb20cafc44decaa81601fc Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/420208 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Shasha Zhao <Sarah_Zhao@asus.com> Original-Tested-by: Shasha Zhao <Sarah_Zhao@asus.com> Original-(cherry picked from commit eba5dff79eeedae5ff608d2d8d297ccf9c13cb55) Original-Reviewed-on: https://chromium-review.googlesource.com/448277 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/18581 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25rockchip/rk3399: reset system if DDR init failsLin Huang
We found sdram may fail in pctl_cfg(), so we check the status in this function. If it exceeds 100ms still in this function, we will restart the system. We also found there are rare chances DDR training fails, so also restart system in that case. BUG=chrome-os-partner:57988 BRANCH=None TEST=coreboot resets on failure and eventually the system comes up Change-Id: Icc0688da028a8f4f81eafe36bbaa79fdf2bcea74 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89e45f8352f62e19a203316330aba14ccc5c8b11 Original-Change-Id: If4e78983abcfdfe1e0e26847448d86169e598700 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/397439 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17045 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-20gru: Add watchdog reset supportJulius Werner
This patch adds support to reboot the whole board after a hardware watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to Veyron. From my tests it looks like both SRAM and PMUSRAM get preserved across warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that makes it easier to deal with in coreboot (PMUSRAM is currently not mapped as cached, so we don't need to worry about flushing the results back before reboot). BRANCH=None BUG=chrome-os-partner:56600 TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30 seconds. Confirm that system reboots correctly without entering recovery and we get a HW watchdog event in the eventlog. Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098 Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/375562 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16578 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-31rockchip/rk3399: Add pwm_regulator.c for pwm then ramp boot up cpuEric Gao
Before, we calculate the pwm duties for cpu cores and centerlogic by hand, adding pwm_regulator.c to handle this. The default pwm design min/max voltage may be different between revs. With the pwm regulator, this patch changes the little cpu frequency from 600M to 1512M, and raises CPU voltage to 1.2V correspondingly. This also means we decide to drop the ES1 because it may fail to bootup with 1.5G ~ 1.2v. BRANCH=none BUG=chrome-os-partner:54376,chrome-os-partner:54862 TEST=Bootup on kevin board Change-Id: Id04c176bddfb9cdf3d25b65736e40249a85f6aa1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ee4365c787ec523b7ee1028ea100dcfbb331b3a9 Original-Change-Id: Ide75bbd92d1cbb14f934baeec0e38862bc08402b Original-Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364410 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16368 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31rockchip/rk3399: Move romstage.c to mainboard/gruShunqian Zheng
The romstage.c is more board related than soc specific, like setting the pwm regulators, so moving it to mainboard/gru. BRANCH=none BUG=chrome-os-partner:54819 TEST=Bootup on kevin board Change-Id: I83c6cde9f451480e47e2b4b549cedf65b345134c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 35feeb07131a6a9de4adde035236987391833474 Original-Change-Id: If2bf245302eb4fb20bb089c1b3ffa03909722443 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/375398 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16367 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27gru: Make SDRAM parameters individual struct files in CBFSJulius Werner
This patch changes Gru SDRAM parameters from structures that just get compiled into the romstage to individual CBFS files. This allows us to only load the parameter set we need for the board we're booting from flash, which reduces our boot time and the SRAM memory footprint required to hold the romstage. TEST=Booted Kevin. Change-Id: Ie88a515cbdb19a794ca0a230a56bcc82bed1e550 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16274 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-18gru: implement hw reset functionVadim Bendebury
Asserting this GPIO will send a signal to the EC to trigger a reset for the AP and the CR50. BRANCH=none BUG=chrome-os-partner:55252 TEST=the device now reboots when it needs to switch between different boot modes instead of hanging with "failed to reboot" message. Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7 Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/360238 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15718 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-10gru: include ram_code in coreboot tableVadim Bendebury
This is needed to ensure that the ram-code node is included in the device tree by depthcharge. BRANCH=none BUG=chrome-os-partner:54566 TEST=built updated firmware, booted on kevin into Linux shell, checked the device tree contents: localhost ~ # od -tx1 /proc/device-tree/firmware/coreboot/ram-code 0000000 00 00 00 01 0000004 localhost # Change-Id: Ibe96e3bc8fc0106013241738f5726783d74bd78b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 53c002114f7044b88728c9e17150cd3a2cf1f80f Original-Change-Id: Iba573fba9f9b88b87867c6963e48215e254319ed Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354705 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15566 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-09google/gru: Determine Board ID based on the input voltage of ADC1Vadim Bendebury
The Board ID on the Gru family of boards is determined by reading the voltage from a resistor divider, each hardware revision is supposed to have a unique resistor ratio, which allows to distinctly tell between different Board ID. While the long time approach to mapping resistor ratios (and voltages) into Board ID remains under discussion, we know for sure the values for Proto 1 and Proto 2. Let's just use them for now. Since Board ID can be queried multiple times during boot, ideally it should be read once and placed in the coreboot table to be available to all coreboot stages. For now we just cache it so that at least during the same stage the ADC has to run only once. BRANCH=None BUG=chrome-os-partner:51537 TEST=verified that the voltage reading on Proto 1 is as expected, and Board ID 0 is reported. Change-Id: I94bc7fc235dae4155feb6ca35b5ef0ab20c3ec9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bb4064d0af8174b6ae247cdad9378b7f4e5f22ba Original-Change-Id: I105ea97f8862b5707b582904c6f2e3e9406a0f07 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/340428 Original-Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/14722 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-09rockchip: rk3399: add sdram driverLin Huang
Add the sdram driver for rk3399. With this patch we can boot into depthcharge. This patch also include a config file for lpddr3-hynix-4GB that generated bases on its datasheet. Please refer to TRM V0.3 Part1 Chapter 9 for DMC. BRANCH=none BUG=chrome-os-partner:51537 TEST=boot to depthcharge on kevin Change-Id: I2afcaa3b68dbad77a5fe677b835289b675ed2bef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5d777e29942057fb7237eefa34051d1f54b19405 Original-Change-Id: Ifa1fe98a7058869518757d50678a64620610d91d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332562 Reviewed-on: https://review.coreboot.org/14716 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-16google/gru: Incorporate feedback to #14279Patrick Georgi
To avoid diverging too much on an actively developed code base, keep the changes to a separate commit that can be downstreamed more easily: - removed unused includes - gave kevin board a "Kevin" part number - marked RW_LEGACY as CBFS region (to follow up upstream changes) - moved romstage entry point to SoC code (instead of encouraging per-board copy pasta) Change-Id: Ief0c8db3c4af96fe2be2e2397d8874ad06fb6f1f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14362 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-16google/gru: Add a stub rk3399 mainboardhuang lin
Most things still need to be filled in, but this will allow us to build boards which use this SOC. [pg: separated out from the combined commit that added both SoC and board. Added board_info.txt that will be added downstream, too.] Change-Id: I7facce7b98a5d19fb77746b1aee67fff74da8150 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840 Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332385 Reviewed-on: https://review.coreboot.org/14279 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>